/**************************************************************************** * examples/posix_spawn/spawn_main.c * * Copyright (C) 2013, 2018 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "filesystem/romfs.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Check configuration. This is not all of the configuration settings that * are required -- only the more obvious. */ #if CONFIG_NFILE_DESCRIPTORS < 1 # error "You must provide file descriptors via CONFIG_NFILE_DESCRIPTORS in your configuration file" #endif #ifdef CONFIG_BINFMT_DISABLE # error "The binary loader is disabled (CONFIG_BINFMT_DISABLE)!" #endif #ifndef CONFIG_ELF # error "You must select CONFIG_ELF in your configuration file" #endif #ifndef CONFIG_FS_ROMFS # error "You must select CONFIG_FS_ROMFS in your configuration file" #endif #ifdef CONFIG_DISABLE_MOUNTPOINT # error "You must not disable mountpoints via CONFIG_DISABLE_MOUNTPOINT in your configuration file" #endif #ifdef CONFIG_BINFMT_DISABLE # error "You must not disable loadable modules via CONFIG_BINFMT_DISABLE in your configuration file" #endif #ifndef CONFIG_LIB_BOARDCTL # error "This configuration requires CONFIG_LIB_BOARDCTL" #endif #ifndef CONFIG_BOARDCTL_APP_SYMTAB # error "You must enable the symobol table interface with CONFIG_BOARDCTL_APP_SYMTAB" #endif /* Describe the ROMFS file system */ #define SECTORSIZE 512 #define NSECTORS(b) (((b)+SECTORSIZE-1)/SECTORSIZE) #define MOUNTPT "/mnt/romfs" #ifndef CONFIG_EXAMPLES_ELF_DEVMINOR # define CONFIG_EXAMPLES_ELF_DEVMINOR 0 #endif #ifndef CONFIG_EXAMPLES_ELF_DEVPATH # define CONFIG_EXAMPLES_ELF_DEVPATH "/dev/ram0" #endif /* If CONFIG_DEBUG_FEATURES is enabled, use info/err instead of printf so that the * output will be synchronous with the debug output. */ #ifdef CONFIG_CPP_HAVE_VARARGS # ifdef CONFIG_DEBUG_FEATURES # define message(format, ...) _info(format, ##__VA_ARGS__) # define errmsg(format, ...) _err(format, ##__VA_ARGS__) # else # define message(format, ...) printf(format, ##__VA_ARGS__) # define errmsg(format, ...) fprintf(stderr, format, ##__VA_ARGS__) # endif #else # ifdef CONFIG_DEBUG_FEATURES # define message _info # define errmsg _err # else # define message printf # define errmsg printf # endif #endif /**************************************************************************** * Private Types ****************************************************************************/ /**************************************************************************** * Private Data ****************************************************************************/ static unsigned int g_mminitial; /* Initial memory usage */ static unsigned int g_mmstep; /* Memory Usage at beginning of test step */ static const char delimiter[] = "****************************************************************************"; static const char g_redirect[] = "redirect"; static const char g_hello[] = "hello"; static const char g_data[] = "testdata.txt"; static char fullpath[128]; static char * const g_argv[4] = { "Argument 1", "Argument 2", "Argument 3", NULL }; /**************************************************************************** * Symbols from Auto-Generated Code ****************************************************************************/ extern const struct symtab_s g_spawn_exports[]; extern const int g_spawn_nexports; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: mm_update ****************************************************************************/ static void mm_update(FAR unsigned int *previous, FAR const char *msg) { struct mallinfo mmcurrent; /* Get the current memory usage */ #ifdef CONFIG_CAN_PASS_STRUCTS mmcurrent = mallinfo(); #else (void)mallinfo(&mmcurrent); #endif /* Show the change from the previous time */ printf("\nMemory Usage %s:\n", msg); printf(" Before: %8u After: %8u Change: %8d\n", *previous, mmcurrent.uordblks, (int)mmcurrent.uordblks - (int)*previous); /* Set up for the next test */ *previous = mmcurrent.uordblks; } /**************************************************************************** * Name: mm_initmonitor ****************************************************************************/ static void mm_initmonitor(void) { struct mallinfo mmcurrent; #ifdef CONFIG_CAN_PASS_STRUCTS mmcurrent = mallinfo(); #else (void)mallinfo(&mmcurrent); #endif g_mminitial = mmcurrent.uordblks; g_mmstep = mmcurrent.uordblks; printf("Initial memory usage: %d\n", mmcurrent.uordblks); } /**************************************************************************** * Name: testheader ****************************************************************************/ static inline void testheader(FAR const char *progname) { message("\n%s\n* Executing %s\n%s\n\n", delimiter, progname, delimiter); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: spawn_main ****************************************************************************/ #ifdef BUILD_MODULE int main(int argc, FAR char *argv[]) #else int spawn_main(int argc, char *argv[]) #endif { struct boardioc_symtab_s symdesc; posix_spawn_file_actions_t file_actions; posix_spawnattr_t attr; FAR const char *filepath; pid_t pid; int ret; /* Initialize the memory monitor */ mm_initmonitor(); /* Create a ROM disk for the ROMFS filesystem */ message("Registering romdisk at /dev/ram%d\n", CONFIG_EXAMPLES_ELF_DEVMINOR); ret = romdisk_register(CONFIG_EXAMPLES_ELF_DEVMINOR, (FAR uint8_t *)romfs_img, NSECTORS(romfs_img_len), SECTORSIZE); if (ret < 0) { errmsg("ERROR: romdisk_register failed: %d\n", ret); exit(1); } mm_update(&g_mmstep, "after romdisk_register"); /* Mount the file system */ message("Mounting ROMFS filesystem at target=%s with source=%s\n", MOUNTPT, CONFIG_EXAMPLES_ELF_DEVPATH); ret = mount(CONFIG_EXAMPLES_ELF_DEVPATH, MOUNTPT, "romfs", MS_RDONLY, NULL); if (ret < 0) { errmsg("ERROR: mount(%s,%s,romfs) failed: %s\n", CONFIG_EXAMPLES_ELF_DEVPATH, MOUNTPT, errno); } mm_update(&g_mmstep, "after mount"); /* Does the system support the PATH variable? Has the PATH variable * already been set? If YES and NO, then set the PATH variable to * the ROMFS mountpoint. */ #if defined(CONFIG_BINFMT_EXEPATH) && !defined(CONFIG_PATH_INITIAL) (void)setenv("PATH", MOUNTPT, 1); #endif /* Make sure that we are using our symbol tablee */ symdesc.symtab = (FAR struct symtab_s *)g_spawn_exports; /* Discard 'const' */ symdesc.nsymbols = g_spawn_nexports; (void)boardctl(BOARDIOC_APP_SYMTAB, (uintptr_t)&symdesc); /************************************************************************* * Case 1: Simple program with arguments *************************************************************************/ /* Output a separator so that we can clearly discriminate the output of * this program from the others. */ testheader(g_hello); /* Initialize the attributes file actions structure */ ret = posix_spawn_file_actions_init(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_init failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_init(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_init failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr init"); /* If the binary loader does not support the PATH variable, then * create the full path to the executable program. Otherwise, * use the relative path so that the binary loader will have to * search the PATH variable to find the executable. */ #ifdef CONFIG_BINFMT_EXEPATH filepath = g_hello; #else snprintf(fullpath, 128, "%s/%s", MOUNTPT, g_hello); filepath = fullpath; #endif /* Execute the program */ mm_update(&g_mmstep, "before posix_spawn"); ret = posix_spawn(&pid, filepath, &file_actions, &attr, NULL, (FAR char * const*)&g_argv); if (ret != 0) { errmsg("ERROR: posix_spawn failed: %d\n", ret); } sleep(4); mm_update(&g_mmstep, "after posix_spawn"); /* Free attributes and file actions */ ret = posix_spawn_file_actions_destroy(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_destroy failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_destroy(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_destroy failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr destruction"); /************************************************************************* * Case 2: Simple program with redirection of stdin to a file input *************************************************************************/ /* Output a separator so that we can clearly discriminate the output of * this program from the others. */ testheader(g_redirect); /* Initialize the attributes file actions structure */ ret = posix_spawn_file_actions_init(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_init failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_init(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_init failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr init"); /* Set up to close stdin (0) and open testdata.txt as the program input */ ret = posix_spawn_file_actions_addclose(&file_actions, 0); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_addclose failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); snprintf(fullpath, 128, "%s/%s", MOUNTPT, g_data); ret = posix_spawn_file_actions_addopen(&file_actions, 0, fullpath, O_RDONLY, 0644); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_addopen failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); mm_update(&g_mmstep, "after adding file_actions"); /* If the binary loader does not support the PATH variable, then * create the full path to the executable program. Otherwise, * use the relative path so that the binary loader will have to * search the PATH variable to find the executable. */ #ifdef CONFIG_BINFMT_EXEPATH filepath = g_redirect; #else snprintf(fullpath, 128, "%s/%s", MOUNTPT, g_redirect); filepath = fullpath; #endif /* Execute the program */ mm_update(&g_mmstep, "before posix_spawn"); ret = posix_spawn(&pid, filepath, &file_actions, &attr, NULL, NULL); if (ret != 0) { errmsg("ERROR: posix_spawn failed: %d\n", ret); } sleep(2); mm_update(&g_mmstep, "after posix_spawn"); /* Free attibutes and file actions */ ret = posix_spawn_file_actions_destroy(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_destroy failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_destroy(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_destroy failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr destruction"); /* Clean-up */ mm_update(&g_mmstep, "End-of-Test"); return 0; }