e7156be066
This commit changes only ones with the default 2048 and leaves the others. E.g. this leaves SYSTEM_RAMTEST_STACKSIZE, whose default is 1024. I guess those need to be inspected one-by-one.
General Usage Instructions:
1. The receiver side enter, start the receiver program. The receiver
is now waiting to receive data on the configured serial port
2. On the sender side start the sender program. This will send data to
the receiver which will verify that no data is lost.
On Linux, you can alternatively do:
$ stty -F /dev/ttyACM0 crtscts
$ cat testdata.dat >/dev/ttyACM0
where you need to replace /dev/ttyACM0 with your selected serial
device.