apps/testing README file
========================
The apps/testing directory is used to build NuttX-specific tests and to
include external testing frameworks.
There is overlap between what you will find in apps/examples and apps/testing
in the sense that there are also tests in apps/examples as well. Those
tests, however, can also be used to illustrate usage of a NuttX feature.
Most of the tests in apps/testing, on the other hand, are pure tests with
little value as usage examples.
testing/cxxtest
===============
This is a test of the C++ standard library. At present a port of the uClibc++
C++ library is available. Due to licensing issues, the uClibc++ C++ library
is not included in the NuttX source tree by default, but must be installed
(see the README.txt file in the uClibc++ download package for installation).
The uClibc++ test includes simple test of:
- iostreams,
- STL,
- RTTI, and
- Exceptions
Example Configuration Options
-----------------------------
CONFIG_TESTING_CXXTEST=y - Eanbles the example
Other Required Configuration Settings
-------------------------------------
Other NuttX setting that are required include:
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_UCLIBCXX=y or CONFIG_LIBCXX=y
Additional uClibc++/libcxx settings may be required in your build environment.
testing/fstest
==============
This is a generic file system test that derives from testing/nxffs. It
was created to test the tmpfs file system, but should work with any file
system provided that all initialization has already been performed prior
to starting the test.
This test a a general test for any file system, but includes some specific
hooks for the SPIFFS file system.
* CONFIG_TESTING_FSTEST: Enable the file system example
* CONFIG_TESTING_FSTEST_MAXNAME: Determines the maximum size of names used
in the filesystem
* CONFIG_TESTING_FSTEST_MAXFILE: Determines the maximum size of a file
* CONFIG_TESTING_FSTEST_MAXIO: Max I/O, default 347.
* CONFIG_TESTING_FSTEST_MAXOPEN: Max open files.
* CONFIG_TESTING_FSTEST_MOUNTPT: Path where the file system is mounted.
* CONFIG_TESTING_FSTEST_NLOOPS: Number of test loops. default 100
* CONFIG_TESTING_FSTEST_VERBOSE: Verbose output
testing/mm
==========
This is a simple test of the memory manager.
testing/nxffs
=============
This is a test of the NuttX NXFFS FLASH file system. This is an NXFFS
stress test and beats on the file system very hard. It should only
be used in a simulation environment! Putting this NXFFS test on real
hardware will most likely destroy your FLASH. You have been warned.
testing/ostest
==============
This is the NuttX 'qualification' suite. It attempts to exercise
a broad set of OS functionality. Its coverage is not very extensive
as of this writing, but it is used to qualify each NuttX release.
The behavior of the ostest can be modified with the following
settings in the boards/<arch>/<chip>/<board>/configs/<config>/defconfig
file:
* CONFIG_NSH_BUILTIN_APPS
Build the OS test example as an NSH built-in application.
* CONFIG_TESTING_OSTEST_LOOPS
Used to control the number of executions of the test. If
undefined, the test executes one time. If defined to be
zero, the test runs forever.
* CONFIG_TESTING_OSTEST_STACKSIZE
Used to create the ostest task. Default is 8192.
* CONFIG_TESTING_OSTEST_NBARRIER_THREADS
Specifies the number of threads to create in the barrier
test. The default is 8 but a smaller number may be needed on
systems without sufficient memory to start so many threads.
* CONFIG_TESTING_OSTEST_RR_RANGE
During round-robin scheduling test two threads are created. Each of the threads
searches for prime numbers in the configurable range, doing that configurable
number of times.
This value specifies the end of search range and together with number of runs
allows to configure the length of this test - it should last at least a few
tens of seconds. Allowed values [1; 32767], default 10000
* CONFIG_TESTING_OSTEST_RR_RUNS
During round-robin scheduling test two threads are created. Each of the threads
searches for prime numbers in the configurable range, doing that configurable
number of times.
testing/smart
=============
This is a test of the SMART file system that derives from
testing/nxffs.
* CONFIG_TESTING_SMART: - Enable the SMART file system example
* CONFIG_TESTING_SMART_ARCHINIT: The default is to use the RAM MTD
device at drivers/mtd/rammtd.c. But an architecture-specific MTD
driver can be used instead by defining CONFIG_TESTING_SMART_ARCHINIT. In
this case, the initialization logic will call smart_archinitialize()
to obtain the MTD driver instance.
* CONFIG_TESTING_SMART_NEBLOCKS: When CONFIG_TESTING_SMART_ARCHINIT is not
defined, this test will use the RAM MTD device at drivers/mtd/rammtd.c
to simulate FLASH. In this case, this value must be provided to give
the number of erase blocks in MTD RAM device. The size of the allocated
RAM drive will be: CONFIG_RAMMTD_ERASESIZE * CONFIG_TESTING_SMART_NEBLOCKS
* CONFIG_TESTING_SMART_MAXNAME: Determines the maximum size of names used
in the filesystem
* CONFIG_TESTING_SMART_MAXFILE: Determines the maximum size of a file
* CONFIG_TESTING_SMART_MAXIO: Max I/O, default 347.
* CONFIG_TESTING_SMART_MAXOPEN: Max open files.
* CONFIG_TESTING_SMART_MOUNTPT: SMART mountpoint
* CONFIG_TESTING_SMART_NLOOPS: Number of test loops. default 100
* CONFIG_TESTING_SMART_VERBOSE: Verbose output
testing/smart_test
==================
Performs a file-based test on a SMART (or any) filesystem. Validates
seek, append and seek-with-write operations.
* CONFIG_TESTING_SMART_TEST=y
Source: NuttX
Author: Ken Pettit
Date: April 24, 2013
Performs a file-based test on a SMART (or any) filesystem. Validates seek,
append and seek-with-write operations.
Usage:
flash_test mtdblock_device
Additional options:
--force to replace existing installation
testing/smp
===========
This is a simple test for SMP functionality. It is basically just the
pthread barrier test with some custom instrumentation.
testing/unity
=============
Unity is a unit testing framework for C developed by ThrowTheSwitch.org:
http://www.throwtheswitch.org/unity
d07db1fa5e