nuttx-apps

History

Xiang Xiao 4431d770b4 .gitignore: Add more entries found during prcheck testing Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>		2020-04-19 10:29:34 -06:00
..
.gitignore	.gitignore: Add more entries found during prcheck testing	2020-04-19 10:29:34 -06:00
flowc_host.c
flowc_mktestdata.c	Remove trailing spaces at the end of lines.	2018-08-13 07:47:26 -06:00
flowc_receiver.c	apps/examples/flowc: Small improvement to break line if more than 80 . were printed	2017-09-27 12:56:47 -06:00
flowc_sender.c
flowc_target1.c	Application.mk and main.c files: Change builtin's entry point from main to xxx_main by macro expansion. This change make the entry point fully compliant with POSIX/ANSI standard.	2019-10-06 06:14:56 -06:00
flowc_target2.c	Application.mk and main.c files: Change builtin's entry point from main to xxx_main by macro expansion. This change make the entry point fully compliant with POSIX/ANSI standard.	2019-10-06 06:14:56 -06:00
flowc.h
Kconfig	Change the defaults of stack size configs to DEFAULT_TASK_STACKSIZE	2020-03-27 02:43:11 -05:00
Make.defs	apps/: In all Make.def files, append to CONFIGURED_APPS patch with the absolute path.	2019-10-17 11:33:59 -06:00
Makefile	apps/examples/flowc, tcpblaster, and udpblaster: Back out more changes that broke the makefiles fixed by commit `2830892424`. This applies the same fix to other Makefiles that follow that same pattern and seem to have the same breakage.	2019-10-18 16:47:57 -06:00
README.txt	apps/examples/flowc: Rename README,.txt to README.txt	2017-09-27 12:52:41 -06:00
testdata.dat	apps/examples/flowc: Fix some errors in receiver's verificationg logic. Add a 'canned' data file so that we don't need to deal with the sender program; we can just 'cat' the canned data file.	2017-09-26 13:13:34 -06:00

README.txt

General Usage Instructions:

1. The receiver side enter, start the receiver program.   The receiver
   is now waiting to receive data on the configured serial port

2. On the sender side start the sender program.  This will send data to
   the receiver which will verify that no data is lost.

   On Linux, you can alternatively do:

     $ stty -F /dev/ttyACM0 crtscts
     $ cat testdata.dat >/dev/ttyACM0

   where you need to replace /dev/ttyACM0 with your selected serial
   device.