/**************************************************************************** * apps/nshlib/nsh_netinit.c * * Copyright (C) 2010-2012, 2014-2016 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * This is influenced by similar logic from uIP: * * Author: Adam Dunkels * Copyright (c) 2003, Adam Dunkels. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include /* Is network initialization debug forced on? */ #ifdef CONFIG_NSH_NETINIT_DEBUG # undef CONFIG_DEBUG_INFO # define CONFIG_DEBUG_INFO 1 # undef CONFIG_DEBUG_NET # define CONFIG_DEBUG_NET 1 #endif #include #include #include #include #include #include #include #include #include #include #include #include #include "netutils/netlib.h" #if defined(CONFIG_NSH_DHCPC) || defined(CONFIG_NSH_DNS) # include "netutils/dhcpc.h" #endif #ifdef CONFIG_NET_6LOWPAN # include #endif #ifdef CONFIG_NETUTILS_NTPCLIENT # include "netutils/ntpclient.h" #endif #include "nsh.h" #ifdef CONFIG_NSH_NETINIT /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Pick one and at most one supported link layer so that all decisions are * made consistently. * * NOTE: Ethernet should always be selected with IEEE 802.11 */ #if defined(CONFIG_NET_ETHERNET) # undef CONFIG_NET_6LOWPAN # undef CONFIG_NET_SLIP # undef CONFIG_NET_TUN # undef CONFIG_NET_LOCAL # undef CONFIG_NET_USRSOCK # undef CONFIG_NET_LOOPBACK #elif defined(CONFIG_NET_6LOWPAN) # undef CONFIG_NET_SLIP # undef CONFIG_NET_TUN # undef CONFIG_NET_LOCAL # undef CONFIG_NET_USRSOCK # undef CONFIG_NET_LOOPBACK #elif defined(CONFIG_NET_SLIP) # undef CONFIG_NET_TUN # undef CONFIG_NET_LOCAL # undef CONFIG_NET_USRSOCK # undef CONFIG_NET_LOOPBACK #elif defined(CONFIG_NET_TUN) # undef CONFIG_NET_LOCAL # undef CONFIG_NET_USRSOCK # undef CONFIG_NET_LOOPBACK #elif defined(CONFIG_NET_LOCAL) # undef CONFIG_NET_USRSOCK # undef CONFIG_NET_LOOPBACK #elif defined(CONFIG_NET_USRSOCK) # undef CONFIG_NET_LOOPBACK #endif /* Only Ethernet and 6LoWPAN have MAC layer addresses */ #undef HAVE_MAC #if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_NET_6LOWPAN) # define HAVE_MAC 1 #endif /* Currently there is only logic in 6LoWPAN configurations to * set the IEEE 802.15.4 addresses. */ #undef HAVE_EADDR #if defined(CONFIG_NET_6LOWPAN) # if defined(CONFIG_WIRELESS_IEEE802154) # define HAVE_EADDR 1 # elif defined(CONFIG_WIRELESS_PKTRADIO) # warning Missing logic # endif #endif /* Provide a default DNS address */ #if defined(CONFIG_NSH_DRIPADDR) && !defined(CONFIG_NSH_DNSIPADDR) # define CONFIG_NSH_DNSIPADDR CONFIG_NSH_DRIPADDR #endif /* SLIP-specific configuration * * REVISIT: How will we handle Ethernet and SLIP networks together? In the * future, NSH will need to be extended to handle multiple networks with * mixed transports. */ #ifdef CONFIG_NET_MULILINK # warning REVISIT: CONFIG_NET_MULILINK multilink support incomplete #endif /* Select the single network device name supported this this network * initialization logci. If multiple interfaces are present with different * link types, the order of definition in the following conditional * logic will select the one interface that will be used (which might * not be the one that you want). */ #if defined(CONFIG_DRIVERS_IEEE80211) /* Usually also has CONFIG_NET_ETHERNET */ # define NET_DEVNAME "wlan0" # define NSH_HAVE_NETDEV #elif defined(CONFIG_NET_ETHERNET) # define NET_DEVNAME "eth0" # define NSH_HAVE_NETDEV #elif defined(CONFIG_NET_6LOWPAN) # define NET_DEVNAME "wpan0" # define NSH_HAVE_NETDEV #elif defined(CONFIG_NET_SLIP) # define NET_DEVNAME "sl0" # ifndef CONFIG_NSH_NOMAC # error "CONFIG_NSH_NOMAC must be defined for SLIP" # endif # define NSH_HAVE_NETDEV #elif defined(CONFIG_NET_TUN) # define NET_DEVNAME "tun0" # define NSH_HAVE_NETDEV #elif defined(CONFIG_NET_LOCAL) # define NET_DEVNAME "lo" # define NSH_HAVE_NETDEV #elif defined(CONFIG_NET_USRSOCK) # undef NSH_HAVE_NETDEV #elif !defined(CONFIG_NET_LOOPBACK) # error ERROR: No link layer protocol defined #endif /* If we have no network device (only only the local loopback device), then we * cannot support the network monitor. */ #ifndef NSH_HAVE_NETDEV # undef CONFIG_NSH_NETINIT_MONITOR #endif /* We need a valid IP domain (any domain) to create a socket that we can use * to comunicate with the network device. */ #if defined(CONFIG_NET_IPv4) # define AF_INETX AF_INET #elif defined(CONFIG_NET_IPv6) # define AF_INETX AF_INET6 #endif /* While the network is up, the network monitor really does nothing. It * will wait for a very long time while waiting, it can be awakened by a * signal indicating a change in network status. */ #define LONG_TIME_SEC (60*60) /* One hour in seconds */ #define SHORT_TIME_SEC (2) /* 2 seconds */ /**************************************************************************** * Private Data ****************************************************************************/ #ifdef CONFIG_NSH_NETINIT_MONITOR static sem_t g_notify_sem; #endif #if defined(CONFIG_NET_IPv6) && !defined(CONFIG_NET_ICMPv6_AUTOCONF) && \ !defined(CONFIG_NET_6LOWPAN) /* Host IPv6 address */ static const uint16_t g_ipv6_hostaddr[8] = { HTONS(CONFIG_NSH_IPv6ADDR_1), HTONS(CONFIG_NSH_IPv6ADDR_2), HTONS(CONFIG_NSH_IPv6ADDR_3), HTONS(CONFIG_NSH_IPv6ADDR_4), HTONS(CONFIG_NSH_IPv6ADDR_5), HTONS(CONFIG_NSH_IPv6ADDR_6), HTONS(CONFIG_NSH_IPv6ADDR_7), HTONS(CONFIG_NSH_IPv6ADDR_8), }; /* Default routine IPv6 address */ static const uint16_t g_ipv6_draddr[8] = { HTONS(CONFIG_NSH_DRIPv6ADDR_1), HTONS(CONFIG_NSH_DRIPv6ADDR_2), HTONS(CONFIG_NSH_DRIPv6ADDR_3), HTONS(CONFIG_NSH_DRIPv6ADDR_4), HTONS(CONFIG_NSH_DRIPv6ADDR_5), HTONS(CONFIG_NSH_DRIPv6ADDR_6), HTONS(CONFIG_NSH_DRIPv6ADDR_7), HTONS(CONFIG_NSH_DRIPv6ADDR_8), }; /* IPv6 netmask */ static const uint16_t g_ipv6_netmask[8] = { HTONS(CONFIG_NSH_IPv6NETMASK_1), HTONS(CONFIG_NSH_IPv6NETMASK_2), HTONS(CONFIG_NSH_IPv6NETMASK_3), HTONS(CONFIG_NSH_IPv6NETMASK_4), HTONS(CONFIG_NSH_IPv6NETMASK_5), HTONS(CONFIG_NSH_IPv6NETMASK_6), HTONS(CONFIG_NSH_IPv6NETMASK_7), HTONS(CONFIG_NSH_IPv6NETMASK_8), }; #endif /* CONFIG_NET_IPv6 && !CONFIG_NET_ICMPv6_AUTOCONF && !CONFIG_NET_6LOWPAN */ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nsh_set_macaddr * * Description: * Set the hardware MAC address if the hardware is not capable of doing * that for itself. * ****************************************************************************/ #if defined(NSH_HAVE_NETDEV) && defined(CONFIG_NSH_NOMAC) && defined(HAVE_MAC) static void nsh_set_macaddr(void) { #if defined(CONFIG_NET_ETHERNET) uint8_t mac[IFHWADDRLEN]; #elif defined(HAVE_EADDR) uint8_t eaddr[8]; #endif /* Many embedded network interfaces must have a software assigned MAC */ #if defined(CONFIG_NET_ETHERNET) /* Use the configured, fixed MAC address */ mac[0] = (CONFIG_NSH_MACADDR >> (8 * 5)) & 0xff; mac[1] = (CONFIG_NSH_MACADDR >> (8 * 4)) & 0xff; mac[2] = (CONFIG_NSH_MACADDR >> (8 * 3)) & 0xff; mac[3] = (CONFIG_NSH_MACADDR >> (8 * 2)) & 0xff; mac[4] = (CONFIG_NSH_MACADDR >> (8 * 1)) & 0xff; mac[5] = (CONFIG_NSH_MACADDR >> (8 * 0)) & 0xff; /* Set the MAC address */ netlib_setmacaddr(NET_DEVNAME, mac); #elif defined(HAVE_EADDR) /* Use the configured, fixed extended address */ eaddr[0] = (CONFIG_NSH_MACADDR >> (8 * 7)) & 0xff; eaddr[1] = (CONFIG_NSH_MACADDR >> (8 * 6)) & 0xff; eaddr[2] = (CONFIG_NSH_MACADDR >> (8 * 5)) & 0xff; eaddr[3] = (CONFIG_NSH_MACADDR >> (8 * 4)) & 0xff; eaddr[4] = (CONFIG_NSH_MACADDR >> (8 * 3)) & 0xff; eaddr[5] = (CONFIG_NSH_MACADDR >> (8 * 2)) & 0xff; eaddr[6] = (CONFIG_NSH_MACADDR >> (8 * 1)) & 0xff; eaddr[7] = (CONFIG_NSH_MACADDR >> (8 * 0)) & 0xff; /* Set the 6LoWPAN extended address */ (void)netlib_seteaddr(NET_DEVNAME, eaddr); #endif /* CONFIG_NET_ETHERNET or HAVE_EADDR */ } #else # define nsh_set_macaddr() #endif /**************************************************************************** * Name: nsh_set_ipaddrs * * Description: * Setup IP addresses. * * For 6LoWPAN, the IP address derives from the MAC address. Setting it * to any user provided value is asking for trouble. * ****************************************************************************/ #if defined(NSH_HAVE_NETDEV) && !defined(CONFIG_NET_6LOWPAN) static void nsh_set_ipaddrs(void) { #ifdef CONFIG_NET_IPv4 struct in_addr addr; /* Set up our host address */ #ifndef CONFIG_NSH_DHCPC addr.s_addr = HTONL(CONFIG_NSH_IPADDR); #else addr.s_addr = 0; #endif netlib_set_ipv4addr(NET_DEVNAME, &addr); /* Set up the default router address */ addr.s_addr = HTONL(CONFIG_NSH_DRIPADDR); netlib_set_dripv4addr(NET_DEVNAME, &addr); /* Setup the subnet mask */ addr.s_addr = HTONL(CONFIG_NSH_NETMASK); netlib_set_ipv4netmask(NET_DEVNAME, &addr); #endif #ifdef CONFIG_NET_IPv6 #ifdef CONFIG_NET_ICMPv6_AUTOCONF /* Perform ICMPv6 auto-configuration */ netlib_icmpv6_autoconfiguration(NET_DEVNAME); #else /* CONFIG_NET_ICMPv6_AUTOCONF */ /* Set up our fixed host address */ netlib_set_ipv6addr(NET_DEVNAME, (FAR const struct in6_addr *)g_ipv6_hostaddr); /* Set up the default router address */ netlib_set_dripv6addr(NET_DEVNAME, (FAR const struct in6_addr *)g_ipv6_draddr); /* Setup the subnet mask */ netlib_set_ipv6netmask(NET_DEVNAME, (FAR const struct in6_addr *)g_ipv6_netmask); #endif /* CONFIG_NET_ICMPv6_AUTOCONF */ #endif /* CONFIG_NET_IPv6 */ #ifdef CONFIG_NSH_DNS addr.s_addr = HTONL(CONFIG_NSH_DNSIPADDR); netlib_set_ipv4dnsaddr(&addr); #endif } #else # define nsh_set_ipaddrs() #endif /**************************************************************************** * Name: nsh_net_bringup() * * Description: * Bring up the configured network * ****************************************************************************/ #if defined(NSH_HAVE_NETDEV) && !defined(CONFIG_NSH_NETLOCAL) static void nsh_net_bringup(void) { #ifdef CONFIG_NSH_DHCPC uint8_t mac[IFHWADDRLEN]; FAR void *handle; #endif /* Bring the network up. */ netlib_ifup(NET_DEVNAME); #ifdef CONFIG_WIRELESS_WAPI /* Associate the wlan with an access point. */ nsh_associate(NET_DEVNAME); #endif #ifdef CONFIG_NSH_DHCPC /* Get the MAC address of the NIC */ netlib_getmacaddr(NET_DEVNAME, mac); /* Set up the DHCPC modules */ handle = dhcpc_open(NET_DEVNAME, &mac, IFHWADDRLEN); /* Get an IP address. Note that there is no logic for renewing the IP address in this * example. The address should be renewed in ds.lease_time/2 seconds. */ if (handle != NULL) { struct dhcpc_state ds; (void)dhcpc_request(handle, &ds); netlib_set_ipv4addr(NET_DEVNAME, &ds.ipaddr); if (ds.netmask.s_addr != 0) { netlib_set_ipv4netmask(NET_DEVNAME, &ds.netmask); } if (ds.default_router.s_addr != 0) { netlib_set_dripv4addr(NET_DEVNAME, &ds.default_router); } if (ds.dnsaddr.s_addr != 0) { netlib_set_ipv4dnsaddr(&ds.dnsaddr); } dhcpc_close(handle); } #endif #ifdef CONFIG_NETUTILS_NTPCLIENT /* Start the NTP client */ ntpc_start(); #endif } #else # define nsh_net_bringup() #endif /**************************************************************************** * Name: nsh_netinit_configure * * Description: * Initialize the network per the selected NuttX configuration * ****************************************************************************/ static void nsh_netinit_configure(void) { #ifdef NSH_HAVE_NETDEV /* Many embedded network interfaces must have a software assigned MAC */ nsh_set_macaddr(); /* Set up IP addresses */ nsh_set_ipaddrs(); /* That completes the 'local' initialization of the network device. */ #ifndef CONFIG_NSH_NETLOCAL /* Bring the network up. */ nsh_net_bringup(); #endif #endif /* NSH_HAVE_NETDEV */ } /**************************************************************************** * Name: nsh_netinit_signal * * Description: * This signal handler responds to changes in PHY status. * ****************************************************************************/ #ifdef CONFIG_NSH_NETINIT_MONITOR static void nsh_netinit_signal(int signo, FAR siginfo_t *siginfo, FAR void * context) { int semcount; int ret; /* What is the count on the semaphore? Don't over-post */ ret = sem_getvalue(&g_notify_sem, &semcount); ninfo("Entry: semcount=%d\n", semcount); if (ret == OK && semcount <= 0) { sem_post(&g_notify_sem); } ninfo("Exit\n"); } #endif /**************************************************************************** * Name: nsh_netinit_monitor * * Description: * Monitor link status, gracefully taking the link up and down as the * link becomes available or as the link is lost. * ****************************************************************************/ #ifdef CONFIG_NSH_NETINIT_MONITOR static int nsh_netinit_monitor(void) { struct timespec abstime; struct timespec reltime; struct ifreq ifr; struct sigaction act; bool devup; int ret; int sd; ninfo("Entry\n"); /* Initialize the notification semaphore */ DEBUGVERIFY(sem_init(&g_notify_sem, 0, 0)); /* Get a socket descriptor that we can use to communicate with the network * interface driver. */ sd = socket(AF_INETX, SOCK_DGRAM, 0); if (sd < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: Failed to create a socket: %d\n", ret); goto errout; } /* Attach a signal handler so that we do not lose PHY events */ act.sa_sigaction = nsh_netinit_signal; act.sa_flags = SA_SIGINFO; ret = sigaction(CONFIG_NSH_NETINIT_SIGNO, &act, NULL); if (ret < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: sigaction() failed: %d\n", ret); goto errout_with_socket; } /* Now loop, waiting for changes in link status */ for (;;) { /* Configure to receive a signal on changes in link status */ strncpy(ifr.ifr_name, NET_DEVNAME, IFNAMSIZ); ifr.ifr_mii_notify_pid = 0; /* PID=0 means this task */ ifr.ifr_mii_notify_signo = CONFIG_NSH_NETINIT_SIGNO; ifr.ifr_mii_notify_arg = NULL; ret = ioctl(sd, SIOCMIINOTIFY, (unsigned long)&ifr); if (ret < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: ioctl(SIOCMIINOTIFY) failed: %d\n", ret); goto errout_with_sigaction; } /* Does the driver think that the link is up or down? */ ret = ioctl(sd, SIOCGIFFLAGS, (unsigned long)&ifr); if (ret < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: ioctl(SIOCGIFFLAGS) failed: %d\n", ret); goto errout_with_notification; } devup = ((ifr.ifr_flags & IFF_UP) != 0); /* Get the current PHY address in use. This probably does not change, * but just in case... * * NOTE: We are assuming that the network device name is preserved in * the ifr structure. */ ret = ioctl(sd, SIOCGMIIPHY, (unsigned long)&ifr); if (ret < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: ioctl(SIOCGMIIPHY) failed: %d\n", ret); goto errout_with_notification; } /* Read the PHY status register */ ifr.ifr_mii_reg_num = MII_MSR; ret = ioctl(sd, SIOCGMIIREG, (unsigned long)&ifr); if (ret < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: ioctl(SIOCGMIIREG) failed: %d\n", ret); goto errout_with_notification; } ninfo("%s: devup=%d PHY address=%02x MSR=%04x\n", ifr.ifr_name, devup, ifr.ifr_mii_phy_id, ifr.ifr_mii_val_out); /* Check for link up or down */ if ((ifr.ifr_mii_val_out & MII_MSR_LINKSTATUS) != 0) { /* Link up... does the drive think that the link is up? */ if (!devup) { /* No... We just transitioned from link down to link up. * Bring the link up. */ ninfo("Bringing the link up\n"); ifr.ifr_flags = IFF_UP; ret = ioctl(sd, SIOCSIFFLAGS, (unsigned long)&ifr); if (ret < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: ioctl(SIOCSIFFLAGS) failed: %d\n", ret); goto errout_with_notification; } /* And wait for a short delay. We will want to recheck the * link status again soon. */ reltime.tv_sec = SHORT_TIME_SEC; reltime.tv_nsec = 0; } else { /* The link is still up. Take a long, well-deserved rest */ reltime.tv_sec = LONG_TIME_SEC; reltime.tv_nsec = 0; } } else { /* Link down... Was the driver link state already down? */ if (devup) { /* No... we just transitioned from link up to link down. Take * the link down. */ ninfo("Taking the link down\n"); ifr.ifr_flags = IFF_DOWN; ret = ioctl(sd, SIOCSIFFLAGS, (unsigned long)&ifr); if (ret < 0) { ret = -errno; DEBUGASSERT(ret < 0); nerr("ERROR: ioctl(SIOCSIFFLAGS) failed: %d\n", ret); goto errout_with_notification; } } /* In either case, wait for the short, configurable delay */ reltime.tv_sec = CONFIG_NSH_NETINIT_RETRYMSEC / 1000; reltime.tv_nsec = (CONFIG_NSH_NETINIT_RETRYMSEC % 1000) * 1000000; } /* Now wait for either the semaphore to be posted for a timed-out to * occur. */ sched_lock(); DEBUGVERIFY(clock_gettime(CLOCK_REALTIME, &abstime)); abstime.tv_sec += reltime.tv_sec; abstime.tv_nsec += reltime.tv_nsec; if (abstime.tv_nsec >= 1000000000) { abstime.tv_sec++; abstime.tv_nsec -= 1000000000; } (void)sem_timedwait(&g_notify_sem, &abstime); sched_unlock(); } /* TODO: Stop the PHY notifications and remove the signal handler. */ errout_with_notification: # warning Missing logic errout_with_sigaction: # warning Missing logic errout_with_socket: close(sd); errout: nerr("ERROR: Aborting\n"); return ret; } #endif /**************************************************************************** * Name: nsh_netinit_thread * * Description: * Initialize the network per the selected NuttX configuration * ****************************************************************************/ #ifdef CONFIG_NSH_NETINIT_THREAD static pthread_addr_t nsh_netinit_thread(pthread_addr_t arg) { ninfo("Entry\n"); /* Configure the network */ nsh_netinit_configure(); #ifdef CONFIG_NSH_NETINIT_MONITOR /* Monitor the network status */ nsh_netinit_monitor(); #endif ninfo("Exit\n"); return NULL; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nsh_netinit * * Description: * Initialize the network per the selected NuttX configuration * ****************************************************************************/ int nsh_netinit(void) { #ifdef CONFIG_NSH_NETINIT_THREAD struct sched_param sparam; pthread_attr_t attr; pthread_t tid; int ret; /* Start the network initialization thread to perform the network bring-up * asynchronously. */ pthread_attr_init(&attr); sparam.sched_priority = CONFIG_NSH_NETINIT_THREAD_PRIORITY; (void)pthread_attr_setschedparam(&attr, &sparam); (void)pthread_attr_setstacksize(&attr, CONFIG_NSH_NETINIT_THREAD_STACKSIZE); ninfo("Starting netinit thread\n"); ret = pthread_create(&tid, &attr, nsh_netinit_thread, NULL); if (ret != OK) { nerr("ERROR: Failed to create netinit thread: %d\n", ret); (void)nsh_netinit_thread(NULL); } else { /* Detach the thread because we will not be joining to it */ (void)pthread_detach(tid); /* Name the thread */ pthread_setname_np(tid, "netinit"); } return OK; #else /* Perform network initialization sequentially */ nsh_netinit_configure(); return OK; #endif } #endif /* CONFIG_NSH_NETINIT */