#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config EXAMPLES_NETTEST
	bool "Network test example"
	default n
	depends on NET_TCP
	---help---
		Enable the network test example

if EXAMPLES_NETTEST

config EXAMPLES_NETTEST_PROGNAME
	string "Program name"
	default "nettest"
	depends on BUILD_KERNEL
	---help---
		This is the name of the program that will be use when the Nettest
		program is installed.

config EXAMPLES_NETTEST_STACKSIZE
	int "Nettest stack size"
	default 2048

config EXAMPLES_NETTEST_PRIORITY
	int "Nettest priority"
	default 100

config EXAMPLES_NETTEST_LOOPBACK
	bool "Loopback test"
	default n
	depends on NET_LOOPBACK || IEEE802154_LOOPBACK
	---help---
		Perform the test using the local loopback device.  In this case,
		both the client and the server reside on the target.

if EXAMPLES_NETTEST_LOOPBACK

config EXAMPLES_NETTEST_SERVER_STACKSIZE
	int "Server stack size"
	default 2048

config EXAMPLES_NETTEST_SERVER_PRIORITY
	int "Server priority"
	default 100

endif # EXAMPLES_NETTEST_LOOPBACK

config EXAMPLES_NETTEST_SERVER
	bool "Target is server"
	default n
	depends on !EXAMPLES_NETTEST_LOOPBACK
	---help---
		Select to use the host as the client side of the test.  Default:  The
		target is the client side of the test

config EXAMPLES_NETTEST_PERFORMANCE
	bool "Test for Performance"
	default n
	---help---
		Configure the example to test for network performance.  Default:  Test
		is for network functionality.

choice
	prompt "IP Domain"
	default EXAMPLES_NETTEST_IPv4 if NET_IPv4
	default EXAMPLES_NETTEST_IPv6 if NET_IPv6 && !NET_IPv4

config EXAMPLES_NETTEST_IPv4
	bool "IPv4"
	depends on NET_IPv4

config EXAMPLES_NETTEST_IPv6
	bool "IPv6"
	depends on NET_IPv6

endchoice # IP Domain

config EXAMPLES_NETTEST_INIT
	bool "Initialize network"
	default n if NSH_BUILTIN_APPS
	default y if !NSH_BUILTIN_APPS
	depends on !BUILD_KERNEL && !EXAMPLES_NETTEST_LOOPBACK
	---help---
		Include logic to initialize the network.  This should not be done if
		the network is already initialized when nettest runs.  This is
		usually the case, for example, when nettest is run as an NSH built-
		in task.

config EXAMPLES_NETTEST_NOMAC
	bool "Use Canned MAC Address"
	default n
	depends on EXAMPLES_NETTEST_INIT

if EXAMPLES_NETTEST_IPv4

comment "IPv4 addresses"

if EXAMPLES_NETTEST_INIT

config EXAMPLES_NETTEST_IPADDR
	hex "Target IP address"
	default 0x0a000002

config EXAMPLES_NETTEST_DRIPADDR
	hex "Default Router IP address (Gateway)"
	default 0x0a000001

config EXAMPLES_NETTEST_NETMASK
	hex "Network Mask"
	default 0xffffff00

endif # EXAMPLES_NETTEST_INIT

if !EXAMPLES_NETTEST_LOOPBACK

config EXAMPLES_NETTEST_CLIENTIP
	hex "Client IP Address"
	default 0x0a000001 if !EXAMPLES_NETTEST_SERVER
	default 0x0a000002 if EXAMPLES_NETTEST_SERVER
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

endif # !EXAMPLES_NETTEST_LOOPBACK
endif # EXAMPLES_NETTEST_IPv4

if EXAMPLES_NETTEST_IPv6
if !NET_ICMPv6_AUTOCONF

comment "Target IPv6 address"

if EXAMPLES_NETTEST_INIT

config EXAMPLES_NETTEST_IPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the first of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the second of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the third of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fourth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fifth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the sixth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the seventh of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_8
	hex "[7]"
	default 0x0002
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the last of the 8-values.  The
		default for all eight values is fc00::2.

comment "Router IPv6 address"

config EXAMPLES_NETTEST_DRIPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the first of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the second of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the third of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fourth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fifth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the sixth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the seventh of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_8
	hex "[7]"
	default 0x0001
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the last of the
		8-values.  The default for all eight values is fc00::1.

comment "IPv6 Network mask"

config EXAMPLES_NETTEST_IPv6NETMASK_1
	hex "[0]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the first of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_2
	hex "[1]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the second of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_3
	hex "[2]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the third of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_4
	hex "[3]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fourth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_5
	hex "[4]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fifth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_6
	hex "[5]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the sixth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_7
	hex "[6]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the seventh of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_8
	hex "[7]"
	default 0xff80
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the eighth of the 8-values.  The default for
		all eight values is fe00::0.

endif # NET_ICMPv6_AUTOCONF
endif # EXAMPLES_NETTEST_INIT

if !EXAMPLES_NETTEST_LOOPBACK || !NET_LOOPBACK

comment "Client IPv6 address"

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the first of the 8-values.

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the second of the 8-values.

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the Third of the 8-values.

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the fourth of the 8-values.

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the fifth of the 8-values.

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the sixth of the 8-values.

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the seventh of the 8-values.

config EXAMPLES_NETTEST_CLIENTIPv6ADDR_8
	hex "[7]"
	default 0x0001 if !EXAMPLES_NETTEST_SERVER
	default 0x0002 if EXAMPLES_NETTEST_SERVER
	range 0x0 0xffff
	---help---
		IP address of the client.  If the target is the client, then
		EXAMPLES_NETTEST_CLIENTIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the server,
		then the default value of EXAMPLES_NETTEST_CLIENTIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the last of the 8-values.

endif # !EXAMPLES_NETTEST_LOOPBACK
endif # EXAMPLES_NETTEST_IPv6
endif # EXAMPLES_NETTEST