/**************************************************************************** * apps/nshlib/nsh_parse.c * * Copyright (C) 2007-2013, 2014, 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #ifdef CONFIG_NSH_CMDPARMS # include #endif #include #include "nshlib/nshlib.h" #include "nsh.h" #include "nsh_console.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* If CONFIG_NSH_CMDPARMS or CONFIG_NSH_ARGCAT is enabled, then we will need * retain a list of memory allocations to be freed at the completion of * command processing. */ #undef HAVE_MEMLIST #if defined(CONFIG_NSH_CMDPARMS) || defined(CONFIG_NSH_ARGCAT) # define HAVE_MEMLIST 1 #endif #if defined(HAVE_MEMLIST) && !defined(CONFIG_NSH_MAXALLOCS) # ifdef CONFIG_NSH_ARGCAT # define CONFIG_NSH_MAXALLOCS (2*CONFIG_NSH_MAXARGUMENTS) # else # define CONFIG_NSH_MAXALLOCS CONFIG_NSH_MAXARGUMENTS # endif #endif /* Allocation list helper macros */ #ifdef HAVE_MEMLIST # define NSH_MEMLIST_TYPE struct nsh_memlist_s # define NSH_MEMLIST_INIT(m) memset(&(m), 0, sizeof(struct nsh_memlist_s)); # define NSH_MEMLIST_ADD(m,a) nsh_memlist_add(m,a) # define NSH_MEMLIST_FREE(m) nsh_memlist_free(m) #else # define NSH_MEMLIST_TYPE uint8_t # define NSH_MEMLIST_INIT(m) do { (m) = 0; } while (0) # define NSH_MEMLIST_ADD(m,a) # define NSH_MEMLIST_FREE(m) #endif /**************************************************************************** * Private Types ****************************************************************************/ /* These structure describes the parsed command line */ #ifndef CONFIG_NSH_DISABLEBG struct cmdarg_s { FAR struct nsh_vtbl_s *vtbl; /* For front-end interaction */ int fd; /* FD for output redirection */ int argc; /* Number of arguments in argv */ FAR char *argv[MAX_ARGV_ENTRIES]; /* Argument list */ }; #endif /* This structure describes the allocation list */ #ifdef HAVE_MEMLIST struct nsh_memlist_s { int nallocs; /* Number of allocations */ FAR char *allocations[CONFIG_NSH_MAXALLOCS]; }; #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ #ifdef HAVE_MEMLIST static void nsh_memlist_add(FAR struct nsh_memlist_s *memlist, FAR char *allocation); static void nsh_memlist_free(FAR struct nsh_memlist_s *memlist); #endif #ifndef CONFIG_NSH_DISABLEBG static void nsh_releaseargs(struct cmdarg_s *arg); static pthread_addr_t nsh_child(pthread_addr_t arg); static struct cmdarg_s *nsh_cloneargs(FAR struct nsh_vtbl_s *vtbl, int fd, int argc, char *argv[]); #endif static int nsh_saveresult(FAR struct nsh_vtbl_s *vtbl, bool result); static int nsh_execute(FAR struct nsh_vtbl_s *vtbl, int argc, FAR char *argv[], FAR const char *redirfile, int oflags); #ifdef CONFIG_NSH_CMDPARMS static FAR char *nsh_filecat(FAR struct nsh_vtbl_s *vtbl, FAR char *s1, FAR const char *filename); static FAR char *nsh_cmdparm(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline, FAR char **allocation); #endif #ifdef CONFIG_NSH_ARGCAT static FAR char *nsh_strcat(FAR struct nsh_vtbl_s *vtbl, FAR char *s1, FAR const char *s2); #endif #ifndef CONFIG_DISABLE_ENVIRON static FAR char *nsh_envexpand(FAR struct nsh_vtbl_s *vtbl, FAR char *varname); #endif static FAR char *nsh_argexpand(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline, FAR char **allocation); static FAR char *nsh_argument(FAR struct nsh_vtbl_s *vtbl, char **saveptr, FAR NSH_MEMLIST_TYPE *memlist); #ifndef CONFIG_NSH_DISABLESCRIPT #ifndef CONFIG_NSH_DISABLE_LOOPS static bool nsh_loop_enabled(FAR struct nsh_vtbl_s *vtbl); #endif #ifndef CONFIG_NSH_DISABLE_ITEF static bool nsh_itef_enabled(FAR struct nsh_vtbl_s *vtbl); #endif static bool nsh_cmdenabled(FAR struct nsh_vtbl_s *vtbl); #ifndef CONFIG_NSH_DISABLE_LOOPS static int nsh_loop(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr, FAR NSH_MEMLIST_TYPE *memlist); #endif #ifndef CONFIG_NSH_DISABLE_ITEF static int nsh_itef(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr, FAR NSH_MEMLIST_TYPE *memlist); #endif #endif #ifndef CONFIG_NSH_DISABLEBG static int nsh_nice(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr, FAR NSH_MEMLIST_TYPE *memlist); #endif #ifdef CONFIG_NSH_CMDPARMS static int nsh_parse_cmdparm(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline, FAR const char *redirfile); #endif static int nsh_parse_command(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline); /**************************************************************************** * Private Data ****************************************************************************/ static const char g_token_separator[] = " \t\n"; #ifndef NSH_DISABLE_SEMICOLON static const char g_line_separator[] = "\"#;\n"; #endif #ifdef CONFIG_NSH_ARGCAT static const char g_arg_separator[] = "`$"; #endif static const char g_redirect1[] = ">"; static const char g_redirect2[] = ">>"; #ifndef CONFIG_DISABLE_ENVIRON static const char g_exitstatus[] = "?"; static const char g_success[] = "0"; static const char g_failure[] = "1"; #endif static const char g_nullstring[] = ""; /**************************************************************************** * Public Data ****************************************************************************/ /* If NuttX versioning information is available, Include that information * in the NSH greeting. */ #if CONFIG_VERSION_MAJOR != 0 || CONFIG_VERSION_MINOR != 0 const char g_nshgreeting[] = "\nNuttShell (NSH) NuttX-" CONFIG_VERSION_STRING "\n"; #else const char g_nshgreeting[] = "\nNuttShell (NSH)\n"; #endif /* Fixed Message of the Day (MOTD) */ #if defined(CONFIG_NSH_MOTD) && !defined(CONFIG_NSH_PLATFORM_MOTD) const char g_nshmotd[] = CONFIG_NSH_MOTD_STRING; #endif /* Telnet login prompts */ #ifdef CONFIG_NSH_LOGIN #if defined(CONFIG_NSH_TELNET_LOGIN) && defined(CONFIG_NSH_TELNET) const char g_telnetgreeting[] = "\nWelcome to NuttShell(NSH) Telnet Server...\n"; #endif const char g_userprompt[] = "login: "; const char g_passwordprompt[] = "password: "; const char g_loginsuccess[] = "\nUser Logged-in!\n"; const char g_badcredentials[] = "\nInvalid username or password\n"; const char g_loginfailure[] = "Login failed!\n"; #endif /* The NSH prompt */ const char g_nshprompt[] = "nsh> "; /* Common, message formats */ const char g_fmtsyntax[] = "nsh: %s: syntax error\n"; const char g_fmtargrequired[] = "nsh: %s: missing required argument(s)\n"; const char g_fmtnomatching[] = "nsh: %s: no matching %s\n"; const char g_fmtarginvalid[] = "nsh: %s: argument invalid\n"; const char g_fmtargrange[] = "nsh: %s: value out of range\n"; const char g_fmtcmdnotfound[] = "nsh: %s: command not found\n"; const char g_fmtnosuch[] = "nsh: %s: no such %s: %s\n"; const char g_fmttoomanyargs[] = "nsh: %s: too many arguments\n"; const char g_fmtdeepnesting[] = "nsh: %s: nesting too deep\n"; const char g_fmtcontext[] = "nsh: %s: not valid in this context\n"; #ifdef CONFIG_NSH_STRERROR const char g_fmtcmdfailed[] = "nsh: %s: %s failed: %s\n"; #else const char g_fmtcmdfailed[] = "nsh: %s: %s failed: %d\n"; #endif const char g_fmtcmdoutofmemory[] = "nsh: %s: out of memory\n"; const char g_fmtinternalerror[] = "nsh: %s: Internal error\n"; #ifndef CONFIG_DISABLE_SIGNALS const char g_fmtsignalrecvd[] = "nsh: %s: Interrupted by signal\n"; #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nsh_memlist_add ****************************************************************************/ #ifdef HAVE_MEMLIST static void nsh_memlist_add(FAR struct nsh_memlist_s *memlist, FAR char *allocation) { if (memlist && allocation) { int index = memlist->nallocs; if (index < CONFIG_NSH_MAXALLOCS) { memlist->allocations[index] = allocation; memlist->nallocs = index + 1; } } } #endif /**************************************************************************** * Name: nsh_memlist_free ****************************************************************************/ #ifdef HAVE_MEMLIST static void nsh_memlist_free(FAR struct nsh_memlist_s *memlist) { if (memlist) { int index; for (index = 0; index < memlist->nallocs; index++) { free(memlist->allocations[index]); memlist->allocations[index] = NULL; } memlist->nallocs = 0; } } #endif /**************************************************************************** * Name: nsh_releaseargs ****************************************************************************/ #ifndef CONFIG_NSH_DISABLEBG static void nsh_releaseargs(struct cmdarg_s *arg) { FAR struct nsh_vtbl_s *vtbl = arg->vtbl; int i; #if CONFIG_NFILE_STREAMS > 0 /* If the output was redirected, then file descriptor should * be closed. The created task has its one, independent copy of * the file descriptor */ if (vtbl->np.np_redirect) { (void)close(arg->fd); } #endif /* Released the cloned vtbl instance */ nsh_release(vtbl); /* Release the cloned args */ for (i = 0; i < arg->argc; i++) { free(arg->argv[i]); } free(arg); } #endif /**************************************************************************** * Name: nsh_child ****************************************************************************/ #ifndef CONFIG_NSH_DISABLEBG static pthread_addr_t nsh_child(pthread_addr_t arg) { struct cmdarg_s *carg = (struct cmdarg_s *)arg; int ret; _info("BG %s\n", carg->argv[0]); /* Execute the specified command on the child thread */ ret = nsh_command(carg->vtbl, carg->argc, carg->argv); /* Released the cloned arguments */ _info("BG %s complete\n", carg->argv[0]); nsh_releaseargs(carg); return (pthread_addr_t)((uintptr_t)ret); } #endif /**************************************************************************** * Name: nsh_cloneargs ****************************************************************************/ #ifndef CONFIG_NSH_DISABLEBG static struct cmdarg_s *nsh_cloneargs(FAR struct nsh_vtbl_s *vtbl, int fd, int argc, char *argv[]) { struct cmdarg_s *ret = (struct cmdarg_s *)zalloc(sizeof(struct cmdarg_s)); int i; if (ret) { ret->vtbl = vtbl; ret->fd = fd; ret->argc = argc; for (i = 0; i < argc; i++) { ret->argv[i] = strdup(argv[i]); } } return ret; } #endif /**************************************************************************** * Name: nsh_saveresult ****************************************************************************/ static int nsh_saveresult(FAR struct nsh_vtbl_s *vtbl, bool result) { struct nsh_parser_s *np = &vtbl->np; #ifndef CONFIG_NSH_DISABLESCRIPT #ifndef CONFIG_NSH_DISABLE_LOOPS /* Check if we are waiting for the condition associated with a while * token. * * while ; do ; done * * Execute as long as has an exit status of * zero. */ if (np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_WHILE) { np->np_fail = false; np->np_lpstate[np->np_lpndx].lp_enable = (result == OK); return OK; } /* Check if we are waiting for the condition associated with an until * token. * * until ; do ; done * * Execute as long as has a non-zero exit * status. */ else if (np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_UNTIL) { np->np_fail = false; np->np_lpstate[np->np_lpndx].lp_enable = (result != OK); return OK; } else #endif #ifndef CONFIG_NSH_DISABLE_ITEF /* Check if we are waiting for the condition associated with an if token */ if (np->np_iestate[np->np_iendx].ie_state == NSH_ITEF_IF) { np->np_fail = false; np->np_iestate[np->np_iendx].ie_ifcond = result; return OK; } else #endif #endif { np->np_fail = result; return result ? ERROR : OK; } } /**************************************************************************** * Name: nsh_execute ****************************************************************************/ static int nsh_execute(FAR struct nsh_vtbl_s *vtbl, int argc, FAR char *argv[], FAR const char *redirfile, int oflags) { #if CONFIG_NFILE_STREAMS > 0 || !defined(CONFIG_NSH_DISABLEBG) int fd = -1; #endif int ret; /* Does this command correspond to an application filename? * nsh_fileapp() returns: * * -1 (ERROR) if the application task corresponding to 'argv[0]' could not * be started (possibly because it does not exist). * 0 (OK) if the application task corresponding to 'argv[0]' was * and successfully started. If CONFIG_SCHED_WAITPID is * defined, this return value also indicates that the * application returned successful status (EXIT_SUCCESS) * 1 If CONFIG_SCHED_WAITPID is defined, then this return value * indicates that the application task was spawned successfully * but returned failure exit status. * * Note the priority is not effected by nice-ness. */ #ifdef CONFIG_NSH_FILE_APPS ret = nsh_fileapp(vtbl, argv[0], argv, redirfile, oflags); if (ret >= 0) { /* nsh_fileapp() returned 0 or 1. This means that the built-in * command was successfully started (although it may not have ran * successfully). So certainly it is not an NSH command. */ /* Save the result: success if 0; failure if 1 */ return nsh_saveresult(vtbl, ret != OK); } /* No, not a file name command (or, at least, we were unable to start a * program of that name). Maybe it is a built-in application or an NSH * command. */ #endif /* Does this command correspond to a built-in command? * nsh_builtin() returns: * * -1 (ERROR) if the application task corresponding to 'argv[0]' could not * be started (possibly because it doesn not exist). * 0 (OK) if the application task corresponding to 'argv[0]' was * and successfully started. If CONFIG_SCHED_WAITPID is * defined, this return value also indicates that the * application returned successful status (EXIT_SUCCESS) * 1 If CONFIG_SCHED_WAITPID is defined, then this return value * indicates that the application task was spawned successfully * but returned failure exit status. * * Note the priority if not effected by nice-ness. */ #if defined(CONFIG_NSH_BUILTIN_APPS) && (!defined(CONFIG_NSH_FILE_APPS) || !defined(CONFIG_FS_BINFS)) #if CONFIG_NFILE_STREAMS > 0 ret = nsh_builtin(vtbl, argv[0], argv, redirfile, oflags); #else ret = nsh_builtin(vtbl, argv[0], argv, NULL, 0); #endif if (ret >= 0) { /* nsh_builtin() returned 0 or 1. This means that the built-in * command was successfully started (although it may not have ran * successfully). So certainly it is not an NSH command. */ /* Save the result: success if 0; failure if 1 */ return nsh_saveresult(vtbl, ret != OK); } /* No, not a built in command (or, at least, we were unable to start a * built-in command of that name). Treat it like an NSH command. */ #endif #if CONFIG_NFILE_STREAMS > 0 /* Redirected output? */ if (vtbl->np.np_redirect) { /* Open the redirection file. This file will eventually * be closed by a call to either nsh_release (if the command * is executed in the background) or by nsh_undirect if the * command is executed in the foreground. */ fd = open(redirfile, oflags, 0666); if (fd < 0) { nsh_output(vtbl, g_fmtcmdfailed, argv[0], "open", NSH_ERRNO); goto errout; } } #endif /* Handle the case where the command is executed in background. * However is app is to be started as built-in new process will * be created anyway, so skip this step. */ #ifndef CONFIG_NSH_DISABLEBG if (vtbl->np.np_bg) { struct sched_param param; struct nsh_vtbl_s *bkgvtbl; struct cmdarg_s *args; pthread_attr_t attr; pthread_t thread; /* Get a cloned copy of the vtbl with reference count=1. * after the command has been processed, the nsh_release() call * at the end of nsh_child() will destroy the clone. */ bkgvtbl = nsh_clone(vtbl); if (!bkgvtbl) { goto errout_with_redirect; } /* Create a container for the command arguments */ args = nsh_cloneargs(bkgvtbl, fd, argc, argv); if (!args) { nsh_release(bkgvtbl); goto errout_with_redirect; } #if CONFIG_NFILE_STREAMS > 0 /* Handle redirection of output via a file descriptor */ if (vtbl->np.np_redirect) { (void)nsh_redirect(bkgvtbl, fd, NULL); } #endif /* Get the execution priority of this task */ ret = sched_getparam(0, ¶m); if (ret != 0) { nsh_output(vtbl, g_fmtcmdfailed, argv[0], "sched_getparm", NSH_ERRNO); nsh_releaseargs(args); nsh_release(bkgvtbl); goto errout; } /* Determine the priority to execute the command */ if (vtbl->np.np_nice != 0) { int priority = param.sched_priority - vtbl->np.np_nice; if (vtbl->np.np_nice < 0) { int max_priority = sched_get_priority_max(SCHED_NSH); if (priority > max_priority) { priority = max_priority; } } else { int min_priority = sched_get_priority_min(SCHED_NSH); if (priority < min_priority) { priority = min_priority; } } param.sched_priority = priority; } /* Set up the thread attributes */ (void)pthread_attr_init(&attr); (void)pthread_attr_setschedpolicy(&attr, SCHED_NSH); (void)pthread_attr_setschedparam(&attr, ¶m); /* Execute the command as a separate thread at the appropriate priority */ ret = pthread_create(&thread, &attr, nsh_child, (pthread_addr_t)args); if (ret != 0) { nsh_output(vtbl, g_fmtcmdfailed, argv[0], "pthread_create", NSH_ERRNO_OF(ret)); nsh_releaseargs(args); nsh_release(bkgvtbl); goto errout; } /* Detach from the pthread since we are not going to join with it. * Otherwise, we would have a memory leak. */ (void)pthread_detach(thread); nsh_output(vtbl, "%s [%d:%d]\n", argv[0], thread, param.sched_priority); } else #endif { #if CONFIG_NFILE_STREAMS > 0 uint8_t save[SAVE_SIZE]; /* Handle redirection of output via a file descriptor */ if (vtbl->np.np_redirect) { nsh_redirect(vtbl, fd, save); } #endif /* Then execute the command in "foreground" -- i.e., while the user waits * for the next prompt. nsh_command will return: * * -1 (ERRROR) if the command was unsuccessful * 0 (OK) if the command was successful */ ret = nsh_command(vtbl, argc, argv); #if CONFIG_NFILE_STREAMS > 0 /* Restore the original output. Undirect will close the redirection * file descriptor. */ if (vtbl->np.np_redirect) { nsh_undirect(vtbl, save); } #endif /* Mark errors so that it is possible to test for non-zero return values * in nsh scripts. */ if (ret < 0) { goto errout; } } /* Return success if the command succeeded (or at least, starting of the * command task succeeded). */ return nsh_saveresult(vtbl, false); #ifndef CONFIG_NSH_DISABLEBG errout_with_redirect: #if CONFIG_NFILE_STREAMS > 0 if (vtbl->np.np_redirect) { close(fd); } #endif #endif errout: return nsh_saveresult(vtbl, true); } /**************************************************************************** * Name: nsh_filecat ****************************************************************************/ #ifdef CONFIG_NSH_CMDPARMS static FAR char *nsh_filecat(FAR struct nsh_vtbl_s *vtbl, FAR char *s1, FAR const char *filename) { struct stat buf; size_t s1size = 0; size_t allocsize; ssize_t nbytesread; FAR char *argument; int index; int fd; int ret; /* Get the size of the string */ if (s1) { s1size = (size_t)strlen(s1); } /* Get the size of file */ ret = stat(filename, &buf); if (ret != 0) { nsh_output(vtbl, g_fmtcmdfailed, "``", "stat", NSH_ERRNO); return NULL; } /* Get the total allocation size */ allocsize = s1size + (size_t)buf.st_size + 1; argument = (FAR char *)realloc(s1, allocsize); if (!argument) { nsh_output(vtbl, g_fmtcmdoutofmemory, "``"); return NULL; } /* Open the source file for reading */ fd = open(filename, O_RDONLY); if (fd < 0) { nsh_output(vtbl, g_fmtcmdfailed, "``", "open", NSH_ERRNO); goto errout_with_alloc; } /* Now copy the file. Loop until the entire file has been transferred to * the allocated string (after the original contents of s1size bytes. */ for (index = s1size; index < allocsize - 1; ) { /* Loop until we successfully read something , we encounter the * end-of-file, or until a read error occurs */ do { nbytesread = read(fd, &argument[index], IOBUFFERSIZE); if (nbytesread == 0) { /* Unexpected end of file -- Break out of the loop */ break; } else if (nbytesread < 0) { /* EINTR is not an error (but will still stop the copy) */ #ifndef CONFIG_DISABLE_SIGNALS if (errno == EINTR) { nsh_output(vtbl, g_fmtsignalrecvd, "``"); } else #endif { /* Read error */ nsh_output(vtbl, g_fmtcmdfailed, "``", "read", NSH_ERRNO); } goto errout_with_fd; } } while (nbytesread <= 0); /* Update the index based upon the number of bytes read */ index += nbytesread; } /* Make sure that the new string is null terminated */ argument[index] = '\0'; /* Close the temporary file and return the concatenated value */ close (fd); return argument; errout_with_fd: close(fd); errout_with_alloc: free(argument); return NULL; } #endif /**************************************************************************** * Name: nsh_cmdparm ****************************************************************************/ #ifdef CONFIG_NSH_CMDPARMS static FAR char *nsh_cmdparm(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline, FAR char **allocation) { FAR char *tmpfile; FAR char *argument; int ret; /* We cannot process the command argument if there is no allocation pointer */ if (!allocation) { return (FAR char *)g_nullstring; } /* Create a unique file name using the task ID */ tmpfile = NULL; ret = asprintf(&tmpfile, "%s/TMP%d.dat", CONFIG_LIBC_TMPDIR, getpid()); if (ret < 0 || !tmpfile) { nsh_output(vtbl, g_fmtcmdoutofmemory, "``"); return (FAR char *)g_nullstring; } /* Execute the command that will re-direct the output of the command to * the temporary file. This is a simple command that can't handle most * options. */ ret = nsh_parse_cmdparm(vtbl, cmdline, tmpfile); if (ret != OK) { /* Report the failure */ nsh_output(vtbl, g_fmtcmdfailed, "``", "exec", NSH_ERRNO); free(tmpfile); return (FAR char *)g_nullstring; } /* Concatenate the file contents with the current allocation */ argument = nsh_filecat(vtbl, *allocation, tmpfile); *allocation = argument; /* We can now unlink the tmpfile and free the tmpfile string */ ret = unlink(tmpfile); if (ret < 0) { nsh_output(vtbl, g_fmtcmdfailed, "``", "unlink", NSH_ERRNO); } free(tmpfile); return argument; } #endif /**************************************************************************** * Name: nsh_strcat ****************************************************************************/ #ifdef CONFIG_NSH_ARGCAT static FAR char *nsh_strcat(FAR struct nsh_vtbl_s *vtbl, FAR char *s1, FAR const char *s2) { FAR char *argument; int s1size = 0; int allocsize; /* Get the size of the first string... it might be NULL */ if (s1) { s1size = strlen(s1); } /* Then reallocate the first string so that it is large enough to hold * both (including the NUL terminator). */ allocsize = s1size + strlen(s2) + 1; argument = (FAR char *)realloc(s1, allocsize); if (!argument) { nsh_output(vtbl, g_fmtcmdoutofmemory, "$"); argument = s1; } else { argument[s1size] = '\0'; /* (In case s1 was NULL) */ strcat(argument, s2); } return argument; } #endif /**************************************************************************** * Name: nsh_envexpand ****************************************************************************/ #ifndef CONFIG_DISABLE_ENVIRON static FAR char *nsh_envexpand(FAR struct nsh_vtbl_s *vtbl, FAR char *varname) { /* Check for built-in variables */ if (strcmp(varname, g_exitstatus) == 0) { if (vtbl->np.np_fail) { return (FAR char *)g_failure; } else { return (FAR char *)g_success; } } /* Not a built-in? Return the value of the environment variable with this * name. */ else { FAR char *value = getenv(varname); if (value) { return value; } else { return (FAR char *)g_nullstring; } } } #endif /**************************************************************************** * Name: nsh_argexpand ****************************************************************************/ #if defined(CONFIG_NSH_ARGCAT) && defined(HAVE_MEMLIST) static FAR char *nsh_argexpand(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline, FAR char **allocation) { FAR char *working = cmdline; FAR char *argument = NULL; FAR char *ptr; size_t len; /* Loop until all of the commands on the command line have been processed */ for (;;) { /* Look for interesting things within the command string. */ len = strcspn(working, g_arg_separator); ptr = working + len; /* If ptr points to the NUL terminator, then there is nothing else * interesting in the argument. */ if (*ptr == '\0') { /* Was anything previously concatenated? */ if (argument) { /* Yes, then we probably need to add the last part of the argument * beginning at the last working pointer to the concatenated * argument. * * On failures to allocation memory, nsh_strcat will just return * value value of argument */ argument = nsh_strcat(vtbl, argument, working); *allocation = argument; return argument; } else { /* No.. just return the original string from the command line. */ return cmdline; } } else #ifdef CONFIG_NSH_CMDPARMS /* Check for a backquoted command embedded within the argument string. */ if (*ptr == '`') { FAR char *tmpalloc = NULL; FAR char *result; FAR char *rptr; /* Replace the backquote with a NUL terminator and add the * intervening character to the concatenated string. */ *ptr++ = '\0'; argument = nsh_strcat(vtbl, argument, working); *allocation = argument; /* Find the closing backquote */ rptr = strchr(ptr, '`'); if (!rptr) { nsh_output(vtbl, g_fmtnomatching, "`", "`"); return (FAR char *)g_nullstring; } /* Replace the final backquote with a NUL terminator */ *rptr = '\0'; /* Then execute the command to get the sub-string value. On * error, nsh_cmdparm may return g_nullstring but never NULL. */ result = nsh_cmdparm(vtbl, ptr, &tmpalloc); /* Concatenate the result of the operation with the accumulated * string. On failures to allocation memory, nsh_strcat will * just return value value of argument */ argument = nsh_strcat(vtbl, argument, result); *allocation = argument; working = rptr + 1; /* And free any temporary allocations */ if (tmpalloc) { free(tmpalloc); } } else #endif #ifndef CONFIG_DISABLE_ENVIRON /* Check if we encountered a reference to an environment variable */ if (*ptr == '$') { FAR char *envstr; FAR char *rptr; /* Replace the dollar sign with a NUL terminator and add the * intervening character to the concatenated string. */ *ptr++ = '\0'; argument = nsh_strcat(vtbl, argument, working); *allocation = argument; /* Find the end of the environment variable reference. If the * dollar sign ('$') is followed by a right bracket ('{') then the * variable name is terminated with the left bracket character * ('}'). Otherwise, the variable name goes to the end of the * argument. */ if (*ptr == '{') { /* Skip over the left bracket */ ptr++; /* Find the closing right bracket */ rptr = strchr(ptr, '}'); if (!rptr) { nsh_output(vtbl, g_fmtnomatching, "${", "}"); return (FAR char *)g_nullstring; } /* Replace the right bracket with a NUL terminator and set the * working pointer to the character after the bracket. */ *rptr = '\0'; working = rptr + 1; } else { /* Set working to the NUL terminator at the end of the string */ working = ptr + strlen(ptr); } /* Then get the value of the environment variable. On errors, * nsh_envexpand will return the NULL string. */ envstr = nsh_envexpand(vtbl, ptr); if ((vtbl->np.np_flags & NSH_PFLAG_SILENT) == 0) { nsh_output(vtbl," %s=%s\n", ptr, envstr ? envstr :"(null)"); } /* Concatenate the result of the operation with the accumulated * string. On failures to allocation memory, nsh_strcat will * just return value value of argument */ argument = nsh_strcat(vtbl, argument, envstr); *allocation = argument; } else #endif { /* Not a special character... skip to the next character in the * cmdline. */ working++; } } } #else static FAR char *nsh_argexpand(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline, FAR char **allocation) { FAR char *argument = (FAR char *)g_nullstring; #ifdef CONFIG_NSH_CMDPARMS /* Are we being asked to use the output from another command or program * as an input parameters for this command? */ if (*cmdline == '`') { /* Verify that the final character is also a backquote */ FAR char *rptr = strchr(cmdline + 1, '`'); if (!rptr || rptr[1] != '\0') { nsh_output(vtbl, g_fmtnomatching, "`", "`"); return (FAR char *)g_nullstring; } /* Replace the final backquote with a NUL terminator */ *rptr = '\0'; /* Then execute the command to get the parameter value */ argument = nsh_cmdparm(vtbl, cmdline + 1, allocation); } else #endif #ifndef CONFIG_DISABLE_ENVIRON /* Check for references to environment variables */ if (*cmdline == '$') { argument = nsh_envexpand(vtbl, cmdline + 1); } else #endif { /* The argument to be returned is simply the beginning of the * delimited string. */ argument = cmdline; } return argument; } #endif /**************************************************************************** * Name: nsh_argument ****************************************************************************/ static FAR char *nsh_argument(FAR struct nsh_vtbl_s *vtbl, FAR char **saveptr, FAR NSH_MEMLIST_TYPE *memlist) { FAR char *pbegin = *saveptr; FAR char *pend = NULL; FAR char *allocation = NULL; FAR char *argument = NULL; FAR const char *term; #ifdef CONFIG_NSH_CMDPARMS bool backquote; #endif /* Find the beginning of the next token */ for (; *pbegin && strchr(g_token_separator, *pbegin) != NULL; pbegin++); /* If we are at the end of the string with nothing but delimiters found, * then return NULL, meaning that there are no further arguments on the line. */ if (!*pbegin) { return NULL; } /* Does the token begin with '>' -- redirection of output? */ if (*pbegin == '>') { /* Yes.. does it begin with ">>"? */ if (*(pbegin + 1) == '>') { *saveptr = pbegin + 2; argument = (FAR char *)g_redirect2; } else { *saveptr = pbegin + 1; argument = (FAR char *)g_redirect1; } } /* Does the token begin with '#' -- comment */ else if (*pbegin == '#') { /* Return NULL meaning that we are at the end of the line */ *saveptr = pbegin; argument = NULL; } /* Otherwise, it is a normal argument and we have to parse using the normal * rules to find the end of the argument. */ else { /* However, the rules are a little different if the next argument is * a quoted string. */ if (*pbegin == '"') { /* A quoted string can only be terminated with another quotation * mark. */ pbegin++; term = "\""; } else { /* No, then any of the usual separators will terminate the argument */ term = g_token_separator; } /* Find the end of the string */ #ifdef CONFIG_NSH_CMDPARMS /* Some special care must be exercised to make sure that we do not break up * any backquote delimited substrings. NOTE that the absence of a closing * backquote is not detected; That case should be detected later. */ for (backquote = false, pend = pbegin; *pend; pend++) { /* Toggle the backquote flag when one is encountered? */ if (*pend == '`') { backquote = !backquote; } /* Check for a delimiting character only if we are not in a * backquoted sub-string. */ else if (!backquote && strchr(term, *pend) != NULL) { /* We found a delimiter outside of anybackqouted substring. * Now we can break out of the loop. */ break; } } #else for (pend = pbegin + 1; *pend && strchr(term, *pend) == NULL; pend++); #endif /* pend either points to the end of the string or to the first * delimiter after the string. */ if (*pend) { /* Turn the delimiter into a NUL terminator */ *pend++ = '\0'; } /* Save the pointer where we left off */ *saveptr = pend; /* Perform expansions as necessary for the argument */ argument = nsh_argexpand(vtbl, pbegin, &allocation); } /* If any memory was allocated for this argument, make sure that it is * added to the list of memory to be freed at the end of commend * processing. */ NSH_MEMLIST_ADD(memlist, allocation); /* Return the parsed argument. */ return argument; } /**************************************************************************** * Name: nsh_loop_enabled ****************************************************************************/ #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_LOOPS) static bool nsh_loop_enabled(FAR struct nsh_vtbl_s *vtbl) { FAR struct nsh_parser_s *np = &vtbl->np; /* If we are looping and the disable bit is set, then we are skipping * all data until we next get to the 'done' token at the end of the * loop. */ if (np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_DO) { /* We have parsed 'do', looking for 'done' */ return (bool)np->np_lpstate[np->np_lpndx].lp_enable; } return true; } #else # define nsh_loop_enabled(vtbl) true #endif /**************************************************************************** * Name: nsh_itef_enabled ****************************************************************************/ #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_ITEF) static bool nsh_itef_enabled(FAR struct nsh_vtbl_s *vtbl) { FAR struct nsh_parser_s *np = &vtbl->np; bool ret = !np->np_iestate[np->np_iendx].ie_disabled; if (ret) { switch (np->np_iestate[np->np_iendx].ie_state) { case NSH_ITEF_NORMAL: case NSH_ITEF_IF: default: break; case NSH_ITEF_THEN: ret = !np->np_iestate[np->np_iendx].ie_ifcond; break; case NSH_ITEF_ELSE: ret = np->np_iestate[np->np_iendx].ie_ifcond; break; } } return ret; } #else # define nsh_itef_enabled(vtbl) true #endif /**************************************************************************** * Name: nsh_cmdenabled ****************************************************************************/ #ifndef CONFIG_NSH_DISABLESCRIPT static bool nsh_cmdenabled(FAR struct nsh_vtbl_s *vtbl) { /* Return true if command processing is enabled on this pass through the * loop AND if command processing is enabled in this part of the if-then- * else-fi sequence. */ return (nsh_loop_enabled(vtbl) && nsh_itef_enabled(vtbl)); } #endif /**************************************************************************** * Name: nsh_loop ****************************************************************************/ #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_LOOPS) static int nsh_loop(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr, FAR NSH_MEMLIST_TYPE *memlist) { FAR struct nsh_parser_s *np = &vtbl->np; FAR char *cmd = *ppcmd; long offset; bool whilematch; bool untilmatch; bool enable; int ret; if (cmd) { /* Check if the command is preceded by "while" or "until" */ whilematch = strcmp(cmd, "while") == 0; untilmatch = strcmp(cmd, "until") == 0; if (whilematch || untilmatch) { uint8_t state; /* Get the cmd following the "while" or "until" */ *ppcmd = nsh_argument(vtbl, saveptr, memlist); if (!*ppcmd) { nsh_output(vtbl, g_fmtarginvalid, "if"); goto errout; } /* Verify that "while" or "until" is valid in this context */ if ( #ifndef CONFIG_NSH_DISABLE_ITEF np->np_iestate[np->np_iendx].ie_state == NSH_ITEF_IF || #endif np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_WHILE || np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_UNTIL || np->np_stream == NULL || np->np_foffs < 0) { nsh_output(vtbl, g_fmtcontext, cmd); goto errout; } /* Check if we have exceeded the maximum depth of nesting */ if (np->np_lpndx >= CONFIG_NSH_NESTDEPTH-1) { nsh_output(vtbl, g_fmtdeepnesting, cmd); goto errout; } /* "Push" the old state and set the new state */ state = whilematch == 0 ? NSH_LOOP_WHILE : NSH_LOOP_UNTIL; enable = nsh_cmdenabled(vtbl); #ifdef NSH_DISABLE_SEMICOLON offset = np->np_foffs; #else offset = np->np_foffs + np->np_loffs; #endif #ifndef NSH_DISABLE_SEMICOLON np->np_jump = false; #endif np->np_lpndx++; np->np_lpstate[np->np_lpndx].lp_state = state; np->np_lpstate[np->np_lpndx].lp_enable = enable; #ifndef CONFIG_NSH_DISABLE_ITEF np->np_lpstate[np->np_lpndx].lp_iendx = np->np_iendx; #endif np->np_lpstate[np->np_lpndx].lp_topoffs = offset; } /* Check if the token is "do" */ else if (strcmp(cmd, "do") == 0) { /* Get the cmd following the "do" -- there may or may not be one */ *ppcmd = nsh_argument(vtbl, saveptr, memlist); /* Verify that "do" is valid in this context */ if (np->np_lpstate[np->np_lpndx].lp_state != NSH_LOOP_WHILE && np->np_lpstate[np->np_lpndx].lp_state != NSH_LOOP_UNTIL) { nsh_output(vtbl, g_fmtcontext, "do"); goto errout; } np->np_lpstate[np->np_lpndx].lp_state = NSH_LOOP_DO; } /* Check if the token is "done" */ else if (strcmp(cmd, "done") == 0) { /* Get the cmd following the "done" -- there should be one */ *ppcmd = nsh_argument(vtbl, saveptr, memlist); if (*ppcmd) { nsh_output(vtbl, g_fmtarginvalid, "done"); goto errout; } /* Verify that "done" is valid in this context */ if (np->np_lpstate[np->np_lpndx].lp_state != NSH_LOOP_DO) { nsh_output(vtbl, g_fmtcontext, "done"); goto errout; } if (np->np_lpndx < 1) /* Shouldn't happen */ { nsh_output(vtbl, g_fmtinternalerror, "done"); goto errout; } /* Now what do we do? We either: Do go back to the top of the * loop (if lp_enable == true) or continue past the end of the * loop (if lp_enable == false) */ if (np->np_lpstate[np->np_lpndx].lp_enable) { /* Set the new file position to the top of the loop offset */ ret = fseek(np->np_stream, np->np_lpstate[np->np_lpndx].lp_topoffs, SEEK_SET); if (ret < 0) { nsh_output(vtbl, g_fmtcmdfailed, "done", "fseek", NSH_ERRNO); } #ifndef NSH_DISABLE_SEMICOLON /* Signal nsh_parse that we need to stop processing the * current line and jump back to the top of the loop. */ np->np_jump = true; #endif } else { np->np_lpstate[np->np_lpndx].lp_enable = true; } /* "Pop" the previous state. We do this no matter what we * decided to do */ np->np_lpstate[np->np_lpndx].lp_state = NSH_LOOP_NORMAL; np->np_lpndx--; } /* If we just parsed "while" or "until", then nothing is acceptable * other than "do" */ else if (np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_WHILE || np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_UNTIL) { nsh_output(vtbl, g_fmtcontext, cmd); goto errout; } } return OK; errout: #ifndef NSH_DISABLE_SEMICOLON np->np_jump = false; #endif np->np_lpndx = 0; np->np_lpstate[0].lp_state = NSH_LOOP_NORMAL; np->np_lpstate[0].lp_enable = true; np->np_lpstate[0].lp_topoffs = 0; return ERROR; } #endif /**************************************************************************** * Name: nsh_itef ****************************************************************************/ #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_ITEF) static int nsh_itef(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr, FAR NSH_MEMLIST_TYPE *memlist) { FAR struct nsh_parser_s *np = &vtbl->np; FAR char *cmd = *ppcmd; bool disabled; if (cmd) { /* Check if the command is preceded by "if" */ if (strcmp(cmd, "if") == 0) { /* Get the cmd following the if */ *ppcmd = nsh_argument(vtbl, saveptr, memlist); if (!*ppcmd) { nsh_output(vtbl, g_fmtarginvalid, "if"); goto errout; } /* Verify that "if" is valid in this context */ if (np->np_iestate[np->np_iendx].ie_state == NSH_ITEF_IF) { nsh_output(vtbl, g_fmtcontext, "if"); goto errout; } /* Check if we have exceeded the maximum depth of nesting */ if (np->np_iendx >= CONFIG_NSH_NESTDEPTH-1) { nsh_output(vtbl, g_fmtdeepnesting, "if"); goto errout; } /* "Push" the old state and set the new state */ disabled = !nsh_cmdenabled(vtbl); np->np_iendx++; np->np_iestate[np->np_iendx].ie_state = NSH_ITEF_IF; np->np_iestate[np->np_iendx].ie_disabled = disabled; np->np_iestate[np->np_iendx].ie_ifcond = false; } /* Check if the token is "then" */ else if (strcmp(cmd, "then") == 0) { /* Get the cmd following the "then" -- there may or may not be one */ *ppcmd = nsh_argument(vtbl, saveptr, memlist); /* Verify that "then" is valid in this context */ if (np->np_iestate[np->np_iendx].ie_state != NSH_ITEF_IF) { nsh_output(vtbl, g_fmtcontext, "then"); goto errout; } np->np_iestate[np->np_iendx].ie_state = NSH_ITEF_THEN; } /* Check if the token is "else" */ else if (strcmp(cmd, "else") == 0) { /* Get the cmd following the "else" -- there may or may not be one */ *ppcmd = nsh_argument(vtbl, saveptr, memlist); /* Verify that "else" is valid in this context */ if (np->np_iestate[np->np_iendx].ie_state != NSH_ITEF_THEN) { nsh_output(vtbl, g_fmtcontext, "else"); goto errout; } np->np_iestate[np->np_iendx].ie_state = NSH_ITEF_ELSE; } /* Check if the token is "fi" */ else if (strcmp(cmd, "fi") == 0) { /* Get the cmd following the fi -- there should be one */ *ppcmd = nsh_argument(vtbl, saveptr, memlist); if (*ppcmd) { nsh_output(vtbl, g_fmtarginvalid, "fi"); goto errout; } /* Verify that "fi" is valid in this context */ if (np->np_iestate[np->np_iendx].ie_state != NSH_ITEF_THEN && np->np_iestate[np->np_iendx].ie_state != NSH_ITEF_ELSE) { nsh_output(vtbl, g_fmtcontext, "fi"); goto errout; } if (np->np_iendx < 1) /* Shouldn't happen */ { nsh_output(vtbl, g_fmtinternalerror, "if"); goto errout; } /* "Pop" the previous state */ np->np_iendx--; } /* If we just parsed "if", then nothing is acceptable other than "then" */ else if (np->np_iestate[np->np_iendx].ie_state == NSH_ITEF_IF) { nsh_output(vtbl, g_fmtcontext, cmd); goto errout; } } return OK; errout: np->np_iendx = 0; np->np_iestate[0].ie_state = NSH_ITEF_NORMAL; np->np_iestate[0].ie_disabled = false; np->np_iestate[0].ie_ifcond = false; return ERROR; } #endif /**************************************************************************** * Name: nsh_nice ****************************************************************************/ #ifndef CONFIG_NSH_DISABLEBG static int nsh_nice(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr, FAR NSH_MEMLIST_TYPE *memlist) { FAR char *cmd = *ppcmd; vtbl->np.np_nice = 0; if (cmd) { /* Check if the command is preceded by "nice" */ if (strcmp(cmd, "nice") == 0) { /* Nicenesses range from -20 (most favorable scheduling) to 19 * (least favorable). Default is 10. */ vtbl->np.np_nice = 10; /* Get the cmd (or -d option of nice command) */ cmd = nsh_argument(vtbl, saveptr, memlist); if (cmd && strcmp(cmd, "-d") == 0) { FAR char *val = nsh_argument(vtbl, saveptr, memlist); if (val) { char *endptr; vtbl->np.np_nice = (int)strtol(val, &endptr, 0); if (vtbl->np.np_nice > 19 || vtbl->np.np_nice < -20 || endptr == val || *endptr != '\0') { nsh_output(vtbl, g_fmtarginvalid, "nice"); return ERROR; } cmd = nsh_argument(vtbl, saveptr, memlist); } } /* Return the real command name */ *ppcmd = cmd; } } return OK; } #endif /**************************************************************************** * Name: nsh_parse_cmdparm * * Description: * This function parses and executes a simple NSH command. Output is * always redirected. This function supports command parameters like * * set FOO `hello` * * which would set the environment variable FOO to the output from * the hello program * ****************************************************************************/ #ifdef CONFIG_NSH_CMDPARMS static int nsh_parse_cmdparm(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline, FAR const char *redirfile) { NSH_MEMLIST_TYPE memlist; FAR char *argv[MAX_ARGV_ENTRIES]; FAR char *saveptr; FAR char *cmd; #ifndef CONFIG_NSH_DISABLEBG bool bgsave; #endif bool redirsave; int argc; int ret; /* Initialize parser state */ memset(argv, 0, MAX_ARGV_ENTRIES*sizeof(FAR char *)); NSH_MEMLIST_INIT(memlist); /* If any options like nice, redirection, or backgrounding are attempted, * these will not be recognized and will just be passed through as * normal, invalid commands or parameters. */ #ifndef CONFIG_NSH_DISABLEBG /* The command is never backgrounded . Remember the current backgrounding * state */ bgsave = vtbl->np.np_bg; vtbl->np.np_bg = false; #endif /* Output is always redirected. Remember the current redirection state */ redirsave = vtbl->np.np_redirect; vtbl->np.np_redirect = true; /* Parse out the command at the beginning of the line */ saveptr = cmdline; cmd = nsh_argument(vtbl, &saveptr, &memlist); /* Check if any command was provided -OR- if command processing is * currently disabled. */ #ifndef CONFIG_NSH_DISABLESCRIPT if (!cmd || !nsh_cmdenabled(vtbl)) #else if (!cmd) #endif { /* An empty line is not an error and an unprocessed command cannot * generate an error, but neither should it change the last command * status. */ NSH_MEMLIST_FREE(&memlist); return OK; } /* Parse all of the arguments following the command name. The form * of argv is: * * argv[0]: The command name. * argv[1]: The beginning of argument (up to CONFIG_NSH_MAXARGUMENTS) * argv[argc]: NULL terminating pointer * * Maximum size is CONFIG_NSH_MAXARGUMENTS+1 */ argv[0] = cmd; for (argc = 1; argc < MAX_ARGV_ENTRIES-1; argc++) { argv[argc] = nsh_argument(vtbl, &saveptr, &memlist); if (!argv[argc]) { break; } } argv[argc] = NULL; /* Check if the maximum number of arguments was exceeded */ if (argc > CONFIG_NSH_MAXARGUMENTS) { nsh_output(vtbl, g_fmttoomanyargs, cmd); } /* Then execute the command */ ret = nsh_execute(vtbl, argc, argv, redirfile, O_WRONLY|O_CREAT|O_TRUNC); /* Restore the backgrounding and redirection state */ #ifndef CONFIG_NSH_DISABLEBG vtbl->np.np_bg = bgsave; #endif vtbl->np.np_redirect = redirsave; NSH_MEMLIST_FREE(&memlist); return ret; } #endif /**************************************************************************** * Name: nsh_parse_command * * Description: * This function parses and executes one NSH command from the command line. * ****************************************************************************/ static int nsh_parse_command(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline) { NSH_MEMLIST_TYPE memlist; FAR char *argv[MAX_ARGV_ENTRIES]; FAR char *saveptr; FAR char *cmd; FAR char *redirfile = NULL; int oflags = 0; int argc; int ret; /* Initialize parser state */ memset(argv, 0, MAX_ARGV_ENTRIES*sizeof(FAR char *)); NSH_MEMLIST_INIT(memlist); #ifndef CONFIG_NSH_DISABLEBG vtbl->np.np_bg = false; #endif #if CONFIG_NFILE_STREAMS > 0 vtbl->np.np_redirect = false; #endif /* Parse out the command at the beginning of the line */ saveptr = cmdline; cmd = nsh_argument(vtbl, &saveptr, &memlist); #ifndef CONFIG_NSH_DISABLESCRIPT #ifndef CONFIG_NSH_DISABLE_LOOPS /* Handle while-do-done and until-do-done loops */ if (nsh_loop(vtbl, &cmd, &saveptr, &memlist) != 0) { NSH_MEMLIST_FREE(&memlist); return nsh_saveresult(vtbl, true); } #endif #ifndef CONFIG_NSH_DISABLE_ITEF /* Handle if-then-else-fi */ if (nsh_itef(vtbl, &cmd, &saveptr, &memlist) != 0) { NSH_MEMLIST_FREE(&memlist); return nsh_saveresult(vtbl, true); } #endif #endif /* Handle nice */ #ifndef CONFIG_NSH_DISABLEBG if (nsh_nice(vtbl, &cmd, &saveptr, &memlist) != 0) { NSH_MEMLIST_FREE(&memlist); return nsh_saveresult(vtbl, true); } #endif /* Check if any command was provided -OR- if command processing is * currently disabled. */ #ifndef CONFIG_NSH_DISABLESCRIPT if (!cmd || !nsh_cmdenabled(vtbl)) #else if (!cmd) #endif { /* An empty line is not an error and an unprocessed command cannot * generate an error, but neither should it change the last command * status. */ NSH_MEMLIST_FREE(&memlist); return OK; } /* Parse all of the arguments following the command name. The form * of argv is: * * argv[0]: The command name. * argv[1]: The beginning of argument (up to CONFIG_NSH_MAXARGUMENTS) * argv[argc-3]: Possibly '>' or '>>' * argv[argc-2]: Possibly * argv[argc-1]: Possibly '&' * argv[argc]: NULL terminating pointer * * Maximum size is CONFIG_NSH_MAXARGUMENTS+5 */ argv[0] = cmd; for (argc = 1; argc < MAX_ARGV_ENTRIES-1; argc++) { argv[argc] = nsh_argument(vtbl, &saveptr, &memlist); if (!argv[argc]) { break; } } argv[argc] = NULL; /* Check if the command should run in background */ #ifndef CONFIG_NSH_DISABLEBG if (argc > 1 && strcmp(argv[argc-1], "&") == 0) { vtbl->np.np_bg = true; argv[argc-1] = NULL; argc--; } #endif #if CONFIG_NFILE_STREAMS > 0 /* Check if the output was re-directed using > or >> */ if (argc > 2) { /* Check for redirection to a new file */ if (strcmp(argv[argc-2], g_redirect1) == 0) { vtbl->np.np_redirect = true; oflags = O_WRONLY|O_CREAT|O_TRUNC; redirfile = nsh_getfullpath(vtbl, argv[argc-1]); argc -= 2; } /* Check for redirection by appending to an existing file */ else if (strcmp(argv[argc-2], g_redirect2) == 0) { vtbl->np.np_redirect = true; oflags = O_WRONLY|O_CREAT|O_APPEND; redirfile = nsh_getfullpath(vtbl, argv[argc-1]); argc -= 2; } } #endif /* Check if the maximum number of arguments was exceeded */ if (argc > CONFIG_NSH_MAXARGUMENTS) { nsh_output(vtbl, g_fmttoomanyargs, cmd); } /* Then execute the command */ ret = nsh_execute(vtbl, argc, argv, redirfile, oflags); /* Free any allocated resources */ #if CONFIG_NFILE_STREAMS > 0 /* Free the redirected output file path */ if (redirfile) { nsh_freefullpath(redirfile); } #endif NSH_MEMLIST_FREE(&memlist); return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nsh_parse * * Description: * This function parses and executes the line of text received from the * user. This may consist of one or more NSH commands. Multiple NSH * commands are separated by semi-colons. * ****************************************************************************/ int nsh_parse(FAR struct nsh_vtbl_s *vtbl, FAR char *cmdline) { #ifdef NSH_DISABLE_SEMICOLON return nsh_parse_command(vtbl, cmdline); #else #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_LOOPS) FAR struct nsh_parser_s *np = &vtbl->np; #endif FAR char *start = cmdline; FAR char *working = cmdline; FAR char *ptr; size_t len; int ret; /* Loop until all of the commands on the command line have been processed OR * until the end-of-loop has been recountered and we need to reload the line * at the top of the loop. */ #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_LOOPS) for (np->np_jump = false; !np->np_jump; ) #else for (;;) #endif { #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_LOOPS) /* Save the offset on the line to the start of the command */ np->np_loffs = (uint16_t)(working - cmdline); #endif /* A command may be terminated with a newline character, the end of the * line, a semicolon, or a '#' character. NOTE that the set of * delimiting characters includes the quotation mark. We need to * handle quotation marks here because any other delimiter within a * quoted string must be treated as normal text. */ len = strcspn(working, g_line_separator); ptr = working + len; /* Check for the last command on the line. This means that the none * of the delimiting characters was found or that the newline or '#' * character was found. Anything after the newline or '#' character * is ignored (there should not be anything after a newline, of * course). */ if (*ptr == '\0' || *ptr == '\n' || *ptr == '#') { /* Parse the last command on the line */ return nsh_parse_command(vtbl, start); } /* Check for a command terminated with ';'. There is probably another * command on the command line after this one. */ else if (*ptr == ';') { /* Terminate the line */ *ptr++ = '\0'; /* Parse this command */ ret = nsh_parse_command(vtbl, start); if (ret != OK) { /* nsh_parse_command may return (1) -1 (ERROR) meaning that the * command failed or we failed to start the command application * or (2) 1 meaning that the application task was spawned * successfully but returned failure exit status. */ return ret; } /* Then set the start of the next command on the command line */ start = ptr; working = ptr; } /* Check if we encountered a quoted string */ else /* if (*ptr == '"') */ { /* Find the closing quotation mark */ FAR char *tmp = strchr(ptr + 1, '"'); if (!tmp) { /* No closing quotation mark! */ nsh_output(vtbl, g_fmtnomatching, "\"", "\""); return ERROR; } /* Otherwise, continue parsing after the closing quotation mark */ working = ++tmp; } } #ifndef CONFIG_NSH_DISABLESCRIPT return OK; #endif #endif } /**************************************************************************** * Name: cmd_break ****************************************************************************/ #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_LOOPS) int cmd_break(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv) { FAR struct nsh_parser_s *np = &vtbl->np; /* Break outside of a loop is ignored */ if (np->np_lpstate[np->np_lpndx].lp_state == NSH_LOOP_DO) { #ifndef CONFIG_NSH_DISABLE_ITEF /* Yes... pop the original if-then-else-if state */ np->np_iendx = np->np_lpstate[np->np_lpndx].lp_iendx; #endif /* Disable all command processing until 'done' is encountered. */ np->np_lpstate[np->np_lpndx].lp_enable = false; } /* No syntax errors are detected(?). Break is a nop everywhere except * the supported context. */ return OK; } #endif