/**************************************************************************** * apps/fsutils/mkfatfs/fat32.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __APPS_FSUTILS_MKFATFS_FAT32_H #define __APPS_FSUTILS_MKFATFS_FAT32_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * These offsets describes the master boot record (MBR). * * The following fields are common to FAT12/16/32 (but all value descriptions * refer to the interpretation under FAT32). */ #define MBR_JUMP 0 /* 3@0: Jump instruction to boot code (ignored) */ #define MBR_OEMNAME 3 /* 8@3: Usually "MSWIN4.1" */ #define MBR_BYTESPERSEC 11 /* 2@11: Bytes per sector: 512, 1024, 2048, 4096 */ #define MBR_SECPERCLUS 13 /* 1@13: Sectors per allocation unit: 2**n, n=0..7 */ #define MBR_RESVDSECCOUNT 14 /* 2@14: Reserved sector count: Usually 32 */ #define MBR_NUMFATS 16 /* 1@16: Number of FAT data structures: always 2 */ #define MBR_ROOTENTCNT 17 /* 2@17: FAT12/16: Must be 0 for FAT32 */ #define MBR_TOTSEC16 19 /* 2@19: FAT12/16: Must be 0, see MBR_TOTSEC32 */ #define MBR_MEDIA 21 /* 1@21: Media code: f0, f8, f9-fa, fc-ff */ #define MBR_FATSZ16 22 /* 2@22: FAT12/16: Must be 0, see MBR_FATSZ32 */ #define MBR_SECPERTRK 24 /* 2@24: Sectors per track geometry value */ #define MBR_NUMHEADS 26 /* 2@26: Number of heads geometry value */ #define MBR_HIDSEC 28 /* 4@28: Count of hidden sectors preceding FAT */ #define MBR_TOTSEC32 32 /* 4@32: Total count of sectors on the volume */ /* The following fields are only valid for FAT12/16 */ #define MBR16_DRVNUM 36 /* 1@36: Drive number for MSDOS bootstrap */ /* 1@37: Reserved (zero) */ #define MBR16_BOOTSIG 38 /* 1@38: Extended boot signature: 0x29 if following valid */ #define MBR16_VOLID 39 /* 4@39: Volume serial number */ #define MBR16_VOLLAB 43 /* 11@43: Volume label */ #define MBR16_FILESYSTYPE 54 /* 8@54: "FAT12 ", "FAT16 ", or "FAT " */ #define MBR16_BOOTCODE 62 /* Boot code may be placed in the remainder of the sector */ #define MBR16_BOOTCODESIZE 448 /* The following fields are only valid for FAT32 */ #define MBR32_FATSZ32 36 /* 4@36: Count of sectors occupied by one FAT */ #define MBR32_EXTFLAGS 40 /* 2@40: 0-3:Active FAT, 7=0 both FATS, 7=1 one FAT */ #define MBR32_FSVER 42 /* 2@42: MSB:Major LSB:Minor revision number (0.0) */ #define MBR32_ROOTCLUS 44 /* 4@44: Cluster no. of 1st cluster of root dir */ #define MBR32_FSINFO 48 /* 2@48: Sector number of fsinfo structure. Usually 1. */ #define MBR32_BKBOOTSEC 50 /* 2@50: Sector number of boot record. Usually 6 */ /* 12@52: Reserved (zero) */ #define MBR32_DRVNUM 64 /* 1@64: Drive number for MSDOS bootstrap */ /* 1@65: Reserved (zero) */ #define MBR32_BOOTSIG 66 /* 1@66: Extended boot signature: 0x29 if following valid */ #define MBR32_VOLID 67 /* 4@67: Volume serial number */ #define MBR32_VOLLAB 71 /* 11@71: Volume label */ #define MBR32_FILESYSTYPE 82 /* 8@82: "FAT12 ", "FAT16 ", or "FAT " */ #define MBR32_BOOTCODE 90 /* Boot code may be placed in the remainder of the sector */ #define MBR32_BOOTCODESIZE 420 /* If the sector is not an MBR, then it could have a partition table at * this offset. */ #define MBR_TABLE 446 /* The magic bytes at the end of the MBR are common to FAT12/16/32 */ #define MBR_SIGNATURE 510 /* 2@510: Valid MBRs have 0x55aa here */ #define BOOT_SIGNATURE16 0xaa55 #define BOOT_SIGNATURE32 0xaa550000 /* The extended boot signature (BS16/32_BOOTSIG) */ #define EXTBOOT_SIGNATURE 0x29 /* These offsets describes the partition table. * 446@0: Generally unused and zero; but may include IDM Boot Manager menu * entry at 8@394 */ /* n = 0,1,2,3 */ #define PART_ENTRY(n) (446+((n) << 4)) #define PART_ENTRY1 446 /* 16@446: Partition table, first entry */ #define PART_ENTRY2 462 /* 16@462: Partition table, second entry */ #define PART_ENTRY3 478 /* 16@478: Partition table, third entry */ #define PART_ENTRY4 494 /* 16@494: Partition table, fourth entry */ #define PART_SIGNATURE 510 /* 2@510: Valid partitions have 0x55aa here */ /**************************************************************************** * These offsets describes one partition table entry. NOTE that ent entries * are aligned to 16-bit offsets so that the STARTSECTOR and SIZE values are * not properly aligned. */ #define PART_BOOTINDICATOR 0 /* 1@0: Boot indicator (0x80: active;0x00:otherwise) */ #define PART_STARTCHS 1 /* 3@1: Starting Cylinder/Head/Sector values */ #define PART_TYPE 4 /* 1@4: Partition type description */ #define PART_ENDCHS 5 /* 3@5: Ending Cylinder/Head/Sector values */ #define PART_STARTSECTOR 8 /* 4@8: Starting sector */ #define PART_SIZE 12 /* 4@12: Partition size (in sectors) */ /**************************************************************************** * Partition table types. */ #define PART_TYPE_NONE 0 /* No partition */ #define PART_TYPE_FAT12 1 /* FAT12 */ #define PART_TYPE_FAT16A 4 /* FAT16 (Partition smaller than 32MB) */ #define PART_TYPE_EXT 5 /* Extended MS-DOS Partition */ #define PART_TYPE_FAT16B 6 /* FAT16 (Partition larger than 32MB) */ #define PART_TYPE_FAT32 11 /* FAT32 (Partition up to 2048Gb) */ #define PART_TYPE_FAT32X 12 /* Same as 11, but uses LBA1 0x13 extensions */ #define PART_TYPE_FAT16X 14 /* Same as 6, but uses LBA1 0x13 extensions */ #define PART_TYPE_EXTX 15 /* Same as 5, but uses LBA1 0x13 extensions */ /**************************************************************************** * Fat Boot Record (FBR). * * The FBR is always the very first sector in the partition. Validity check * is performed by comparing the 16 bit word at offset 1FE to AA55. The * structure of the FBR is shown below. * * NOTE that the fields of the FBR are equivalent to the MBR. */ #define FBR_OEMNAME 3 /* 8@3: Usually "MSWIN4.1" */ #define FBR_BYTESPERSEC 11 /* 2@11: Bytes per sector: 512, 1024, 2048, 4096 */ #define FBR_SECPERCLUS 13 /* 1@13: Sectors per allocation unit: 2**n, n=0..7 */ #define FBR_RESVDSECCOUNT 14 /* 2@14: Reserved sector count: Usually 32 */ #define FBR_NUMFATS 16 /* 1@16: Number of FAT data structures: always 2 */ #define FBR_ROOTENTCNT 17 /* 2@17: FAT12/16: Must be 0 for FAT32 */ #define FBR_TOTSEC16 19 /* 2@19: FAT12/16: Must be 0, see FBR_TOTSEC32 */ #define FBR_MEDIA 21 /* 1@21: Media code: f0, f8, f9-fa, fc-ff */ #define FBR_FATSZ16 22 /* 2@22: FAT12/16: Must be 0, see FBR_FATSZ32 */ #define FBR_SECPERTRK 24 /* 2@24: Sectors per track geometry value */ #define FBR_NUMHEADS 26 /* 2@26: Number of heads geometry value */ #define FBR_HIDSEC 28 /* 4@28: Count of hidden sectors preceding FAT */ #define FBR_TOTSEC32 32 /* 4@32: Total count of sectors on the volume */ #define FBR_FATSZ32 36 /* 4@36: Count of sectors occupied by one FAT (FAT32) */ #define FBR_EXTFLAGS 40 /* 2@40: Ext Flags */ #define FBR_FSVER 42 /* 2@42: FS Version */ #define FBR_ROOTCLUS 44 /* 4@44: Cluster no. of 1st cluster of root dir */ #define FBR_FSINFO 48 /* 2@48: FS Info Sector */ #define FBR_BKBOOTSEC 50 /* 2@50: Sector number of boot record. Usually 6 */ /* 52-301 Reserved */ /* The following fields are only valid for FAT12/16 */ #define FBR16_DRVNUM 36 /* 1@36: Drive number for MSDOS bootstrap */ /* 1@37: Reserved (zero) */ #define FBR16_BOOTSIG 38 /* 1@38: Extended boot signature: 0x29 if following valid */ #define FBR16_VOLID 39 /* 4@39: Volume serial number */ #define FBR16_VOLLAB 43 /* 11@43: Volume label */ #define FBR16_FILESYSTYPE 54 /* 8@54: "FAT12 ", "FAT16 ", or "FAT " */ /* The following fields are only valid for FAT32 */ #define FBR32_DRVNUM 64 /* 1@64: Drive number for MSDOS bootstrap */ #define FBR32_BOOTSIG 65 /* 1@65: Extended boot signature: 0x29 if following valid */ #define FBR32_VOLID 66 /* 4@66: Volume serial number */ #define FBR32_VOLLAB 71 /* 11@71: Volume label */ #define FBR32_FILESYSTYPE 82 /* 8@62: "FAT12 ", "FAT16 ", or "FAT " */ /* The magic bytes at the end of the MBR are common to FAT12/16/32 */ #define FBR_SIGNATURE 510 /* 2@510: Valid MBRs have 0x55aa here */ /**************************************************************************** * Each FAT "short" 8.3 file name directory entry is 32-bytes long. * * Sizes and limits */ /**************************************************************************** * Each FAT "short" 8.3 file name directory entry is 32-bytes long. * * Sizes and limits */ #define DIR_MAXFNAME 11 /* Max short name size is 8+3 = 11 */ /* The following define offsets relative to the beginning of a directory * entry. */ #define DIR_NAME 0 /* 11@ 0: NAME: 8 bytes + 3 byte extension */ #define DIR_ATTRIBUTES 11 /* 1@11: File attributes (see below) */ #define DIR_NTRES 12 /* 1@12: Reserved for use by NT */ #define DIR_CRTTIMETENTH 13 /* 1@13: Tenth sec creation timestamp */ #define DIR_CRTIME 14 /* 2@14: Time file created */ #define DIR_CRDATE 16 /* 2@16: Date file created */ #define DIR_LASTACCDATE 18 /* 2@19: Last access date */ #define DIR_FSTCLUSTHI 20 /* 2@20: MS first cluster number */ #define DIR_WRTTIME 22 /* 2@22: Time of last write */ #define DIR_WRTDATE 24 /* 2@24: Date of last write */ #define DIR_FSTCLUSTLO 26 /* 2@26: LS first cluster number */ #define DIR_FILESIZE 28 /* 4@28: File size in bytes */ #define DIR_SIZE 32 /* The size of one directory entry */ #define DIR_SHIFT 5 /* log2 of DIR_SIZE */ /* First byte of the directory name has special meanings: */ #define DIR0_EMPTY 0xe5 /* The directory entry is empty */ #define DIR0_ALLEMPTY 0x00 /* This entry and all following are empty */ #define DIR0_E5 0x05 /* The actual value is 0xe5 */ /* NTRES flags in the FAT directory */ #define FATNTRES_LCNAME 0x08 /* Lower case in name */ #define FATNTRES_LCEXT 0x10 /* Lower case in extension */ /* Directory indexing helper. Each directory entry is 32-bytes in length. * The number of directory entries in a sector then varies with the size * of the sector supported in hardware. */ #define DIRSEC_NDXMASK(f) (((f)->fs_hwsectorsize - 1) >> 5) #define DIRSEC_NDIRS(f) (((f)->fs_hwsectorsize) >> 5) #define DIRSEC_BYTENDX(f,i) (((i) & DIRSEC_NDXMASK(fs)) << 5) #define SEC_NDXMASK(f) ((f)->fs_hwsectorsize - 1) #define SEC_NSECTORS(f,n) ((n) / (f)->fs_hwsectorsize) #define CLUS_NDXMASK(f) ((f)->fs_fatsecperclus - 1) /* The FAT "long" file name (LFN) directory entry */ #ifdef CONFIG_FAT_LFN /* Sizes and limits */ # ifndef CONFIG_FAT_MAXFNAME /* The maximum support filename can be limited */ # define LDIR_MAXFNAME 255 /* Max unicode characters in file name */ # elif CONFIG_FAT_MAXFNAME <= 255 # define LDIR_MAXFNAME CONFIG_FAT_MAXFNAME # else # error "Illegal value for CONFIG_FAT_MAXFNAME" # endif # define LDIR_MAXLFNCHARS 13 /* Max unicode characters in one LFN entry */ # define LDIR_MAXLFNS 20 /* Max number of LFN entries */ /* LFN directory entry offsets */ # define LDIR_SEQ 0 /* 1@ 0: Sequence number */ # define LDIR_WCHAR1_5 1 /* 10@ 1: File name characters 1-5 (5 Unicode characters) */ # define LDIR_ATTRIBUTES 11 /* 1@11: File attributes (always 0x0f) */ # define LDIR_NTRES 12 /* 1@12: Reserved for use by NT (always 0x00) */ # define LDIR_CHECKSUM 13 /* 1@13: Checksum of the DOS filename */ # define LDIR_WCHAR6_11 14 /* 12@14: File name characters 6-11 (6 Unicode characters) */ # define LDIR_FSTCLUSTLO 26 /* 2@26: First cluster (always 0x0000) */ # define LDIR_WCHAR12_13 28 /* 4@28: File name characters 12-13 (2 Unicode characters) */ /* LFN sequence number and allocation status */ # define LDIR0_EMPTY DIR0_EMPTY /* The directory entry is empty */ # define LDIR0_ALLEMPTY DIR0_ALLEMPTY /* This entry and all following are empty */ # define LDIR0_E5 DIR0_E5 /* The actual value is 0xe5 */ # define LDIR0_LAST 0x40 /* Last LFN in file name (appears first) */ # define LDIR0_SEQ_MASK 0x1f /* Mask for sequence number (1-20) */ /* The LFN entry attribute */ # define LDDIR_LFNATTR 0x0f #endif /* File system types */ #define FSTYPE_FAT12 0 #define FSTYPE_FAT16 1 #define FSTYPE_FAT32 2 /* File buffer flags (ff_bflags) */ #define FFBUFF_VALID 1 #define FFBUFF_DIRTY 2 #define FFBUFF_MODIFIED 4 /* Mount status flags (ff_bflags) */ #define UMOUNT_FORCED 8 /**************************************************************************** * These offset describe the FSINFO sector */ #define FSI_LEADSIG 0 /* 4@0: 0x41615252 = "RRaA" */ /* 480@4: Reserved (zero) */ #define FSI_STRUCTSIG 484 /* 4@484: 0x61417272 = "rrAa" */ #define FSI_FREECOUNT 488 /* 4@488: Last free cluster count on volume */ #define FSI_NXTFREE 492 /* 4@492: Cluster number of 1st free cluster */ /* 12@496: Reserved (zero) */ #define FSI_TRAILSIG 508 /* 4@508: 0xaa550000 */ /**************************************************************************** * FAT values */ #define FAT_EOF 0x0ffffff8 #define FAT_BAD 0x0ffffff7 /**************************************************************************** * Maximum cluster by FAT type. This is the key value used to distinguish * between FAT12, 16, and 32. */ /* FAT12: For M$, the calculation is ((1 << 12) - 19). But we will follow * the Linux tradition of allowing slightly more clusters for FAT12. */ #define FAT_MAXCLUST12 ((1 << 12) - 16) /* FAT16: For M$, the calculation is ((1 << 16) - 19). (The uint32_t cast is * needed for architectures where int is only 16 bits). */ #define FAT_MINCLUST16 (FAT_MAXCLUST12 + 1) #define FAT_MAXCLUST16 (((uint32_t)1 << 16) - 16) /* FAT32: M$ reserves the MS 4 bits of a FAT32 FAT entry so only 18 bits are * available. For M$, the calculation is ((1 << 28) - 19). (The uint32_t * cast is needed for architectures where int is only 16 bits). M$ also * claims that the minimum size is 65,527. */ #define FAT_MINCLUST32 65524 /* #define FAT_MINCLUST32 (FAT_MAXCLUST16 + 1) */ #define FAT_MAXCLUST32 (((uint32_t)1 << 28) - 16) /* Endian-ness helpers */ #ifdef CONFIG_ENDIAN_BIG # define FAT_PUTUINT16(p,v) \ do \ { \ (p)[0] = ((v) >> 8); \ (p)[1] = ((v) & 0xff); \ } \ while (0) #else # define FAT_PUTUINT16(p,v) \ do \ { \ (p)[0] = ((v) & 0xff); \ (p)[1] = ((v) >> 8); \ } \ while (0) #endif #ifdef CONFIG_ENDIAN_BIG # define FAT_PUTUINT32(p,v) \ do \ { \ (p)[0] = ((v) >> 24); \ (p)[1] = (((v) >> 16) & 0xff); \ (p)[2] = (((v) >> 8) & 0xff); \ (p)[3] = ((v) & 0xff); \ } \ while (0) #else # define FAT_PUTUINT32(p,v) \ do \ { \ (p)[0] = ((v) & 0xff); \ (p)[1] = (((v) >> 8) & 0xff); \ (p)[2] = (((v) >> 16) & 0xff); \ (p)[3] = ((v) >> 24); \ } \ while (0) #endif /* Access to data in raw sector data */ #define UBYTE_VAL(p,o) (((uint8_t*)(p))[o]) #define UBYTE_PTR(p,o) &UBYTE_VAL(p,o) #define UBYTE_PUT(p,o,v) (UBYTE_VAL(p,o)=(uint8_t)(v)) #define UINT16_PTR(p,o) ((uint16_t*)UBYTE_PTR(p,o)) #define UINT16_VAL(p,o) (*UINT16_PTR(p,o)) #define UINT16_PUT(p,o,v) (UINT16_VAL(p,o)=(uint16_t)(v)) #define UINT32_PTR(p,o) ((uint32_t*)UBYTE_PTR(p,o)) #define UINT32_VAL(p,o) (*UINT32_PTR(p,o)) #define UINT32_PUT(p,o,v) (UINT32_VAL(p,o)=(uint32_t)(v)) /* Regardless of the endian-ness of the target or alignment of the data, no * special operations are required for byte, string or byte array accesses. * The FAT data stream is little endian so multiple byte values must be * accessed byte-by-byte for big-endian targets. */ #define MBR_PUTSECPERCLUS(p,v) UBYTE_PUT(p,MBR_SECPERCLUS,v) #define MBR_PUTNUMFATS(p,v) UBYTE_PUT(p,MBR_NUMFATS,v) #define MBR_PUTMEDIA(p,v) UBYTE_PUT(p,MBR_MEDIA,v) #define MBR_PUTDRVNUM16(p,v) UBYTE_PUT(p,MBR16_DRVNUM,v) #define MBR_PUTDRVNUM32(p,v) UBYTE_PUT(p,MBR32_DRVNUM,v) #define MBR_PUTBOOTSIG16(p,v) UBYTE_PUT(p,MBR16_BOOTSIG,v) #define MBR_PUTBOOTSIG32(p,v) UBYTE_PUT(p,MBR32_BOOTSIG,v) #define FBR_PUTSECPERCLUS(p,v) UBYTE_PUT(p,FBR_SECPERCLUS,v) #define FBR_PUTNUMFATS(p,v) UBYTE_PUT(p,FBR_NUMFATS,v) #define FBR_PUTMEDIA(p,v) UBYTE_PUT(p,FBR_MEDIA,v) #define FBR_PUTDRVNUM16(p,v) UBYTE_PUT(p,FBR16_DRVNUM,v) #define FBR_PUTDRVNUM32(p,v) UBYTE_PUT(p,FBR32_DRVNUM,v) #define FBR_PUTBOOTSIG16(p,v) UBYTE_PUT(p,FBR16_BOOTSIG,v) #define FBR_PUTBOOTSIG32(p,v) UBYTE_PUT(p,FBR32_BOOTSIG,v) #define PART_PUTTYPE(n,p,v) UBYTE_PUT(p,PART_ENTRY(n)+PART_TYPE,v) #define PART1_PUTTYPE(p,v) UBYTE_PUT(p,PART_ENTRY1+PART_TYPE,v) #define PART2_PUTTYPE(p,v) UBYTE_PUT(p,PART_ENTRY2+PART_TYPE,v) #define PART3_PUTTYPE(p,v) UBYTE_PUT(p,PART_ENTRY3+PART_TYPE,v) #define PART4_PUTTYPE(p,v) UBYTE_PUT(p,PART_ENTRY4+PART_TYPE,v) #define DIR_PUTATTRIBUTES(p,v) UBYTE_PUT(p,DIR_ATTRIBUTES,v) #define DIR_PUTNTRES(p,v) UBYTE_PUT(p,DIR_NTRES,v) #define DIR_PUTCRTTIMETENTH(p,v) UBYTE_PUT(p,DIR_CRTTIMETENTH,v) #ifdef CONFIG_FAT_LFN # define LDIR_PUTSEQ(p,v) UBYTE_PUT(p,LDIR_SEQ,v) # define LDIR_PUTATTRIBUTES(p,v) UBYTE_PUT(p,LDIR_ATTRIBUTES,v) # define LDIR_PUTNTRES(p,v) UBYTE_PUT(p,LDIR_NTRES,v) # define LDIR_PUTCHECKSUM(p,v) UBYTE_PUT(p,LDIR_CHECKSUM,v) #endif /* For the all targets, unaligned values need to be accessed byte-by-byte. * Some architectures may handle unaligned accesses with special interrupt * handlers. But even in that case, it is more efficient to avoid the traps. */ /* Unaligned multi-byte access macros */ #define MBR_PUTBYTESPERSEC(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_BYTESPERSEC),v) #define MBR_PUTROOTENTCNT(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_ROOTENTCNT),v) #define MBR_PUTTOTSEC16(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_TOTSEC16),v) #define MBR_PUTVOLID16(p,v) FAT_PUTUINT32(UBYTE_PTR(p,MBR16_VOLID),v) #define MBR_PUTVOLID32(p,v) FAT_PUTUINT32(UBYTE_PTR(p,MBR32_VOLID),v) #define FBR_PUTBYTESPERSEC(p,v) fat_putuint16(UBYTE_PTR(p,FBR_BYTESPERSEC),v) #define FBR_PUTROOTENTCNT(p,v) fat_putuint16(UBYTE_PTR(p,FBR_ROOTENTCNT),v) #define FBR_PUTTOTSEC16(p,v) fat_putuint16(UBYTE_PTR(p,FBR_TOTSEC16),v) #define FBR_PUTVOLID16(p,v) fat_putuint32(UBYTE_PTR(p,FBR16_VOLID),v) #define FBR_PUTVOLID32(p,v) fat_putuint32(UBYTE_PTR(p,FBR32_VOLID),v) #define PART_PUTSTARTSECTOR(n,p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY(n)+PART_STARTSECTOR),v) #define PART_PUTSIZE(n,p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY(n)+PART_SIZE),v) #define PART1_PUTSTARTSECTOR(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY1+PART_STARTSECTOR),v) #define PART1_PUTSIZE(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY1+PART_SIZE),v) #define PART2_PUTSTARTSECTOR(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY2+PART_STARTSECTOR),v) #define PART2_PUTSIZE(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY2+PART_SIZE),v) #define PART3_PUTSTARTSECTOR(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY3+PART_STARTSECTOR),v) #define PART3_PUTSIZE(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY3+PART_SIZE),v) #define PART4_PUTSTARTSECTOR(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY4+PART_STARTSECTOR),v) #define PART4_PUTSIZE(p,v) FAT_PUTUINT32(UBYTE_PTR(p,PART_ENTRY4+PART_SIZE),v) #ifdef CONFIG_FAT_LFN # define LDIR_PTRWCHAR1_5(p) UBYTE_PTR(p,LDIR_WCHAR1_5) # define LDIR_PTRWCHAR6_11(p) UBYTE_PTR(p,LDIR_WCHAR6_11) # define LDIR_PTRWCHAR12_13(p) UBYTE_PTR(p,LDIR_WCHAR12_13) #endif /* But for multi-byte values, the endian-ness of the target vs. the little * endian order of the byte stream or alignment of the data within the byte * stream can force special, byte-by-byte accesses. */ #ifdef CONFIG_ENDIAN_BIG /* If the target is big-endian, then even aligned multi-byte values must be * accessed byte-by-byte. */ # define MBR_PUTRESVDSECCOUNT(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_RESVDSECCOUNT),v) # define MBR_PUTFATSZ16(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_FATSZ16),v) # define MBR_PUTSECPERTRK(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_SECPERTRK),v) # define MBR_PUTNUMHEADS(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_NUMHEADS),v) # define MBR_PUTHIDSEC(p,v) FAT_PUTUINT32(UBYTE_PTR(p,MBR_HIDSEC),v) # define MBR_PUTTOTSEC32(p,v) FAT_PUTUINT32(UBYTE_PTR(p,MBR_TOTSEC32),v) # define MBR_PUTFATSZ32(p,v) FAT_PUTUINT32(UBYTE_PTR(p,MBR32_FATSZ32),v) # define MBR_PUTEXTFLAGS(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR32_EXTFLAGS),v) # define MBR_PUTFSVER(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR32_FSVER),v) # define MBR_PUTROOTCLUS(p,v) FAT_PUTUINT32(UBYTE_PTR(p,MBR32_ROOTCLUS),v) # define MBR_PUTFSINFO(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR32_FSINFO),v) # define MBR_PUTBKBOOTSEC(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR32_BKBOOTSEC),v) # define MBR_PUTSIGNATURE(p,v) FAT_PUTUINT16(UBYTE_PTR(p,MBR_SIGNATURE),v) # define FBR_PUTRESVDSECCOUNT(p,v) fat_putuint16(UBYTE_PTR(p,FBR_RESVDSECCOUNT),v) # define FBR_PUTFATSZ16(p,v) fat_putuint16(UBYTE_PTR(p,FBR_FATSZ16),v) # define FBR_PUTSECPERTRK(p,v) fat_putuint16(UBYTE_PTR(p,FBR_SECPERTRK),v) # define FBR_PUTNUMHEADS(p,v) fat_putuint16(UBYTE_PTR(p,FBR_NUMHEADS),v) # define FBR_PUTHIDSEC(p,v) fat_putuint32(UBYTE_PTR(p,FBR_HIDSEC),v) # define FBR_PUTTOTSEC32(p,v) fat_putuint32(UBYTE_PTR(p,FBR_TOTSEC32),v) # define FBR_PUTFATSZ32(p,v) fat_putuint32(UBYTE_PTR(p,FBR_FATSZ32),v) # define FBR_PUTEXTFLAGS(p,v) fat_putuint16(UBYTE_PTR(p,FBR_EXTFLAGS),v) # define FBR_PUTFSVER(p,v) fat_putuint16(UBYTE_PTR(p,FBR_FSVER),v) # define FBR_PUTROOTCLUS(p,v) fat_putuint32(UBYTE_PTR(p,FBR_ROOTCLUS),v) # define FBR_PUTFSINFO(p,v) fat_putuint16(UBYTE_PTR(p,FBR_FSINFO),v) # define FBR_PUTBKBOOTSEC(p,v) fat_putuint16(UBYTE_PTR(p,FBR_BKBOOTSEC),v) # define FBR_PUTSIGNATURE(p,v) fat_putuint16(UBYTE_PTR(p,FBR_SIGNATURE),v) # define FSI_PUTLEADSIG(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_LEADSIG),v) # define FSI_PUTSTRUCTSIG(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_STRUCTSIG),v) # define FSI_PUTFREECOUNT(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_FREECOUNT),v) # define FSI_PUTNXTFREE(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_NXTFREE),v) # define FSI_PUTTRAILSIG(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_TRAILSIG),v) # define DIR_PUTCRTIME(p,v) FAT_PUTUINT16(UBYTE_PTR(p,DIR_CRTIME),v) # define DIR_PUTCRDATE(p,v) FAT_PUTUINT16(UBYTE_PTR(p,DIR_CRDATE),v) # define DIR_PUTLASTACCDATE(p,v) FAT_PUTUINT16(UBYTE_PTR(p,DIR_LASTACCDATE),v) # define DIR_PUTFSTCLUSTHI(p,v) FAT_PUTUINT16(UBYTE_PTR(p,DIR_FSTCLUSTHI),v) # define DIR_PUTWRTTIME(p,v) FAT_PUTUINT16(UBYTE_PTR(p,DIR_WRTTIME),v) # define DIR_PUTWRTDATE(p,v) FAT_PUTUINT16(UBYTE_PTR(p,DIR_WRTDATE),v) # define DIR_PUTFSTCLUSTLO(p,v) FAT_PUTUINT16(UBYTE_PTR(p,DIR_FSTCLUSTLO),v) # define DIR_PUTFILESIZE(p,v) FAT_PUTUINT32(UBYTE_PTR(p,DIR_FILESIZE),v) # ifdef CONFIG_FAT_LFN # define LDIR_PUTWCHAR1(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR1_5),v) # define LDIR_PUTWCHAR2(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR1_5+2),v) # define LDIR_PUTWCHAR3(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR1_5+4),v) # define LDIR_PUTWCHAR4(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR1_5+6),v) # define LDIR_PUTWCHAR5(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR1_5+8),v) # define LDIR_PUTWCHAR6(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR6_11),v) # define LDIR_PUTWCHAR7(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR6_11+2),v) # define LDIR_PUTWCHAR8(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR6_11+4),v) # define LDIR_PUTWCHAR9(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR6_11+6),v) # define LDIR_PUTWCHAR10(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR6_11+8),v) # define LDIR_PUTWCHAR11(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR6_11+10),v) # define LDIR_PUTWCHAR12(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR12_13),v) # define LDIR_PUTWCHAR13(p) FAT_PUTUINT16(UBYTE_PTR(p,LDIR_WCHAR12_13+2),v) # endif # define FSI_PUTLEADSIG(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_LEADSIG),v) # define FSI_PUTSTRUCTSIG(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_STRUCTSIG),v) # define FSI_PUTFREECOUNT(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_FREECOUNT),v) # define FSI_PUTNXTFREE(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_NXTFREE),v) # define FSI_PUTTRAILSIG(p,v) FAT_PUTUINT32(UBYTE_PTR(p,FSI_TRAILSIG),v) # define FAT_PUTFAT16(p,i,v) FAT_PUTUINT16(UBYTE_PTR(p,i),v) # define FAT_PUTFAT32(p,i,v) FAT_PUTUINT32(UBYTE_PTR(p,i),v) #else /* But nothing special has to be done for the little endian-case for access * to aligned multibyte values. */ # define MBR_PUTRESVDSECCOUNT(p,v) UINT16_PUT(p,MBR_RESVDSECCOUNT,v) # define MBR_PUTFATSZ16(p,v) UINT16_PUT(p,MBR_FATSZ16,v) # define MBR_PUTSECPERTRK(p,v) UINT16_PUT(p,MBR_SECPERTRK,v) # define MBR_PUTNUMHEADS(p,v) UINT16_PUT(p,MBR_NUMHEADS,v) # define MBR_PUTHIDSEC(p,v) UINT32_PUT(p,MBR_HIDSEC,v) # define MBR_PUTTOTSEC32(p,v) UINT32_PUT(p,MBR_TOTSEC32,v) # define MBR_PUTFATSZ32(p,v) UINT32_PUT(p,MBR32_FATSZ32,v) # define MBR_PUTEXTFLAGS(p,v) UINT16_PUT(p,MBR32_EXTFLAGS,v) # define MBR_PUTFSVER(p,v) UINT16_PUT(p,MBR32_FSVER,v) # define MBR_PUTROOTCLUS(p,v) UINT32_PUT(p,MBR32_ROOTCLUS,v) # define MBR_PUTFSINFO(p,v) UINT16_PUT(p,MBR32_FSINFO,v) # define MBR_PUTBKBOOTSEC(p,v) UINT16_PUT(p,MBR32_BKBOOTSEC,v) # define MBR_PUTSIGNATURE(p,v) UINT16_PUT(p,MBR_SIGNATURE,v) # define FBR_PUTRESVDSECCOUNT(p,v) UINT16_PUT(p,FBR_RESVDSECCOUNT,v) # define FBR_PUTFATSZ16(p,v) UINT16_PUT(p,FBR_FATSZ16,v) # define FBR_PUTSECPERTRK(p,v) UINT16_PUT(p,FBR_SECPERTRK,v) # define FBR_PUTNUMHEADS(p,v) UINT16_PUT(p,FBR_NUMHEADS,v) # define FBR_PUTHIDSEC(p,v) UINT32_PUT(p,FBR_HIDSEC,v) # define FBR_PUTTOTSEC32(p,v) UINT32_PUT(p,FBR_TOTSEC32,v) # define FBR_PUTFATSZ32(p,v) UINT32_PUT(p,FBR_FATSZ32,v) # define FBR_PUTEXTFLAGS(p,v) UINT16_PUT(p,FBR_EXTFLAGS,v) # define FBR_PUTFSVER(p,v) UINT16_PUT(p,FBR_FSVER,v) # define FBR_PUTROOTCLUS(p,v) UINT32_PUT(p,FBR_ROOTCLUS,v) # define FBR_PUTFSINFO(p,v) UINT16_PUT(p,FBR_FSINFO,v) # define FBR_PUTBKBOOTSEC(p,v) UINT16_PUT(p,FBR_BKBOOTSEC,v) # define FBR_PUTSIGNATURE(p,v) UINT16_PUT(p,FBR_SIGNATURE,v) # define FSI_PUTLEADSIG(p,v) UINT32_PUT(p,FSI_LEADSIG,v) # define FSI_PUTSTRUCTSIG(p,v) UINT32_PUT(p,FSI_STRUCTSIG,v) # define FSI_PUTFREECOUNT(p,v) UINT32_PUT(p,FSI_FREECOUNT,v) # define FSI_PUTNXTFREE(p,v) UINT32_PUT(p,FSI_NXTFREE,v) # define FSI_PUTTRAILSIG(p,v) UINT32_PUT(p,FSI_TRAILSIG,v) # define DIR_PUTCRTIME(p,v) UINT16_PUT(p,DIR_CRTIME,v) # define DIR_PUTCRDATE(p,v) UINT16_PUT(p,DIR_CRDATE,v) # define DIR_PUTLASTACCDATE(p,v) UINT16_PUT(p,DIR_LASTACCDATE,v) # define DIR_PUTFSTCLUSTHI(p,v) UINT16_PUT(p,DIR_FSTCLUSTHI,v) # define DIR_PUTWRTTIME(p,v) UINT16_PUT(p,DIR_WRTTIME,v) # define DIR_PUTWRTDATE(p,v) UINT16_PUT(p,DIR_WRTDATE,v) # define DIR_PUTFSTCLUSTLO(p,v) UINT16_PUT(p,DIR_FSTCLUSTLO,v) # define DIR_PUTFILESIZE(p,v) UINT32_PUT(p,DIR_FILESIZE,v) # ifdef CONFIG_FAT_LFN # define LDIR_PUTWCHAR1(p,v) UINT16_PUT(p,LDIR_WCHAR1_5,v) # define LDIR_PUTWCHAR2(p,v) UINT16_PUT(p,LDIR_WCHAR1_5+2,v) # define LDIR_PUTWCHAR3(p,v) UINT16_PUT(p,LDIR_WCHAR1_5+4,v) # define LDIR_PUTWCHAR4(p,v) UINT16_PUT(p,LDIR_WCHAR1_5+6,v) # define LDIR_PUTWCHAR5(p,v) UINT16_PUT(p,LDIR_WCHAR1_5+8,v) # define LDIR_PUTWCHAR6(p,v) UINT16_PUT(p,LDIR_WCHAR6_11,v) # define LDIR_PUTWCHAR7(p,v) UINT16_PUT(p,LDIR_WCHAR6_11+2,v) # define LDIR_PUTWCHAR8(p,v) UINT16_PUT(p,LDIR_WCHAR6_11+4,v) # define LDIR_PUTWCHAR9(p,v) UINT16_PUT(p,LDIR_WCHAR6_11+6,v) # define LDIR_PUTWCHAR10(p,v) UINT16_PUT(p,LDIR_WCHAR6_11+8,v) # define LDIR_PUTWCHAR11(p,v) UINT16_PUT(p,LDIR_WCHAR6_11+10,v) # define LDIR_PUTWCHAR12(p,v) UINT16_PUT(p,LDIR_WCHAR12_13,v) # define LDIR_PUTWCHAR13(p,v) UINT16_PUT(p,LDIR_WCHAR12_13+2,v) # endif # define FSI_PUTLEADSIG(p,v) UINT32_PUT(p,FSI_LEADSIG,v) # define FSI_PUTSTRUCTSIG(p,v) UINT32_PUT(p,FSI_STRUCTSIG,v) # define FSI_PUTFREECOUNT(p,v) UINT32_PUT(p,FSI_FREECOUNT,v) # define FSI_PUTNXTFREE(p,v) UINT32_PUT(p,FSI_NXTFREE,v) # define FSI_PUTTRAILSIG(p,v) UINT32_PUT(p,FSI_TRAILSIG,v) # define FAT_PUTFAT16(p,i,v) UINT16_PUT(p,i,v) # define FAT_PUTFAT32(p,i,v) UINT32_PUT(p,i,v) #endif /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #endif /* __APPS_FSUTILS_MKFATFS_FAT32_H */