#
#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menu "NSH Library"

config NSH_LIBRARY
	bool "NSH Library"
	default n
	select NETUTILS_NETLIB if NET
	select LIBC_NETDB if NET
	select READLINE_HAVE_EXTMATCH
	---help---
		Build the NSH support library.  This is used, for example, by
		system/nsh in order to implement the full NuttShell (NSH).

if NSH_LIBRARY

menuconfig NSH_MOTD
	bool "Message of the Day (MOTD)"
	default n
	---help---
		Support a user-provided Message of the Day (MOTD) that will be
		presented each time new NSH session is opened.

if NSH_MOTD

config NSH_PLATFORM_MOTD
	bool "Platform MOTD"
	default n
	---help---
		If this option is selected, the NSH will call into platform-specific
		logic in order to get the MOTD.  The function prototype for this
		call is:

			void platform_motd(FAR char *buffer, size_t buflen);

		Where buffer is the location to return the MOTD and buflen is the
		length of that buffer.  The maximum size of the buffer is detemined
		by NSH_FILEIOSIZE.  An appopriate location for the
		implementation of platform_motd would be within apps/platform/<board>.

		One newline will be inserted after the platform-supplied message.

		platform_motd() is prototyped and described in apps/include/nshlib/nshlib.h
		which may be included like:

			#include "nshlib/nshlib.h"

config NSH_MOTD_STRING
	string "MOTD String"
	default "No MOTD string provided"
	depends on !NSH_PLATFORM_MOTD
	---help---
		If NSH_MOTD is selected, but NSH_PLATFORM_MOTD is not, then a fixed
		MOTD string will be used.  That string is provided by this selection.

		One newline will be inserted after supplied MOTD message.

endif # NSH_MOTD

menu "Command Line Configuration"

config NSH_PROMPT_STRING
	string "Prompt String"
	default "nsh> "
	---help---
		Provide the shell prompt string, default is "nsh> ".

choice
	prompt "Command Line Editor"
	default NSH_READLINE if DEFAULT_SMALL
	default NSH_CLE if !DEFAULT_SMALL

config NSH_READLINE
	bool "Minimal readline()"
	select SYSTEM_READLINE
	---help---
		Selects the minimal implementation of readline().  This minimal
		implementation provides on backspace for command line editing.

config NSH_CLE
	bool "Command Line Editor"
	select SYSTEM_CLE
	---help---
		Selects the more extensive, EMACS-like command line editor.
		Select this option only if (1) you don't mind a modest increase
		in the FLASH footprint, and (2) you work with a terminal that
		supports extensive VT100 editing commands.

		Selecting this option will add probably 1.5-2KB to the FLASH
		footprint.

endchoice

config NSH_LINELEN
	int "Max command line length"
	default 64 if DEFAULT_SMALL
	default 80 if !DEFAULT_SMALL
	---help---
		The maximum length of one command line and of one output line.
		Default: 64/80

config NSH_DISABLE_SEMICOLON
	bool "Disable multiple commands per line"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	---help---
		By default, you can enter multiple NSH commands on a line with each
		command separated by a semicolon.  You can disable this feature to
		save a little memory on FLASH challenged platforms.

config NSH_QUOTE
	bool "Enable back-slash quoting of characters"
	default n if DEFAULT_SMALL || !NSH_ARGCAT
	default y if !DEFAULT_SMALL && NSH_ARGCAT
	---help---
		Force special characters like back-quotes, quotation marks, and the
		back-slash character itself to be treat like normal text.

		This feature is only implemented properly for the case where
		CONFIG_NSH_ARGCAT is also selected.

config NSH_CMDPARMS
	bool "Enable commands as parameters"
	default n if DEFAULT_SMALL
	default y if !DEFAULT_SMALL
	depends on !DISABLE_MOUNTPOINT
	---help---
		If selected, then the output from commands, from file applications, and
		from NSH built-in commands can be used as arguments to other
		commands.  The entity to be executed is identified by enclosing the
		command line in back quotes.  For example,

			set FOO `myprogram $BAR`

		Will execute the program named myprogram passing it the value of the
		environment variable BAR.  The value of the environment variable FOO
		is then set output of myprogram on stdout.

		Because this feature commits significant resources, it is disabled by
		default.

config NSH_MAXARGUMENTS
	int "Maximum number of command arguments"
	default 7
	---help---
		The maximum number of NSH command arguments.
		Default: 7

config NSH_ARGCAT
	bool "Concatenation of argument strings"
	default n if DEFAULT_SMALL
	default y if !DEFAULT_SMALL
	---help---
		Support concatenation of strings with environment variables or command
		output.  For example:

			set FOO XYZ
			set BAR 123
			set FOOBAR ABC_${FOO}_${BAR}

		would set the environment variable FOO to XYZ, BAR to 123 and FOOBAR
		to ABC_XYZ_123.  If NSH_ARGCAT is not selected, then a slightly small
		FLASH footprint results but then also only simple environment
		variables like $FOO can be used on the command line.

config NSH_NESTDEPTH
	int "Maximum command nesting"
	default 3
	---help---
		The maximum number of nested if-then[-else]-fi sequences that
		are permissable.  Default: 3

config NSH_DISABLEBG
	bool "Disable background commands"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	---help---
		This can be set to 'y' to suppress support for background
		commands.  This setting disables the 'nice' command prefix and
		the '&' command suffix.  This would only be set on systems
		where a minimal footprint is a necessity and background command
		execution is not.

endmenu # Command Line Configuration

config NSH_BUILTIN_APPS
	bool "Enable built-in applications"
	default n
	depends on BUILTIN
	---help---
		Support external registered, "built-in" applications that can be
		executed from the NSH command line (see apps/README.txt for
		more information).  This options requires support for builtin
		applications (BUILTIN).

config NSH_FILE_APPS
	bool "Enable execution of program files"
	default n
	depends on LIBC_EXECFUNCS
	---help---
		Support execution of program files residing within a file
		system.  This options requires support for the posix_spawn()
		interface (LIBC_EXECFUNCS).

menu "Disable Individual commands"

config NSH_DISABLE_ADDROUTE
	bool "Disable addroute"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NET_ROUTE

config NSH_DISABLE_ARP
	bool "Disable arp"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NET_ARP

config NSH_DISABLE_BASE64DEC
	bool "Disable base64dec"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NETUTILS_CODECS && CODECS_BASE64

config NSH_DISABLE_BASE64ENC
	bool "Disable base64enc"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NETUTILS_CODECS && CODECS_BASE64

config NSH_DISABLE_BASENAME
	bool "Disable basename"
	default y if DEFAULT_SMALL || NSH_DISABLESCRIPT
	default n if !DEFAULT_SMALL && !NSH_DISABLESCRIPT

config NSH_DISABLE_CAT
	bool "Disable cat"
	default n

config NSH_DISABLE_CD
	bool "Disable cd"
	default n

config NSH_DISABLE_CP
	bool "Disable cp"
	default n

config NSH_DISABLE_CMP
	bool "Disable cmp"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_DATE
	bool "Disable date"
	default n if RTC
	default y if !RTC

config NSH_DISABLE_DD
	bool "Disable dd"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_DF
	bool "Disable df"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_DELROUTE
	bool "Disable delroute"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NET_ROUTE

config NSH_DISABLE_DIRNAME
	bool "Disable dirname"
	default y if DEFAULT_SMALL || NSH_DISABLESCRIPT
	default n if !DEFAULT_SMALL && !NSH_DISABLESCRIPT

config NSH_DISABLE_ECHO
	bool "Disable echo"
	default n

config NSH_DISABLE_ENV
	bool "Disable env"
	default n

config NSH_DISABLE_EXEC
	bool "Disable exec"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_EXIT
	bool "Disable exit"
	default y if DEFAULT_SMALL && !NSH_TELNET
	default n if !DEFAULT_SMALL || NSH_TELNET

config NSH_DISABLE_EXPORT
	bool "Disable export"
	default n

config NSH_DISABLE_FREE
	bool "Disable free"
	default n

config NSH_DISABLE_GET
	bool "Disable get"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_HELP
	bool "Disable help"
	default n

config NSH_DISABLE_HEXDUMP
	bool "Disable hexdump"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_IFCONFIG
	bool "Disable ifconfig"
	default y if !FS_PROCFS || FS_PROCFS_EXCLUDE_NET
	default n if FS_PROCFS && !FS_PROCFS_EXCLUDE_NET

config NSH_DISABLE_IFUPDOWN
	bool "Disable ifup/down"
	default y if !FS_PROCFS || FS_PROCFS_EXCLUDE_NET
	default n if FS_PROCFS && !FS_PROCFS_EXCLUDE_NET

config NSH_DISABLE_KILL
	bool "Disable kill"
	default n

config NSH_DISABLE_LOSETUP
	bool "Disable losetup"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_LOSMART
	bool "Disable losmart"
	default y if DEFAULT_SMALL || !MTD_SMART
	default n if !DEFAULT_SMALL && MTD_SMART

config NSH_DISABLE_LN
	bool "Disable ln"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on PSEUDOFS_SOFTLINKS

config NSH_DISABLE_LS
	bool "Disable ls"
	default n

config NSH_DISABLE_MB
	bool "Disable mb"
	default n

config NSH_DISABLE_MD5
	bool "Disable md5"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NETUTILS_CODECS && CODECS_HASH_MD5

config NSH_DISABLE_MKDIR
	bool "Disable mkdir"
	default n

config NSH_DISABLE_MKFATFS
	bool "Disable mkfatfs"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on FUTILS_MKFATFS

config NSH_DISABLE_MKFIFO
	bool "Disable mkfifo"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on PIPES

config NSH_DISABLE_MKRD
	bool "Disable mkrd"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_MKSMARTFS
	bool "Disable mksmartfs"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on FS_SMARTFS && FSUTILS_MKSMARTFS

config NSH_DISABLE_MH
	bool "Disable mh"
	default n

config NSH_DISABLE_MODCMDS
	bool "Disable modules commands (insmod, rmmod, lsmod)"
	default n
	depends on MODULE

config NSH_DISABLE_MOUNT
	bool "Disable mount"
	default n

config NSH_DISABLE_MV
	bool "Disable mv"
	default n

config NSH_DISABLE_MW
	bool "Disable mw"
	default n

config NSH_DISABLE_NSFMOUNT
	bool "Disable nfsmount"
	default n
	depends on NFS

config NSH_DISABLE_NSLOOKUP
	bool "Disable nslookup"
	default n
	depends on LIBC_NETDB && NETDB_DNSCLIENT

config NSH_DISABLE_PASSWD
	bool "Disable passwd"
	default y
	depends on NSH_LOGIN_PASSWD && FS_WRITABLE && !FSUTILS_PASSWD_READONLY

config NSH_DISABLE_POWEROFF
	bool "Disable poweroff"
	default n if !DEFAULT_SMALL
	default y if DEFAULT_SMALL
	depends on BOARDCTL_POWEROFF

config NSH_DISABLE_PRINTF
	bool "Disable printf"
	default y

config NSH_DISABLE_PS
	bool "Disable ps"
	default y if !FS_PROCFS || FS_PROCFS_EXCLUDE_PROCESS
	default n if FS_PROCFS && !FS_PROCFS_EXCLUDE_PROCESS

config NSH_DISABLE_PSSTACKUSAGE
	bool "Disable ps stack usage"
	depends on STACK_COLORATION && !NSH_DISABLE_PS
	default n
	---help---
		Disable to save space and not pull in floating point routines

config NSH_DISABLE_PUT
	bool "Disable put"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_PWD
	bool "Disable pwd"
	default n

config NSH_DISABLE_READLINK
	bool "Disable readlink"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on PSEUDOFS_SOFTLINKS

config NSH_DISABLE_REBOOT
	bool "Disable reboot"
	default n if !DEFAULT_SMALL
	default y if DEFAULT_SMALL
	depends on BOARDCTL_RESET

config NSH_DISABLE_RM
	bool "Disable rm"
	default n

config NSH_DISABLE_RMDIR
	bool "Disable rmdir"
	default n

config NSH_DISABLE_ROUTE
	bool "Disable delroute"
	depends on FS_PROCFS && NET_ROUTE && !FS_PROCFS_EXCLUDE_NET && !FS_PROCFS_EXCLUDE_ROUTE
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_SET
	bool "Disable set"
	default n

config NSH_DISABLE_SH
	bool "Disable sh"
	default n

config NSH_DISABLE_SHUTDOWN
	bool "Disable shutdown"
	default n if !DEFAULT_SMALL && BOARD_POWEROFF && BOARD_RESET
	default y if DEFAULT_SMALL || !BOARD_POWEROFF || !BOARD_RESET
	depends on BOARDCTL_POWEROFF || BOARDCTL_RESET

config NSH_DISABLE_SLEEP
	bool "Disable sleep"
	default n

config NSH_DISABLE_TIME
	bool "Disable time"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_TEST
	bool "Disable test"
	default n

config NSH_DISABLE_TELNETD
	bool "Disable telnetd"
	default n if !NSH_NETLOCAL
	default y if NSH_NETLOCAL

config NSH_DISABLE_TRUNCATE
	bool "Disable truncate"
	default y

config NSH_DISABLE_UMOUNT
	bool "Disable umount"
	default n

config NSH_DISABLE_UNAME
	bool "Disable uname"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_UNSET
	bool "Disable unset"
	default n

config NSH_DISABLE_URLDECODE
	bool "Disable urldecode"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NETUTILS_CODECS && CODECS_URLCODE

config NSH_DISABLE_URLENCODE
	bool "Disable urlencode"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	depends on NETUTILS_CODECS && CODECS_URLCODE

config NSH_DISABLE_USERADD
	bool "Disable useradd"
	default y
	depends on NSH_LOGIN_PASSWD && FS_WRITABLE && !FSUTILS_PASSWD_READONLY

config NSH_DISABLE_USERDEL
	bool "Disable userdel"
	default y
	depends on NSH_LOGIN_PASSWD && FS_WRITABLE && !FSUTILS_PASSWD_READONLY

config NSH_DISABLE_USLEEP
	bool "Disable usleep"
	default n

config NSH_DISABLE_WGET
	bool "Disable wget"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

config NSH_DISABLE_XD
	bool "Disable xd"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL

endmenu

if MMCSD

config NSH_MMCSDMINOR
	int "MMC/SD minor number"
	default 0
	---help---
		If board-specific NSH start-up logic needs to mount an MMC/SD device, then the
		setting should be provided to identify the MMC/SD minor device number (i.e., the N ini
		/dev/mmcsdN).  Default 0

config NSH_MMCSDSLOTNO
	int "MMC/SD slot number"
	default 0
	---help---
		If board-specific NSH start-up supports more than one MMC/SD slot, then this setting
		should be provided to indicate which slot should be used.  Default: 0.

config NSH_MMCSDSPIPORTNO
	int "MMC/SD SPI device number"
	default 0
	depends on MMCSD_SPI
	---help---
		If board-specif NSH start-up logic will mount an SPI-based MMC/SD volume, then this
		setting may be needed to tell the board logic which SPI bus to use.  Default: 0
		(meaning is board-specific).

endif # MMCSD

menu "Configure Command Options"

config NSH_VARS
	bool "NSH variables"
	default n
	---help---
		By default, there are no internal NSH variables.  NSH will use OS
		environment variables for all variable storage.  If this option, NSH
		will also support local NSH variables.  These variables are, for the
		most part, transparent and work just like the OS environment
		variables.  The difference is that when you create new tasks, all of
		environment variables are inherited by the created tasks.  NSH local
		variables are not.

		If this option is enabled (and CONFIG_DISABLE_ENVIRON is not), then a
		new command called 'export' is enabled.  The export command works very
		must like the set command except that is operates on environment
		variables.  When CONFIG_NSH_VARS is enabled, there are changes in the
		behavior of certains commands

		============== =========================== ===========================
		CMD             w/o CONFIG_NSH_VARS        w/CONFIG_NSH_VARS
		============== =========================== ===========================
		set <a> <b>    Set environment var a to b  Set NSH var a to b
		unset <a>      Unsets environment var a    Unsets both environment var
		                                           and NSH var a
		export <a> <b> Causes an error             Unsets NSH var a.  Sets
		                                           environment var a to b.
		export <a>     Causes an error             Sets environment var a to
		                                           NSH var b (or "").  Unsets
		                                           local var a.
		env            Lists all environment       Lists all environment
		               variables                   variables
		============== =========================== ===========================

config NSH_CMDOPT_DD_STATS
	bool "dd: Support transfer statistics"
	default n
	depends on !NSH_DISABLE_DD

config NSH_CODECS_BUFSIZE
	int "File buffer size used by CODEC commands"
	default 128

config NSH_CMDOPT_HEXDUMP
	bool "hexdump: Enable 'skip' and 'count' parameters"
	default n if DEFAULT_SMALL
	default y if !DEFAULT_SMALL
	depends on !NSH_DISABLE_HEXDUMP

config NSH_PROC_MOUNTPOINT
	string "procfs mountpoint"
	default "/proc"
	depends on FS_PROCFS

endmenu

config NSH_FILEIOSIZE
	int "NSH I/O buffer size"
	default 512 if DEFAULT_SMALL
	default 1024 if !DEFAULT_SMALL
	---help---
		Size of a static I/O buffer used for file access (ignored if
		there is no filesystem). Default is 512/1024.

config NSH_STRERROR
	bool "Use strerror()"
	default n
	depends on LIBC_STRERROR
	---help---
		strerror(errno) makes more readable output but strerror() is
		very large and will not be used unless this setting is 'y'
		This setting depends upon the strerror() having been enabled
		with LIBC_STRERROR.

menu "Scripting Support"

config NSH_DISABLESCRIPT
	bool "Disable script support"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	---help---
		This can be set to 'y' to suppress support for scripting.  This
		setting disables the 'sh', 'test', and '[' commands and the
		if-then[-else]-fi construct.  This would only be set on systems
		where a minimal footprint is a necessity and scripting is not.

if !NSH_DISABLESCRIPT

config NSH_DISABLE_ITEF
	bool "Disable if-then-else-fi"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	---help---
		This can be set to 'y' to suppress support for if-then-else-fi
		sequences in scripts.  This would only be set on systems where
		some minimal scripting is required but if-then-else-fi is not.

config NSH_DISABLE_LOOPS
	bool "Disable loops"
	default y if DEFAULT_SMALL
	default n if !DEFAULT_SMALL
	---help---
		This can be set to 'y' to suppress support for while-do-done and
		until-do-done sequences in scripts.  This would only be set on
		systems where some minimal scripting is required but looping
		is not.

endif # !NSH_DISABLESCRIPT

config NSH_MMCSDMINOR
	int "MMC/SD minor device number"
	default 0
	---help---
		If the architecture supports an MMC/SD slot and if the NSH
		architecture specific logic is present, this option will provide
		the MMC/SD minor number, i.e., the MMC/SD block driver will
		be registered as /dev/mmcsdN where N is the minor number.
		Default is zero.

config NSH_ROMFSETC
	bool "Support ROMFS start-up script"
	default n
	depends on FS_ROMFS
	---help---
		Mount a ROMFS filesystem at /etc and provide a startup script
		at /etc/init.d/rcS.  The default startup script will mount
		a FAT FS RAMDISK at /tmp but the logic is easily extensible.

if NSH_ROMFSETC

config NSH_CROMFSETC
	bool "Support CROMFS (compressed) start-up script"
	default n
	depends on NSH_ROMFSETC && FS_CROMFS
	---help---
		Mount a CROMFS filesystem at /etc and provide a compressed startup
		script at /etc/init.d/rcS.

config NSH_ROMFSRC
	bool "Support ROMFS login script"
	default n
	---help---
		The ROMFS start-up script will be executed excactly once.  For
		simple, persistence consoles (like a serial console).  But with
		other other kinds of consoles, there may be multiple, transient
		sessions (such as Telnet and USB consoles).  In these cases, you
		may need another script that is executed at the beginning of each
		session.  Selecting this option enables support for such a login
		script

config NSH_ROMFSMOUNTPT
	string "ROMFS mount point"
	default "/etc"
	---help---
		The default mountpoint for the ROMFS volume is /etc, but that
		can be changed with this setting.  This must be a absolute path
		beginning with '/'.

config NSH_INITSCRIPT
	string "Relative path to startup script"
	default "init.d/rcS"
	---help---
		This is the relative path to the startup script within the mountpoint.
		The default is init.d/rcS.  This is a relative path and must not
		start with '/'.

config NSH_RCSCRIPT
	string "Relative path to login script"
	default ".nshrc"
	depends on NSH_ROMFSRC
	---help---
		This is the relative path to the login script within the mountpoint.
		The default is .nshrc.  This is a relative path and must not
		start with '/'.

config NSH_ROMFSDEVNO
	int "ROMFS block device minor number"
	default 0
	---help---
		This is the minor number of the ROMFS block device.  The default is
		'0' corresponding to /dev/ram0.

config NSH_ROMFSSECTSIZE
	int "ROMFS sector size"
	default 64
	---help---
		This is the sector size to use with the ROMFS volume.  Since the
		default volume is very small, this defaults to 64 but should be
		increased if the ROMFS volume were to be become large.  Any value
		selected must be a power of 2.

choice
	prompt "ROMFS header location"
	default NSH_DEFAULTROMFS

config NSH_DEFAULTROMFS
	bool "Default ROMFS header path"
	---help---
		Selects the default header located in the source directory of the
		NSH library.

config NSH_ARCHROMFS
	bool "Architecture-specific ROMFS path"
	---help---
		Enable this option to provide an architecture-specific ROMFS
		header at arch/<boardname>/nsh_romfsimg.h.  Note that this header
		will be linked (or copied) from nuttx/configs/<boardname>/include
		and should be stored at that location in the nuttx configs/
		sub-directory.

config NSH_CUSTOMROMFS
	bool "Custom ROMFS header path"
	---help---
		Enable this option to provide a custom ROMFS header. The path to
		the header file can be specified in the option "Custom ROMFS header
		file".

endchoice

if NSH_CUSTOMROMFS

config NSH_CUSTOMROMFS_HEADER
	string "Custom ROMFS header file path"
	default ""
	---help---
		Specifies the path to the custom ROMFS header file.  This must be
		either a full path or a path relative to one of the include file
		search paths provided in your CFLAGS.

endif #NSH_CUSTOMROMFS

config NSH_FATDEVNO
	int "FAT block device minor number"
	default 1
	depends on FS_FAT
	---help---
		When the default rcS file used when NSH_ROMFSETC is selected, it
		will mount a FAT FS under /tmp. This is the minor number of the FAT
		FS block device.  The default is '1' corresponding to /dev/ram1.

config NSH_FATSECTSIZE
	int "FAT sector size"
	default 512
	depends on FS_FAT
	---help---
		When the default rcS file used when NSH_ROMFSETC is selected, it
		will mount a FAT FS under /tmp. This is the sector size use with the
		FAT FS. Default is 512.

config NSH_FATNSECTORS
	int "FAT number of sectors"
	default 1024
	depends on FS_FAT
	---help---
		When the default rcS file used when NSH_ROMFSETC is selected, it
		will mount a FAT FS under /tmp. This is the number of sectors to use
		with the FAT FS.  Defualt is 1024.  The amount of memory used by the
		FAT FS will be NSH_FATSECTSIZE * NSH_FATNSECTORS bytes.

config NSH_FATMOUNTPT
	string "FAT mount point"
	default "/tmp"
	depends on FS_FAT
	---help---
		When the default rcS file used when NSH_ROMFSETC is selected, it
		will mount a FAT FS under /tmp. This is the location where the FAT
		FS will be mounted.  Default is "/tmp".

endif # NSH_ROMFSETC
endmenu # Scripting Support

menu "Console Configuration"

config NSH_CONSOLE
	bool "Use console"
	default y
	---help---
		If NSH_CONSOLE is set to 'y', then a character driver
		console front-end is selected (/dev/console).

		Normally, the serial console device is a UART and RS-232
		interface.  However, if USBDEV is defined, then a USB
		serial device may, instead, be used if the one of
		the following are defined:

		PL2303 and PL2303_CONSOLE - Set up the Prolifics PL2303
		emulation as a console device at /dev/console.

		CDCACM and CDCACM_CONSOLE - Set up the CDC/ACM serial
		device as a console device at dev/console.

		NSH_USBCONSOLE and NSH_USBCONDEV - Sets up some other USB
		serial device as the NSH console (not necessarily dev/console).

config NSH_USBCONSOLE
	bool "Use a USB serial console"
	default n
	depends on LIB_BOARDCTL && NSH_CONSOLE && USBDEV && (CDCACM || PL2303)
	select BOARDCTL_USBDEVCTRL
	---help---
		If defined, then the an arbitrary USB serial device may be used
		to as the NSH console.  In this case, NSH_USBCONDEV must be defined
		to indicate which USB serial device to use as the console.

if NSH_USBCONSOLE

config NSH_USBCONDEV
	string "USB serial console device"
	default "/dev/ttyACM0" if CDCACM
	default "/dev/ttyUSB0" if !CDCACM
	---help---
		If NSH_USBCONSOLE is set to 'y', then NSH_USBCONDEV must
		also be set to select the USB device used to support the
		NSH console.   This should be set to the quoted name of a
		read-/write-able USB driver.  Default: "/dev/ttyACM0".

config USBDEV_MINOR
	int "USB serial console device minor number"
	default 0
	---help---
		If there are more than one USB devices, then a USB device
		minor number may also need to be provided. Default: 0

endif # NSH_USBCONSOLE

config NSH_ALTCONDEV
	bool "Alternative console device"
	default n
	depends on NSH_CONSOLE && !NSH_USBCONSOLE && !NSH_TELNET
	---help---
		If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may
		also be selected to enable use of an alternate character device
		to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected,
		then NSH_ALTSTDIN, NSH_ALTSTDOUT and NSH_ALTSTDERR must be set
		to select the serial devices used to support the NSH console.
		This may be useful, for example, to separate the NSH command
		line from the system console when the system console is used to
		provide debug output.

		Default: stdin, stderr and stdout (probably "/dev/console")

		NOTE 1: When any other device other than /dev/console is used
		for a user interface, (1) linefeeds (\n) will not be expanded to
		carriage return / linefeeds (\r\n).  You will need to set
		your terminal program to account for this.  And (2) input is
		not automatically echoed so you will have to turn local echo on.

		NOTE 2:  This option forces the console of all sessions to use
		NSH_ALTSTD(IN/OUT/ERR).  Hence, this option only makes sense for
		a system that supports only a single session.  This option is,
		in particular, incompatible with Telnet sessions because each
		Telnet session must use a different console device.

if NSH_ALTCONDEV

config NSH_ALTSTDIN
	string "Alternative console \"stdin\" device name"
	default "/dev/console"
	---help---
		If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may
		also be selected to enable use of an alternate character device
		to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected,
		then NSH_ALTSTDIN must be set to select the "stdin" device to
		support the NSH console.   This should be set to the quoted name
		of a readable character driver such as:

			NSH_ALTSTDIN="/dev/ttyS1".

		This way the input will come from "/dev/ttyS1".

config NSH_ALTSTDOUT
	string "Alternative console \"stdout\" device name"
	default "/dev/console" if !SLCD_CONSOLE
	default "/dev/slcd0"   if SLCD_CONSOLE
	---help---
		If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may
		also be selected to enable use of an alternate character device
		to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected,
		then NSH_ALTSTDOUT must be set to select the "stdout" device to
		support the NSH console.   This should be set to the quoted name
		of a write-able character driver such as:

			NSH_ALTSTDIN="/dev/ttyS1".

		This way the standard output will go to "/dev/ttyS1".

config NSH_ALTSTDERR
	string "Alternative console \"stderr\" device name"
	default "/dev/console" if !SLCD_CONSOLE
	default "/dev/slcd0"   if SLCD_CONSOLE
	---help---
		If CONFIG_NSH_CONSOLE is set to y, then CONFIG_NSH_ALTCONDEV may
		also be selected to enable use of an alternate character device
		to support the NSH console. If CONFIG_NSH_ALTCONDEV is selected,
		then NSH_ALTSTDERR must be set to select the "stderr" device to
		support the NSH console.   This should be set to the quoted name
		of a write-able character driver such as:

			NSH_ALTSTDIN="/dev/ttyS1".

		This way the standard error output will go to "/dev/ttyS1".

endif # NSH_ALTCONDEV

config NSH_USBKBD
	bool "Use USB keyboard input"
	default n
	depends on NSH_CONSOLE && USBHOST_HIDKBD && !NSH_USBCONSOLE
	---help---
		Normally NSH uses the same device for stdin, stdout, and stderr.  By
		default, that device is /dev/console.  If this option is selected,
		then NSH will use a USB HID keyboard for stdin.  In this case, the
		keyboard is connected directly to the target (via a USB host
		interface) and the data from the keyboard will drive NSH.  NSH
		output (stdout and stderr) will still go to /dev/console.

if NSH_USBKBD

config NSH_USBKBD_DEVNAME
	string "USB keyboard device"
	default "/dev/kbda"
	---help---
		If NSH_USBKBD is set to 'y', then NSH_USBKBD_DEVNAME must also be
		set to select the USB keyboard device used to support the NSH
		console input.   This should be set to the quoted name of a read-
		able keyboard driver. Default: "/dev/kbda".

endif #NSH_USBKBD
endmenu # Console Configuration

menu "USB Device Trace Support"
	depends on USBDEV && (DEBUG_FEATURES || USBDEV_TRACE)

config NSH_USBDEV_TRACE
	bool "Enable Builtin USB Trace Support"
	default n
	---help---
		Enable builtin USB trace support in NSH.  If selected, buffered USB
		trace data will be presented each time a command is provided to NSH.
		The USB trace data will be sent to the console unless CONFIG_DEBUG_FEATURES
		set or unless you are using a USB console.  In those cases, the trace
		data will go to the SYSLOG device.

		If not enabled, the USB trace support can be provided by external
		logic such as nuttx/drivers/usbmonitor.

if NSH_USBDEV_TRACE

config NSH_USBDEV_TRACEINIT
	bool "Show initialization events"
	default n
	---help---
		Show initialization events

config NSH_USBDEV_TRACECLASS
	bool "Show class driver events"
	default n
	---help---
		Show class driver events

config NSH_USBDEV_TRACETRANSFERS
	bool "Show data transfer events"
	default n
	---help---
		Show data transfer events

config NSH_USBDEV_TRACECONTROLLER
	bool "Show controller events"
	default n
	---help---
		Show controller events

config NSH_USBDEV_TRACEINTERRUPTS
	bool "Show interrupt-related events"
	default n
	---help---
		Show interrupt-related events

endif # NSH_USBDEV_TRACE
endmenu # USB Device Trace Support

config NSH_ARCHINIT
	bool "Have architecture-specific initialization"
	default n
	select LIB_BOARDCTL
	---help---
		Set if your board provides architecture specific initialization
		via the board-interface function boardctl().  The boardctl()
		function will be called early in NSH initialization to allow
		board logic to do such things as configure MMC/SD slots.

menu "Networking Configuration"
	depends on NET

config NSH_NETINIT
	bool "Network initialization"
	default y
	depends on NET
	---help---
		This option enables/disables all network initialization in NSH.

if NSH_NETINIT

config NSH_NETLOCAL
	bool "Local network initialization"
	default n
	---help---
		If this option is selected, then NSH will only initialize the local
		attributes of the network:  The MAC address if needed and any IP
		addresses as needed.  More importantly, it will not do the following:

		- It will not bring the network up.  That can be done later with the
		  NSH ifup command.
		- It will not associate any wireless devices to an access point.
		- It will not attempt to obtain an IP address if DHCPC is selected.
		  This may be done later from the NSH command line with the
		  apps/system/dhcpc 'renew' command.
		- It will not start the NTPC daemon.  This may be done later from
		  the NSH command line with the apps/system/ntpc 'ntpcstart' command.

		This option permits you to divide the network configuration into two
		parts:  The local configuration of the network device and the dynamic
		configuration of the device in the network.  This may be important in
		an environment when, for example, you need to manually scan for
		available access points and associate the wireless driver with an
		access point.

config NSH_NETINIT_THREAD
	bool "Network initialization thread"
	default n
	depends on !DISABLE_PTHREAD && !NSH_NETLOCAL
	---help---
		NSH is brought up through a series of sequential initialization
		steps.  This includes networking. If the network is available on
		reset, then there is really no issue.  Negotiating the link will
		take only a second or so and the delay to the NSH prompt is
		normally acceptable.

		But if there is no network connected, then the start-up delay can
		be very long depending upon things like the particular PHY, driver
		timeout delay times and number of retries.  A failed negotiation
		can potentially take a very long time, perhaps as much as a
		minute... Long enough that you might think that the board would
		never come up!

		One solution is enabled by this option.  If NSH_NETINIT_THREAD
		is selected, the network bring-up will occur in parallel with
		NSH on a separate thread.  In this case, the NSH prompt will occur
		immediately with the network becoming available some time later (if
		if all).  This thread will terminate once it successfully initializes
		the network

		NOTES:  If no network is connected, the network bring-up will fail
		and the network initialization thread will simply exit.  There are
		no retries and no mechanism to know if the network initialization
		was successful.  Furthermore, there is currently no support for
		detecting loss of network connection.  Lots of things to do!

if NSH_NETINIT_THREAD

config NSH_NETINIT_MONITOR
	bool "Monitor link state"
	default n
	depends on ARCH_PHY_INTERRUPT && NETDEV_PHY_IOCTL && NET_UDP && !DISABLE_SIGNALS
	---help---
		By default the net initialization thread will bring-up the network
		then exit, freeing all of the resources that it required.  This is a
		good behavior for systems with limited memory.

		If this option is selected, however, then the network initialization
		thread will persist forever; it will monitor the network status.  In
		the event that the network goes down (for example, if a cable is
		removed), then the thread will monitor the link status and
		attempt to bring the network back up.  In this case the resources
		required for network initialization are never released.

if NSH_NETINIT_MONITOR

config NSH_NETINIT_SIGNO
	int "Notification signal number"
	default 18
	---help---
		The network monitor logic will receive signals when there is any
		change in the link status.  This setting may be used to customize
		that signal number in order to avoid conflicts.

config NSH_NETINIT_RETRYMSEC
	int "Network bring-up retry period (msec)"
	default 2000
	---help---
		When the network is down, the initialization thread will periodically
		try to bring the network up.  This can be a time consuming operation
		so is done only periodically with that period specified by this
		selection in milliseconds.

endif # NSH_NETINIT_MONITOR

config NSH_NETINIT_THREAD_STACKSIZE
	int "Network initialization thread stack size"
	default 1568

config NSH_NETINIT_THREAD_PRIORITY
	int "Network initialization thread priority"
	default 80
	---help---
		This should be set to a priority lower than most tasks.  The network
		PHY polling is CPU intensive and can interfere with the usability of
		of threads competing for CPU bandwidth.

endif # NSH_NETINIT_THREAD

config NSH_NETINIT_DEBUG
	bool "Network init debug"
	default n
	depends on DEBUG_FEATURES
	---help---
		Normally debug output is controlled by DEBUG_NET.  However, that
		will generate a LOT of debug output, especially if CONFIG_DEBUG_INFO is
		also selected.  This option is intended to force vervose debug
		output from the NSH network initialization logic even if CONFIG_DEBUG_NET
		or CONFIG_DEBUG_INFO are not selected.  This allows for focused, unit-
		level debug of the NSH network initialization logic.

# No IP address if 6LOWPAN selected; but Ethernet has precedence.

menu "IP Address Configuration"
	depends on NET_ETHERNET || !NET_6LOWPAN

config NSH_DHCPC
	bool "Use DHCP to get IP address"
	default n
	depends on NETUTILS_DHCPC
	---help---
		Obtain the IP address via DHCP.

		Per RFC2131 (p. 9), the DHCP client must be prepared to receive DHCP
		messages of up to 576 bytes (excluding Ethernet, IP, or UDP headers and FCS).

if NET_IPv4

comment "IPv4 Addresses"

config NSH_IPADDR
	hex "Target IPv4 address"
	default 0x0a000002
	depends on !NSH_DHCPC
	---help---
		If NSH_DHCPC is NOT set, then the static IP address must be provided.
		This is a 32-bit integer value in host order.  So, as an example,
		0x0a000002 would be 10.0.0.2.

config NSH_DRIPADDR
	hex "Router IPv4 address"
	default 0x0a000001
	---help---
		Default router IP address (aka, Gateway).  This is a 32-bit integer
		value in host order.  So, as an example, 0x0a000001 would be 10.0.0.1.

config NSH_NETMASK
	hex "IPv4 Network mask"
	default 0xffffff00
	---help---
		Network mask.  This is a 32-bit integer value in host order.  So, as
		an example, 0xffffff00 would be 255.255.255.0.

endif # NET_IPv4

if NET_IPv6 && !NET_ICMPv6_AUTOCONF

comment "Target IPv6 address"

config NSH_IPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the first of the 8-values.  The default for
		all eight values is fc00::2.

config NSH_IPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the second of the 8-values.  The default for
		all eight values is fc00::2.

config NSH_IPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the third of the 8-values.  The default for
		all eight values is fc00::2.

config NSH_IPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the fourth of the 8-values.  The default for
		all eight values is fc00::2.

config NSH_IPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the fifth of the 8-values.  The default for
		all eight values is fc00::2.

config NSH_IPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the sixth of the 8-values.  The default for
		all eight values is fc00::2.

config NSH_IPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the seventh of the 8-values.  The default for
		all eight values is fc00::2.

config NSH_IPv6ADDR_8
	hex "[7]"
	default 0x0002
	range 0x0 0xffff
	---help---
		If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
		provided. This is a 16-bit integer value in host order.  Each of the
		eight values forming the full IP address must be specified
		individually.  This is the last of the 8-values.  The default for
		all eight values is fc00::2.

comment "Router IPv6 address"

config NSH_DRIPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the first of the
		8-values.  The default for all eight values is fc00::1.

config NSH_DRIPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the second of the
		8-values.  The default for all eight values is fc00::1.

config NSH_DRIPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the third of the
		8-values.  The default for all eight values is fc00::1.

config NSH_DRIPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fourth of the
		8-values.  The default for all eight values is fc00::1.

config NSH_DRIPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fifth of the
		8-values.  The default for all eight values is fc00::1.

config NSH_DRIPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the sixth of the
		8-values.  The default for all eight values is fc00::1.

config NSH_DRIPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the seventh of the
		8-values.  The default for all eight values is fc00::1.

config NSH_DRIPv6ADDR_8
	hex "[7]"
	default 0x0001
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the last of the
		8-values.  The default for all eight values is fc00::1.

comment "IPv6 Network mask"

config NSH_IPv6NETMASK_1
	hex "[0]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the first of the 8-values.  The default for
		all eight values is fe00::0.

config NSH_IPv6NETMASK_2
	hex "[1]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the second of the 8-values.  The default for
		all eight values is fe00::0.

config NSH_IPv6NETMASK_3
	hex "[2]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the third of the 8-values.  The default for
		all eight values is fe00::0.

config NSH_IPv6NETMASK_4
	hex "[3]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fourth of the 8-values.  The default for
		all eight values is fe00::0.

config NSH_IPv6NETMASK_5
	hex "[4]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fifth of the 8-values.  The default for
		all eight values is fe00::0.

config NSH_IPv6NETMASK_6
	hex "[5]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the sixth of the 8-values.  The default for
		all eight values is fe00::0.

config NSH_IPv6NETMASK_7
	hex "[6]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the seventh of the 8-values.  The default for
		all eight values is fe00::0.

config NSH_IPv6NETMASK_8
	hex "[7]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the eighth of the 8-values.  The default for
		all eight values is fe00::0.

endif # NET_IPv6 && !NET_ICMPv6_AUTOCONF
endmenu # IP Address Configuration

config NSH_DNS
	bool "Use DNS"
	default n
	depends on NSH_LIBRARY && NETDB_DNSCLIENT
	---help---
		Configure to use a DNS.

config NSH_DNSIPADDR
	hex "DNS IP address"
	default 0xa0000001
	depends on NSH_DNS
	---help---
		Configure the DNS address.  This is a 32-bit integer value in host
		order.  So, as an example, 0xa0000001 would be 10.0.0.1.

config NSH_NOMAC
	bool "Hardware has no MAC address"
	default n
	depends on NSH_LIBRARY && NET
	---help---
		Set if your Ethernet hardware has no built-in MAC address.
		If set, a bogus MAC will be assigned.

if NSH_NOMAC

choice
	prompt "MAC address selection"
	default NSH_SWMAC
	---help---
		If the hardware as no MAC address, then NSH must assign an address
		to the hardware before it brings the network up.  This choice allows
		you select the source of that MAC address.

config NSH_SWMAC
	bool "Fixed address"
	---help---
		With this choice, you can assign a fixed MAC address determined by
		a NuttX configuration option.

endchoice # MAC address selection

config NSH_MACADDR
	hex "Fixed MAC address"
	default 0x00e0deadbeef if NET_ETHERNET
	default 0x00fade00deadbeef if !NET_ETHERNET && NET_6LOWPAN
	depends on NSH_SWMAC && (NET_ETHERNET || NET_6LOWPAN)
	---help---
		If the hardware has no built-in MAC address and if the NSH_SWMAC
		option is selected, then the fixed, software-assigned MAC address
		MAC address must provided with this selection.

endif # NSH_NOMAC

menu "WAPI Configuration"
	depends on NET && WIRELESS_WAPI

config NSH_WAPI_STAMODE
	int "Wireless mode of operation"
	default 2
	range 0 8
	---help---
		Mode of operation.  See the IW_MODE_* definitions in
		include/nuttx/wireless/wireless.  The default value corresponds to
		IW_MODE_INFRA

config NSH_WAPI_AUTHWPA
	hex "IW_AUTH_WPA_VERSION value"
	default 0x00000004
	range 0x00000001 0x00000004
	---help---
		IW_AUTH_WPA_VERSION values.  See the IW_AUTH_WPA_VERSION_* definitions
		in include/nuttx/wireless/wireless.  The default value corresponds to
		IW_AUTH_WPA_VERSION_WPA2.  NOTE that this is a bit-encoded field.  The
		only valid values are 0x00000001, 0x00000002, and 0x00000004

config NSH_WAPI_CIPHERMODE
	hex "IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values"
	default 0x00000008
	range 0x00000001 0x00000010
	---help---
		IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values. See the
		IW_AUTH_CIPHER_* definitions in include/nuttx/wireless/wireless.
		The default value corresponds to IW_AUTH_CIPHER_CCMP.  NOTE that
		this is a bit-encoded field.  The only valid values are 0x00000001,
		0x00000002,0x00000004, ... 0x00000010

config NSH_WAPI_ALG
	int "Algorithm"
	default 3
	range 0 13
	---help---
		Algorithm.  See enum wpa_alg_e in apps/include/wireless/wapi.h.  The
		default corresponds to WPA_ALG_CCMP.

config NSH_WAPI_SSID
	string "SSID"
	default "myApSSID"

config NSH_WAPI_PASSPHRASE
	string "Passprhase"
	default "mySSIDpassphrase"

endmenu # WAPI Configuration
endif # NSH_NETINIT
endmenu # Networking Configuration"

menu "Telnet Configuration"
	depends on NETUTILS_TELNETD

config NSH_TELNET
	bool "Use Telnet console"
	default n if DEFAULT_SMALL
	default y if !DEFAULT_SMALL
	depends on NETUTILS_TELNETD
	---help---
		If NSH_TELNET is set to 'y', then a TELENET
		server front-end is selected.  When this option is provided,
		you may log into NuttX remotely using telnet in order to
		access NSH.

if NSH_TELNET

config NSH_TELNETD_PORT
	int "Telnet port number"
	default 23
	---help---
		The telnet daemon will listen on this TCP port number for connections.
		Default: 23

config NSH_TELNETD_DAEMONPRIO
	int "Telnet daemon priority"
	default 100
	---help---
		Priority of the Telnet daemon. Default: 100

config NSH_TELNETD_DAEMONSTACKSIZE
	int "Telnet daemon stack size"
	default 2048
	---help---
		Stack size allocated for the Telnet daemon. Default: 2048

config NSH_TELNETD_CLIENTPRIO
	int "Telnet client priority"
	default 100
	---help---
		Priority of the Telnet client. Default: 100

config NSH_TELNETD_CLIENTSTACKSIZE
	int "Telnet client stack size"
	default 2048
	---help---
		Stack size allocated for the Telnet client. Default: 2048

config NSH_IOBUFFER_SIZE
	int "Telnet I/O buffer size"
	default 512
	---help---
		Determines the size of the I/O buffer to use for sending/
		receiving TELNET commands/reponses.  Default: 512

endif # NSH_TELNET
endmenu # Telnet Configuration

config NSH_LOGIN
	bool
	default n

config NSH_CONSOLE_LOGIN
	bool "Console Login"
	default n
	select NSH_LOGIN
	---help---
		If defined, then the console user will be required to provide a
		username and password to start the NSH shell.

config NSH_TELNET_LOGIN
	bool "Telnet Login"
	default n
	depends on NSH_TELNET
	select NSH_LOGIN
	---help---
		If defined, then the Telnet user will be required to provide a
		username and password to start the NSH shell.

if NSH_LOGIN

choice
	prompt "Verification method"
	default NSH_LOGIN_PASSWD if FSUTILS_PASSWD
	default NSH_LOGIN_FIXED if !FSUTILS_PASSWD

config NSH_LOGIN_FIXED
	bool "Fixed username/password"
	---help---
		Verify user credentials by matching to fixed username and password
		strings

config NSH_LOGIN_PLATFORM
	bool "Platform username/password"
	---help---
		Call a platform-specific function to perform the verification of
		user credentials.  In this case, the platform-specific logic must
		provide a function with the following prototype:

			int platform_user_verify(FAR const char *username, FAR const char *password);

		which is prototyped an described in apps/include/nshlib/nshlib.h and
		which may be included like:

			#include "nshlib/nshlib.h"

		An appropriate place to implement this function might be in the
		directory apps/platform/<board>.

config NSH_LOGIN_PASSWD
	bool "Encrypted password file"
	depends on FSUTILS_PASSWD
	---help---
		Use the content of an encrypted password file to verify user
		credentials.  This option requires that you have selected
		CONFIG_FSUTILS_PASSWD to enable the access methods of
		apps/fsutils/passwd.

endchoice # Verification method

config NSH_LOGIN_USERNAME
	string "Login username"
	default "admin"
	depends on !NSH_LOGIN_PASSWD
	---help---
		Login user name.  Default: "admin"

config NSH_LOGIN_PASSWORD
	string "Login password"
	default "Administrator"
	depends on !NSH_LOGIN_PASSWD
	---help---
		Login password:  Default: "Administrator"

config NSH_LOGIN_FAILDELAY
	int "Login failure delay"
	default 0
	---help---
		Login failure delay in milliseconds.  The system will pause this
		amount of time after each failed login attempt in order to
		discourage people from cracking the password by brute force.  The
		value zero may be supplied to disable the delay.

config NSH_LOGIN_FAILCOUNT
	int "Login retry count"
	default 3
	---help---
		Number of login retry attempts.

endif # NSH_LOGIN
endif # NSH_LIBRARY
endmenu # NSH Library