/**************************************************************************** * apps/system/nxlooper/nxlooper_main.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include "system/readline.h" #include "system/nxlooper.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define NXLOOPER_VER "1.00" #ifdef CONFIG_NXLOOPER_INCLUDE_HELP # define NXLOOPER_HELP_TEXT(x) x #else # define NXLOOPER_HELP_TEXT(x) #endif /**************************************************************************** * Private Type Declarations ****************************************************************************/ typedef int (*nxlooper_func)(FAR struct nxlooper_s *plooper, char *pargs); struct mp_cmd_s { FAR const char *cmd; /* The command text */ FAR const char *arghelp; /* Text describing the args */ nxlooper_func pfunc; /* Pointer to command handler */ FAR const char *help; /* The help text */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int nxlooper_cmd_quit(FAR struct nxlooper_s *plooper, char *parg); static int nxlooper_cmd_loopback(FAR struct nxlooper_s *plooper, char *parg); #ifdef CONFIG_NXLOOPER_INCLUDE_SYSTEM_RESET static int nxlooper_cmd_reset(FAR struct nxlooper_s *plooper, char *parg); #endif #ifdef CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE static int nxlooper_cmd_device(FAR struct nxlooper_s *plooper, char *parg); #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME static int nxlooper_cmd_pause(FAR struct nxlooper_s *plooper, char *parg); static int nxlooper_cmd_resume(FAR struct nxlooper_s *plooper, char *parg); #endif #ifndef CONFIG_AUDIO_EXCLUDE_STOP static int nxlooper_cmd_stop(FAR struct nxlooper_s *plooper, char *parg); #endif #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static int nxlooper_cmd_volume(FAR struct nxlooper_s *plooper, char *parg); #endif #ifdef CONFIG_NXLOOPER_INCLUDE_HELP static int nxlooper_cmd_help(FAR struct nxlooper_s *plooper, char *parg); #endif /**************************************************************************** * Private Data ****************************************************************************/ static const struct mp_cmd_s g_nxlooper_cmds[] = { #ifdef CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE { "device", "devfile", nxlooper_cmd_device, NXLOOPER_HELP_TEXT("Specify a preferred play/record device") }, #endif #ifdef CONFIG_NXLOOPER_INCLUDE_HELP { "h", "", nxlooper_cmd_help, NXLOOPER_HELP_TEXT("Display help for commands") }, { "help", "", nxlooper_cmd_help, NXLOOPER_HELP_TEXT("Display help for commands") }, #endif { "loopback", "channels bpsamp samprate chmap", nxlooper_cmd_loopback, NXLOOPER_HELP_TEXT("Audio loopback test") }, #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME { "pause", "", nxlooper_cmd_pause, NXLOOPER_HELP_TEXT("Pause loopback") }, #endif #ifdef CONFIG_NXLOOPER_INCLUDE_SYSTEM_RESET { "reset", "", nxlooper_cmd_reset, NXLOOPER_HELP_TEXT("Perform a HW reset") }, #endif #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME { "resume", "", nxlooper_cmd_resume, NXLOOPER_HELP_TEXT("Resume loopback") }, #endif #ifndef CONFIG_AUDIO_EXCLUDE_STOP { "stop", "", nxlooper_cmd_stop, NXLOOPER_HELP_TEXT("Stop loopback") }, #endif { "q", "", nxlooper_cmd_quit, NXLOOPER_HELP_TEXT("Exit NxLooper") }, { "quit", "", nxlooper_cmd_quit, NXLOOPER_HELP_TEXT("Exit NxLooper") }, #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME { "volume", "d%", nxlooper_cmd_volume, NXLOOPER_HELP_TEXT("Set volume to level specified") } #endif }; static const int g_nxlooper_cmd_count = sizeof(g_nxlooper_cmds) / sizeof(struct mp_cmd_s); /**************************************************************************** * Name: nxlooper_cmd_loopback * * nxlooper_cmd_loop() play and record the raw data file using the nxlooper * context. * ****************************************************************************/ static int nxlooper_cmd_loopback(FAR struct nxlooper_s *plooper, char *parg) { int ret; int channels = 0; int bpsamp = 0; int samprate = 0; int chmap = 0; sscanf(parg, "%d %d %d %d", &channels, &bpsamp, &samprate, &chmap); /* Try to loopback raw data with settings specified */ ret = nxlooper_loopraw(plooper, channels, bpsamp, samprate, chmap); /* nxlooper_loopraw returned values: * * OK Loopback is being run * -EBUSY The media device is busy * -ENOSYS The audio format is not unsupported * -ENODEV No audio device suitable to play and record the media type */ switch (-ret) { case OK: break; case ENODEV: printf("No suitable Audio Device found\n"); break; case EBUSY: printf("Audio device busy\n"); break; case ENOSYS: printf("Unknown audio format\n"); break; default: printf("Error loopback test: %d\n", -ret); break; } return ret; } /**************************************************************************** * Name: nxlooper_cmd_volume * * nxlooper_cmd_volume() sets the volume level. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME static int nxlooper_cmd_volume(FAR struct nxlooper_s *plooper, char *parg) { uint16_t percent; /* If no arg given, then print current volume */ if (parg == NULL || *parg == '\0') { printf("volume: %d\n", plooper->volume / 10); } else { /* Get the percentage value from the argument */ percent = (uint16_t)(atof(parg) * 10.0); return nxlooper_setvolume(plooper, percent); } return OK; } #endif /**************************************************************************** * Name: nxlooper_cmd_reset * * nxlooper_cmd_reset() performs a HW reset of all the audio devices. * ****************************************************************************/ #ifdef CONFIG_NXLOOPER_INCLUDE_SYSTEM_RESET static int nxlooper_cmd_reset(FAR struct nxlooper_s *plooper, char *parg) { return nxlooper_systemreset(plooper); } #endif /**************************************************************************** * Name: nxlooper_cmd_stop * * nxlooper_cmd_stop() stops loopback * context. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_STOP static int nxlooper_cmd_stop(FAR struct nxlooper_s *plooper, char *parg) { /* Stop the loopback */ return nxlooper_stop(plooper); } #endif /**************************************************************************** * Name: nxlooper_cmd_pause * * nxlooper_cmd_pause() pauses loopback * context. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME static int nxlooper_cmd_pause(FAR struct nxlooper_s *plooper, char *parg) { /* Pause the loopback */ return nxlooper_pause(plooper); } #endif /**************************************************************************** * Name: nxlooper_cmd_resume * * nxlooper_cmd_resume() resumes loopback * context. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME static int nxlooper_cmd_resume(FAR struct nxlooper_s *plooper, char *parg) { /* Resume the loopback */ return nxlooper_resume(plooper); } #endif /**************************************************************************** * Name: nxlooper_cmd_device * * nxlooper_cmd_device() sets the preferred audio device for loopback * ****************************************************************************/ #ifdef CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE static int nxlooper_cmd_device(FAR struct nxlooper_s *plooper, char *parg) { int ret; char path[PATH_MAX]; /* First try to open the file directly */ ret = nxlooper_setdevice(plooper, parg); if (ret == -ENOENT) { /* Append the /dev/audio path and try again */ #ifdef CONFIG_AUDIO_CUSTOM_DEV_PATH #ifdef CONFIG_AUDIO_DEV_ROOT snprintf(path, sizeof(path), "/dev/%s", parg); #else snprintf(path, sizeof(path), CONFIG_AUDIO_DEV_PATH "/%s", parg); #endif #else snprintf(path, sizeof(path), "/dev/audio/%s", parg); #endif ret = nxlooper_setdevice(plooper, path); } /* Test if the device file exists */ if (ret == -ENOENT) { /* Device doesn't exit. Report error */ printf("Device %s not found\n", parg); return ret; } /* Test if is is an audio device */ if (ret == -ENODEV) { printf("Device %s is not an audio device\n", parg); return ret; } if (ret < 0) { return ret; } /* Device set successfully */ return OK; } #endif /* CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE */ /**************************************************************************** * Name: nxlooper_cmd_quit * * nxlooper_cmd_quit() terminates the application ****************************************************************************/ static int nxlooper_cmd_quit(FAR struct nxlooper_s *plooper, char *parg) { /* Stop the loopback if any */ #ifndef CONFIG_AUDIO_EXCLUDE_STOP return nxlooper_stop(plooper); #endif return OK; } /**************************************************************************** * Name: nxlooper_cmd_help * * nxlooper_cmd_help() displays the application's help information on * supported commands and command syntax. ****************************************************************************/ #ifdef CONFIG_NXLOOPER_INCLUDE_HELP static int nxlooper_cmd_help(FAR struct nxlooper_s *plooper, char *parg) { int len; int maxlen = 0; int x; int c; /* Calculate length of longest cmd + arghelp */ for (x = 0; x < g_nxlooper_cmd_count; x++) { len = strlen(g_nxlooper_cmds[x].cmd) + strlen(g_nxlooper_cmds[x].arghelp); if (len > maxlen) { maxlen = len; } } printf("NxLooper commands\n================\n"); for (x = 0; x < g_nxlooper_cmd_count; x++) { /* Print the command and it's arguments */ printf(" %s %s", g_nxlooper_cmds[x].cmd, g_nxlooper_cmds[x].arghelp); /* Calculate number of spaces to print before the help text */ len = maxlen - (strlen(g_nxlooper_cmds[x].cmd) + strlen(g_nxlooper_cmds[x].arghelp)); for (c = 0; c < len; c++) { printf(" "); } printf(" : %s\n", g_nxlooper_cmds[x].help); } return OK; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxlooper * * nxlooper() reads in commands from the console using the readline * system add-in and impalements a command-line based media loop * tester that uses the NuttX audio system to record and then play * raw data from the lower audio driver. Commands are provided for * setting volume, base and other audio features, as well as for * pausing and stopping the test. * * Input Parameters: * buf - The user allocated buffer to be filled. * buflen - the size of the buffer. * instream - The stream to read characters from * outstream - The stream to each characters to. * * Returned values: * On success, the (positive) number of bytes transferred is returned. * EOF is returned to indicate either an end of file condition or a * failure. * ****************************************************************************/ int main(int argc, FAR char *argv[]) { char buffer[CONFIG_NSH_LINELEN]; int len; int x; int running; FAR char *cmd; FAR char *arg; FAR struct nxlooper_s *plooper; printf("NxLooper version " NXLOOPER_VER "\n"); printf("h for commands, q to exit\n"); printf("\n"); /* Initialize our NxLooper context */ plooper = nxlooper_create(); if (plooper == NULL) { printf("Error: Out of RAM\n"); return -ENOMEM; } /* Loop until the user exits */ running = TRUE; while (running) { /* Print a prompt */ printf("nxlooper> "); fflush(stdout); /* Read a line from the terminal */ len = readline(buffer, sizeof(buffer), stdin, stdout); if (len > 0) { buffer[len] = '\0'; if (strncmp(buffer, "!", 1) != 0) { /* nxlooper command */ if (buffer[len - 1] == '\n') { buffer[len - 1] = '\0'; } /* Parse the command from the argument */ cmd = strtok_r(buffer, " \n", &arg); if (cmd == NULL) { continue; } /* Find the command in our cmd array */ for (x = 0; x < g_nxlooper_cmd_count; x++) { if (strcmp(cmd, g_nxlooper_cmds[x].cmd) == 0) { /* Command found. Call it's handler if not NULL */ if (g_nxlooper_cmds[x].pfunc != NULL) { g_nxlooper_cmds[x].pfunc(plooper, arg); } /* Test if it is a quit command */ if (g_nxlooper_cmds[x].pfunc == nxlooper_cmd_quit) { running = FALSE; } break; } } } else { #ifdef CONFIG_SYSTEM_SYSTEM /* Transfer nuttx shell */ system(buffer + 1); #else printf("%s: unknown nxlooper command\n", buffer); #endif } } } /* Release the NxLooper context */ nxlooper_release(plooper); return OK; }