sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9f7c9b273f
nuttx-apps/system/hex2bin/hex2mem_main.c

252 lines
8.2 KiB
C
Raw Blame History

/****************************************************************************
* apps/system/hex2mem_main.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <nuttx/streams.h>
#include <apps/hex2bin.h>
#ifdef CONFIG_SYSTEM_HEX2MEM_BUILTIN
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: show_usage
****************************************************************************/
static void show_usage(FAR const char *progname, int exitcode)
{
#ifdef CONFIG_SYSTEM_HEX2MEM_USAGE
fprintf(stderr, "Usage:\n");
fprintf(stderr, "\t%s [OPTIONS] <hexfile>\n", progname);
fprintf(stderr, "\t%s -h\n", progname);
fprintf(stderr, "Where:\n");
fprintf(stderr, "\t<hexfile>:\n");
fprintf(stderr, "\t\tThe file containing the Intel HEX data to be converted.\n");
fprintf(stderr, "\t-h:\n");
fprintf(stderr, "\t\tPrints this message and exits\n");
fprintf(stderr, "And [OPTIONS] include:\n");
fprintf(stderr, "\t-s <start address>\n");
fprintf(stderr, "\t\tSets the start memory address for the binary output. Hex\n");
fprintf(stderr, "\t\tdata is written to memory relative to this address. Default:\n");
fprintf(stderr, "\t\t0x%08x\n", CONFIG_SYSTEM_HEX2MEM_BASEADDR);
fprintf(stderr, "\t-e <end address>\n");
fprintf(stderr, "\t\tSets the maximum memory address (plus 1). This value is\n");
fprintf(stderr, "\t\tused to assure that the program does not write past the end\n");
fprintf(stderr, "\t\tof memory. The value zero disables error checking.\n");
fprintf(stderr, "\t\tDefault: 0x%08x\n", CONFIG_SYSTEM_HEX2MEM_ENDPADDR);
fprintf(stderr, "\t-w <swap code>\n");
fprintf(stderr, "\t\t(0) No swap, (1) swap bytes in 16-bit values, or (3) swap\n");
fprintf(stderr, "\t\tbytes in 32-bit values. Default: %d\n",
CONFIG_SYSTEM_HEX2MEM_SWAP);
#endif
exit(exitcode);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: hex2mem_main
*
* Description:
* Main entry point when hex2mem is built as an NSH built-in task.
*
* Input Parameters:
* Standard task inputs
*
* Returned Value
* EXIT_SUCESS on success; EXIT_FAILURE on failure
*
****************************************************************************/
#ifdef CONFIG_BUILD_KERNEL
int main(int argc, FAR char **argv)
#else
int hex2mem_main(int argc, char **argv)
#endif
{
struct lib_stdinstream_s stdinstream;
struct lib_memsostream_s memoutstream;
FAR const char *hexfile;
FAR char *endptr;
FAR FILE *instream;
unsigned long baseaddr;
unsigned long endpaddr;
unsigned long swap;
int option;
int ret;
/* Parse the command line options */
baseaddr = CONFIG_SYSTEM_HEX2MEM_BASEADDR;
endpaddr = CONFIG_SYSTEM_HEX2MEM_ENDPADDR;
swap = CONFIG_SYSTEM_HEX2MEM_SWAP;
while ((option = getopt(argc, argv, ":hs:e:w:")) != ERROR)
{
switch (option)
{
#ifdef CONFIG_SYSTEM_HEX2MEM_USAGE
case 'h':
show_usage(argv[0], EXIT_SUCCESS);
break;
#endif
case 's':
baseaddr = strtoul(optarg, &endptr, 16);
if (endptr == optarg)
{
fprintf(stderr, "ERROR: Invalid argument to the -s option\n");
show_usage(argv[0], EXIT_FAILURE);
}
break;
case 'e':
endpaddr = strtoul(optarg, &endptr, 16);
if (endptr == optarg)
{
fprintf(stderr, "ERROR: Invalid argument to the -e option\n");
show_usage(argv[0], EXIT_FAILURE);
}
break;
case 'w':
swap = strtoul(optarg, &endptr, 16);
if (endptr == optarg || swap > (unsigned long)HEX2BIN_SWAP32)
{
fprintf(stderr, "ERROR: Invalid argument to the -w option\n");
show_usage(argv[0], EXIT_FAILURE);
}
break;
case ':':
fprintf(stderr, "ERROR: Missing required argument\n");
show_usage(argv[0], EXIT_FAILURE);
break;
default:
case '?':
fprintf(stderr, "ERROR: Unrecognized option\n");
show_usage(argv[0], EXIT_FAILURE);
break;
}
}
/* There should be two final parameters remaining on the command line */
if (optind >= argc)
{
printf("ERROR: Missing required <hexfile> argument\n");
show_usage(argv[0], EXIT_FAILURE);
}
hexfile = argv[optind];
optind++;
if (optind < argc)
{
printf("ERROR: Garbage at end of command line\n");
show_usage(argv[0], EXIT_FAILURE);
}
/* Check memory addresses */
if (endpaddr <= baseaddr)
{
printf("ERROR: Memory end (+1) address must be AFTER memory base address\n");
show_usage(argv[0], EXIT_FAILURE);
}
/* Open the HEX file for reading */
instream = fopen(hexfile, "r");
if (instream == NULL)
{
int errcode = errno;
DEBUGASSERT(errcode > 0);
fprintf(stderr, "ERROR: Failed to open \"%s\" for reading: %d\n",
hexfile, errcode);
return -errcode;
}
/* Wrap the FILE stream as a standard stream; wrap the memory as a memory
* stream.
*/
lib_stdinstream(&stdinstream, instream);
lib_memsostream(&memoutstream, (FAR char *)baseaddr,
(int)(endpaddr - baseaddr));
/* And do the deed */
ret = hex2bin(&stdinstream.public, &memoutstream.public,
(uint32_t)baseaddr, (uint32_t)endpaddr,
(enum hex2bin_swap_e)swap);
if (ret < 0)
{
fprintf(stderr, "ERROR: Failed to convert \"%s\" to binary: %d\n",
ret);
}
/* Clean up and return */
fclose(instream);
return ret < 0 ? EXIT_FAILURE : EXIT_SUCCESS;
}
#endif /* CONFIG_SYSTEM_HEX2MEM_BUILTIN */
Reference in New Issue View Git Blame Copy Permalink