sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
01532a45d6
nuttx-apps/system/usbmsc/usbmsc_main.c
Alin Jerpelea 01532a45d6 system: fix relative path CI error 
error: Path relative to repository other than nuttx must begin with the root directory
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-06-16 09:03:06 -05:00

627 lines
18 KiB
C
Raw Blame History

/****************************************************************************
* apps/system/usbmsc/usbmsc_main.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <sys/boardctl.h>
#include <stdio.h>
#include <stdbool.h>
#include <stdlib.h>
#include <malloc.h>
#include <unistd.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbmsc.h>
#include <nuttx/usb/usbdev_trace.h>
#include "usbmsc.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifdef CONFIG_SYSTEM_USBMSC_TRACEINIT
# define TRACE_INIT_BITS (TRACE_INIT_BIT)
#else
# define TRACE_INIT_BITS (0)
#endif
#define TRACE_ERROR_BITS (TRACE_DEVERROR_BIT|TRACE_CLSERROR_BIT)
#ifdef CONFIG_SYSTEM_USBMSC_TRACECLASS
# define TRACE_CLASS_BITS (TRACE_CLASS_BIT|TRACE_CLASSAPI_BIT|TRACE_CLASSSTATE_BIT)
#else
# define TRACE_CLASS_BITS (0)
#endif
#ifdef CONFIG_SYSTEM_USBMSC_TRACETRANSFERS
# define TRACE_TRANSFER_BITS (TRACE_OUTREQQUEUED_BIT|TRACE_INREQQUEUED_BIT|TRACE_READ_BIT|\
TRACE_WRITE_BIT|TRACE_COMPLETE_BIT)
#else
# define TRACE_TRANSFER_BITS (0)
#endif
#ifdef CONFIG_SYSTEM_USBMSC_TRACECONTROLLER
# define TRACE_CONTROLLER_BITS (TRACE_EP_BIT|TRACE_DEV_BIT)
#else
# define TRACE_CONTROLLER_BITS (0)
#endif
#ifdef CONFIG_SYSTEM_USBMSC_TRACEINTERRUPTS
# define TRACE_INTERRUPT_BITS (TRACE_INTENTRY_BIT|TRACE_INTDECODE_BIT|TRACE_INTEXIT_BIT)
#else
# define TRACE_INTERRUPT_BITS (0)
#endif
#define TRACE_BITSET (TRACE_INIT_BITS|TRACE_ERROR_BITS|TRACE_CLASS_BITS|\
TRACE_TRANSFER_BITS|TRACE_CONTROLLER_BITS|TRACE_INTERRUPT_BITS)
/****************************************************************************
* Private Data
****************************************************************************/
/* All global variables used by this add-on are packed into a structure in
* order to avoid name collisions.
*/
struct usbmsc_state_s g_usbmsc;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: show_memory_usage
****************************************************************************/
#ifdef CONFIG_SYSTEM_USBMSC_DEBUGMM
static void show_memory_usage(struct mallinfo *mmbefore,
struct mallinfo *mmafter)
{
int diff;
printf(" total used free largest\n");
printf("Before:%11d%11d%11d%11d\n",
mmbefore->arena, mmbefore->uordblks, mmbefore->fordblks,
mmbefore->mxordblk);
printf("After: %11d%11d%11d%11d\n",
mmafter->arena, mmafter->uordblks, mmafter->fordblks,
mmafter->mxordblk);
diff = mmbefore->uordblks - mmafter->uordblks;
if (diff < 0)
{
printf("Change:%11d allocated\n", -diff);
}
else if (diff > 0)
{
printf("Change:%11d freed\n", diff);
}
}
#else
# define show_memory_usage(mm1, mm2)
#endif
/****************************************************************************
* Name: check_test_memory_usage
****************************************************************************/
#ifdef CONFIG_SYSTEM_USBMSC_DEBUGMM
static void check_test_memory_usage(FAR const char *msg)
{
/* Get the current memory usage */
g_usbmsc.mmcurrent = mallinfo();
/* Show the change from the previous time */
printf("\%s:\n", msg);
show_memory_usage(&g_usbmsc.mmprevious, &g_usbmsc.mmcurrent);
/* Set up for the next test */
g_usbmsc.mmprevious = g_usbmsc.mmcurrent;
}
#else
# define check_test_memory_usage(msg)
#endif
/****************************************************************************
* Name: check_test_memory_usage
****************************************************************************/
#ifdef CONFIG_SYSTEM_USBMSC_DEBUGMM
static void final_memory_usage(FAR const char *msg)
{
/* Get the current memory usage */
g_usbmsc.mmcurrent = mallinfo();
/* Show the change from the previous time */
printf("\n%s:\n", msg);
show_memory_usage(&g_usbmsc.mmstart, &g_usbmsc.mmcurrent);
}
#else
# define final_memory_usage(msg)
#endif
/****************************************************************************
* Name: usbmsc_enumerate
****************************************************************************/
#ifdef CONFIG_SYSTEM_USBMSC_TRACE
static int usbmsc_enumerate(struct usbtrace_s *trace, void *arg)
{
switch (trace->event)
{
case TRACE_DEVINIT:
printf("USB controller initialization: %04x\n", trace->value);
break;
case TRACE_DEVUNINIT:
printf("USB controller un-initialization: %04x\n", trace->value);
break;
case TRACE_DEVREGISTER:
printf("usbdev_register(): %04x\n", trace->value);
break;
case TRACE_DEVUNREGISTER:
printf("usbdev_unregister(): %04x\n", trace->value);
break;
case TRACE_EPCONFIGURE:
printf("Endpoint configure(): %04x\n", trace->value);
break;
case TRACE_EPDISABLE:
printf("Endpoint disable(): %04x\n", trace->value);
break;
case TRACE_EPALLOCREQ:
printf("Endpoint allocreq(): %04x\n", trace->value);
break;
case TRACE_EPFREEREQ:
printf("Endpoint freereq(): %04x\n", trace->value);
break;
case TRACE_EPALLOCBUFFER:
printf("Endpoint allocbuffer(): %04x\n", trace->value);
break;
case TRACE_EPFREEBUFFER:
printf("Endpoint freebuffer(): %04x\n", trace->value);
break;
case TRACE_EPSUBMIT:
printf("Endpoint submit(): %04x\n", trace->value);
break;
case TRACE_EPCANCEL:
printf("Endpoint cancel(): %04x\n", trace->value);
break;
case TRACE_EPSTALL:
printf("Endpoint stall(true): %04x\n", trace->value);
break;
case TRACE_EPRESUME:
printf("Endpoint stall(false): %04x\n", trace->value);
break;
case TRACE_DEVALLOCEP:
printf("Device allocep(): %04x\n", trace->value);
break;
case TRACE_DEVFREEEP:
printf("Device freeep(): %04x\n", trace->value);
break;
case TRACE_DEVGETFRAME:
printf("Device getframe(): %04x\n", trace->value);
break;
case TRACE_DEVWAKEUP:
printf("Device wakeup(): %04x\n", trace->value);
break;
case TRACE_DEVSELFPOWERED:
printf("Device selfpowered(): %04x\n", trace->value);
break;
case TRACE_DEVPULLUP:
printf("Device pullup(): %04x\n", trace->value);
break;
case TRACE_CLASSBIND:
printf("Class bind(): %04x\n", trace->value);
break;
case TRACE_CLASSUNBIND:
printf("Class unbind(): %04x\n", trace->value);
break;
case TRACE_CLASSDISCONNECT:
printf("Class disconnect(): %04x\n", trace->value);
break;
case TRACE_CLASSSETUP:
printf("Class setup(): %04x\n", trace->value);
break;
case TRACE_CLASSSUSPEND:
printf("Class suspend(): %04x\n", trace->value);
break;
case TRACE_CLASSRESUME:
printf("Class resume(): %04x\n", trace->value);
break;
case TRACE_CLASSRDCOMPLETE:
printf("Class RD request complete: %04x\n", trace->value);
break;
case TRACE_CLASSWRCOMPLETE:
printf("Class WR request complete: %04x\n", trace->value);
break;
default:
switch (TRACE_ID(trace->event))
{
case TRACE_CLASSAPI_ID: /* Other class driver system API calls */
printf("Class API call %d: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_CLASSSTATE_ID: /* Track class driver state changes */
printf("Class state %d: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_INTENTRY_ID: /* Interrupt handler entry */
printf("Interrupt %d entry: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_INTDECODE_ID: /* Decoded interrupt trace->event */
printf("Interrupt decode %d: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_INTEXIT_ID: /* Interrupt handler exit */
printf("Interrupt %d exit: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_OUTREQQUEUED_ID: /* Request queued for OUT endpoint */
printf("EP%d OUT request queued: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_INREQQUEUED_ID: /* Request queued for IN endpoint */
printf("EP%d IN request queued: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_READ_ID: /* Read (OUT) action */
printf("EP%d OUT read: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_WRITE_ID: /* Write (IN) action */
printf("EP%d IN write: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_COMPLETE_ID: /* Request completed */
printf("EP%d request complete: %04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_DEVERROR_ID: /* USB controller driver error event */
printf("Controller error: %02x:%04x\n",
TRACE_DATA(trace->event), trace->value);
break;
case TRACE_CLSERROR_ID: /* USB class driver error event */
printf("Class error: %02x:%04x\n",
TRACE_DATA(trace->event), trace->value);
break;
default:
printf("Unrecognized event: %02x:%02x:%04x\n",
TRACE_ID(trace->event) >> 8,
TRACE_DATA(trace->event), trace->value);
break;
}
}
return OK;
}
#endif
/****************************************************************************
* Name: usbmsc_disconnect
*
* Description:
* Disconnect the USB MSC device
*
* Input Parameters:
* handle - Handle of the connect USB MSC device
*
* Returned Value:
* None
*
****************************************************************************/
static void usbmsc_disconnect(FAR void *handle)
{
struct boardioc_usbdev_ctrl_s ctrl;
ctrl.usbdev = BOARDIOC_USBDEV_MSC;
ctrl.action = BOARDIOC_USBDEV_DISCONNECT;
ctrl.instance = 0;
ctrl.handle = &handle;
boardctl(BOARDIOC_USBDEV_CONTROL, (uintptr_t)&ctrl);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* msconn_main
*
* Description:
* This is the main program that configures the USB mass storage device
* and exports the LUN(s). If CONFIG_NSH_BUILTIN_APPS is defined
* in the NuttX configuration, then this program can be executed by
* entering the "msconn" command at the NSH console.
*
****************************************************************************/
int main(int argc, FAR char *argv[])
{
struct boardioc_usbdev_ctrl_s ctrl;
FAR void *handle = NULL;
int ret;
/* If this program is implemented as the NSH 'msconn' command, then we
* need to do a little error checking to assure that we are not being
* called re-entrantly.
*/
/* Check if there is a non-NULL USB mass storage device handle (meaning
* that the USB mass storage device is already configured).
*/
if (g_usbmsc.mshandle)
{
printf("mcsonn_main: ERROR: Already connected\n");
return EXIT_FAILURE;
}
#ifdef CONFIG_SYSTEM_USBMSC_DEBUGMM
g_usbmsc.mmstart = mallinfo();
g_usbmsc.mmprevious = g_usbmsc.mmstart;
#endif
/* Initialize USB trace output IDs */
#ifdef CONFIG_SYSTEM_USBMSC_TRACE
usbtrace_enable(TRACE_BITSET);
check_test_memory_usage("After usbtrace_enable()");
#endif
/* Register block drivers (architecture-specific) */
printf("mcsonn_main: Creating block drivers\n");
ctrl.usbdev = BOARDIOC_USBDEV_MSC;
ctrl.action = BOARDIOC_USBDEV_INITIALIZE;
ctrl.instance = 0;
ctrl.handle = NULL;
ret = boardctl(BOARDIOC_USBDEV_CONTROL, (uintptr_t)&ctrl);
if (ret < 0)
{
printf("mcsonn_main: boardctl(BOARDIOC_USBDEV_CONTROL) failed: %d\n",
-ret);
return EXIT_FAILURE;
}
check_test_memory_usage("After boardctl(BOARDIOC_USBDEV_CONTROL)");
/* Then exports the LUN(s) */
printf("mcsonn_main: Configuring with NLUNS=%d\n",
CONFIG_SYSTEM_USBMSC_NLUNS);
ret = usbmsc_configure(CONFIG_SYSTEM_USBMSC_NLUNS, &handle);
if (ret < 0)
{
printf("mcsonn_main: usbmsc_configure failed: %d\n", -ret);
if (handle)
{
usbmsc_disconnect(handle);
}
return EXIT_FAILURE;
}
printf("mcsonn_main: handle=%p\n", handle);
check_test_memory_usage("After usbmsc_configure()");
printf("mcsonn_main: Bind LUN=0 to %s\n",
CONFIG_SYSTEM_USBMSC_DEVPATH1);
#ifdef CONFIG_SYSTEM_USBMSC_WRITEPROTECT1
ret = usbmsc_bindlun(handle, CONFIG_SYSTEM_USBMSC_DEVPATH1, 0, 0, 0,
true);
#else
ret = usbmsc_bindlun(handle, CONFIG_SYSTEM_USBMSC_DEVPATH1, 0, 0, 0,
false);
#endif
if (ret < 0)
{
printf("mcsonn_main: usbmsc_bindlun failed for LUN 1 using %s: %d\n",
CONFIG_SYSTEM_USBMSC_DEVPATH1, -ret);
usbmsc_disconnect(handle);
return EXIT_FAILURE;
}
check_test_memory_usage("After usbmsc_bindlun()");
#if CONFIG_SYSTEM_USBMSC_NLUNS > 1
printf("mcsonn_main: Bind LUN=1 to %s\n",
CONFIG_SYSTEM_USBMSC_DEVPATH2);
#ifdef CONFIG_SYSTEM_USBMSC_WRITEPROTECT2
ret = usbmsc_bindlun(handle, CONFIG_SYSTEM_USBMSC_DEVPATH2, 1, 0, 0,
true);
#else
ret = usbmsc_bindlun(handle, CONFIG_SYSTEM_USBMSC_DEVPATH2, 1, 0, 0,
false);
#endif
if (ret < 0)
{
printf("mcsonn_main: usbmsc_bindlun failed for LUN 2 using %s: %d\n",
CONFIG_SYSTEM_USBMSC_DEVPATH2, -ret);
usbmsc_disconnect(handle);
return EXIT_FAILURE;
}
check_test_memory_usage("After usbmsc_bindlun() #2");
#if CONFIG_SYSTEM_USBMSC_NLUNS > 2
printf("mcsonn_main: Bind LUN=2 to %s\n",
CONFIG_SYSTEM_USBMSC_DEVPATH3);
#ifdef CONFIG_SYSTEM_USBMSC_WRITEPROTECT3
ret = usbmsc_bindlun(handle, CONFIG_SYSTEM_USBMSC_DEVPATH3, 2, 0, 0,
true);
#else
ret = usbmsc_bindlun(handle, CONFIG_SYSTEM_USBMSC_DEVPATH3, 2, 0, 0,
false);
#endif
if (ret < 0)
{
printf("mcsonn_main: usbmsc_bindlun failed for LUN 3 using %s: %d\n",
CONFIG_SYSTEM_USBMSC_DEVPATH3, -ret);
usbmsc_disconnect(handle);
return EXIT_FAILURE;
}
check_test_memory_usage("After usbmsc_bindlun() #3");
#endif
#endif
ret = usbmsc_exportluns(handle);
if (ret < 0)
{
printf("mcsonn_main: usbmsc_exportluns failed: %d\n", -ret);
usbmsc_disconnect(handle);
return EXIT_FAILURE;
}
check_test_memory_usage("After usbmsc_exportluns()");
/* Return the USB mass storage device handle so it can be used by the
* 'msconn' command.
*/
printf("mcsonn_main: Connected\n");
g_usbmsc.mshandle = handle;
check_test_memory_usage("After MS connection");
#ifdef CONFIG_SYSTEM_USBMSC_TRACE
/* This thread will hang around and monitor the USB storage activity */
for (; ; )
{
fflush(stdout);
sleep(5);
printf("\nmcsonn_main: USB TRACE DATA:\n");
ret = usbtrace_enumerate(usbmsc_enumerate, NULL);
if (ret < 0)
{
printf("mcsonn_main: usbtrace_enumerate failed: %d\n", -ret);
usbmsc_disconnect(handle);
return EXIT_FAILURE;
}
check_test_memory_usage("After usbtrace_enumerate()");
}
#endif
return EXIT_SUCCESS;
}
/****************************************************************************
* msdis_main
*
* Description:
* This is a program entry point that will disconnect the USB mass storage
* device. This program is only available if CONFIG_SYSTEM_USBMSC == y
* is defined in the NuttX configuration. In that case, this program can
* be executed by entering the "msdis" command at the NSH console.
*
****************************************************************************/
int msdis_main(int argc, char *argv[])
{
/* First check if the USB mass storage device is already connected */
if (!g_usbmsc.mshandle)
{
printf("msdis: ERROR: Not connected\n");
return EXIT_FAILURE;
}
check_test_memory_usage("Since MS connection");
/* Then disconnect the device and uninitialize the USB mass storage
* driver.
*/
usbmsc_disconnect(g_usbmsc.mshandle);
g_usbmsc.mshandle = NULL;
printf("msdis: Disconnected\n");
check_test_memory_usage("After usbmsc_disconnect()");
/* Dump debug memory usage */
final_memory_usage("Final memory usage");
return EXIT_SUCCESS;
}
Reference in New Issue View Git Blame Copy Permalink