#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menu "NxWM"

config NXWM
	tristate "NxWM"
	default n
	depends on NXWIDGETS
	---help---
		Enable support for the NuttX Tiny Window Manager (NxWM)

if NXWM

menu "NxWM General Settings"

config NXWM_LARGE_ICONS
	bool "Use large icons"
	default n
	select NXGLYPHS_LARGE_ICONS
	---help---
		The default icons are nominally 25x25 pixels for a small
		resolution/display, this is a good selection.  For example, a
		320x240 display that is 4.5cm x 3.375 would have a resolution of
		about 71 dots per cm.  In this case, the icon would be 0.35cm.

		If you use a larger display, these smaller icons may seem
		inappropriately small.  In this case, you have two options:  (1)
		Enable image scaling which will make the icons "fuzzy" looking, or
		(2) select this option to enable use of larger icons.

config NXWM_CUSTOM_FONTID
	bool "Use Custom Default Font"
	default n
	---help---
		Set to override the system default font id (NXFONT_DEFAULT).

if NXWM_CUSTOM_FONTID

config NXWM_DEFAULT_FONTID
	int "Font ID"
	default 0
	---help---
		Use this NxWM default font ID instead of the system font ID
		(NXFONT_DEFAULT).  Default: 0

endif # NXWM_CUSTOM_FONTID

comment "Color configuration"

config NXWM_CUSTOM_FILLCOLORS
	bool "Custom Default Fill Colors"
	default n
	---help---
		Select custom default colors for the widget background.  If defined,
		the hexadecimal values for all filled colors must be provided
		(there are no default colors because the hexadecimal representation
		of the default colors depend on the pixel depth). Default: n

if NXWM_CUSTOM_FILLCOLORS

config NXWM_DEFAULT_BACKGROUNDCOLOR
	hex "Background Color"
	---help---
		Normal background color.  Default: RGB(148,189,215)

config NXWM_DEFAULT_SELECTEDBACKGROUNDCOLOR
	hex "Normal Background Color"
	---help---
		Select background color. Default:  RGB(206,227,241)

endif # NXWM_DEFAULT_BACKGROUNDCOLOR

config NXWM_CUSTOM_EDGECOLORS
	bool "Custom Default Edge Colors"
	default n
	---help---
		Select custom default colors for the widget edges.  If defined,
		then hexadecimal values for all edge colors must be provided
		(there are no default colors because the hexadecimal representation
		of the default colors depend on the pixel depth). Default: n.

if NXWM_CUSTOM_EDGECOLORS

config NXWM_DEFAULT_SHINEEDGECOLOR
	hex "Shiny Edge Color"
	---help---
		Color of the bright edge of a border. Default: RGB(255,255,255)

config NXWM_DEFAULT_SHADOWEDGECOLOR
	hex "Shadow Edge Color"
	---help---
		Color of the shadowed edge of a border. Default: RGB(0,0,0)

endif # NXWM_CUSTOM_EDGECOLORS

config NXWM_CUSTOM_TEXTCOLORS
	bool "Custom Default Text colors"
	default n
	---help---
		Select custom colors for the widget text.  If defined, then
		hexadecimal values for all text colors must be provided
		(there are no default colors because the hexadecimal representation
		of the default colors depend on the pixel depth). Default: n.

if NXWM_CUSTOM_TEXTCOLORS

config NXWM_DEFAULT_FONTCOLOR
	hex "Default Font Color"
	---help---
		Default fong color.  Default: RGB(0,0,0)

config NXWM_TRANSPARENT_COLOR
	hex "Transparent Color"
	default 0x0
	---help---
		The "transparent" color.  Default: RGB(0,0,0)

endif # NXWM_CUSTOM_TEXTCOLORS

comment "Background Image"

config NXWM_DISABLE_BACKGROUND_IMAGE
	bool "Disable Background Image"
	default n if !NXWM_DISABLE_MINIMIZE
	default y if NXWM_DISABLE_MINIMIZE
	---help---
		Disable support for the "Desktop" background image.

config NXWM_BACKGROUND_IMAGE
	string "Background Image"
	default "NXWidgets::g_nuttxBitmap160x160"
	depends on !NXWM_DISABLE_BACKGROUND_IMAGE
	---help---
		The name of the image to use in the background window.  Default:
		"NXWidgets::g_nuttxBitmap160x160"

endmenu # NxWM General Configuration

menu "NxWM Taskbar Configuration"
comment "Horizontal and vertical spacing of icons in the task bar"

config NXWM_TASKBAR_VSPACING
	int "Vertical Spacing"
	default 2
	---help---
		Vertical spacing.  Default: 2 pixels

config NXWM_TASKBAR_HSPACING
	int "Horizontal Spacing"
	default 2
	---help---
		Horizontal spacing.  Default: 2 rows

choice NXWM_TASKBAR_LOCATION
	prompt "Taskbar Location"
	default NXWM_TASKBAR_TOP

config NXWM_TASKBAR_TOP
	bool "Top"
	---help---
		Task bar is at the top of the display

config NXWM_TASKBAR_BOTTOM
	bool "Bottom"
	---help---
		Task bar is at the bottom of the display

config NXWM_TASKBAR_LEFT
	bool "Left"
	---help---
		Task bar is on the left side of the display

config NXWM_TASKBAR_RIGHT
	bool "Right"
	---help---
		Task bar is on the right side of the display

endchoice

config NXWM_CUSTOM_TASKBAR_WIDTH
	bool "Use Custom Taskbar width"
	default n
	---help---
		Set to override the default taskbar thickness (either vertical or
		horizontal).  The default depends on the selected horizontal or
		vertical spacing. Default: 25 + 2*spacing

if NXWM_CUSTOM_TASKBAR_WIDTH

config NXWM_TASKBAR_WIDTH
	int "Taskbar Width"
	default 29 if !NXWM_LARGE_ICONS
	default 54 if !NXWM_LARGE_ICONS
	---help---
		Task bar thickness (either vertical or horizontal).  Default: 25 + 2*2

endif # NXWM_CUSTOM_TASKBAR_WIDTH

config NXWM_TASKBAR_ICONSCALE
	bool "Scale Icons"
	default n
	---help---
		Enable scaling of icons in the task bar

if NXWM_TASKBAR_ICONSCALE

config NXWM_TASKBAR_ICONWIDTH
	int "Icon Width (pixels)"
	default 50
	---help---
		Scaled width of each taskbar ICON in pixels.

config NXWM_TASKBAR_ICONHEIGHT
	int "Icon Height (rows)"
	default 42
	---help---
		Scaled height of each taskbar ICON in pixels.

endif # NXWM_TASKBAR_ICONSCALE

config NXWM_DISABLE_MINIMIZE
	bool "Disable Minimize Button"
	default n
	---help---
		If the "desktop" is empty, users have no need to minimize any
		windows. If the buttons are small, it's easy to hit minimize
		button accidentally when trying to close an application.

config NXWM_TASKBAR_NO_BORDER
	bool "Suppress Taskbar border"
	default n
	---help---
		Suppress drawing a the border around the taskbar.

endmenu # NxWM Taskbar Configuration

menu "NxWM Toolbar Configuration"

config NXWM_CUSTOM_TOOLBAR_HEIGHT
	bool "Use Custom Toolbar Height"
	default n
	---help---
		Set to override the default tooldar height The default depends on
		the selected horizontal or vertical spacing. Default: 21 + 2*spacing
		or 42 + 2*spacing if large icons are selected

if NXWM_CUSTOM_TOOLBAR_HEIGHT

config NXWM_TOOLBAR_HEIGHT
	int "Toolbar Height"
	default 25 if !NXWM_LARGE_ICONS
	default 46 if NXWM_LARGE_ICONS
	---help---
		The height of the tool bar in each application window. At present,
		all icons are 21 pixels in height and, hence, require a task bar of
		at least that size.  Default:  21 + 2*2or 42 + 2*spacing if large
		icons are selected

endif # NXWM_CUSTOM_TOOLBAR_HEIGHT

config NXWM_TOOLBAR_CUSTOM_FONTID
	bool "Use Custom Toolbar Font"
	default n
	---help---
		Set to override the NxWM default font id (NXWM_DEFAULT_FONTID).

if NXWM_TOOLBAR_CUSTOM_FONTID

config NXWM_TOOLBAR_FONTID
	int "Toolbar Font ID"
	default 0
	---help---
		Use this default font ID in the NxTerm window instead of the
		NxWM font ID (NXWM_DEFAULT_FONTID).  Default: 0 (maybe invalid)

endif # NXWM_TOOLBAR_CUSTOM_FONTID
endmenu # NxWM Toolbar Configuration

menu "NxWM Application Window Configuration"

config NXWM_CUSTOM_APPWINDOW_ICONS
	bool "Custom Start/Stop Application Window Icons"
	default n
	---help---
		Select to override the default Application Window Stop and Minimize Icons.

if NXWM_CUSTOM_APPWINDOW_ICONS

config NXWM_STOP_BITMAP
	string "Stop Icon"
	default "NXWidgets::g_stopBitmap"
	---help---
		The glyph to use as the Stop icon.  Default: NXWidgets::g_stopBitmap

config NXWM_MINIMIZE_BITMAP
	string "Minimize Icon"
	default "NXWidgets::g_minimizeBitmap"
	---help---
		The glyph to use as the Minimize icon.  Default: NXWidgets::g_minimizeBitmap

endif # NXWM_CUSTOM_APPWINDOW_ICONS
endmenu # NxWM Application Window Configuration

menu "NxWM Start Window Configuration"
comment "Horizontal and vertical spacing of icons in the task bar"

config NXWM_STARTWINDOW_VSPACING
	int "Vertical Spacing"
	default 4
	---help---
		Vertical spacing.  Default: 4 pixels

config NXWM_STARTWINDOW_HSPACING
	int "Horizontal Spacing"
	default 4
	---help---
		Horizontal spacing.  Default: 4 rows

config NXWM_CUSTOM_STARTWINDOW_ICON
	bool "Custom Start Window Icon"
	default n
	---help---
		Select to override the default Start Window Icon: NXWidgets::g_playBitmap

if NXWM_CUSTOM_STARTWINDOW_ICON

config NXWM_STARTWINDOW_ICON
	string "StartWindow Icon"
	default "NXWidgets::g_playBitmap"
	---help---
		The glyph to use as the start window icon.  Default: NXWidgets::g_playBitmap

endif # NXWM_CUSTOM_STARTWINDOW_ICON

config NXWM_STARTWINDOW_MQNAME
	string "Message Queue Name"
	default "nxwm"
	---help---
		The well known name of the message queue. Used to communicated from
		CWindowMessenger to the start window thread.  Default: "nxwm"

config NXWM_STARTWINDOW_MXMSGS
	int "Max Messages"
	default 32
	---help---
		The maximum number of messages to queue before blocking.  Default 32

config NXWM_STARTWINDOW_MXMPRIO
	int "Message Priority"
	default 42
	---help---
		The message priority. Default: 42.

config NXWM_STARTWINDOW_PRIO
	int "StartWindow Task Priority"
	default 100
	---help---
		Priority of the StartWindow task.  Default: 100.

		NOTE:  This priority should be less than NXSTART_SERVERPRIO or else
		there may be data overrun errors. Such errors would most likely appear
		as duplicated rows of data on the display.

config NXWM_STARTWINDOW_STACKSIZE
	int "StartWindow Task Stack Size"
	default DEFAULT_TASK_STACKSIZE
	---help---
		The stack size to use when starting the StartWindow task.  Default:
		2048 bytes.

endmenu # Start Window Configuration

menu "NxTerm Window Settings"

config NXWM_NXTERM
	bool "NxTerm Window"
	default y
	---help---
		Enable support for the NxTerm window which provides a text window
		in which you can interact with NSH.

if NXWM_NXTERM

config NXWM_NXTERM_PRIO
	int "NxTerm Task Priority"
	default 100
	---help---
		Priority of the NxTerm task.  Default:  100.

		NOTE:  This priority should be less than NXSTART_SERVERPRIO or
		else there may be data overrun errors. Such errors would most likely
		appear as duplicated rows of data on the display.

config NXWM_NXTERM_STACKSIZE
	int "NxTerm Task Stack Size"
	default DEFAULT_TASK_STACKSIZE
	---help---
		The stack size to use when starting the NxTerm task.  Default:
		2048 bytes.

config NXWM_NXTERM_CUSTOM_COLORS
	bool "Custom NxTerm Colors"
	default n
	---help---
		Select custom default colors for the NxTerm window.  If defined,
		the hexadecimal values for all NxTerm colors must be provided
		(there are no default colors because the hexadecimal representation
		of the default colors depend on the pixel depth). Default: n

if NXWM_NXTERM_CUSTOM_COLORS

config NXWM_NXTERM_WCOLOR
	hex "NxTerm Background Color"
	---help---
		The color of the NxTerm window background. Default:
		RGB(192,192,192)

config NXWM_NXTERM_FONTCOLOR
	hex "NxTerm Font Color"
	---help---
		The color of the fonts to use in the NxTerm window.
		Default: RGB(0,0,0)

endif # NXWM_NXTERM_CUSTOM_COLORS

config NXWM_NXTERM_CUSTOM_FONTID
	bool "Use Custom Default Font"
	default n
	---help---
		Set to override the NxWM default font id (NXWM_DEFAULT_FONTID).

if NXWM_NXTERM_CUSTOM_FONTID

config NXWM_NXTERM_FONTID
	int "NxTerm Font ID"
	default 0
	---help---
		Use this default font ID in the NxTerm window instead of the
		NxWM font ID (NXWM_DEFAULT_FONTID).  Default: 0

endif # NXWM_NXTERM_CUSTOM_FONTID

config NXWM_CUSTOM_NXTERM_ICON
	bool "Custom NxTerm Icon"
	default n
	---help---
		Select to override the default NxTerm Window Icon: NXWidgets::g_cmdBitmap

if NXWM_CUSTOM_NXTERM_ICON

config NXWM_NXTERM_ICON
	string "NxTerm Icon"
	default "NXWidgets::g_cmdBitmap"
	---help---
		The glyph to use as the NxTerm icon.  Default: NXWidgets::g_cmdBitmap

endif # NXWM_NXTERM_ICON
endif # NXWM_NXTERM
endmenu # NxTerm Window Settings

menu "NxWM Touchscreen Configuration"

config NXWM_TOUCHSCREEN
	bool "Touchscreen Support"
	default y if INPUT
	default n if !INPUT
	---help---
		Define to build in touchscreen support.

if NXWM_TOUCHSCREEN

comment "Touchscreen Device Settings"

config NXWM_TOUCHSCREEN_DEVNO
	int "Touchscreen Device Number"
	default 0
	---help---
		Touchscreen device minor number, i.e., the N in /dev/inputN.
		Default: 0

config NXWM_TOUCHSCREEN_DEVPATH
	string "Touchscreen Device Path"
	default "/dev/input0"
	---help---
		The full path to the touchscreen device. Default: "/dev/input0"

config NXWM_TOUCHSCREEN_SIGNO
	int "Touchscreen Signal Number"
	default 5
	---help---
		The realtime signal used to wake up the touchscreen listener
		thread.  Default: 5

config NXWM_TOUCHSCREEN_LISTENERPRIO
	int "Touchscreen Listener Task Priority"
	default 120
	---help---
		Priority of the touchscreen listener thread.  This listener should
		have a higher priority than most display-related tsks otherwise it
		may miss touchscreen events. Default: 120

config NXWM_TOUCHSCREEN_LISTENERSTACK
	int "Touchscreen Listener Task Stack Size"
	default 1024
	---help---
		Touchscreen listener thread stack size.  Default 1024

config NXWM_TOUCHSCREEN_CONFIGDATA
	bool "Touchscreen configuration data"
	default n
	depends on PLATFORM_CONFIGDATA
	---help---
		If the architecture supports retention of configuration data, then
		you may select this option to save touchscreen configuration data.
		Otherwise, the touchscreen calibration must be performed each time
		that you boot the system.

endif # NXWM_TOUCHSCREEN
endmenu # NxWM Touchscreen Configuration

menu "NxWM Keyboard Configuration"

config NXWM_KEYBOARD
	bool "Keyboard Support"
	default n
	---help---
		Define to build in keyboard support.

if NXWM_KEYBOARD

comment "Keyboard Device Settings"

config NXWM_KEYBOARD_DEVPATH
	string "Keyboard Device Path"
	default "/dev/console"
	---help---
		The full path to the keyboard device. Default: "/dev/console"

config NXWM_KEYBOARD_USBHOST
	bool "USB Keyboard Device"
	default n
	---help---
		This setting indicates that NXWM_KEYBOARD_DEVPATH is a USB keyboard.
		A USB Keyboard is a removable device. When it is inserted, then
		device at NXWM_KEYBOARD_DEVPATH will appear; when it removed,
		keyboard reads will fail and the device at NXWM_KEYBOARD_DEVPATH
		will disappear.  Selecting this option builds additional logic into
		the keyboard listener thread in order to handle this case.

config NXWM_KEYBOARD_SIGNO
	int "Keyboard Task Signal Number"
	default 6
	---help---
		The realtime signal used to wake up the keyboard listener thread.
		Default: 6

config NXWM_KEYBOARD_BUFSIZE
	int "Keyboard Buffer Size"
	default 16
	---help---
		The size of the keyboard read data buffer. Default: 16

config NXWM_KEYBOARD_LISTENERPRIO
	int "Keyboard Listener Task Priority"
	default 120
	---help---
		Priority of the keyboard listener thread. This listener should
		have a higher priority than most display-related tasks otherwise it
		may miss keyboard input (not really very likely because keyboard
		input is relatively slow). Default: 120

config NXWM_KEYBOARD_LISTENERSTACK
	int "Keyboard Listener Task Stack Size"
	default DEFAULT_TASK_STACKSIZE
	---help---
		Keyboard listener thread stack size.  Default: 1024

endif # NXWM_KEYBOARD
endmenu # NxWM Keyboard Configuration

menu "NxWM Calibration Display Settings"

config NXWM_CALIBRATION_MARGIN
	int "Calibration Margin"
	default 40
	---help---
		The Calbration display consists of a target press offset from the edges
		of the display by this number of pixels (in the horizontal direction)
		or rows (in the vertical).  The closer that you can comfortably
		position the press positions to the edge, the more accurate will be the
		linear interpolation (provide that the hardware provides equally good
		measurements near the edges).

config NXWM_CALIBRATION_CUSTOM_COLORS
	bool "Custom Calibration Colors"
	default n
	---help---
		Select custom default colors for the calibration window.  If
		defined, the hexadecimal values for all calibration window
		colors must be provided (there are no default colors because
		the hexadecimal representation of the default colors depend
		on the pixel depth). Default: n

if NXWM_CALIBRATION_CUSTOM_COLORS

config NXWM_CALIBRATION_BACKGROUNDCOLOR
	hex "Background Color"
	---help---
		The background color of the touchscreen calibration display.
		Default:  Same as NXWM_DEFAULT_BACKGROUNDCOLOR.

config NXWM_CALIBRATION_LINECOLOR
	hex "Line Color"
	---help---
		The color of the lines used in the touchscreen calibration display.
		Default:  RGB(0, 0, 128) (dark blue)

config NXWM_CALIBRATION_CIRCLECOLOR
	hex "Normal Circle Color"
	---help---
		The color of the circle in the touchscreen calibration display.
		Default:  RGB(255, 255, 255) (white)

config NXWM_CALIBRATION_TOUCHEDCOLOR
	hex "Touched Circle Color"
	---help---
		The color of the circle in the touchscreen calibration display after
		the touch is recorder.  Default: RGB(255, 255, 96) (very light yellow)

endif # NXWM_CALIBRATION_CUSTOM_COLORS

config NXWM_CALIBRATION_MESSAGES
	bool "Add Instructions in Center"
	default n
	---help---
		By default, the calibration screen is clear except for the
		calibration touchpoints.  If this options are enabled, then
		instructions when to touch and when to release the touch will
		be added in the center of the display,

if NXWM_CALIBRATION_MESSAGES

config NXWM_CALIBRATION_CUSTOM_FONTID
	bool "Use a Custom Font in Calibration Display"
	default n
	---help---
		Set to override the system default font id (NXFONT_DEFAULT).

if NXWM_CALIBRATION_CUSTOM_FONTID

config NXWM_CALIBRATION_FONTID
	int "Calibration Font ID"
	default 0
	---help---
		Use this default NxWidgets font ID instead of the system font ID
		(NXFONT_DEFAULT).  Default: 0

endif # NXWM_CALIBRATION_CUSTOM_FONTID

config NXWM_CALIBRATION_AVERAGE
	bool "Average Samples"
	default n
	---help---
		Collect multiple samples at each calibration position and use the
		average of the samples.  NOTE that is option is not available if we are
		not providing instructions on the display.  That is because it would
		be impossible to know what to do if we are collecting multiple samples
		at each position.

if NXWM_CALIBRATION_AVERAGE

config NXWM_CALIBRATION_NSAMPLES
	int "Number of Samples in Average"
	default 4
	range 2 255
	---help---
		This is the number of samples to use in the average.

config NXWM_CALIBRATION_DISCARD_MINMAX
	bool "Discard minimum and maximum values"
	default n
	---help---
		Discard the largest and smallest values before averaging.  This
		setting is ignored if NXWM_CALIBRATION_NSAMPLES < 3.

endif # NXWM_CALIBRATION_AVERAGE
endif # NXWM_CALIBRATION_MESSAGES

config NXWM_CALIBRATION_ANISOTROPIC
	bool "Anisotropic Scaling"
	default n
	---help---
		Most touchscreens have the property that the X value consistent across
		the entire vertical range of the display, i.e., if you press in the
		upper left of the display and in the low right of the display, then
		only the Y value will change.  This is true of some touchscreens:
		For some touchscreens the X values in the same vertical column will
		change as the Y values change.  Here I use the term anisotropic to
		describe that (that is not really the correct use of term term, but
		I have not yet thought of a better name).

		If you have such an LCD, then you may select this option to enable
		some much more complex scaling alorithms to handle this case.  Not
		only are these algorithms more complex, but they are (currently)
		implemented using floating point.  As a result, you should not select
		this option if you have a lower end MCU without hardware floating
		point support.

config NXWM_CUSTOM_CALIBRATION_ICON
	bool "Custom Calibration Icon"
	default n
	---help---
		Select to override the default Calibration Window Icon:
		NXWidgets::g_calibrationBitmap

if NXWM_CUSTOM_CALIBRATION_ICON

config NXWM_CALIBRATION_ICON
	string "Calibration Icon"
	default "NXWidgets::g_calibrationBitmap"
	---help---
		The ICON to use for the touchscreen calibration application. Default:
		NXWidgets::g_calibrationBitmap

endif # NXWM_CUSTOM_CALIBRATION_ICON

config NXWM_CALIBRATION_SIGNO
	int "Calibration Signal Number"
	default 5
	---help---
		The realtime signal used to wake up the touchscreen calibration
		thread.  Default: 5

config NXWM_CALIBRATION_LISTENERPRIO
	int "Calibration Task Priority"
	default 100
	---help---
		Priority of the calibration listener thread.  Default: 100

config NXWM_CALIBRATION_LISTENERSTACK
	int "Calibration Task Stack Size"
	default DEFAULT_TASK_STACKSIZE
	---help---
		Calibration listener thread stack size.  Default 2048

endmenu # NxWM Calibration Display Settings

menu "NxWM Hex Calculator Display Settings"

config NXWM_HEXCALCULATOR_CUSTOM_COLORS
	bool "Custom Hex Calculator Colors"
	default n
	---help---
		Select custom default colors for the Hex Calculator window.  If
		defined, the hexadecimal values for all hex calculator colors
		must be provided (there are no default colors because the
		hexadecimal representation of the default colors depend on the
		pixel depth). Default: n

if NXWM_HEXCALCULATOR_CUSTOM_COLORS

config NXWM_HEXCALCULATOR_BACKGROUNDCOLOR
	hex "Calculator Background Color"
	---help---
		The background color of the calculator display.  Default:  Same
		as NXWM_DEFAULT_BACKGROUNDCOLOR

endif # NXWM_HEXCALCULATOR_CUSTOM_COLORS

config NXWM_CUSTOM_HEXCALCULATOR_ICON
	bool "Custom Hex Calculator Icon"
	default n
	---help---
		Select to override the default Hex Calculator Window Icon:
		NXWidgets::g_calculatorBitmap

if NXWM_CUSTOM_HEXCALCULATOR_ICON

config NXWM_HEXCALCULATOR_ICON
	string "Calculator Icon"
	default "NXWidgets::g_calculatorBitmap"
	---help---
		The ICON to use for the hex calculator application.  Default:
		"NXWidgets::g_calculatorBitmap"

endif # NXWM_CUSTOM_HEXCALCULATOR_ICON

config NXWM_HEXCALCULATOR_CUSTOM_FONTID
	bool "Use Custom Default Font"
	default n
	---help---
		Set to override the NxWM default font id (NXWM_DEFAULT_FONTID).

if NXWM_HEXCALCULATOR_CUSTOM_FONTID

config NXWM_HEXCALCULATOR_FONTID
	int "Calculator Font ID"
	default 0
	---help---
		Use this default font ID in the calculator window instead of the
		NxWM font ID (NXWM_DEFAULT_FONTID).  Default: 0

endif # NXWM_HEXCALCULATOR_FONTID
endmenu # NxWM Hex Calculator Display Dettings

menu "NxWM Media Player Display Settings"

config NXWM_MEDIAPLAYER
	bool "NxWM Media Player"
	default n
	depends on SYSTEM_NXPLAYER
	---help---
		Enable support for the MP3 Media Player.  This features requires
		a board that includes an MP3 Codec chip, such as the Mikromedia
		boards available from MikroElektronica, along with a NuttX port
		with a device driver for the MP3 codec.

		NOTE:  This application is currently under development and just
		a shell of an app which will be developed soon.

if NXWM_MEDIAPLAYER

menu "NxPlayer Integration"

config NXWM_MEDIAPLAYER_PREFERRED_DEVICE
	string "Preferred audio device"
	default "pcm0"
	depends on NXPLAYER_INCLUDE_PREFERRED_DEVICE
	---help---
		NxPlayer expects us to specify a preferred audio device.  This
		selection allows us to identify that preferred audio device.  This
		device is identified by a simple name string that corresponds to an
		audio device that can be found under /dev/audio.

endmenu # NxPlayer Integration

menu "Media File Configuration"

config NXWM_MEDIAPLAYER_MEDIAPATH
	string "Path to media"
	default "/mnt/sdcard"
	---help---
		This is the full path to the mount point of the storage device
		containing all of the media files accessible by the media player.

config NXWM_MEDIAPLAYER_NOFILTER
	bool "Disable filtering by file name extension"
	default y

config NXWM_MEDIAPLAYER_FILTER
	bool
	default n

if !NXWM_MEDIAPLAYER_NOFILTER

config NXWM_MEDIAPLAYER_FILTER_AC3
	bool "Accept .ac3 extension"
	default n
	select NXWM_MEDIAPLAYER_FILTER

config NXWM_MEDIAPLAYER_FILTER_DTS
	bool "Accept .dts extension"
	default n
	select NXWM_MEDIAPLAYER_FILTER

config NXWM_MEDIAPLAYER_FILTER_WAV
	bool "Accept .wav extension"
	default y
	select NXWM_MEDIAPLAYER_FILTER

config NXWM_MEDIAPLAYER_FILTER_PCM
	bool "Accept .pcm extension"
	default n
	select NXWM_MEDIAPLAYER_FILTER

config NXWM_MEDIAPLAYER_FILTER_MP3
	bool "Accept .mp3 extension"
	default n
	select NXWM_MEDIAPLAYER_FILTER

config NXWM_MEDIAPLAYER_FILTER_MIDI
	bool "Accept .mid extension"
	default n
	select NXWM_MEDIAPLAYER_FILTER

config NXWM_MEDIAPLAYER_FILTER_WMA
	bool "Accept .wma extension"
	default n
	select NXWM_MEDIAPLAYER_FILTER

config NXWM_MEDIAPLAYER_FILTER_OGGVORBIS
	bool "Accept .ogg extension"
	default n
	select NXWM_MEDIAPLAYER_FILTER

endif # !NXWM_MEDIAPLAYER_NOFILTER
endmenu # Media File Configuration

menu "General Look and Feel"

config NXWM_MEDIAPLAYER_XSPACING
	int "Media Player Horizontal Spacing"
	default 12
	---help---
		This is the space between play, forward, and reverse controls in
		units of pixels.

config NXWM_MEDIAPLAYER_YSPACING
	int "Media Player Vertical Spacing"
	default 8
	---help---
		This is the space between vertical element: (1) list box, (2) play,
		forward, and reverse controls, and the volume slider in units of
		lines.

config NXWM_MEDIAPLAYER_CUSTOM_COLORS
	bool "Select Custom Media Player Colors"
	default n

if NXWM_MEDIAPLAYER_CUSTOM_COLORS

	config NXWM_MEDIAPLAYER_VOLUMECOLOR
	hex "Media Volume Slide Color"
	default 0x0

endif # NXWM_MEDIAPLAYER_CUSTOM_COLORS

config NXWM_MEDIAPLAYER_BORDERS
	bool "Media Player Button Borders"
	default n
	---help---
		If you have nice graphics, then borderless would probably be the
		better choice.  If you graphics is really more of a button label,
		then have buttons with boarders might make more sense.

endmenu # General Look and Feel

menu "Volume Control Configuration"

config NXWM_MEDIAPLAYER_VOLUMESTEP
	int "Media Player Volume Step"
	default 5
	---help---
		This increment in volume, up or down, when the volume bar is clicked.

config NXWM_MEDIAPLAYER_MINVOLUMEHEIGHT
	int "Minimum Player Volume Minimum Height"
	default 6
	---help---
		The height of the slider is automatically calculated from the height
		of the grip image.  However, we will not let the height of the grip
		get smaller than this value.

		NOTE: This width includes the size of the slider upper and lower
		borders.

endmenu # Volume Configuration"
endif # NXWM_MEDIAPLAYER
endmenu # NxWM Media Player Display Settings
endif # NXWM
endmenu # NxWM