sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
90484a33e9
nuttx-apps/examples/udpblaster/Kconfig
YAMAMOTO Takashi e7156be066 Change the defaults of stack size configs to DEFAULT_TASK_STACKSIZE 
This commit changes only ones with the default 2048 and
leaves the others.
E.g. this leaves SYSTEM_RAMTEST_STACKSIZE, whose default is 1024.
I guess those need to be inspected one-by-one.
2020-03-27 02:43:11 -05:00

350 lines
10 KiB
Plaintext
Raw Blame History

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
config EXAMPLES_UDPBLASTER
tristate "UDP blaster example"
default n
depends on NET_UDP
---help---
Enable the network test example
if EXAMPLES_UDPBLASTER
config EXAMPLES_UDPBLASTER_PROGNAME
string "Program name"
default "udpblaster"
---help---
This is the name of the program that will be used when the Nettest
program is installed.
config EXAMPLES_UDPBLASTER_STACKSIZE
int "Nettest stack size"
default DEFAULT_TASK_STACKSIZE
config EXAMPLES_UDPBLASTER_PRIORITY
int "Nettest priority"
default 100
config EXAMPLES_UDPBLASTER_POLLOUT
bool "Use poll() to pace output"
default n
---help---
Client will use poll() to verify that sendto() will not block. This
does not improve performance (in fact, it will degrade perform
slightly). But it is useful for verifying that poll() can be used
to pace output.
config EXAMPLES_UDPBLASTER_HOSTRATE
int "Host send rate (bits/second)"
default 800000
choice
prompt "IP Domain"
default EXAMPLES_UDPBLASTER_IPv4 if NET_IPv4
default EXAMPLES_UDPBLASTER_IPv6 if NET_IPv6 && !NET_IPv4
config EXAMPLES_UDPBLASTER_IPv4
bool "IPv4"
depends on NET_IPv4
config EXAMPLES_UDPBLASTER_IPv6
bool "IPv6"
depends on NET_IPv6
endchoice # IP Domain
config EXAMPLES_UDPBLASTER_INIT
bool "Initialize network"
default n if NSH_NETINIT
default y if !NSH_NETINIT
depends on !EXAMPLES_UDPBLASTER_LOOPBACK
---help---
Include logic to initialize the network. This should not be done if
the network is already initialized when udpblaster runs. This is
usually the case, for example, when udpblaster is run as an NSH built-
in task.
config EXAMPLES_UDPBLASTER_NOMAC
bool "Use Canned MAC Address"
default n
depends on EXAMPLES_UDPBLASTER_INIT
if EXAMPLES_UDPBLASTER_IPv4
comment "IPv4 addresses"
config EXAMPLES_UDPBLASTER_TARGETIP
hex "Target IP address"
default 0x0a000002
config EXAMPLES_UDPBLASTER_HOSTIP
hex "Host IP address)"
default 0x0a000001
if EXAMPLES_UDPBLASTER_INIT
config EXAMPLES_UDPBLASTER_NETMASK
hex "Network Mask"
default 0xffffff00
endif # EXAMPLES_UDPBLASTER_INIT
endif # EXAMPLES_UDPBLASTER_IPv4
if EXAMPLES_UDPBLASTER_IPv6
if !NET_ICMPv6_AUTOCONF
comment "Target IPv6 address"
config EXAMPLES_UDPBLASTER_TARGETIPv6_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the first of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_UDPBLASTER_TARGETIPv6_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the second of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_UDPBLASTER_TARGETIPv6_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the third of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_UDPBLASTER_TARGETIPv6_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the fourth of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_UDPBLASTER_TARGETIPv6_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the fifth of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_UDPBLASTER_TARGETIPv6_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the sixth of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_UDPBLASTER_TARGETIPv6_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the seventh of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_UDPBLASTER_TARGETIPv6_8
hex "[7]"
default 0x0002
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the last of the 8-values. The
default for all eight values is fc00::2.
comment "Host IPv6 address"
config EXAMPLES_UDPBLASTER_HOSTIPv6_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the first of the 8-values.
The default for all eight values is fc00::1.
config EXAMPLES_UDPBLASTER_HOSTIPv6_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the second of the 8-values.
The default for all eight values is fc00::1.
config EXAMPLES_UDPBLASTER_HOSTIPv6_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the third of the 8-values.
The default for all eight values is fc00::1.
config EXAMPLES_UDPBLASTER_HOSTIPv6_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the fourth of the 8-values.
The default for all eight values is fc00::1.
config EXAMPLES_UDPBLASTER_HOSTIPv6_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the fifth of the 8-values.
The default for all eight values is fc00::1.
config EXAMPLES_UDPBLASTER_HOSTIPv6_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the sixth of the 8-values.
The default for all eight values is fc00::1.
config EXAMPLES_UDPBLASTER_HOSTIPv6_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the seventh of the 8-values.
The default for all eight values is fc00::1.
config EXAMPLES_UDPBLASTER_HOSTIPv6_8
hex "[7]"
default 0x0001
range 0x0 0xffff
---help---
Host IP address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the last of the 8-values.
The default for all eight values is fc00::1.
if EXAMPLES_UDPBLASTER_INIT
comment "IPv6 Network mask"
config EXAMPLES_UDPBLASTER_IPv6NETMASK_1
hex "[0]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the first of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_UDPBLASTER_IPv6NETMASK_2
hex "[1]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the second of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_UDPBLASTER_IPv6NETMASK_3
hex "[2]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the third of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_UDPBLASTER_IPv6NETMASK_4
hex "[3]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the fourth of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_UDPBLASTER_IPv6NETMASK_5
hex "[4]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the fifth of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_UDPBLASTER_IPv6NETMASK_6
hex "[5]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the sixth of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_UDPBLASTER_IPv6NETMASK_7
hex "[6]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the seventh of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_UDPBLASTER_IPv6NETMASK_8
hex "[7]"
default 0xff80
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the eighth of the 8-values. The default for
all eight values is fe00::0.
endif # NET_ICMPv6_AUTOCONF
endif # EXAMPLES_UDPBLASTER_INIT
endif # EXAMPLES_UDPBLASTER_IPv6
endif # EXAMPLES_UDPBLASTER
Reference in New Issue View Git Blame Copy Permalink