#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config NETUTILS_PTPD
	bool "PTPD client/server"
	default n
	depends on NET_IPv4
	depends on NET_IGMP
	depends on NET_UDP
	---help---
		Build a minimal implementation of IEEE-1588 precision time protocol.
		Uses system gettimeofday() and adjtime() calls to synchronize clock
		with a master clock through network, or to provide a master clock to
		other systems.

if NETUTILS_PTPD

config NETUTILS_PTPD_DEBUG
	bool "Enable PTP debug messages"
	default n
	depends on DEBUG_INFO
	---help---
		Enable PTP debug messages even if CONFIG_DEBUG_NET_INFO is not enabled.

config NETUTILS_PTPD_CLIENT
	bool "Enable client support"
	default y
	---help---
		Act as a PTP client, synchronizing the NuttX clock to a remote master
		clock.

config NETUTILS_PTPD_SERVER
	bool "Enable server support"
	default n
	---help---
		Act as a PTP server, providing NuttX clock time to other systems.

		Both server and client can be simultaneously enabled. NuttX will then
		synchronize to a higher priority master clock, or act as a master
		clock itself if it has the highest priority.
		Refer to Best Master Clock algorithm in IEEE-1588 for details.

config NETUTILS_PTPD_STACKSIZE
	int "PTP daemon stack stack size"
	default DEFAULT_TASK_STACKSIZE

config NETUTILS_PTPD_SERVERPRIO
	int "PTP daemon priority"
	default 100

config NETUTILS_PTPD_DOMAIN
	int	"PTP domain selection"
	default 0
	range 0 127
	---help---
		Set PTP domain to participate in. Default domain is 0, other domains
		can be used to isolate reference clocks from each other.

if NETUTILS_PTPD_SERVER

config NETUTILS_PTPD_PRIORITY1
	int "PTP server priority1"
	default 128
	range 0 255
	---help---
		Set clock priority to announce when acting as a PTP server.
		Lower value is higher priority.

		A higher priority1 clock will be selected without regard to announced
		clock quality fields.
		Refer to Best Master Clock algorithm in IEEE-1588 for details.

config NETUTILS_PTPD_PRIORITY2
	int "PTP server priority2"
	default 128
	range 0 255
	---help---
		Set clock subpriority to announce when acting as a PTP server.
		This will distinguish between two clocks that are equivalent in
		priority1, class and accuracy values.
		Lower value is higher priority.

config NETUTILS_PTPD_CLASS
	int "PTP server class"
	default 248
	range 0 255
	---help---
		Set master clock class to announce when acting as a PTP server.
		Lower value means higher quality clock source.
		248 is the default for unknown class.

config NETUTILS_PTPD_ACCURACY
	int "PTP server accuracy"
	default 254
	range 0 255
	---help---
		Set master clock accuracy to announce when acting as a PTP server.
		Logarithmic scale is defined in IEEE-1588:
		32: +-  25 ns
		33: +- 100 ns
		34: +- 250 ns
		35: +-   1 us
		36: +-   2.5 us
		37: +-  10 us
		38: +-  25 us
		39: +- 100 us
		40: +- 250 us
		41: +-   1 ms
		42: +-   2.5 ms
		43: +-  10 ms
		44: +-  25 ms
		45: +- 100 ms
		46: +- 250 ms
		47: +-   1 s
		48: +-  10 s
		49: +-  more than 10 s
		254: Unknown

config NETUTILS_PTPD_CLOCKSOURCE
	int "PTP server clock source type"
	default 160
	range 0 255
	---help---
		Set clock source type to announce when acting as a PTP server.
		Common values:
		 32: GPS
		 64: PTP
		 80: NTP
		144: Other
		160: Internal oscillator

config NETUTILS_PTPD_SYNC_INTERVAL_MSEC
	int "PTP server sync transmit interval (ms)"
	default 1000
	---help---
		How often to transmit sync packets in server mode.

config NETUTILS_PTPD_ANNOUNCE_INTERVAL_MSEC
	int "PTP server announce transmit interval (ms)"
	default 10000
	---help---
		How often to transmit announce packets in server mode.

endif # NETUTILS_PTPD_SERVER

if NETUTILS_PTPD_CLIENT

config NETUTILS_PTPD_TIMEOUT_MS
	int "PTP client timeout for changing clock source (ms)"
	default 60000
	---help---
		If no packets are being received from currently chosen clock source,
		fall back to next best clock source after this many seconds.

config NETUTILS_PTPD_SETTIME_THRESHOLD_MS
	int "PTP client threshold for changing system time (ms)"
	default 1000
	---help---
		If difference between local and remote clock exceeds this threshold,
		time is reset with settimeofday() instead of changing the rate with
		adjtime().

endif # NETUTILS_PTPD_CLIENT

endif # NETUTILS_PTPD