/**************************************************************************** * apps/system/nxlooper/nxlooper.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "system/nxlooper.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define NXLOOPER_STATE_IDLE 0 #define NXLOOPER_STATE_RECORDING 1 #define NXLOOPER_STATE_LOOPING 2 #define NXLOOPER_STATE_PAUSED 3 #define AUDIO_APB_RECORD (1 << 4) #define AUDIO_APB_PLAY (1 << 5) /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nxlooper_opendevice * * nxlooper_opendevice() either searches the Audio system for record and * playback devices and opens them, or tries to open the preferred devices * if specified. * * Return: * OK if compatible device opened (searched or preferred) * -ENODEV if no compatible device opened. * -ENOENT if preferred device couldn't be opened. * ****************************************************************************/ static int nxlooper_opendevice(FAR struct nxlooper_s *plooper) { #ifdef CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE /* If we have a preferred device, then open it */ if (plooper->playdev[0] != '\0' && plooper->recorddev[0] != '\0') { plooper->playdev_fd = open(plooper->playdev, O_RDWR | O_CLOEXEC); if (plooper->playdev_fd == -1) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: Failed to open plooper->playdev %d\n", -errcode); return -errcode; } plooper->recorddev_fd = open(plooper->recorddev, O_RDWR | O_CLOEXEC); if (plooper->recorddev_fd == -1) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: Failed to open plooper->recorddev %d\n", -errcode); close(plooper->playdev_fd); plooper->playdev_fd = -1; return -errcode; } return OK; } #endif /* CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE */ #if defined(CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE) && \ defined(CONFIG_NXLOOPER_INCLUDE_DEVICE_SEARCH) else #endif #ifdef CONFIG_NXLOOPER_INCLUDE_DEVICE_SEARCH { struct audio_caps_s caps; FAR struct dirent *pdevice; FAR DIR *dirp; char path[64]; /* Search for a device in the audio device directory */ #ifdef CONFIG_AUDIO_CUSTOM_DEV_PATH #ifdef CONFIG_AUDIO_DEV_ROOT dirp = opendir("/dev"); #else dirp = opendir(CONFIG_AUDIO_DEV_PATH); #endif /* CONFIG_AUDIO_DEV_ROOT */ #else dirp = opendir("/dev/audio"); #endif /* CONFIG_AUDIO_CUSTOM_DEV_PATH */ if (dirp == NULL) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: Failed to open /dev/audio: %d\n", -errcode); return -errcode; } while ((pdevice = readdir(dirp)) != NULL) { int dev_fd; /* We found the next device. Try to open it and * get its audio capabilities. */ #ifdef CONFIG_AUDIO_CUSTOM_DEV_PATH #ifdef CONFIG_AUDIO_DEV_ROOT snprintf(path, sizeof(path), "/dev/%s", pdevice->d_name); #else snprintf(path, sizeof(path), CONFIG_AUDIO_DEV_PATH "/%s", pdevice->d_name); #endif /* CONFIG_AUDIO_DEV_ROOT */ #else snprintf(path, sizeof(path), "/dev/audio/%s", pdevice->d_name); #endif /* CONFIG_AUDIO_CUSTOM_DEV_PATH */ if ((dev_fd = open(path, O_RDWR | O_CLOEXEC)) != -1) { /* We have the device file open. Now issue an AUDIO ioctls to * get the capabilities */ caps.ac_len = sizeof(caps); caps.ac_type = AUDIO_TYPE_QUERY; caps.ac_subtype = AUDIO_TYPE_QUERY; if (ioctl(dev_fd, AUDIOIOC_GETCAPS, (unsigned long)&caps) == caps.ac_len) { if ((plooper->playdev_fd == -1) && caps.ac_controls.b[0] & AUDIO_TYPE_OUTPUT) { plooper->playdev_fd = dev_fd; } else if ((plooper->recorddev_fd == -1) && caps.ac_controls.b[0] & AUDIO_TYPE_INPUT) { plooper->recorddev_fd = dev_fd; } else { close(dev_fd); } if (plooper->recorddev_fd != -1 && plooper->playdev_fd != -1) { closedir(dirp); return OK; } } else { close(dev_fd); } } } closedir(dirp); } /* Device not found */ auderr("ERROR: Device not found\n"); if (plooper->playdev_fd != -1) { close(plooper->playdev_fd); plooper->playdev_fd = -1; } if (plooper->recorddev_fd != -1) { close(plooper->recorddev_fd); plooper->recorddev_fd = -1; } #endif /* CONFIG_NXLOOPER_INCLUDE_DEVICE_SEARCH */ return -ENODEV; } /**************************************************************************** * Name: nxlooper_enqueuerecordbuffer * * Description: * Enqueue the audio buffer in the downstream device. Normally we are * called with a buffer of data to be enqueued in the audio stream. * * Be we may also receive an empty length buffer (with only the * AUDIO_APB_FINAL set) in the event of certain read error occurs or in the * event that the file was an exact multiple of the nmaxbytes size of the * audio buffer. In that latter case, we have an end of file with no bytes * read. * * These infrequent zero length buffers have to be passed through because * the include the AUDIO_APB_FINAL flag that is needed to terminate the * audio stream. * ****************************************************************************/ static int nxlooper_enqueuerecordbuffer(FAR struct nxlooper_s *plooper, FAR struct ap_buffer_s *apb) { struct audio_buf_desc_s bufdesc; int ret; /* Now enqueue the buffer with the audio device. */ apb->nbytes = apb->nmaxbytes; #ifdef CONFIG_AUDIO_MULTI_SESSION bufdesc.session = plooper->precordses; #endif bufdesc.numbytes = apb->nbytes; bufdesc.u.buffer = apb; apb->flags = AUDIO_APB_RECORD; ret = ioctl(plooper->recorddev_fd, AUDIOIOC_ENQUEUEBUFFER, (unsigned long)&bufdesc); if (ret < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: AUDIOIOC_ENQUEUEBUFFER ioctl failed: %d\n", errcode); return -errcode; } return OK; } static int nxlooper_enqueueplaybuffer(FAR struct nxlooper_s *plooper, FAR struct ap_buffer_s *apb) { struct audio_buf_desc_s bufdesc; int ret; /* Now enqueue the buffer with the audio device. */ #ifdef CONFIG_AUDIO_MULTI_SESSION bufdesc.session = plooper->pplayses; #endif bufdesc.numbytes = apb->nbytes; bufdesc.u.buffer = apb; apb->flags = AUDIO_APB_PLAY; ret = ioctl(plooper->playdev_fd, AUDIOIOC_ENQUEUEBUFFER, (unsigned long)&bufdesc); if (ret < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: AUDIOIOC_ENQUEUEBUFFER ioctl failed: %d\n", errcode); return -errcode; } return OK; } /**************************************************************************** * Name: nxlooper_thread_loopthread * * This is the thread that record the raw audio data and enqueues / * dequeues buffers from the selected and opened audio device. * ****************************************************************************/ static void *nxlooper_loopthread(pthread_addr_t pvarg) { FAR struct nxlooper_s *plooper = (FAR struct nxlooper_s *)pvarg; FAR struct ap_buffer_s *apb; FAR struct ap_buffer_s *apbtemp; struct dq_queue_s playdq; struct dq_queue_s recorddq; struct audio_msg_s msg; struct audio_buf_desc_s buf_desc; struct ap_buffer_info_s recordbuf_info; struct ap_buffer_info_s playbuf_info; FAR struct ap_buffer_s **playbufs; FAR struct ap_buffer_s **recordbufs; unsigned int prio; ssize_t size; bool running = true; int x; int ret; audinfo("Entry\n"); dq_init(&playdq); dq_init(&recorddq); /* Query the audio device for it's preferred buffer size / qty */ if ((ret = ioctl(plooper->recorddev_fd, AUDIOIOC_GETBUFFERINFO, (unsigned long)&recordbuf_info)) != OK) { /* Driver doesn't report it's buffer size. Use our default. */ recordbuf_info.buffer_size = CONFIG_AUDIO_BUFFER_NUMBYTES; recordbuf_info.nbuffers = CONFIG_AUDIO_NUM_BUFFERS; } /* Create array of pointers to buffers */ recordbufs = (FAR struct ap_buffer_s **) calloc(recordbuf_info.nbuffers, sizeof(FAR void *)); if (recordbufs == NULL) { /* Error allocating memory for buffer storage! */ ret = -ENOMEM; goto err_out; } /* Create our audio pipeline buffers to use for queueing up data */ for (x = 0; x < recordbuf_info.nbuffers; x++) { /* Fill in the buffer descriptor struct to issue an alloc request */ #ifdef CONFIG_AUDIO_MULTI_SESSION buf_desc.session = plooper->precordses; #endif buf_desc.numbytes = recordbuf_info.buffer_size; buf_desc.u.pbuffer = &recordbufs[x]; ret = ioctl(plooper->recorddev_fd, AUDIOIOC_ALLOCBUFFER, (unsigned long)&buf_desc); if (ret != sizeof(buf_desc)) { /* Buffer alloc Operation not supported or error allocating! */ auderr("ERROR: Could not allocate buffer %d\n", x); goto err_out; } } /* Fill up the pipeline with enqueued buffers */ for (x = 0; x < recordbuf_info.nbuffers; x++) { /* Write the next buffer of data */ ret = nxlooper_enqueuerecordbuffer(plooper, recordbufs[x]); if (ret != OK) { goto err_out; } } if ((ret = ioctl(plooper->playdev_fd, AUDIOIOC_GETBUFFERINFO, (unsigned long)&playbuf_info)) != OK) { /* Driver doesn't report it's buffer size. Use our default. */ playbuf_info.buffer_size = CONFIG_AUDIO_BUFFER_NUMBYTES; playbuf_info.nbuffers = CONFIG_AUDIO_NUM_BUFFERS; } playbufs = (FAR struct ap_buffer_s **) calloc(playbuf_info.nbuffers, sizeof(FAR void *)); if (playbufs == NULL) { /* Error allocating memory for buffer storage! */ ret = -ENOMEM; goto err_out; } /* Create our audio pipeline buffers to use for queueing up data */ for (x = 0; x < playbuf_info.nbuffers; x++) { /* Fill in the buffer descriptor struct to issue an alloc request */ #ifdef CONFIG_AUDIO_MULTI_SESSION buf_desc.session = plooper->pplayses; #endif buf_desc.numbytes = playbuf_info.buffer_size; buf_desc.u.pbuffer = &playbufs[x]; ret = ioctl(plooper->playdev_fd, AUDIOIOC_ALLOCBUFFER, (unsigned long)&buf_desc); if (ret != sizeof(buf_desc)) { /* Buffer alloc Operation not supported or error allocating! */ auderr("ERROR: Could not allocate buffer %d\n", x); goto err_out; } dq_addlast(&playbufs[x]->dq_entry, &playdq); } /* Start the audio device */ #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(plooper->recorddev_fd, AUDIOIOC_START, (unsigned long)plooper->precordses); #else ret = ioctl(plooper->recorddev_fd, AUDIOIOC_START, 0); #endif if (ret < 0) { goto err_out; } else { plooper->loopstate = NXLOOPER_STATE_RECORDING; } /* Loop until we specifically break. running == true means that we are * still looping waiting for the loopback to complete. All of the data * may have been sent, but the loopback is not complete until we get * AUDIO_MSG_STOP message * * The normal protocol for looping errors detected by the audio driver * is as follows: * * (1) The audio driver will indicated the error by returning a negated * error value when the next buffer is enqueued. The upper level * then knows that this buffer was not queue. * (2) The audio driver must return all queued buffers using the * AUDIO_MSG_DEQUEUE message. */ while (running) { size = mq_receive(plooper->mq, (FAR char *)&msg, sizeof(msg), &prio); /* Validate a message was received */ audinfo("message received size %zd id%d\n", size, msg.msg_id); if (size != sizeof(msg)) { /* Interrupted by a signal? What to do? */ continue; } /* Perform operation based on message id */ switch (msg.msg_id) { /* An audio buffer is being dequeued by the driver */ case AUDIO_MSG_DEQUEUE: apb = msg.u.ptr; if (apb->flags & AUDIO_APB_PLAY) { dq_addlast(&apb->dq_entry, &playdq); } else if (apb->flags & AUDIO_APB_RECORD) { dq_addlast(&apb->dq_entry, &recorddq); } if (dq_count(&playdq) != 0 && dq_count(&recorddq) != 0) { apbtemp = (struct ap_buffer_s *)dq_remfirst(&recorddq); apb = (struct ap_buffer_s *)dq_remfirst(&playdq); apb->nbytes = apbtemp->nbytes; memcpy(apb->samp, apbtemp->samp, apbtemp->nbytes); ret = nxlooper_enqueuerecordbuffer(plooper, apbtemp); if (ret == OK) { ret = nxlooper_enqueueplaybuffer(plooper, apb); if (ret == OK && plooper->loopstate == NXLOOPER_STATE_RECORDING) { #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(plooper->playdev_fd, AUDIOIOC_START, (unsigned long)plooper->pplayses); #else ret = ioctl(plooper->playdev_fd, AUDIOIOC_START, 0); #endif if (ret == OK) { plooper->loopstate = NXLOOPER_STATE_LOOPING; } } } } if (ret == OK) { /* Go through to AUDIO_MSG_STOP */ break; } /* Someone wants to stop the loopback. */ case AUDIO_MSG_STOP: /* Send a stop message to the device */ audinfo("Stopping looping\n"); #ifdef CONFIG_AUDIO_MULTI_SESSION ioctl(plooper->playdev_fd, AUDIOIOC_STOP, (unsigned long)plooper->pplayses); ioctl(plooper->recorddev_fd, AUDIOIOC_STOP, (unsigned long)plooper->precordses); #else ioctl(plooper->playdev_fd, AUDIOIOC_STOP, 0); ioctl(plooper->recorddev_fd, AUDIOIOC_STOP, 0); #endif running = false; break; /* Unknown / unsupported message ID */ default: break; } } /* Release our audio buffers and unregister / release the device */ err_out: audinfo("Clean-up and exit\n"); if (playbufs != NULL) { audinfo("Freeing play buffers\n"); for (x = 0; x < playbuf_info.nbuffers; x++) { /* Fill in the buffer descriptor struct to issue a free request */ if (playbufs[x] != NULL) { #ifdef CONFIG_AUDIO_MULTI_SESSION buf_desc.session = plooper->pplayses; #endif buf_desc.u.buffer = playbufs[x]; ioctl(plooper->playdev_fd, AUDIOIOC_FREEBUFFER, (unsigned long)&buf_desc); } } /* Free the pointers to the buffers */ free(playbufs); } if (recordbufs != NULL) { audinfo("Freeing record buffers\n"); for (x = 0; x < recordbuf_info.nbuffers; x++) { /* Fill in the buffer descriptor struct to issue a free request */ if (recordbufs[x] != NULL) { #ifdef CONFIG_AUDIO_MULTI_SESSION buf_desc.session = plooper->precordses; #endif buf_desc.u.buffer = recordbufs[x]; ioctl(plooper->recorddev_fd, AUDIOIOC_FREEBUFFER, (unsigned long)&buf_desc); } } /* Free the pointers to the buffers */ free(recordbufs); } /* Unregister the message queue and release the session */ ioctl(plooper->playdev_fd, AUDIOIOC_UNREGISTERMQ, (unsigned long)plooper->mq); ioctl(plooper->recorddev_fd, AUDIOIOC_UNREGISTERMQ, (unsigned long)plooper->mq); #ifdef CONFIG_AUDIO_MULTI_SESSION ioctl(plooper->playdev_fd, AUDIOIOC_RELEASE, (unsigned long)plooper->pplayses); ioctl(plooper->recorddev_fd, AUDIOIOC_RELEASE, (unsigned long)plooper->precordses); #else ioctl(plooper->playdev_fd, AUDIOIOC_RELEASE, 0); ioctl(plooper->recorddev_fd, AUDIOIOC_RELEASE, 0); #endif /* Cleanup */ while (sem_wait(&plooper->sem) < 0) { } close(plooper->playdev_fd); /* Close the play device */ close(plooper->recorddev_fd); /* Close the record device */ plooper->playdev_fd = -1; /* Mark play device as closed */ plooper->recorddev_fd = -1; /* Mark record device as closed */ mq_close(plooper->mq); /* Close the message queue */ mq_unlink(plooper->mqname); /* Unlink the message queue */ plooper->loopstate = NXLOOPER_STATE_IDLE; sem_post(&plooper->sem); /* Release the semaphore */ audinfo("Exit\n"); return NULL; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxlooper_setvolume * * nxlooper_setvolume() sets the volume. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME int nxlooper_setvolume(FAR struct nxlooper_s *plooper, uint16_t volume) { struct audio_caps_desc_s cap_desc; int ret; /* Thread sync using the semaphore */ while (sem_wait(&plooper->sem) < 0) ; /* If we are currently looping, then we need to post a message to * the loopthread to perform the volume change operation. If we * are not looping, then just store the volume setting and it will * be applied before the next loopback begins. */ if (plooper->loopstate == NXLOOPER_STATE_LOOPING) { /* Send a CONFIGURE ioctl to the device to set the volume */ #ifdef CONFIG_AUDIO_MULTI_SESSION cap_desc.session = plooper->pplayses; #endif cap_desc.caps.ac_len = sizeof(struct audio_caps_s); cap_desc.caps.ac_type = AUDIO_TYPE_FEATURE; cap_desc.caps.ac_format.hw = AUDIO_FU_VOLUME; cap_desc.caps.ac_controls.hw[0] = volume; ret = ioctl(plooper->playdev_fd, AUDIOIOC_CONFIGURE, (unsigned long)&cap_desc); if (ret < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); auderr("ERROR: AUDIOIOC_CONFIGURE ioctl failed: %d\n", errcode); sem_post(&plooper->sem); return -errcode; } } /* Store the volume setting */ plooper->volume = volume; sem_post(&plooper->sem); return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_VOLUME */ /**************************************************************************** * Name: nxlooper_pause * * nxlooper_pause() pauses loopback without cancelling it. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME int nxlooper_pause(FAR struct nxlooper_s *plooper) { int ret = OK; if (plooper->loopstate == NXLOOPER_STATE_LOOPING) { #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(plooper->playdev_fd, AUDIOIOC_PAUSE, (unsigned long)plooper->pplayses); if (ret == OK) { ret = ioctl(plooper->recorddev_fd, AUDIOIOC_PAUSE, (unsigned long)plooper->precordses); } #else ret = ioctl(plooper->playdev_fd, AUDIOIOC_PAUSE, 0); if (ret == OK) { ret = ioctl(plooper->recorddev_fd, AUDIOIOC_PAUSE, 0); } #endif if (ret == OK) { plooper->loopstate = NXLOOPER_STATE_PAUSED; } } return ret; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: nxlooper_resume * * nxlooper_resume() resumes loopback after a pause operation. * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME int nxlooper_resume(FAR struct nxlooper_s *plooper) { int ret = OK; if (plooper->loopstate == NXLOOPER_STATE_PAUSED) { #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(plooper->recorddev_fd, AUDIOIOC_RESUME, (unsigned long)plooper->pplayses); if (ret == OK) { ret = ioctl(plooper->playdev_fd, AUDIOIOC_RESUME, (unsigned long)plooper->precordses); } #else ret = ioctl(plooper->recorddev_fd, AUDIOIOC_RESUME, 0); if (ret == OK) { ret = ioctl(plooper->playdev_fd, AUDIOIOC_RESUME, 0); } #endif if (ret == OK) { plooper->loopstate = NXLOOPER_STATE_LOOPING; } } return ret; } #endif /* CONFIG_AUDIO_EXCLUDE_PAUSE_RESUME */ /**************************************************************************** * Name: nxlooper_setdevice * * nxlooper_setdevice() sets the preferred audio device to use with the * provided nxlooper context. * ****************************************************************************/ #ifdef CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE int nxlooper_setdevice(FAR struct nxlooper_s *plooper, FAR const char *pdevice) { int temp_fd; struct audio_caps_s caps; DEBUGASSERT(plooper != NULL); DEBUGASSERT(pdevice != NULL); /* Try to open the device */ temp_fd = open(pdevice, O_RDWR); if (temp_fd == -1) { /* Error opening the device */ return -ENOENT; } /* Validate it's an Audio device by issuing an AUDIOIOC_GETCAPS ioctl */ caps.ac_len = sizeof(caps); caps.ac_type = AUDIO_TYPE_QUERY; caps.ac_subtype = AUDIO_TYPE_QUERY; if (ioctl(temp_fd, AUDIOIOC_GETCAPS, (unsigned long)&caps) != caps.ac_len) { /* Not an Audio device! */ close(temp_fd); return -ENODEV; } /* Close the file */ close(temp_fd); /* Save the path of the preferred device */ if (caps.ac_controls.b[0] & AUDIO_TYPE_OUTPUT) { strncpy(plooper->playdev, pdevice, sizeof(plooper->playdev)); } else if (caps.ac_controls.b[0] & AUDIO_TYPE_INPUT) { strncpy(plooper->recorddev, pdevice, sizeof(plooper->playdev)); } return OK; } #endif /* CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE */ /**************************************************************************** * Name: nxlooper_stop * * nxlooper_stop() stops the current playback to loop and closes the * file and the associated device. * * Input: * plooper Pointer to the initialized looper context * ****************************************************************************/ #ifndef CONFIG_AUDIO_EXCLUDE_STOP int nxlooper_stop(FAR struct nxlooper_s *plooper) { struct audio_msg_s term_msg; FAR void *value; DEBUGASSERT(plooper != NULL); /* Validate we are not in IDLE state */ sem_wait(&plooper->sem); /* Get the semaphore */ if (plooper->loopstate == NXLOOPER_STATE_IDLE) { sem_post(&plooper->sem); /* Release the semaphore */ return OK; } sem_post(&plooper->sem); /* Notify the loopback thread that it needs to cancel the loopback */ term_msg.msg_id = AUDIO_MSG_STOP; term_msg.u.data = 0; mq_send(plooper->mq, (FAR const char *)&term_msg, sizeof(term_msg), CONFIG_NXLOOPER_MSG_PRIO); /* Join the thread. The thread will do all the cleanup. */ pthread_join(plooper->loop_id, &value); plooper->loop_id = 0; return OK; } #endif /* CONFIG_AUDIO_EXCLUDE_STOP */ /**************************************************************************** * Name: nxlooper_loopraw * * nxlooper_loopraw() tries to record and then play the raw data using the * Audio system. If a device is specified, it will try to use that * device. * Input: * plooper Pointer to the initialized Looper context * nchannels channel num * bpsampe bit width * samprate sample rate * chmap channel map * * Returns: * OK File is being looped * -EBUSY The media device is busy * -ENOSYS The media file is an unsupported type * -ENODEV No audio device suitable * -ENOENT The media file was not found * ****************************************************************************/ int nxlooper_loopraw(FAR struct nxlooper_s *plooper, uint8_t nchannels, uint8_t bpsamp, uint32_t samprate, uint8_t chmap) { struct mq_attr attr; struct sched_param sparam; pthread_attr_t tattr; struct audio_caps_desc_s cap_desc; struct ap_buffer_info_s buf_info; FAR void *value; int ret; DEBUGASSERT(plooper != NULL); if (plooper->loopstate != NXLOOPER_STATE_IDLE) { return -EBUSY; } audinfo("==============================\n"); audinfo("loopback raw data\n"); audinfo("==============================\n"); /* Try to open the device */ ret = nxlooper_opendevice(plooper); if (ret < 0) { /* Error opening the device */ auderr("ERROR: nxlooper_opendevice failed: %d\n", ret); return ret; } /* Try to reserve record device */ #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(plooper->recorddev_fd, AUDIOIOC_RESERVE, (unsigned long)&plooper->precordses); #else ret = ioctl(plooper->recorddev_fd, AUDIOIOC_RESERVE, 0); #endif if (ret < 0) { /* Device is busy or error */ auderr("ERROR: Failed to reserve record device: %d\n", ret); ret = -errno; goto err_out_dev; } #ifdef CONFIG_AUDIO_MULTI_SESSION ret = ioctl(plooper->playdev_fd, AUDIOIOC_RESERVE, (unsigned long)&plooper->pplayses); #else ret = ioctl(plooper->playdev_fd, AUDIOIOC_RESERVE, 0); #endif if (ret < 0) { /* Device is busy or error */ auderr("ERROR: Failed to reserve play device: %d\n", ret); ret = -errno; goto err_out_record; } #ifdef CONFIG_AUDIO_MULTI_SESSION cap_desc.session = plooper->precordses; #endif cap_desc.caps.ac_len = sizeof(struct audio_caps_s); cap_desc.caps.ac_type = AUDIO_TYPE_INPUT; cap_desc.caps.ac_channels = nchannels ? nchannels : 2; cap_desc.caps.ac_chmap = chmap ? chmap : 3; cap_desc.caps.ac_controls.hw[0] = samprate ? samprate : 48000; cap_desc.caps.ac_controls.b[3] = samprate >> 16; cap_desc.caps.ac_controls.b[2] = bpsamp ? bpsamp : 16; ret = ioctl(plooper->recorddev_fd, AUDIOIOC_CONFIGURE, (unsigned long)&cap_desc); if (ret < 0) { ret = -errno; goto err_out; } #ifdef CONFIG_AUDIO_MULTI_SESSION cap_desc.session = plooper->pplayses; #endif cap_desc.caps.ac_type = AUDIO_TYPE_OUTPUT; ret = ioctl(plooper->playdev_fd, AUDIOIOC_CONFIGURE, (unsigned long)&cap_desc); if (ret < 0) { ret = -errno; goto err_out; } /* Query the audio device for its preferred buffer size / qty */ if ((ioctl(plooper->playdev_fd, AUDIOIOC_GETBUFFERINFO, (unsigned long)&buf_info)) != OK) { /* Driver doesn't report its buffer size. Use our default. */ buf_info.nbuffers = CONFIG_AUDIO_NUM_BUFFERS; } /* Create a message queue for the loopthread */ attr.mq_maxmsg = buf_info.nbuffers + 8; attr.mq_msgsize = sizeof(struct audio_msg_s); attr.mq_curmsgs = 0; attr.mq_flags = 0; snprintf(plooper->mqname, sizeof(plooper->mqname), "/tmp/%0lx", (unsigned long)((uintptr_t)plooper)); plooper->mq = mq_open(plooper->mqname, O_RDWR | O_CREAT, 0644, &attr); if (plooper->mq == (mqd_t) -1) { /* Unable to open message queue! */ ret = -errno; auderr("ERROR: mq_open failed: %d\n", ret); goto err_out; } /* Register our message queue with the audio device */ ioctl(plooper->recorddev_fd, AUDIOIOC_REGISTERMQ, (unsigned long)plooper->mq); ioctl(plooper->playdev_fd, AUDIOIOC_REGISTERMQ, (unsigned long)plooper->mq); /* Check if there was a previous thread and join it if there was * to perform clean-up. */ if (plooper->loop_id != 0) { pthread_join(plooper->loop_id, &value); } pthread_attr_init(&tattr); sparam.sched_priority = sched_get_priority_max(SCHED_FIFO) - 9; pthread_attr_setschedparam(&tattr, &sparam); pthread_attr_setstacksize(&tattr, CONFIG_NXLOOPER_LOOPTHREAD_STACKSIZE); /* Add a reference count to the looper for the thread and start the * thread. We increment for the thread to avoid thread start-up * race conditions. */ nxlooper_reference(plooper); ret = pthread_create(&plooper->loop_id, &tattr, nxlooper_loopthread, (pthread_addr_t)plooper); pthread_attr_destroy(&tattr); if (ret != OK) { ret = -ret; auderr("ERROR: Failed to create loopthread: %d\n", ret); goto err_out; } /* Name the thread */ pthread_setname_np(plooper->loop_id, "loopthread"); return OK; err_out: #ifdef CONFIG_AUDIO_MULTI_SESSION ioctl(plooper->playdev_fd, AUDIOIOC_RELEASE, (unsigned long)plooper->pplayses); #else ioctl(plooper->playdev_fd, AUDIOIOC_RELEASE, 0); #endif err_out_record: #ifdef CONFIG_AUDIO_MULTI_SESSION ioctl(plooper->recorddev_fd, AUDIOIOC_RELEASE, (unsigned long)plooper->precordses); #else ioctl(plooper->recorddev_fd, AUDIOIOC_RELEASE, 0); #endif err_out_dev: close(plooper->playdev_fd); plooper->playdev_fd = -1; close(plooper->recorddev_fd); plooper->recorddev_fd = -1; return ret; } /**************************************************************************** * Name: nxlooper_create * * nxlooper_create() allocates and initializes a nxlooper context for * use by further nxlooper operations. This routine must be called before * to perform the create for proper reference counting. * * Input Parameters: None * * Returned values: * Pointer to the created context or NULL if there was an error. * ****************************************************************************/ FAR struct nxlooper_s *nxlooper_create(void) { FAR struct nxlooper_s *plooper; /* Allocate the memory */ plooper = (FAR struct nxlooper_s *)malloc(sizeof(struct nxlooper_s)); if (plooper == NULL) { return NULL; } /* Initialize the context data */ plooper->loopstate = NXLOOPER_STATE_IDLE; plooper->playdev_fd = -1; plooper->recorddev_fd = -1; #ifdef CONFIG_NXLOOPER_INCLUDE_PREFERRED_DEVICE plooper->playdev[0] = '\0'; plooper->recorddev[0] = '\0'; #endif plooper->mq = 0; plooper->loop_id = 0; plooper->crefs = 1; #ifndef CONFIG_AUDIO_EXCLUDE_VOLUME plooper->volume = 400; #endif #ifdef CONFIG_AUDIO_MULTI_SESSION plooper->pplayses = NULL; plooper->precordses = NULL; #endif sem_init(&plooper->sem, 0, 1); return plooper; } /**************************************************************************** * Name: nxlooper_release * * nxlooper_release() reduces the reference count by one and if it * reaches zero, frees the context. * * Input Parameters: * plooper Pointer to the NxLooper context * * Returned values: None * ****************************************************************************/ void nxlooper_release(FAR struct nxlooper_s *plooper) { int refcount; FAR void *value; /* Grab the semaphore */ while (sem_wait(&plooper->sem) < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); if (errcode != EINTR) { auderr("ERROR: sem_wait failed: %d\n", errcode); return; } } /* Check if there was a previous thread and join it if there was */ if (plooper->loop_id != 0) { sem_post(&plooper->sem); pthread_join(plooper->loop_id, &value); plooper->loop_id = 0; while (sem_wait(&plooper->sem) < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); if (errcode != EINTR) { auderr("ERROR: sem_wait failed: %d\n", errcode); return; } } } /* Reduce the reference count */ refcount = plooper->crefs--; sem_post(&plooper->sem); /* If the ref count *was* one, then free the context */ if (refcount == 1) { free(plooper); } } /**************************************************************************** * Name: nxlooper_reference * * nxlooper_reference() increments the reference count by one. * * Input Parameters: * plooper Pointer to the NxLooper context * * Returned values: None * ****************************************************************************/ void nxlooper_reference(FAR struct nxlooper_s *plooper) { /* Grab the semaphore */ while (sem_wait(&plooper->sem) < 0) { int errcode = errno; DEBUGASSERT(errcode > 0); if (errcode != EINTR) { auderr("ERROR: sem_wait failed: %d\n", errcode); return; } } /* Increment the reference count */ plooper->crefs++; sem_post(&plooper->sem); } /**************************************************************************** * Name: nxlooper_systemreset * * nxlooper_systemreset() performs a HW reset on all registered * audio devices. * ****************************************************************************/ #ifdef CONFIG_NXLOOPER_INCLUDE_SYSTEM_RESET int nxlooper_systemreset(FAR struct nxlooper_s *plooper) { struct audio_caps_s caps; FAR struct dirent *pdevice; FAR DIR *dirp; char path[64]; int temp_fd; /* Search for a device in the audio device directory */ #ifdef CONFIG_AUDIO_CUSTOM_DEV_PATH #ifdef CONFIG_AUDIO_DEV_ROOT dirp = opendir("/dev"); #else dirp = opendir(CONFIG_AUDIO_DEV_PATH); #endif #else dirp = opendir("/dev/audio"); #endif if (dirp == NULL) { return -ENODEV; } caps.ac_len = sizeof(caps); caps.ac_type = AUDIO_TYPE_QUERY; caps.ac_subtype = AUDIO_TYPE_QUERY; while ((pdevice = readdir(dirp)) != NULL) { /* We found the next device. Try to open it and * get its audio capabilities. */ #ifdef CONFIG_AUDIO_CUSTOM_DEV_PATH #ifdef CONFIG_AUDIO_DEV_ROOT snprintf(path, sizeof(path), "/dev/%s", pdevice->d_name); #else snprintf(path, sizeof(path), CONFIG_AUDIO_DEV_PATH "/%s", pdevice->d_name); #endif #else snprintf(path, sizeof(path), "/dev/audio/%s", pdevice->d_name); #endif if ((temp_fd = open(path, O_RDWR)) != -1) { /* Validate it's an Audio device by issuing an * AUDIOIOC_GETCAPS ioctl */ if (ioctl(temp_fd, AUDIOIOC_GETCAPS, (unsigned long)&caps) == caps.ac_len) { /* We have the device file open. Now issue an * AUDIO ioctls to perform a HW reset */ ioctl(temp_fd, AUDIOIOC_HWRESET, 0); } /* Now close the device */ close(temp_fd); } } return OK; } #endif /* CONFIG_NXLOOPER_INCLUDE_SYSTEM_RESET */