sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
693d73cc0d
nuttx-apps/netutils/ntpclient/ntpclient.c

483 lines
14 KiB
C
Raw Blame History

/****************************************************************************
* netutils/ntpclient/ntpclient.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/socket.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <sched.h>
#include <errno.h>
#include <debug.h>
#include <apps/netutils/ntpclient.h>
#include "ntpv3.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* NTP Time is seconds since 1900. Convert to Unix time which is seconds
* since 1970
*/
#define NTP2UNIX_TRANLSLATION 2208988800u
#define NTP_VERSION 3
/****************************************************************************
* Private Types
****************************************************************************/
/* This enumeration describes the state of the NTP daemon */
enum ntpclient_daemon_e
{
NTP_NOT_RUNNING = 0,
NTP_STARTED,
NTP_RUNNING,
NTP_STOP_REQUESTED,
NTP_STOPPED
};
/* This type describes the state of the NTP client daemon. Only once
* instance of the NTP daemon is permitted in this implementation.
*/
struct ntpclient_daemon_s
{
volatile uint8_t state; /* See enum ntpclient_daemon_e */
sem_t interlock; /* Used to synchronize start and stop events */
pid_t pid; /* Task ID of the NTP daemon */
};
/****************************************************************************
* Private Data
****************************************************************************/
/* This type describes the state of the NTP client daemon. Only once
* instance of the NTP daemon is permitted in this implementation. This
* limitation is due only to this global data structure.
*/
static struct ntpclient_daemon_s g_ntpclient_daemon;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: ntpclient_getuint32
*
* Description:
* Return the big-endian, 4-byte value in network (big-endian) order.
*
****************************************************************************/
static inline uint32_t ntpclient_getuint32(FAR uint8_t *ptr)
{
/* Network order is big-endian; host order is irrelevant */
return (uint32_t)ptr[0] | /* LS byte appears first in data stream */
((uint32_t)ptr[1] << 8) |
((uint32_t)ptr[2] << 16) |
((uint32_t)ptr[3] << 24);
}
/****************************************************************************
* Name: ntpclient_settime
*
* Description:
* Given the NTP time in seconds, set the system time
*
****************************************************************************/
static void ntpclient_settime(FAR uint8_t *timestamp)
{
struct timespec tp;
time_t seconds;
uint32_t frac;
uint32_t nsec;
#ifdef CONFIG_HAVE_LONG_LONG
uint64_t tmp;
#else
uint32_t a16;
uint32_t b0;
uint32_t t32;
uint32_t t16;
uint32_t t0;
#endif
/* NTP timestamps are represented as a 64-bit fixed-point number, in
* seconds relative to 0000 UT on 1 January 1900. The integer part is
* in the first 32 bits and the fraction part in the last 32 bits, as
* shown in the following diagram.
*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Integer Part |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Fraction Part |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
seconds = ntpclient_getuint32(timestamp);
/* Translate seconds to account for the difference in the origin time */
if (seconds > NTP2UNIX_TRANLSLATION)
{
seconds -= NTP2UNIX_TRANLSLATION;
}
/* Conversion of the fractional part to nanoseconds:
*
* NSec = (f * 1,000,000,000) / 4,294,967,296
* = (f * (5**9 * 2**9) / (2**32)
* = (f * 5**9) / (2**23)
* = (f * 1,953,125) / 8,388,608
*/
frac = ntpclient_getuint32(timestamp + 4);
#ifdef CONFIG_HAVE_LONG_LONG
/* if we have 64-bit long long values, then the computation is easy */
tmp = ((uint64_t)frac * 1953125) >> 23;
nsec = (uint32_t)tmp;
#else
/* If we don't have 64 bit integer types, then the calculation is a little
* more complex:
*
* Let f = a << 16 + b
* 1,953,125 = 0x1d << 16 + 0xcd65
* NSec << 23 = ((a << 16) + b) * ((0x1d << 16) + 0xcd65)
* = (a << 16) * 0x1d << 16) +
* (a << 16) * 0xcd65 +
* b * 0x1d << 16) +
* b * 0xcd65;
*/
/* Break the fractional part up into two values */
a16 = frac >> 16;
b0 = frac & 0xffff;
/* Get the b32 and b0 terms
*
* t32 = (a << 16) * 0x1d << 16)
* t0 = b * 0xcd65
*/
t32 = 0x001d * a16;
t0 = 0xcd65 * b0
/* Get the first b16 term
*
* (a << 16) * 0xcd65
*/
t16 = 0xcd65 * a16
/* Add the upper 16-bits to the b32 accumulator */
t32 += (t16 >> 16);
/* Add the lower 16-bits to the b0 accumulator, handling carry to the b32
* accumulator
*/
t16 <<= 16;
if (t0 > (0xffffffff - t16))
{
t32++;
}
else
{
t0 += t16;
}
/* Get the second b16 term
*
* b * 0x1d << 16)
*/
t16 = 0x001d * b
/* Add the upper 16-bits to the b32 accumulator */
t32 += (t16 >> 16);
/* Add the lower 16-bits to the b0 accumulator, handling carry to the b32
* accumulator
*/
t16 <<= 16;
if (t0 > (0xffffffff - t16))
{
t32++;
}
else
{
t0 += t16;
}
/* t32 and t0 represent the 64 bit product. Now shift right by 23 bits to
* accomplish the divide by by 2**23.
*/
nsec = (t32 << (32 - 23)) + (t0 >> 23)
#endif
/* Set the system time */
tp.tv_sec = seconds;
tp.tv_nsec = nsec;
clock_settime(CLOCK_REALTIME, &tp);
svdbg("Set time to %ld seconds: %d\n", tp.tv_sec, ret);
}
/****************************************************************************
* Name: ntpclient_daemon
*
* Description:
* This the the NTP client daemon. This is a *very* minimal
* implementation! An NTP request is and the system clock is set when the
* response is received
*
****************************************************************************/
static int ntpclient_daemon(int argc, char **argv)
{
struct sockaddr_in server;
struct ntp_datagram_s xmit;
struct ntp_datagram_s recv;
struct timeval tv;
socklen_t socklen;
ssize_t nbytes;
int exitcode = EXIT_SUCCESS;
int ret;
int sd;
/* Indicate that we have started */
g_ntpclient_daemon.state = NTP_RUNNING;
sem_post(&g_ntpclient_daemon.interlock);
/* Create a datagram socket */
sd = socket(AF_INET, SOCK_DGRAM, 0);
if (sd < 0)
{
ndbg("ERROR: socket failed: %d\n", errno);
g_ntpclient_daemon.state = NTP_STOPPED;
sem_post(&g_ntpclient_daemon.interlock);
return EXIT_FAILURE;
}
/* Setup a receive timeout on the socket */
tv.tv_sec = 5;
tv.tv_usec = 0;
ret = setsockopt(sd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(struct timeval));
if (ret < 0)
{
ndbg("ERROR: setsockopt failed: %d\n", errno);
g_ntpclient_daemon.state = NTP_STOPPED;
sem_post(&g_ntpclient_daemon.interlock);
return EXIT_FAILURE;
}
/* Setup or sockaddr_in struct with information about the server we are
* going to ask the the time from.
*/
memset(&server, 0, sizeof(struct sockaddr_in));
server.sin_family = AF_INET;
server.sin_port = htons(CONFIG_NETUTILS_NTPCLIENT_PORTNO);
server.sin_addr.s_addr = htonl(CONFIG_NETUTILS_NTPCLIENT_SERVERIP);
/* Here we do the communication with the NTP server. This is a very simple
* client architecture. A request is sent and then a NTP packet is received.
* The NTP packet received is decoded to the recv structure for easy
* access.
*/
while (g_ntpclient_daemon.state == NTP_STOP_REQUESTED)
{
memset(&xmit, 0, sizeof(xmit));
xmit.lvm = MKLVM(0, 3, NTP_VERSION);
svdbg("Sending a NTP packet\n");
ret = sendto(sd, &xmit, sizeof(struct ntp_datagram_s),
0, (FAR struct sockaddr *)&server,
sizeof(struct sockaddr_in));
if (ret < 0)
{
ndbg("ERROR: sendto() failed: %d\n", errno);
exitcode = EXIT_FAILURE;
break;
}
/* Attempt to receive a packet (with a timeout) */
socklen = sizeof(struct sockaddr_in);
nbytes = recvfrom(sd, (void *)&recv, sizeof(struct ntp_datagram_s),
0, (FAR struct sockaddr *)&server, &socklen);
if (nbytes >= NTP_DATAGRAM_MINSIZE)
{
svdbg("Setting time\n");
ntpclient_settime(recv.recvtimestamp);
}
/* A full implementation of an NTP client would requireq much more. I
* think we we can skip that here.
*/
svdbg("Waiting for %d seconds\n", CONFIG_NETUTILS_NTPCLIENT_POLLDELAYSEC);
(void)sleep(CONFIG_NETUTILS_NTPCLIENT_POLLDELAYSEC);
}
/* The NTP client is terminating */
g_ntpclient_daemon.state = NTP_STOPPED;
sem_post(&g_ntpclient_daemon.interlock);
return exitcode;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: ntpclient_start
*
* Description:
* Start the NTP daemon
*
****************************************************************************/
int ntpclient_start(void)
{
/* Is the NTP in a non-running state? */
sched_lock();
if (g_ntpclient_daemon.state == NTP_NOT_RUNNING ||
g_ntpclient_daemon.state == NTP_STOPPED)
{
/* Is this the first time that the NTP daemon has been started? */
if (g_ntpclient_daemon.state == NTP_NOT_RUNNING)
{
/* Yes... then we will need to initialize the state structure */
sem_init(&g_ntpclient_daemon.interlock, 0, 0);
}
/* Start the NTP daemon */
g_ntpclient_daemon.state = NTP_STARTED;
g_ntpclient_daemon.pid =
TASK_CREATE("NTP daemon", CONFIG_NETUTILS_NTPCLIENT_SERVERPRIO,
CONFIG_NETUTILS_NTPCLIENT_STACKSIZE, ntpclient_daemon,
NULL);
/* Handle failures to start the NTP daemon */
if (g_ntpclient_daemon.pid < 0)
{
int errval = errno;
DEBUGASSERT(errval > 0);
g_ntpclient_daemon.state = NTP_STOPPED;
ndbg("ERROR: Failed to start the NTP daemon\n", errval);
return -errval;
}
/* Wait for any daemon state change */
do
{
(void)sem_wait(&g_ntpclient_daemon.interlock);
}
while (g_ntpclient_daemon.state == NTP_STARTED);
}
sched_unlock();
return OK;
}
/****************************************************************************
* Name: ntpclient_stop
*
* Description:
* Stop the NTP daemon
*
****************************************************************************/
int ntpclient_stop(void)
{
/* Is the NTP in a running state? */
sched_lock();
if (g_ntpclient_daemon.state == NTP_STARTED ||
g_ntpclient_daemon.state == NTP_RUNNING)
{
/* Yes.. request that the daemon stop. */
g_ntpclient_daemon.state = NTP_STOP_REQUESTED;
/* Wait for any daemon state change */
do
{
(void)sem_wait(&g_ntpclient_daemon.interlock);
}
while (g_ntpclient_daemon.state == NTP_STOP_REQUESTED);
}
sched_unlock();
return OK;
}
Reference in New Issue View Git Blame Copy Permalink