# Examples / `tcpblaster` TCP Performance Test

To set up, do `make menuconfig` and select the _Apps_ → _Examples_ →
_tcpblaster_. By default, nuttx will the be the client which sends data; and the
host computer (Linux, macOS, or Windows) will be the server.

Set up networking so the nuttx computer can ping the host, and the host can ping
nuttx. Now you are ready to run the test.

On host:

```
$ ./tcpserver
Binding to IPv4 Address: 00000000
server: Accepting connections on port 5471
```

On nuttx:

```
nsh> tcpclient
Connecting to IPv4 Address: 0100000a
client: Connected
[2014-07-31 00:16:15.000] 0: Sent 200 4096-byte buffers:    800.0 KB (avg   4.0 KB) in   0.18 seconds ( 4444.4 KB/second)
```

Now on the host you should see something like:

```
$ ./tcpserver
Binding to IPv4 Address: 00000000
server: Accepting connections on port 5471
server: Connection accepted -- receiving
[2020-02-22 16:17:07.000] 0: Received 200 buffers:   502.9 KB (buffer average size:   2.5 KB) in   0.12 seconds ( 4194.8 KB/second)
[2020-02-22 16:17:07.000] 1: Received 200 buffers:   393.1 KB (buffer average size:   2.0 KB) in   0.09 seconds ( 4299.4 KB/second)
```

This will tell you the link speed in KB/sec – kilobytes per second. If you want
kilobits, multiply by `8`.

You can use the `make menuconfig` to reverse the setup, and have nuttx be the
server, and the host be the client. If you do that, start the server first
(nuttx), then start the client (host).