9233cd668e
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3961 42af7a65-404d-4744-a932-0658087f49c3
398 lines
16 KiB
Plaintext
Executable File
398 lines
16 KiB
Plaintext
Executable File
README File for the I2C Tool
|
|
============================
|
|
|
|
The I2C tool provides a way to debug I2C related problems. This README file
|
|
will provide usage information for the I2C tools.
|
|
|
|
CONTENTS
|
|
========
|
|
|
|
o System Requirements
|
|
- I2C Driver
|
|
- Configuration Options
|
|
o Help
|
|
o Common Line Form
|
|
o Common Command Options
|
|
- "Sticky" Options
|
|
- Environment variables
|
|
- Common Option Summary
|
|
o Command summary
|
|
- bus
|
|
- dev
|
|
- get
|
|
- set
|
|
- verf
|
|
o I2C Build Configuration
|
|
- NuttX Configuration Requirements
|
|
- I2C Tool Configuration Options
|
|
|
|
System Requirements
|
|
===================
|
|
|
|
I2C Driver
|
|
----------
|
|
In order to use the I2C driver, you system -- in particular, your I2C driver --
|
|
must meet certain requirements:
|
|
|
|
1. It support calling up_i2cinitialize() numerous times, resetting the I2C
|
|
hardware on each (initial) time. up_i2cuninitialize() will be called after
|
|
each call to up_i2cinitialize() to free any resources and disable the I2C.
|
|
2. up_i2cinitialize must accept any interface number without crashing. It
|
|
must simply return NULL if the device is not supported.
|
|
3. The I2C driver must support the transfer method (CONFIG_I2C_TRANSFER=y).
|
|
|
|
The I2C tool is designed to be implemented as a NuttShell (NSH) add-on. Read
|
|
the apps/nshlib/README.txt file for information about add-ons.
|
|
|
|
Configuration Options
|
|
---------------------
|
|
CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command
|
|
CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0).
|
|
CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3)
|
|
CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03)
|
|
CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77)
|
|
CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff)
|
|
CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 4000000)
|
|
|
|
HELP
|
|
====
|
|
|
|
First of all, the I2C tools supports a pretty extensive help output. That
|
|
help output can be view by entering either:
|
|
|
|
nsh> i2c help
|
|
|
|
or
|
|
|
|
nsh> i2c ?
|
|
|
|
Here is an example of the help output. I shows the general form of the
|
|
command line, the various I2C commands supported with their unique command
|
|
line options, and a more detailed summary of the command I2C command
|
|
options.
|
|
|
|
nsh> i2c help
|
|
Usage: i2c <cmd> [arguments]
|
|
Where <cmd> is one of:
|
|
|
|
Show help : ?
|
|
List buses : bus
|
|
List devices : dev [OPTIONS] <first> <last>
|
|
Read register : get [OPTIONS] [<repititions>]
|
|
Show help : help
|
|
Write register: set [OPTIONS] <value> [<repititions>]
|
|
Verify access : verf [OPTIONS] <value> [<repititions>]
|
|
|
|
Where common "sticky" OPTIONS include:
|
|
[-a addr] is the I2C device address (hex). Default: 03 Current: 03
|
|
[-b bus] is the I2C bus number (decimal). Default: 1 Current: 1
|
|
[-r regaddr] is the I2C device register address (hex). Default: 00 Current: 00
|
|
[-w width] is the data width (8 or 16 decimal). Default: 8 Current: 8
|
|
[-s|n], send/don't send start between command and data. Default: -n Current: -n
|
|
[-i|j], Auto increment|don't increment regaddr on repititions. Default: NO Current: NO
|
|
[-f freq] I2C frequency. Default: 100000 Current: 100000
|
|
|
|
NOTES:
|
|
o An environment variable like $PATH may be used for any argument.
|
|
o Arguments are "sticky". For example, once the I2C address is
|
|
specified, that address will be re-used until it is changed.
|
|
|
|
WARNING:
|
|
o The I2C dev command may have bad side effects on your I2C devices.
|
|
Use only at your own risk.
|
|
|
|
COMMAND LINE FORM
|
|
=================
|
|
|
|
The I2C is started from NSH by invoking the 'i2c' command from the NSH
|
|
command line. The general form of the 'i2c' command is:
|
|
|
|
i2c <cmd> [arguments]
|
|
|
|
Where <cmd> is a "sub-command" and identifies one I2C operations supported
|
|
by the tool. [arguments] represents the list of arguments needed to perform
|
|
the I2C operation. Those arguments vary from command to command as
|
|
described below. However, there is also a core set of common OPTIONS
|
|
supported by all commands. So perhaps a better representation of the
|
|
general I2C command would be:
|
|
|
|
i2c <cmd> [OPTIONS] [arguments]
|
|
|
|
Where [OPTIONS] represents the common options and and arguments represent
|
|
the operation-specific arguments.
|
|
|
|
COMMON COMMAND OPTIONS
|
|
======================
|
|
|
|
"Sticky" Options
|
|
----------------
|
|
In order to interact with I2C devices, there are a number of I2C parameters
|
|
that must be set correctly. One way to do this would be to provide to set
|
|
the value of each separate command for each I2C parameter. The I2C tool
|
|
takes a different approach, instead: The I2C configuration can be specified
|
|
as a (potentially long) sequence of command line arguments.
|
|
|
|
These arguments, however, are "sticky." They are sticky in the sense that
|
|
once you set the I2C parameter, that value will remain until it is reset
|
|
with a new value (or until you reset the board).
|
|
|
|
Environment Variables
|
|
---------------------
|
|
NOTE also that if environment variables are not disabled (by
|
|
CONFIG_DISABLE_ENVIRON=y), then these options may also be environment
|
|
variables. Environment variables must be preceded with the special
|
|
character $. For example, PWD is the variable that holds the current
|
|
working directory and so $PWD could be used as a command line argument. The
|
|
use of environment variables on the I2C tools command is really only useful
|
|
if you wish to write NSH scripts to execute a longer, more complex series of
|
|
I2C commands.
|
|
|
|
Common Option Summary
|
|
---------------------
|
|
|
|
[-a addr] is the I2C device address (hex). Default: 03 Current: 03
|
|
|
|
The [-a addr] sets the I2C device address. The valid range is 0x03
|
|
through 0x77 (this valid range is controlled by the configuration settings
|
|
CONFIG_I2CTOOL_MINADDR and CONFIG_I2CTOOL_MAXADDR). If you are working
|
|
with the same device, the address needs to be set only once.
|
|
|
|
All I2C address are 7-bit, hexadecimal values.
|
|
|
|
NOTE 1: Notice in the "help" output above it shows both default value of
|
|
the I2C address (03 hex) and the current address value (also 03 hex).
|
|
|
|
NOTE 2: Sometimes I2C addresses are represented as 8-bit values (with
|
|
bit zero indicating a read or write operation). The I2C tool uses a
|
|
7-bit representation of the address with bit 7 unused and no read/write
|
|
indication in bit 0. Essentially, the 7-bit address is like the 8-bit
|
|
address shifted right by 1.
|
|
|
|
NOTE 3: Most I2C bus controllers will also support 10-bit addressing.
|
|
That capability has not been integrated into the I2C tool as of this
|
|
writing.
|
|
|
|
[-b bus] is the I2C bus number (decimal). Default: 1 Current: 1
|
|
|
|
Most devices support multiple I2C devices and also have unique bus
|
|
numbering. This option identifies which bus you are working with now.
|
|
The valid range of bus numbers is controlled by the configuration settings
|
|
CONFIG_I2CTOOL_MINBUS and CONFIG_I2CTOOL_MAXBUS.
|
|
|
|
The bus numbers are small, decimal numbers.
|
|
|
|
[-r regaddr] is the I2C device register address (hex). Default: 00 Current: 00
|
|
|
|
The I2C set and get commands will access registers on the I2C device. This
|
|
option selects the device register address (sometimes called the sub-address).
|
|
This is an 8-bit hexadecimal value. The maximum value is determined by
|
|
the configuration setting CONFIG_I2CTOOL_MAXREGADDR.
|
|
|
|
[-w width] is the data width (8 or 16 decimal). Default: 8 Current: 8
|
|
|
|
Device register data may be 8-bit or 16-bit. This options selects one of
|
|
those two data widths.
|
|
|
|
[-s|n], send/don't send start between command and data. Default: -n Current: -n
|
|
|
|
This determines whether or not there should be a new I2C START between
|
|
sending of the register address and sending/receiving of the register data.
|
|
|
|
[-i|j], Auto increment|don't increment regaddr on repititions. Default: NO Current: NO
|
|
|
|
On commands that take a optional number of repetitions, the option can be
|
|
used to temporarily increment the regaddr value by one on each repitition.
|
|
|
|
[-f freq] I2C frequency. Default: 400000 Current: 400000
|
|
|
|
The [-f freq] sets the frequency of the I2C device.
|
|
|
|
COMMAND SUMMARY
|
|
===============
|
|
|
|
We have already seen the I2C help (or ?) commands above. This section will
|
|
discusse the remaining commands.
|
|
|
|
List buses: bus [OPTIONS]
|
|
--------------------------
|
|
|
|
This command will simply list all of the configured I2C buses and indicate
|
|
which are supported by the driver and which are not:
|
|
|
|
BUS EXISTS?
|
|
Bus 1: YES
|
|
Bus 2: NO
|
|
|
|
The valid range of bus numbers is controlled by the configuration settings
|
|
CONFIG_I2CTOOL_MINBUS and CONFIG_I2CTOOL_MAXBUS.
|
|
|
|
List devices: dev [OPTIONS] <first> <last>
|
|
------------------------------------------
|
|
|
|
The 'dev' command will attempt to identify all of the I2C devices on the
|
|
selected bus. The <first> and <last> arguments are 7-bit, hexadecimal
|
|
I2C addresses. This command will examine a range of addresses beginning
|
|
with <first> and continuing through <last>. It will request the value
|
|
of register zero from each device.
|
|
|
|
If the device at an address responds, then this command will display the
|
|
address of the device. If the device does not respond, this command will
|
|
display "--". The resulting display is like:
|
|
|
|
nsh> i2c dev 03 77
|
|
0 1 2 3 4 5 6 7 8 9 a b c d e f
|
|
00: -- -- -- -- -- -- -- -- -- -- -- -- --
|
|
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
|
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
|
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
|
40: -- -- -- -- -- -- -- -- -- 49 -- -- -- -- -- --
|
|
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
|
70: -- -- -- -- -- -- -- --
|
|
|
|
WARNINGS:
|
|
o The I2C dev command may have bad side effects on certain I2C devices.
|
|
For example, if could cause data loss in an EEPROM device.
|
|
o The I2C dev command also depends upon the underlying behavior of the
|
|
I2C driver. How does the driver respond to addressing failures?
|
|
|
|
Read register: get [OPTIONS]
|
|
----------------------------
|
|
|
|
This command will read the value of the I2C register using the selected
|
|
I2C parameters in the common options. No other arguments are required.
|
|
|
|
This command with write the 8-bit address value then read an 8- or 16-bit
|
|
data value from the device. Optionally, it may re-start the transfer
|
|
before obtaining the data.
|
|
|
|
An optional <repititions> argument can be supplied to repeat the
|
|
read operation an arbitrary number of times (up to 2 billion). If
|
|
auto-increment is select (-i), then the register address will be
|
|
temporarily incremented on each repitions. The increment is temporary
|
|
in the since that it will not alter the "sticky" value of the
|
|
register address.
|
|
|
|
On success, the output will look like the following (the data value
|
|
read will be shown as a 4-character hexadecimal number if the 16-bit
|
|
data width option is selected).
|
|
|
|
READ Bus: 1 Addr: 49 Subaddr: 04 Value: 96
|
|
|
|
All values (except the bus numbers) are hexadecimal.
|
|
|
|
Write register: set [OPTIONS] <value>
|
|
-------------------------------------
|
|
|
|
This command will write a value to an I2C register using the selected
|
|
I2C parameters in the common options. The value to write must be provided
|
|
as the final, hexadecimal value. This value may be an 8-bit value (in the
|
|
range 00-ff) or a 16-bit value (in the range 0000-ffff), depending upon
|
|
the selected data width.
|
|
|
|
This command will write the 8-bit address value then write the 8- or 16-bit
|
|
data value to the device. Optionally, it may re-start the transfer
|
|
before writing the data.
|
|
|
|
An optional <repititions> argument can be supplied to repeat the
|
|
write operation an arbitrary number of times (up to 2 billion). If
|
|
auto-increment is select (-i), then the register address will be
|
|
temporarily incremented on each repitions. The increment is temporary
|
|
in the since that it will not alter the "sticky" value of the
|
|
register address.
|
|
|
|
On success, the output will look like the following (the data value
|
|
written will be shown as a 4-character hexadecimal number if the 16-bit
|
|
data width option is selected).
|
|
|
|
WROTE Bus: 1 Addr: 49 Subaddr: 04 Value: 96
|
|
|
|
All values (except the bus numbers) are hexadecimal.
|
|
|
|
Verify access : verf [OPTIONS] <value> [<repititions>]
|
|
------------------------------------------------------
|
|
|
|
This command combines writing and reading from an I2C device register.
|
|
It will write a value to an will write a value to an I2C register using
|
|
the selected I2C parameters in the common options just as described for
|
|
tie 'set' command. Then this command will read the value back just
|
|
as described with the 'get' command. Finally, this command will compare
|
|
the value read and against the value written and emit an error message
|
|
if they do not match.
|
|
|
|
If no value is provided, then this command will use the register address
|
|
itself as the data, providing for a address-in-address test.
|
|
|
|
An optional <repititions> argument can be supplied to repeat the
|
|
verify operation an arbitrary number of times (up to 2 billion). If
|
|
auto-increment is select (-i), then the register address will be
|
|
temporarily incremented on each repitions. The increment is temporary
|
|
in the since that it will not alter the "sticky" value of the
|
|
register address.
|
|
|
|
On success, the output will look like the following (the data value
|
|
written will be shown as a 4-character hexadecimal number if the 16-bit
|
|
data width option is selected).
|
|
|
|
VERIFY Bus: 1 Addr: 49 Subaddr: 04 Wrote: 96 Read: 92 FAILURE
|
|
|
|
All values (except the bus numbers) are hexadecimal.
|
|
|
|
I2C BUILD CONFIGURATION
|
|
=======================
|
|
|
|
NuttX Configuration Requirements
|
|
--------------------------------
|
|
The I2C tools requires the following in your NuttX configuration:
|
|
|
|
1. Device-specific I2C support must be enabled. The I2C tool will call the
|
|
platform-specific function up_i2cinitialize() to get instances of the
|
|
I2C interface and the platform-specific function up_i2cuninitialize()
|
|
to discard instances of the I2C interface.
|
|
|
|
NOTE 1: The I2C interface is defined in include/nuttx/i2c.h.
|
|
|
|
NOTE 2: This I2C tool uses direct I2C device interfaces. As such, it
|
|
relies on internal OS interfaces that are not normally available to a
|
|
user-space program. As a result, the I2C tool cannot be used if a
|
|
NuttX is built as a protected, supervisor kernel (CONFIG_NUTTX_KERNEL).
|
|
|
|
2. I2C driver configuration
|
|
|
|
The CONFIG_I2C_TRANSFER option must also be set in your NuttX
|
|
configuration. This configuration is the defconfig file in your
|
|
configuration directory that is copied to the NuttX top-level
|
|
directory as .config when NuttX is configured.
|
|
|
|
CONFIG_I2C_TRANSFER=y
|
|
|
|
NOTE: CONFIG_I2C_TRANSFER adds extra methods to the I2C interface.
|
|
Not all I2C interfaces support these extra methods. If your platform's
|
|
I2C driver does not support these extra methods, then you cannot use
|
|
the I2C tool unless you extend the support in your platform I2C
|
|
driver.
|
|
|
|
3. Application configuration.
|
|
|
|
The path to the I2C tool directory must also be set in your NuttX
|
|
application configuration. This application configuration is the
|
|
appconfig file in your configuration directory that is copied to the
|
|
NuttX application directory as .config when NuttX is configured.
|
|
|
|
CONFIGURE_APPS += system/i2c
|
|
|
|
I2C Tool Configuration Options
|
|
------------------------------
|
|
|
|
The default behavior of the I2C tool can be modified by the setting the
|
|
options in the NuttX configuration. This configuration is the defconfig
|
|
file in your configuration directory that is copied to the NuttX top-level
|
|
directory as .config when NuttX is configured.
|
|
|
|
CONFIG_I2CTOOL_BUILTIN: Build the tools as an NSH built-in command
|
|
CONFIG_I2CTOOL_MINBUS: Smallest bus index supported by the hardware (default 0).
|
|
CONFIG_I2CTOOL_MAXBUS: Largest bus index supported by the hardware (default 3)
|
|
CONFIG_I2CTOOL_MINADDR: Minium device address (default: 0x03)
|
|
CONFIG_I2CTOOL_MAXADDR: Largest device address (default: 0x77)
|
|
CONFIG_I2CTOOL_MAXREGADDR: Largest register address (default: 0xff)
|
|
CONFIG_I2CTOOL_DEFFREQ: Default frequency (default: 4000000)
|