nuttx-apps/graphics/tiff/tiff_finalize.c
simbit18 1707be3977 graphics: Fix nxstyle errors
error: Bad alignment
error: Right brace must be followed by a blank line
error: Long line found
2023-05-03 17:35:05 +08:00

435 lines
11 KiB
C

/****************************************************************************
* apps/graphics/tiff/tiff_finalize.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <unistd.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include "graphics/tiff.h"
#include "tiff_internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: tiff_readifdentry
*
* Description:
* Read the IFD entry at the specified offset.
*
* Input Parameters:
* fd - File descriptor to rad from
* offset - Offset to read from
* ifdentry - Location to read the data
*
* Returned Value:
* Zero (OK) on success. A negated errno value on failure.
*
****************************************************************************/
static int tiff_readifdentry(int fd, off_t offset,
FAR struct tiff_ifdentry_s *ifdentry)
{
off_t newoffs;
ssize_t nbytes;
/* Seek to the read position */
newoffs = lseek(fd, offset, SEEK_SET);
if (newoffs == (off_t)-1)
{
return -errno;
}
/* Then read the IFD entry. Anything returned by tiff_read other than the
* size of the IFD entry would be an error.
*/
nbytes = tiff_read(fd, ifdentry, SIZEOF_IFD_ENTRY);
return nbytes == SIZEOF_IFD_ENTRY ? OK : -ENOSPC;
}
/****************************************************************************
* Name: tiff_writeifdentry
*
* Description:
* Write the IFD entry at the specified offset.
*
* Input Parameters:
* fd - File descriptor to rad from
* offset - Offset to read from
* ifdentry - Location to read the data
*
* Returned Value:
* Zero (OK) on success. A negated errno value on failure.
*
****************************************************************************/
static int tiff_writeifdentry(int fd, off_t offset,
FAR struct tiff_ifdentry_s *ifdentry)
{
off_t newoffs;
/* Seek to the write position */
newoffs = lseek(fd, offset, SEEK_SET);
if (newoffs == (off_t)-1)
{
return -errno;
}
/* Then write the IFD entry */
return tiff_write(fd, ifdentry, SIZEOF_IFD_ENTRY);
}
/****************************************************************************
* Name: tiff_cleanup
*
* Description:
* Normal clean-up after completion of the TIFF file creation
*
* Input Parameters:
* info - A pointer to the caller allocated parameter passing/TIFF
* state instance.
*
* Returned Value:
* None
*
****************************************************************************/
static void tiff_cleanup(FAR struct tiff_info_s *info)
{
/* Close all opened files */
if (info->outfd >= 0)
{
close(info->outfd);
}
info->outfd = -1;
if (info->tmp1fd >= 0)
{
close(info->tmp1fd);
}
info->tmp1fd = -1;
if (info->tmp2fd >= 0)
{
close(info->tmp2fd);
}
info->tmp2fd = -1;
/* And remove the temporary files */
unlink(info->tmpfile1);
unlink(info->tmpfile2);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: tiff_finalize
*
* Description:
* Finalize the TIFF output file, completing the TIFF file creation steps.
*
* Input Parameters:
* info - A pointer to the caller allocated parameter passing/TIFF state
* instance.
*
* Returned Value:
* Zero (OK) on success. A negated errno value on failure.
*
****************************************************************************/
int tiff_finalize(FAR struct tiff_info_s *info)
{
struct tiff_ifdentry_s ifdentry;
FAR uint8_t *ptr;
size_t maxoffsets;
#ifdef CONFIG_DEBUG_GRAPHICS
size_t total;
#endif
off_t offset;
int ret;
int i;
int j;
/* Put all of the pieces together to create the final output file.
* There are three pieces:
*
* 1) outfile: The partial output file containing the header, IFD and strip
* counts. This includes the StripOffsets and StripByteCounts that need
* to be updated. Size=outsize;
* 2) tmpfile1: This contains the offsets into tmpfile3 for each strip.
* The size of this file is tmp1size. These offsets are relative to the
* beginning of tmpfile3 and need to be offset by outsize+tmp1size.
* 3) tmpfile3: The strip data. Size is tmp2size. This is raw image data;
* no fixups are required.
*/
DEBUGASSERT(info && info->outfd >= 0 &&
info->tmp1fd >= 0 && info->tmp2fd >= 0);
DEBUGASSERT((info->outsize & 3) == 0 && (info->tmp1size & 3) == 0);
/* Fix-up the count value in the StripByteCounts IFD entry in the outfile.
* The actual number of strips was unknown at the time that the IFD entry
* was written.
*/
ret = tiff_readifdentry(info->outfd, info->filefmt->sbcifdoffset,
&ifdentry);
if (ret < 0)
{
goto errout;
}
tiff_put32(ifdentry.count, info->nstrips);
ret = tiff_writeifdentry(info->outfd, info->filefmt->sbcifdoffset,
&ifdentry);
if (ret < 0)
{
goto errout;
}
/* Fix-up the count and offset values in the StripOffsets IFD entry in the
* outfile. The StripOffsets data will be stored immediately after the
* outfile, hence, the correct offset is outsize.
*/
ret = tiff_readifdentry(info->outfd, info->filefmt->soifdoffset,
&ifdentry);
if (ret < 0)
{
goto errout;
}
tiff_put32(ifdentry.count, info->nstrips);
tiff_put32(ifdentry.offset, info->outsize);
ret = tiff_writeifdentry(info->outfd, info->filefmt->soifdoffset,
&ifdentry);
if (ret < 0)
{
goto errout;
}
/* Rewind to the beginning of tmpfile1 */
offset = lseek(info->tmp1fd, 0, SEEK_SET);
if (offset == (off_t)-1)
{
ret = -errno;
goto errout;
}
/* Seek to the end of the outfile */
ret = lseek(info->outfd, 0, SEEK_END);
if (offset == (off_t)-1)
{
ret = -errno;
goto errout;
}
/* Now read strip offset data from tmpfile1, update the offsets, and write
* the updated offsets to the outfile. The strip data will begin at offset
* outsize + tmp1size;
*/
maxoffsets = info->iosize >> 2;
#ifdef CONFIG_DEBUG_GRAPHICS
total = 0;
#endif
for (i = 0; i < info->nstrips; )
{
size_t noffsets;
ssize_t nbytes;
/* Read a group of up to 32-bit values */
noffsets = info->nstrips - i;
if (noffsets > maxoffsets)
{
noffsets = maxoffsets;
}
nbytes = tiff_read(info->tmp1fd, info->iobuffer, noffsets << 2);
/* If an error occurs or we fail to read exactly this number of
* bytes, then something bad happened.
*/
if (nbytes != noffsets << 2)
{
goto errout;
}
/* Fix up the offsets */
for (j = 0, ptr = info->iobuffer;
j < noffsets;
j++, ptr += 4)
{
uint32_t stripoff = tiff_get32(ptr);
stripoff += (info->outsize + info->tmp1size);
tiff_put32(ptr, stripoff);
}
/* Then write the corrected offsets to the outfile */
ret = tiff_write(info->outfd, info->iobuffer, nbytes);
if (ret < 0)
{
goto errout;
}
/* Update the count of offsets written */
i += noffsets;
#ifdef CONFIG_DEBUG_GRAPHICS
total += nbytes;
#endif
}
#ifdef CONFIG_DEBUG_GRAPHICS
DEBUGASSERT(total == info->tmp1size);
#endif
/* Rewind to the beginning of tmpfile2 */
offset = lseek(info->tmp2fd, 0, SEEK_SET);
if (offset == (off_t)-1)
{
ret = -errno;
goto errout;
}
/* Finally, copy the tmpfile2 to the end of the outfile */
#ifdef CONFIG_DEBUG_GRAPHICS
total = 0;
#endif
for (; ; )
{
ssize_t nbytes;
/* Read a block of data from tmpfile2 */
nbytes = tiff_read(info->tmp2fd, info->iobuffer, info->iosize);
/* Check for tead errors and for end-of-file */
if (nbytes < 0)
{
ret = (int)nbytes;
goto errout;
}
else if (nbytes == 0)
{
break;
}
/* Then copy the data to the outfile */
ret = tiff_write(info->outfd, info->iobuffer, nbytes);
if (ret < 0)
{
goto errout;
}
#ifdef CONFIG_DEBUG_GRAPHICS
total += nbytes;
#endif
}
#ifdef CONFIG_DEBUG_GRAPHICS
DEBUGASSERT(total == info->tmp2size);
#endif
/* Close all files and return success */
tiff_cleanup(info);
return OK;
errout:
tiff_abort(info);
return ret;
}
/****************************************************************************
* Name: tiff_abort
*
* Description:
* Abort the TIFF file creation and create-up resources.
*
* Input Parameters:
* info - A pointer to the caller allocated parameter passing/TIFF state
* instance.
*
* Returned Value:
* None
*
****************************************************************************/
void tiff_abort(FAR struct tiff_info_s *info)
{
/* Perform normal cleanup */
tiff_cleanup(info);
/* But then delete the output file as well */
unlink(info->outfile);
}