/**************************************************************************** * apps/system/nxrecorder/nxrecorder.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "system/nxrecorder.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define NXRECORDER_STATE_IDLE 0 #define NXRECORDER_STATE_RECORDING 1 #define NXRECORDER_STATE_PAUSED 2 #ifndef CONFIG_NXRECORDER_MSG_PRIO # define CONFIG_NXRECORDER_MSG_PRIO 1 #endif #ifndef CONFIG_NXRECORDER_RECORDTHREAD_STACKSIZE # define CONFIG_NXRECORDER_RECORDTHREAD_STACKSIZE 1500 #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nxrecorder_opendevice * * nxrecorder_opendevice() either searches the Audio system for a device * that is compatible with the specified audio format and opens it, or * tries to open the device if specified and validates that it supports * the requested format. * * Return: * OK if compatible device opened * -ENODEV if no compatible device opened. * -ENOENT if device couldn't be opened. * ****************************************************************************/ static int nxrecorder_opendevice(FAR struct nxrecorder_s *precorder) { /* If we have a device, then open it */ if (precorder->device[0] != '\0') { /* Use the saved prefformat to test if the requested * format is specified by the device */ /* Device supports the format. Open the device file. */ precorder->dev_fd = open(precorder->device, O_RDWR | O_CLOEXEC); if (precorder->dev_fd == -1) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: Failed to open %s: %d\n", precorder->device, -errcode); UNUSED(errcode); return -ENOENT; } return OK; } /* Device not found */ auderr("ERROR: Device not found\n"); precorder->dev_fd = -1; return -ENODEV; } /**************************************************************************** * Name: nxrecorder_writebuffer * * Write the next block of data to the pcm raw data file into the specified * buffer. * ****************************************************************************/ static int nxrecorder_writebuffer(FAR struct nxrecorder_s *precorder, FAR struct ap_buffer_s *apb) { int ret; /* Validate the file is still open. It will be closed automatically when * we encounter the end of file (or, perhaps, a write error that we cannot * handle. */ if (precorder->fd == -1) { /* Return -ENODATA to indicate that there is nothing more to write to * the file. */ return -ENODATA; } /* Write data to the file. */ ret = write(precorder->fd, apb->samp, apb->nbytes); if (ret < 0) { return ret; } apb->curbyte = 0; apb->flags = 0; /* Return OK to indicate that the buffer should be passed through to the * audio device. This does not necessarily indicate that data was written * correctly. */ return OK; } /**************************************************************************** * Name: nxrecorder_enqueuebuffer * * Description: * Enqueue the audio buffer in the downstream device. Normally we are * called with a buffer of data to be enqueued in the audio stream. * * Be we may also receive an empty length buffer (with only the * AUDIO_APB_FINAL set) in the event of certain write error occurs or in * the event that the file was an exact multiple of the nmaxbytes size of * the audio buffer. * In that latter case, we have an end of file with no bytes written. * * These infrequent zero length buffers have to be passed through because * the include the AUDIO_APB_FINAL flag that is needed to terminate the * audio stream. * ****************************************************************************/ static int nxrecorder_enqueuebuffer(FAR struct nxrecorder_s *precorder, FAR struct ap_buffer_s *apb) { struct audio_buf_desc_s bufdesc; int ret; /* Now enqueue the buffer with the audio device. If the number of * bytes in the file happens to be an exact multiple of the audio * buffer size, then we will receive the last buffer size = 0. We * encode this buffer also so the audio system knows its the end of * the file and can do proper clean-up. */ apb->nbytes = apb->nmaxbytes; #ifdef CONFIG_AUDIO_MULTI_SESSION bufdesc.session = precorder->session; #endif bufdesc.numbytes = apb->nbytes; bufdesc.u.buffer = apb; ret = ioctl(precorder->dev_fd, AUDIOIOC_ENQUEUEBUFFER, (unsigned long)&bufdesc); if (ret < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: AUDIOIOC_ENQUEUEBUFFER ioctl failed: %d\n", errcode); return -errcode; } /* Return OK to indicate that we successfully write data to the file * (and we are not yet at the end of file) */ return OK; } /**************************************************************************** * Name: nxrecorder_thread_recordthread * * This is the thread that write the audio file file and enqueues / * dequeues buffers from the selected and opened audio device. * ****************************************************************************/ static void *nxrecorder_recordthread(pthread_addr_t pvarg) { struct nxrecorder_s *precorder = (struct nxrecorder_s *) pvarg; struct audio_msg_s msg; struct audio_buf_desc_s buf_desc; ssize_t size; bool running = true; bool streaming = true; bool failed = false; struct ap_buffer_info_s buf_info; FAR struct ap_buffer_s **pbuffers; unsigned int prio; #ifdef CONFIG_DEBUG_FEATURES int outstanding = 0; #endif int x; int ret; audinfo("Entry\n"); /* Query the audio device for its preferred buffer size / qty */ if ((ret = ioctl(precorder->dev_fd, AUDIOIOC_GETBUFFERINFO, (unsigned long) &buf_info)) != OK) { /* Driver doesn't report its buffer size. Use our default. */ buf_info.buffer_size = CONFIG_AUDIO_BUFFER_NUMBYTES; buf_info.nbuffers = CONFIG_AUDIO_NUM_BUFFERS; } /* Create array of pointers to buffers */ pbuffers = (FAR struct ap_buffer_s **) malloc(buf_info.nbuffers * sizeof(FAR void *)); if (pbuffers == NULL) { /* Error allocating memory for buffer storage! */ ret = -ENOMEM; running = false; goto err_out; } /* Create our audio pipeline buffers to use for queueing up data */ for (x = 0; x < buf_info.nbuffers; x++) { pbuffers[x] = NULL; } for (x = 0; x < buf_info.nbuffers; x++) { /* Fill in the buffer descriptor struct to issue an alloc request */ #ifdef CONFIG_AUDIO_MULTI_SESSION buf_desc.session = precorder->session; #endif buf_desc.numbytes = buf_info.buffer_size; buf_desc.u.pbuffer = &pbuffers[x]; ret = ioctl(precorder->dev_fd, AUDIOIOC_ALLOCBUFFER, (unsigned long) &buf_desc); if (ret != sizeof(buf_desc)) { /* Buffer alloc Operation not supported or error allocating! */ auderr("ERROR: Could not allocate buffer %d\n", x); running = false; goto err_out; } } /* Fill up the pipeline with enqueued buffers */ for (x = 0; x < buf_info.nbuffers; x++) { /* Write the next buffer of data */ ret = nxrecorder_enqueuebuffer(precorder, pbuffers[x]); if (ret != OK) { /* Failed to enqueue the buffer. The driver is not happy with * the buffer. Perhaps a encoder has detected something that it * does not like in the stream and has stopped streaming. This * would happen normally if we send a file in the incorrect format * to an audio encoder. * * We must stop streaming as gracefully as possible. Close the * file so that no further data is written. */ close(precorder->fd); precorder->fd = -1; /* We are no longer streaming data to the file. Be we will * need to wait for any outstanding buffers to be recovered. We * also still expect the audio driver to send a AUDIO_MSG_COMPLETE * message after all queued buffers have been returned. */ streaming = false; failed = true; break; } #ifdef CONFIG_DEBUG_FEATURES else { /* The audio driver has one more buffer */ outstanding++; } #endif } audinfo("%d buffers queued, running=%d streaming=%d\n", x, running, streaming); /* Start the audio device */ if (running && !failed) { #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(precorder->dev_fd, AUDIOIOC_START, (unsigned long) precorder->session); #else ret = ioctl(precorder->dev_fd, AUDIOIOC_START, 0); #endif if (ret < 0) { /* Error starting the audio stream! We need to continue running * in order to recover the audio buffers that have already been * queued. */ failed = true; } } if (running && !failed) { /* Indicate we are recording a file */ precorder->state = NXRECORDER_STATE_RECORDING; } /* Loop until we specifically break. running == true means that we are * still looping waiting for the recordback to complete. All of the file * data may have been sent (if streaming == false), but the recordback is * not complete until we get the AUDIO_MSG_COMPLETE (or AUDIO_MSG_STOP) * message * * The normal protocol for streaming errors detected by the audio driver * is as follows: * * (1) The audio driver will indicated the error by returning a negated * error value when the next buffer is enqueued. The upper level * then knows that this buffer was not queue. * (2) The audio driver must return all queued buffers using the * AUDIO_MSG_DEQUEUE message, and * (3) Terminate recording by sending the AUDIO_MSG_COMPLETE message. */ audinfo("%s\n", running ? "Recording..." : "Not running"); while (running) { /* Wait for a signal either from the Audio driver that it needs * additional buffer data, or from a user-space signal to pause, * stop, etc. */ size = mq_receive(precorder->mq, (FAR char *)&msg, sizeof(msg), &prio); /* Validate a message was received */ if (size != sizeof(msg)) { /* Interrupted by a signal? What to do? */ continue; } /* Perform operation based on message id */ switch (msg.msg_id) { /* An audio buffer is being dequeued by the driver */ case AUDIO_MSG_DEQUEUE: #ifdef CONFIG_DEBUG_FEATURES /* Make sure that we believe that the audio driver has at * least one buffer. */ DEBUGASSERT(msg.u.ptr && outstanding > 0); outstanding--; #endif /* Write data to the file directly into this buffer and * re-enqueue it. streaming == true means that we have * not yet hit the end-of-file. */ if (streaming) { /* Write the next buffer of data */ ret = nxrecorder_writebuffer(precorder, msg.u.ptr); if (ret != OK) { /* Out of data. Stay in the loop until the device sends * us a COMPLETE message, but stop trying to record more * data. */ streaming = false; } /* Enqueue buffer by sending it to the audio driver */ else { ret = nxrecorder_enqueuebuffer(precorder, msg.u.ptr); if (ret != OK) { /* There is some issue from the audio driver. * Perhaps a problem in the file format? * * We must stop streaming as gracefully as possible. * Close the file so that no further data is written. */ close(precorder->fd); precorder->fd = -1; /* Stop streaming and wait for buffers to be * returned and to receive the AUDIO_MSG_COMPLETE * indication. */ streaming = false; failed = true; } #ifdef CONFIG_DEBUG_FEATURES else { /* The audio driver has one more buffer */ outstanding++; } #endif } } break; /* Someone wants to stop the recordback. */ case AUDIO_MSG_STOP: /* Send a stop message to the device */ #ifdef CONFIG_DEBUG_FEATURES audinfo("Stopping! outstanding=%d\n", outstanding); #endif #ifdef CONFIG_AUDIO_MULTI_SESSION ioctl(precorder->dev_fd, AUDIOIOC_STOP, (unsigned long) precorder->session); #else ioctl(precorder->dev_fd, AUDIOIOC_STOP, 0); #endif /* Stay in the running loop (without sending more data). * we will need to recover our audio buffers. We will * loop until AUDIO_MSG_COMPLETE is received. */ streaming = false; break; /* Message indicating the recordback is complete */ case AUDIO_MSG_COMPLETE: #ifdef CONFIG_DEBUG_FEATURES audinfo("Record complete. outstanding=%d\n", outstanding); #endif running = false; break; /* Unknown / unsupported message ID */ default: break; } } /* Release our audio buffers and unregister / release the device */ err_out: audinfo("Clean-up and exit\n"); if (pbuffers != NULL) { audinfo("Freeing buffers\n"); for (x = 0; x < buf_info.nbuffers; x++) { /* Fill in the buffer descriptor struct to issue a free request */ if (pbuffers[x] != NULL) { #ifdef CONFIG_AUDIO_MULTI_SESSION buf_desc.session = precorder->session; #endif buf_desc.u.buffer = pbuffers[x]; ioctl(precorder->dev_fd, AUDIOIOC_FREEBUFFER, (unsigned long) &buf_desc); } } /* Free the pointers to the buffers */ free(pbuffers); } /* Unregister the message queue and release the session */ ioctl(precorder->dev_fd, AUDIOIOC_UNREGISTERMQ, (unsigned long) precorder->mq); #ifdef CONFIG_AUDIO_MULTI_SESSION ioctl(precorder->dev_fd, AUDIOIOC_RELEASE, (unsigned long) precorder->session); #else ioctl(precorder->dev_fd, AUDIOIOC_RELEASE, 0); #endif /* Cleanup */ while (sem_wait(&precorder->sem) < 0) { } /* Close the files */ if (0 < precorder->fd) { close(precorder->fd); /* Close the file */ precorder->fd = -1; /* Clear out the FD */ } close(precorder->dev_fd); /* Close the device */ precorder->dev_fd = -1; /* Mark device as closed */ mq_close(precorder->mq); /* Close the message queue */ mq_unlink(precorder->mqname); /* Unlink the message queue */ precorder->state = NXRECORDER_STATE_IDLE; /* Go to IDLE */ sem_post(&precorder->sem); /* Release the semaphore */ /* The record thread is done with the context. Release it, which may * actually cause the context to be freed if the creator has already * abandoned (released) the context too. */ nxrecorder_release(precorder); audinfo("Exit\n"); return NULL; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxrecorder_pause * * nxrecorder_pause() pauses recordback without cancelling it. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME int nxrecorder_pause(FAR struct nxrecorder_s *precorder) { int ret = OK; if (precorder->state == NXRECORDER_STATE_RECORDING) { #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(precorder->dev_fd, AUDIOIOC_PAUSE, (unsigned long) precorder->session); #else ret = ioctl(precorder->dev_fd, AUDIOIOC_PAUSE, 0); #endif if (ret == OK) { precorder->state = NXRECORDER_STATE_PAUSED; } } return ret; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: nxrecorder_resume * * nxrecorder_resume() resumes recordback after a pause operation. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME int nxrecorder_resume(FAR struct nxrecorder_s *precorder) { int ret = OK; if (precorder->state == NXRECORDER_STATE_PAUSED) { #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(precorder->dev_fd, AUDIOIOC_RESUME, (unsigned long) precorder->session); #else ret = ioctl(precorder->dev_fd, AUDIOIOC_RESUME, 0); #endif if (ret == OK) { precorder->state = NXRECORDER_STATE_RECORDING; } } return ret; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: nxrecorder_setdevice * * nxrecorder_setdevice() sets the audio device to use with the provided * nxrecorder context. * ****************************************************************************/ int nxrecorder_setdevice(FAR struct nxrecorder_s *precorder, FAR const char *pdevice) { int temp_fd; DEBUGASSERT(precorder != NULL); DEBUGASSERT(pdevice != NULL); /* Try to open the device */ temp_fd = open(pdevice, O_RDWR); if (temp_fd == -1) { /* Error opening the device */ return -ENOENT; } close(temp_fd); /* Save the path and format capabilities of the device */ strncpy(precorder->device, pdevice, sizeof(precorder->device)); return OK; } /**************************************************************************** * Name: nxrecorder_stop * * nxrecorder_stop() stops the current recordback and closes the file and * the associated device. * * Input: * precorder Pointer to the initialized MRecorder context * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_STOP int nxrecorder_stop(FAR struct nxrecorder_s *precorder) { struct audio_msg_s term_msg; FAR void *value; DEBUGASSERT(precorder != NULL); /* Validate we are not in IDLE state */ sem_wait(&precorder->sem); /* Get the semaphore */ if (precorder->state == NXRECORDER_STATE_IDLE) { sem_post(&precorder->sem); /* Release the semaphore */ return OK; } sem_post(&precorder->sem); /* Notify the recordback thread that it needs to cancel the recordback */ term_msg.msg_id = AUDIO_MSG_STOP; term_msg.u.data = 0; mq_send(precorder->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_NXRECORDER_MSG_PRIO); /* Join the thread. The thread will do all the cleanup. */ pthread_join(precorder->record_id, &value); precorder->record_id = 0; return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_STOP */ /**************************************************************************** * Name: nxrecorder_recordraw * * nxrecorder_recordraw() tries to record the raw data file using the Audio * system. If a device is specified, it will try to use that * device. * Input: * precorder Pointer to the initialized MRecorder context * pfilename Pointer to the filename to record * nchannels channel num * bpsampe bit width * samprate sample rate * chmap channel map * * Returns: * OK File is being recorded * -EBUSY The media device is busy * -ENOSYS The media file is an unsupported type * -ENODEV No audio device suitable to record the media type * -ENOENT The media file was not found * ****************************************************************************/ int nxrecorder_recordraw(FAR struct nxrecorder_s *precorder, FAR const char *pfilename, uint8_t nchannels, uint8_t bpsamp, uint32_t samprate, uint8_t chmap) { struct mq_attr attr; struct sched_param sparam; pthread_attr_t tattr; struct audio_caps_desc_s cap_desc; struct ap_buffer_info_s buf_info; FAR void *value; int ret; DEBUGASSERT(precorder != NULL); DEBUGASSERT(pfilename != NULL); if (precorder->state != NXRECORDER_STATE_IDLE) { return -EBUSY; } audinfo("==============================\n"); audinfo("Recording file %s\n", pfilename); audinfo("==============================\n"); /* Test that the specified file exists */ if ((precorder->fd = open(pfilename, O_WRONLY | O_CREAT | O_TRUNC)) == -1) { /* File not found. Test if its in the mediadir */ auderr("ERROR: Could not open %s\n", pfilename); return -ENOENT; } /* Try to open the device */ ret = nxrecorder_opendevice(precorder); if (ret < 0) { /* Error opening the device */ auderr("ERROR: nxrecorder_opendevice failed: %d\n", ret); goto err_out_nodev; } /* Try to reserve the device */ #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(precorder->dev_fd, AUDIOIOC_RESERVE, (unsigned long)&precorder->session); #else ret = ioctl(precorder->dev_fd, AUDIOIOC_RESERVE, 0); #endif if (ret < 0) { /* Device is busy or error */ auderr("ERROR: Failed to reserve device: %d\n", ret); ret = -errno; goto err_out; } #ifdef CONFIG_AUDIO_MULTI_SESSION cap_desc.session = precorder->session; #endif cap_desc.caps.ac_len = sizeof(struct audio_caps_s); cap_desc.caps.ac_type = AUDIO_TYPE_INPUT; cap_desc.caps.ac_channels = nchannels ? nchannels : 2; cap_desc.caps.ac_chmap = chmap; cap_desc.caps.ac_controls.hw[0] = samprate ? samprate : 48000; cap_desc.caps.ac_controls.b[3] = samprate >> 16; cap_desc.caps.ac_controls.b[2] = bpsamp ? bpsamp : 16; ret = ioctl(precorder->dev_fd, AUDIOIOC_CONFIGURE, (unsigned long)&cap_desc); if (ret < 0) { ret = -errno; goto err_out; } /* Query the audio device for its preferred buffer count */ if (ioctl(precorder->dev_fd, AUDIOIOC_GETBUFFERINFO, (unsigned long)&buf_info) != OK) { /* Driver doesn't report its buffer size. Use our default. */ buf_info.nbuffers = CONFIG_AUDIO_NUM_BUFFERS; } /* Create a message queue for the recordthread */ attr.mq_maxmsg = buf_info.nbuffers + 8; attr.mq_msgsize = sizeof(struct audio_msg_s); attr.mq_curmsgs = 0; attr.mq_flags = 0; snprintf(precorder->mqname, sizeof(precorder->mqname), "/tmp/%0lx", (unsigned long)((uintptr_t)precorder)); precorder->mq = mq_open(precorder->mqname, O_RDWR | O_CREAT, 0644, &attr); if (precorder->mq == (mqd_t) -1) { /* Unable to open message queue! */ ret = -errno; auderr("ERROR: mq_open failed: %d\n", ret); goto err_out; } /* Register our message queue with the audio device */ ioctl(precorder->dev_fd, AUDIOIOC_REGISTERMQ, (unsigned long)precorder->mq); /* Check if there was a previous thread and join it if there was * to perform clean-up. */ if (precorder->record_id != 0) { pthread_join(precorder->record_id, &value); } /* Start the recordfile thread to stream the media file to the * audio device. */ pthread_attr_init(&tattr); sparam.sched_priority = sched_get_priority_max(SCHED_FIFO) - 9; pthread_attr_setschedparam(&tattr, &sparam); pthread_attr_setstacksize(&tattr, CONFIG_NXRECORDER_RECORDTHREAD_STACKSIZE); /* Add a reference count to the recorder for the thread and start the * thread. We increment for the thread to avoid thread start-up * race conditions. */ nxrecorder_reference(precorder); ret = pthread_create(&precorder->record_id, &tattr, nxrecorder_recordthread, (pthread_addr_t) precorder); if (ret != OK) { auderr("ERROR: Failed to create recordthread: %d\n", ret); goto err_out; } /* Name the thread */ pthread_setname_np(precorder->record_id, "recordthread"); return OK; err_out: close(precorder->dev_fd); precorder->dev_fd = -1; err_out_nodev: if (0 < precorder->fd) { close(precorder->fd); precorder->fd = -1; } return ret; } /**************************************************************************** * Name: nxrecorder_create * * nxrecorder_create() allocates and initializes a nxrecorder context for * use by further nxrecorder operations. This routine must be called * before to perform the create for proper reference counting. * * Input Parameters: None * * Returned values: * Pointer to the created context or NULL if there was an error. * ****************************************************************************/ FAR struct nxrecorder_s *nxrecorder_create(void) { FAR struct nxrecorder_s *precorder; /* Allocate the memory */ precorder = (FAR struct nxrecorder_s *) malloc( sizeof(struct nxrecorder_s)); if (precorder == NULL) { return NULL; } /* Initialize the context data */ precorder->state = NXRECORDER_STATE_IDLE; precorder->dev_fd = -1; precorder->fd = -1; precorder->device[0] = '\0'; precorder->mq = 0; precorder->record_id = 0; precorder->crefs = 1; #ifdef CONFIG_AUDIO_MULTI_SESSION precorder->session = NULL; #endif sem_init(&precorder->sem, 0, 1); return precorder; } /**************************************************************************** * Name: nxrecorder_release * * nxrecorder_release() reduces the reference count by one and if it * reaches zero, frees the context. * * Input Parameters: * precorder Pointer to the NxRecorder context * * Returned values: None * ****************************************************************************/ void nxrecorder_release(FAR struct nxrecorder_s *precorder) { int refcount; FAR void *value; /* Grab the semaphore */ while (sem_wait(&precorder->sem) < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); if (errcode != EINTR) { auderr("ERROR: sem_wait failed: %d\n", errcode); return; } } /* Check if there was a previous thread and join it if there was */ if (precorder->record_id != 0) { sem_post(&precorder->sem); pthread_join(precorder->record_id, &value); precorder->record_id = 0; while (sem_wait(&precorder->sem) < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); if (errcode != EINTR) { auderr("ERROR: sem_wait failed: %d\n", errcode); return; } } } /* Reduce the reference count */ refcount = precorder->crefs--; sem_post(&precorder->sem); /* If the ref count *was* one, then free the context */ if (refcount == 1) { free(precorder); } } /**************************************************************************** * Name: nxrecorder_reference * * nxrecorder_reference() increments the reference count by one. * * Input Parameters: * precorder Pointer to the NxRecorder context * * Returned values: None * ****************************************************************************/ void nxrecorder_reference(FAR struct nxrecorder_s *precorder) { /* Grab the semaphore */ while (sem_wait(&precorder->sem) < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); if (errcode != EINTR) { auderr("ERROR: sem_wait failed: %d\n", errcode); return; } } /* Increment the reference count */ precorder->crefs++; sem_post(&precorder->sem); }