/**************************************************************************** * apps/examples/posix_spawn/spawn_main.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Check configuration. This is not all of the configuration settings that * are required -- only the more obvious. */ #ifdef CONFIG_BINFMT_DISABLE # error "The binary loader is disabled (CONFIG_BINFMT_DISABLE)!" #endif #ifndef CONFIG_ELF # error "You must select CONFIG_ELF in your configuration file" #endif #ifndef CONFIG_FS_ROMFS # error "You must select CONFIG_FS_ROMFS in your configuration file" #endif #ifdef CONFIG_DISABLE_MOUNTPOINT # error "You must not disable mountpoints via CONFIG_DISABLE_MOUNTPOINT in your configuration file" #endif #ifdef CONFIG_BINFMT_DISABLE # error "You must not disable loadable modules via CONFIG_BINFMT_DISABLE in your configuration file" #endif #ifndef CONFIG_BOARDCTL # error "This configuration requires CONFIG_BOARDCTL" #endif #ifndef CONFIG_BOARDCTL_APP_SYMTAB # error "You must enable the symobol table interface with CONFIG_BOARDCTL_APP_SYMTAB" #endif /* Describe the ROMFS file system */ #define SECTORSIZE 512 #define NSECTORS(b) (((b)+SECTORSIZE-1)/SECTORSIZE) #define MOUNTPT "/mnt/romfs" #ifndef CONFIG_EXAMPLES_POSIXSPAWN_DEVMINOR # define CONFIG_EXAMPLES_POSIXSPAWN_DEVMINOR 0 #endif #ifndef CONFIG_EXAMPLES_POSIXSPAWN_DEVPATH # define CONFIG_EXAMPLES_POSIXSPAWN_DEVPATH "/dev/ram0" #endif /* If CONFIG_DEBUG_FEATURES is enabled, use info/err instead of printf so * that the output will be synchronous with the debug output. */ #ifdef CONFIG_DEBUG_FEATURES # define message _info # define errmsg _err #else # define message printf # define errmsg printf #endif /**************************************************************************** * Private Types ****************************************************************************/ /**************************************************************************** * Private Data ****************************************************************************/ static unsigned int g_mminitial; /* Initial memory usage */ static unsigned int g_mmstep; /* Memory Usage at beginning of test step */ static const char delimiter[] = "**************************************" "**************************************"; static const char g_data[] = "testdata.txt"; static char fullpath[128]; static char * const g_hello_argv[5] = { "hello", "Argument 1", "Argument 2", "Argument 3", NULL }; static char * const g_redirect_argv[2] = { "redirect", NULL }; /**************************************************************************** * Symbols from Auto-Generated Code ****************************************************************************/ extern const unsigned char romfs_img[]; extern const unsigned int romfs_img_len; extern const struct symtab_s g_spawn_exports[]; extern const int g_spawn_nexports; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: mm_update ****************************************************************************/ static void mm_update(FAR unsigned int *previous, FAR const char *msg) { struct mallinfo mmcurrent; /* Get the current memory usage */ mmcurrent = mallinfo(); /* Show the change from the previous time */ printf("\nMemory Usage %s:\n", msg); printf(" Before: %8u After: %8u Change: %8d\n", *previous, mmcurrent.uordblks, (int)mmcurrent.uordblks - (int)*previous); /* Set up for the next test */ *previous = mmcurrent.uordblks; } /**************************************************************************** * Name: mm_initmonitor ****************************************************************************/ static void mm_initmonitor(void) { struct mallinfo mmcurrent; mmcurrent = mallinfo(); g_mminitial = mmcurrent.uordblks; g_mmstep = mmcurrent.uordblks; printf("Initial memory usage: %d\n", mmcurrent.uordblks); } /**************************************************************************** * Name: testheader ****************************************************************************/ static inline void testheader(FAR const char *progname) { message("\n%s\n* Executing %s\n%s\n\n", delimiter, progname, delimiter); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: spawn_main ****************************************************************************/ int main(int argc, FAR char *argv[]) { struct boardioc_symtab_s symdesc; posix_spawn_file_actions_t file_actions; posix_spawnattr_t attr; FAR const char *filepath; pid_t pid; int ret; struct boardioc_romdisk_s desc; /* Initialize the memory monitor */ mm_initmonitor(); /* Create a ROM disk for the ROMFS filesystem */ desc.minor = CONFIG_EXAMPLES_POSIXSPAWN_DEVMINOR; /* Minor device number of the ROM disk. */ desc.nsectors = NSECTORS(romfs_img_len); /* The number of sectors in the ROM disk */ desc.sectsize = SECTORSIZE; /* The size of one sector in bytes */ desc.image = (FAR uint8_t *)romfs_img; /* File system image */ message("Registering romdisk at /dev/ram%d\n", CONFIG_EXAMPLES_POSIXSPAWN_DEVMINOR); ret = boardctl(BOARDIOC_ROMDISK, (uintptr_t)&desc); if (ret < 0) { errmsg("ERROR: romdisk_register failed: %s\n", strerror(errno)); exit(1); } mm_update(&g_mmstep, "after romdisk_register"); /* Mount the file system */ message("Mounting ROMFS filesystem at target=%s with source=%s\n", MOUNTPT, CONFIG_EXAMPLES_POSIXSPAWN_DEVPATH); ret = mount(CONFIG_EXAMPLES_POSIXSPAWN_DEVPATH, MOUNTPT, "romfs", MS_RDONLY, NULL); if (ret < 0) { errmsg("ERROR: mount(%s,%s,romfs) failed: %s\n", CONFIG_EXAMPLES_POSIXSPAWN_DEVPATH, MOUNTPT, strerror(errno)); } mm_update(&g_mmstep, "after mount"); /* Does the system support the PATH variable? Has the PATH variable * already been set? If YES and NO, then set the PATH variable to * the ROMFS mountpoint. */ #if defined(CONFIG_LIBC_ENVPATH) && !defined(CONFIG_PATH_INITIAL) setenv("PATH", MOUNTPT, 1); #endif /* Make sure that we are using our symbol tablee */ symdesc.symtab = (FAR struct symtab_s *)g_spawn_exports; /* Discard 'const' */ symdesc.nsymbols = g_spawn_nexports; boardctl(BOARDIOC_APP_SYMTAB, (uintptr_t)&symdesc); /************************************************************************** * Case 1: Simple program with arguments **************************************************************************/ /* Output a separator so that we can clearly discriminate the output of * this program from the others. */ testheader(g_hello_argv[0]); /* Initialize the attributes file actions structure */ ret = posix_spawn_file_actions_init(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_init failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_init(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_init failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr init"); /* If the binary loader does not support the PATH variable, then * create the full path to the executable program. Otherwise, * use the relative path so that the binary loader will have to * search the PATH variable to find the executable. */ #ifdef CONFIG_LIBC_ENVPATH filepath = g_hello_argv[0]; #else snprintf(fullpath, 128, "%s/%s", MOUNTPT, g_hello_argv[0]); filepath = fullpath; #endif /* Execute the program */ mm_update(&g_mmstep, "before posix_spawn"); ret = posix_spawn(&pid, filepath, &file_actions, &attr, g_hello_argv, NULL); if (ret != 0) { errmsg("ERROR: posix_spawn failed: %d\n", ret); } sleep(4); mm_update(&g_mmstep, "after posix_spawn"); /* Free attributes and file actions */ ret = posix_spawn_file_actions_destroy(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_destroy failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_destroy(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_destroy failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr destruction"); /************************************************************************** * Case 2: Simple program with redirection of stdin to a file input **************************************************************************/ /* Output a separator so that we can clearly discriminate the output of * this program from the others. */ testheader(g_redirect_argv[0]); /* Initialize the attributes file actions structure */ ret = posix_spawn_file_actions_init(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_init failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_init(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_init failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr init"); /* Set up to close stdin (0) and open testdata.txt as the program input */ ret = posix_spawn_file_actions_addclose(&file_actions, 0); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_addclose failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); snprintf(fullpath, 128, "%s/%s", MOUNTPT, g_data); ret = posix_spawn_file_actions_addopen(&file_actions, 0, fullpath, O_RDONLY, 0644); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_addopen failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); mm_update(&g_mmstep, "after adding file_actions"); /* If the binary loader does not support the PATH variable, then * create the full path to the executable program. Otherwise, * use the relative path so that the binary loader will have to * search the PATH variable to find the executable. */ #ifdef CONFIG_LIBC_ENVPATH filepath = g_redirect_argv[0]; #else snprintf(fullpath, 128, "%s/%s", MOUNTPT, g_redirect_argv[0]); filepath = fullpath; #endif /* Execute the program */ mm_update(&g_mmstep, "before posix_spawn"); ret = posix_spawn(&pid, filepath, &file_actions, &attr, g_redirect_argv, NULL); if (ret != 0) { errmsg("ERROR: posix_spawn failed: %d\n", ret); } sleep(2); mm_update(&g_mmstep, "after posix_spawn"); /* Free attributes and file actions */ ret = posix_spawn_file_actions_destroy(&file_actions); if (ret != 0) { errmsg("ERROR: posix_spawn_file_actions_destroy failed: %d\n", ret); } posix_spawn_file_actions_dump(&file_actions); ret = posix_spawnattr_destroy(&attr); if (ret != 0) { errmsg("ERROR: posix_spawnattr_destroy failed: %d\n", ret); } posix_spawnattr_dump(&attr); mm_update(&g_mmstep, "after file_action/attr destruction"); /* Clean-up */ mm_update(&g_mmstep, "End-of-Test"); return 0; }