# # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # config NETUTILS_PTPD bool "PTPD client/server" default n depends on NET_IPv4 depends on NET_IGMP depends on NET_UDP ---help--- Build a minimal implementation of IEEE-1588 precision time protocol. Uses system gettimeofday() and adjtime() calls to synchronize clock with a master clock through network, or to provide a master clock to other systems. if NETUTILS_PTPD config NETUTILS_PTPD_DEBUG bool "Enable PTP debug messages" default n depends on DEBUG_INFO ---help--- Enable PTP debug messages even if CONFIG_DEBUG_NET_INFO is not enabled. config NETUTILS_PTPD_CLIENT bool "Enable client support" default y ---help--- Act as a PTP client, synchronizing the NuttX clock to a remote master clock. config NETUTILS_PTPD_SERVER bool "Enable server support" default n ---help--- Act as a PTP server, providing NuttX clock time to other systems. Both server and client can be simultaneously enabled. NuttX will then synchronize to a higher priority master clock, or act as a master clock itself if it has the highest priority. Refer to Best Master Clock algorithm in IEEE-1588 for details. config NETUTILS_PTPD_STACKSIZE int "PTP daemon stack stack size" default DEFAULT_TASK_STACKSIZE config NETUTILS_PTPD_SERVERPRIO int "PTP daemon priority" default 100 config NETUTILS_PTPD_DOMAIN int "PTP domain selection" default 0 range 0 127 ---help--- Set PTP domain to participate in. Default domain is 0, other domains can be used to isolate reference clocks from each other. if NETUTILS_PTPD_SERVER config NETUTILS_PTPD_PRIORITY1 int "PTP server priority1" default 128 range 0 255 ---help--- Set clock priority to announce when acting as a PTP server. Lower value is higher priority. A higher priority1 clock will be selected without regard to announced clock quality fields. Refer to Best Master Clock algorithm in IEEE-1588 for details. config NETUTILS_PTPD_PRIORITY2 int "PTP server priority2" default 128 range 0 255 ---help--- Set clock subpriority to announce when acting as a PTP server. This will distinguish between two clocks that are equivalent in priority1, class and accuracy values. Lower value is higher priority. config NETUTILS_PTPD_CLASS int "PTP server class" default 248 range 0 255 ---help--- Set master clock class to announce when acting as a PTP server. Lower value means higher quality clock source. 248 is the default for unknown class. config NETUTILS_PTPD_ACCURACY int "PTP server accuracy" default 254 range 0 255 ---help--- Set master clock accuracy to announce when acting as a PTP server. Logarithmic scale is defined in IEEE-1588: 32: +- 25 ns 33: +- 100 ns 34: +- 250 ns 35: +- 1 us 36: +- 2.5 us 37: +- 10 us 38: +- 25 us 39: +- 100 us 40: +- 250 us 41: +- 1 ms 42: +- 2.5 ms 43: +- 10 ms 44: +- 25 ms 45: +- 100 ms 46: +- 250 ms 47: +- 1 s 48: +- 10 s 49: +- more than 10 s 254: Unknown config NETUTILS_PTPD_CLOCKSOURCE int "PTP server clock source type" default 160 range 0 255 ---help--- Set clock source type to announce when acting as a PTP server. Common values: 32: GPS 64: PTP 80: NTP 144: Other 160: Internal oscillator config NETUTILS_PTPD_SYNC_INTERVAL_MSEC int "PTP server sync transmit interval (ms)" default 1000 ---help--- How often to transmit sync packets in server mode. config NETUTILS_PTPD_ANNOUNCE_INTERVAL_MSEC int "PTP server announce transmit interval (ms)" default 10000 ---help--- How often to transmit announce packets in server mode. config NETUTILS_PTPD_TWOSTEP_SYNC bool "PTP server sends two-step synchronization packets" default y ---help--- If enabled, sends a follow-up packet after every sync packet. This helps compensate for the time taken to initiate the transmission. config NETUTILS_PTPD_DELAYRESP_INTERVAL int "PTP server suggested interval of delay requests" range 0 255 default 4 ---help--- When responding to a delay request, the server can inform the client how often it should test path delay. This is done using header field logMessageInterval. The delay will be 2^N seconds. Default value 4 results in 16 second interval. endif # NETUTILS_PTPD_SERVER if NETUTILS_PTPD_CLIENT config NETUTILS_PTPD_TIMEOUT_MS int "PTP client timeout for changing clock source (ms)" default 60000 ---help--- If no packets are being received from currently chosen clock source, fall back to next best clock source after this many seconds. config NETUTILS_PTPD_SETTIME_THRESHOLD_MS int "PTP client threshold for changing system time (ms)" default 1000 ---help--- If difference between local and remote clock exceeds this threshold, time is reset with settimeofday() instead of changing the rate with adjtime(). config NETUTILS_PTPD_MULTICAST_TIMEOUT_MS int "PTP client timeout to rejoin multicast group (ms)" default 30000 ---help--- If no PTP multicast packets are being received, attempt to rejoin the multicast group. This can be necessary if network topology changes, or depending on hardware, after some error recovery events. Set to 0 to disable. config NETUTILS_PTPD_DRIFT_AVERAGE_S int "PTP client clock drift rate averaging time (s)" default 600 range 10 86400 ---help--- Clock drift rate is averaged over this time pediod. Larger value gives more stable estimate but reacts slower to crystal oscillator speed changes (such as caused by temperature changes). config NETUTILS_PTPD_SEND_DELAYREQ bool "PTP client enable delay requests" default n ---help--- If enabled, sends delay request messages to measure the network delay to server. If disabled, assumes zero delay. if NETUTILS_PTPD_SEND_DELAYREQ config NETUTILS_PTPD_MAX_PATH_DELAY_NS int "PTP client maximum path delay (ns)" default 100000 range 1 1000000000 ---help--- Measured path delay longer than this is ignored. Delay requests are also not transmitted until clock synchronization is better than this. config NETUTILS_PTPD_DELAYREQ_AVGCOUNT int "PTP client path delay averaging count" default 100 ---help--- Measured path delay is averaged over this many samples. endif # NETUTILS_PTPD_SEND_DELAYREQ endif # NETUTILS_PTPD_CLIENT endif # NETUTILS_PTPD