nuttx-apps/industry/foc/fixed16/foc_ramp.c
raiden00pl d75d6b7af0 Add FOC library
Supported features:
- float and fixed16 operations
- helper interface to interact with the kernel-side FOC device
- general interface for FOC controller
- PI current/voltage controller
- 3-phase space vector modulation
- general interface for FOC model
- PMSM model
- general interface for phase angle data
- open-loop handler
- general interface for phase velocity data
- general interface for ramp (eg. velocity ramp, torque ramp)
- (WIP) CORDIC interface for hardware acceleration
2021-04-10 00:39:09 -05:00

179 lines
4.6 KiB
C

/****************************************************************************
* apps/industry/foc/fixed16/foc_ramp.c
* This file implements ramp for fixed16
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include "industry/foc/foc_common.h"
#include "industry/foc/fixed16/foc_ramp.h"
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: foc_ramp_init_b16
*
* Description:
* Initialize ramp (fixed16)
*
* Input Parameter:
* ramp - pointer to ramp handler
* per - ramp period
* thr - ramp threshold
* acc - ramp acceleration
* dec - ramp decceleration
*
****************************************************************************/
int foc_ramp_init_b16(FAR struct foc_ramp_b16_s *ramp, b16_t per,
b16_t thr, b16_t acc, b16_t dec)
{
DEBUGASSERT(ramp);
DEBUGASSERT(per > 0);
DEBUGASSERT(thr > 0);
DEBUGASSERT(acc > 0);
DEBUGASSERT(dec > 0);
ramp->per = per;
ramp->ramp_thr = thr;
ramp->ramp_acc = acc;
ramp->ramp_dec = dec;
ramp->ramp_acc_per = b16mulb16(ramp->ramp_acc, ramp->per);
ramp->ramp_dec_per = b16mulb16(ramp->ramp_dec, ramp->per);
return OK;
}
/****************************************************************************
* Name: foc_ramp_run_b16
*
* Description:
* Handle ramp (fixed16)
*
* Input Parameter:
* ramp - pointer to ramp handler
* des - ramp parameter destination
* now - ramp parameter now
* set - (out) ramp parameter set
*
****************************************************************************/
int foc_ramp_run_b16(FAR struct foc_ramp_b16_s *ramp, b16_t des,
b16_t now, FAR b16_t *set)
{
DEBUGASSERT(ramp);
/* Check if we require soft start/stop operation.
* Only if the user set point differs from the driver set point
*/
if (des != *set)
{
ramp->diff = des - *set;
if (ramp->diff >= ramp->ramp_thr)
{
ramp->ramp_mode = RAMP_MODE_SOFTSTART;
}
else if (ramp->diff <= -ramp->ramp_thr)
{
ramp->ramp_mode = RAMP_MODE_SOFTSTOP;
}
else
{
/* Just set new setpoint */
*set = des;
ramp->ramp_mode = RAMP_MODE_NORMAL;
}
}
else
{
ramp->ramp_mode = RAMP_MODE_NORMAL;
}
/* Handle according to current motor state */
switch (ramp->ramp_mode)
{
case RAMP_MODE_NORMAL:
{
/* Nothing to do here ? */
break;
}
case RAMP_MODE_SOFTSTART:
{
if (des - *set >= ramp->ramp_thr)
{
/* Increase setpoint with ramp */
*set = now + ramp->ramp_acc_per;
}
else
{
/* Set final setpoint and exit soft start */
*set = des;
ramp->ramp_mode = RAMP_MODE_NORMAL;
}
break;
}
case RAMP_MODE_SOFTSTOP:
{
if (des - *set <= -ramp->ramp_thr)
{
/* Stop motor with ramp */
*set = now - ramp->ramp_dec_per;
}
else
{
/* Set final setpoint and exit soft stop */
*set = des;
ramp->ramp_mode = RAMP_MODE_NORMAL;
}
break;
}
default:
{
/* We should not be here */
DEBUGASSERT(0);
break;
}
}
return OK;
}