sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a2e76247fb
nuttx-apps/examples/adxl372_test/adxl372_test_main.c
Xiang Xiao 054cf3b1cb Change all sizeof(arr)/sizeof(arr[0]) to nitems 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-08-17 22:51:51 +03:00

545 lines
14 KiB
C
Raw Blame History

/****************************************************************************
* apps/examples/adxl372_test/adxl372_test_main.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <fcntl.h>
#include <sys/param.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <errno.h>
#include <nuttx/spi/spi.h>
#include <arch/board/board.h>
#include <nuttx/fs/fs.h>
#include <nuttx/sensors/adxl372.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define PASSED 0
#define SUB_PROMPT "stst >"
#define CRED "\x1b[31m"
#define CGREEN "\x1b[32m"
#define CYELLOW "\x1b[33m"
#define CBLUE "\x1b[34m"
#define CMAGENTA "\x1b[35m"
#define CCYAN "\x1b[36m"
#define CRESET "\x1b[0m"
/* Return codes */
#define RC_OPENFAIL (-1)
#define RC_OPENRONLY (-2)
#define RC_SEEKFAIL (-3)
#define RC_READFAIL (-4)
#define RC_IDFAIL (-5)
#define RC_SEEK2FAIL (-6)
#define RC_WRITEFAIL (-7)
#define RC_READ2FAIL (-8)
#define RC_WRMFAIL (-9)
#define RC_SEEK3FAIL (-10)
#define RC_READ3FAIL (-11)
#define RC_INVALPATH (-41)
#define RC_INVALPARM (-42)
/****************************************************************************
* Private types
****************************************************************************/
typedef CODE int (*test_ptr_t)(int, FAR char *);
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: subtest_prompt()
*
* Description:
* 1. Display the prompt.
* 2. Receive a character from the console port.
* 3. Filter the input character. Invalid characters convert to either
* '!' (error) of '*' (invalid character).
* 4. Echo the character.
*
****************************************************************************/
static char subtest_prompt(FAR char *prompt)
{
char c;
printf("%s", prompt);
fflush(stdout);
c = getchar();
if (c < 1)
{
c = '!';
}
else if ((c < 0x20 || c > 0x7e) && c != '\r')
{
c = '*';
}
if (c != '\r')
{
putchar(c);
}
printf("\n");
return c;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: adxl372_test
*
* Description:
* This function is public so that it can be called by board diagnostic
* programs that contain the ADXL372.
*
****************************************************************************/
static int adxl372_test(int is_interactive, FAR char *path)
{
int fd;
int ret;
int errcode;
int i;
char ch1 = 0;
struct XYZ
{
int16_t d[3];
};
unsigned char tstchars[] =
{
0x5e, 0xc5, 0x00
};
char bfr[32] __attribute__((aligned(2))); /* REVISIT: GCC dependent attribute */
FAR struct XYZ *pxyz = (FAR struct XYZ *)bfr;
int rc = PASSED;
int rc_step = PASSED;
printf("\nADXL372 accelerometer diagnostic started...\n");
fd = open (path, O_RDWR);
if (fd < 0 || (errno != EROFS && errno != 0))
{
errcode = errno;
printf(CRED "ERROR: Failed to open %s: %d" CRESET "\n", path, errcode);
return RC_OPENFAIL;
}
else if (errno == EROFS)
{
printf(CRED "ERROR: Accelerometer mounted as Read Only." CRESET "\n",
path, errno);
rc = RC_OPENRONLY;
}
printf("open errno=%d\n", errno);
do
{
/* read id register */
printf("Reading ADXL372 ID_REG...\n");
ret = lseek(fd, ADXL372_DEVID_AD, SEEK_SET);
if (ret < 0)
{
errcode = errno;
printf(CRED "ERROR: Failed to seek to reg 0x%02X in %s: %d"
CRESET "\n", ADXL372_DEVID_AD, path, errcode);
rc = RC_SEEKFAIL;
goto error_exit;
}
memset(bfr, 0xaa, sizeof(bfr));
ret = read(fd, bfr, 4); /* read the sensor id regs */
if (ret < 0)
{
errcode = errno;
printf(CRED "ERROR: Failed to read sensor ID from %s: %d"
CRESET "\n", path, errcode);
rc = RC_READFAIL;
goto error_exit;
}
if (bfr[0] != ADXL372_DEVID_AD_VALUE &&
bfr[1] != ADXL372_DEVID_MST_VALUE &&
bfr[2] != ADXL372_PARTID_VALUE)
{
printf(CRED "ERROR: Sensor ID is 0x%02X%02X%02X%02X, "
"expected 0x%02X%02X%02Xxx." CRESET "\n",
bfr[0], bfr[1], bfr[2], bfr[3],
ADXL372_DEVID_AD_VALUE, ADXL372_DEVID_MST_VALUE,
ADXL372_PARTID_VALUE);
if (rc == 0)
{
rc = RC_IDFAIL;
}
if (!is_interactive)
{
goto error_exit;
}
}
else
{
printf("Sensor ID 0x%02X%02X%02X%02X is correct!\n",
bfr[0], bfr[1], bfr[2], bfr[3]);
}
if (is_interactive)
{
ch1 = subtest_prompt("Press 'l' to repeat or enter to continue.\n"
SUB_PROMPT);
}
if (ch1 == 'x')
{
goto quick_exit;
}
}
while (ch1 == 'l');
do
{
/* Write and read a scratch register */
printf("Writing and reading a scratch register...\n");
ret = lseek(fd, ADXL372_SCRATCH, SEEK_SET);
if (ret < 0)
{
errcode = errno;
printf(CRED "ERROR: Failed to seek to reg 0x%02X in %s: %d"
CRESET "\n", ADXL372_SCRATCH, path, errcode);
rc = RC_SEEK2FAIL;
goto error_exit;
}
rc_step = PASSED;
for (i = 0; i < sizeof(tstchars); i++)
{
memset(bfr, 0xaa, sizeof(bfr));
bfr[0] = (char)tstchars[i];
ret = write(fd, bfr, 1); /* write the scratch register */
if (ret < 0 && rc != RC_OPENRONLY)
{
errcode = errno;
printf(CRED "ERROR: Write operation failed to %s: %d"
CRESET "\n", path, errcode);
rc = RC_WRITEFAIL;
goto error_exit;
}
memset(bfr, 0xaa, sizeof(bfr));
ret = read(fd, bfr, 1); /* read the scratch register */
if (ret < 0)
{
errcode = errno;
printf(CRED "ERROR: Read operation failed from %s: %d"
CRESET "\n", path, errcode);
rc = RC_READ2FAIL;
goto error_exit;
}
if (bfr[0] != (char)tstchars[i])
{
printf(CRED "ERROR: Wrote 0x%02X, read back 0x%02X."
CRESET "\n", tstchars[i], bfr[0]);
rc_step = RC_WRMFAIL;
if (rc == 0)
{
rc = RC_WRMFAIL;
}
if (!is_interactive)
{
goto error_exit;
}
}
}
if (rc_step == PASSED)
{
printf("Read/write test passed!\n");
}
if (is_interactive)
{
ch1 = subtest_prompt("Press 'l' to repeat or enter to continue.\n"
SUB_PROMPT);
}
if (ch1 == 'x')
{
goto quick_exit;
}
}
while (ch1 == 'l');
do
{
/* Read live data */
printf("Reading Live Data...\n");
ret = lseek(fd, 0, SEEK_END);
if (ret < 0)
{
errcode = errno;
printf(CRED "ERROR: Failed to seek to reg 0x%02X in %s: %d"
CRESET "\n", ADXL372_XDATA_H, path, errcode);
rc = RC_SEEK3FAIL;
goto error_exit;
}
memset(bfr, 0xaa, sizeof(bfr));
ret = read(fd, bfr, 6); /* read live accelerometer data */
if (ret < 0)
{
errcode = errno;
printf(CRED "ERROR: Read operation failed from %s: %d" CRESET "\n",
path, errcode);
rc = RC_READ3FAIL;
goto error_exit;
}
printf("ADXL372 = (%6d, %6d, %6d))\n",
pxyz->d[0], pxyz->d[1], pxyz->d[2]);
printf("ADXL372 = (0x%04X, 0x%04X, 0x%04X)\n",
pxyz->d[0], pxyz->d[1], pxyz->d[2]);
printf("ADXL372 raw = (0x%02X%02X, 0x%02X%02X, 0x%02X%02X)\n",
bfr[1], bfr[0], bfr[3], bfr[2], bfr[5], bfr[4]);
if (is_interactive)
{
ch1 = subtest_prompt("Press 'l' to repeat or enter to continue.\n"
SUB_PROMPT);
}
if (ch1 == 'x')
{
goto quick_exit;
}
}
while (ch1 == 'l');
error_exit:
quick_exit:
close(fd);
if (rc == PASSED)
{
printf(CGREEN
"ADXL372 accelerometer diagnostic completed successfully."
CRESET "\n");
}
return rc;
}
/****************************************************************************
* Name: adxl372_test_main
*
* Description:
* This program defaults to testing in interactive mode.
* To run in batch mode use a first parameter of b. E.g. adxl372_test -b
*
****************************************************************************/
int main(int argc, FAR char *argv[])
{
int rc = 0;
int step_rc = 0;
uint8_t ch;
int is_interactive = 1; /* Program defaults to interactive */
int flag_present = 0; /* Default to no flag coded */
uint32_t ui;
struct stat sbuf;
/* The two arrays below must be synchronized */
test_ptr_t test_ptr_array[] = /* Array of test programs */
{
adxl372_test, /* ADXL372 accelerometer tests */
};
FAR char *test_path[nitems(test_ptr_array)];
if (argc < 1 || *argv[1] == 0 || *(argv[1] + 1) == 0)
{
goto print_help;
}
/* We have at least 1 parameter which has at least two characters. */
if (*argv[1] == '-')
{
flag_present = 1;
if (*(argv[1] + 1) == 'b')
{
is_interactive = 0;
}
else if (*(argv[1] + 1) == 'i')
{
is_interactive = 1;
}
else
{
goto print_help;
}
}
if (flag_present && argc < 2)
{
goto print_help;
}
test_path[0] = argv[1 + flag_present];
printf("path=%s\n", test_path[0]);
if (stat(test_path[0], &sbuf))
{
printf(CRED "Error: Accelerometer path not found. Path=%s" CRESET "\n",
test_path[0]);
rc = RC_INVALPATH;
}
if (rc)
{
return rc;
}
if (is_interactive)
{
printf("LSM330 diagnostic started in interactive mode...\n");
ch = 0;
while (ch != 'x')
{
printf("Enter test section...\n");
printf(" 1 = SPI ADXL Tests.\n");
printf(" i = Toggle interactive mode.\n");
printf(" x = Exit. (at anytime).\n");
printf("stst> ");
fflush(stdout);
ch = getchar();
if (ch < 1)
{
ch = '!';
}
else if ((ch < 0x20 || ch > 0x7e) && ch != '\r')
{
ch = '*';
}
if (ch != '\r')
{
putchar(ch);
}
printf("\n");
if (ch == 'x')
{
return 0;
}
ui = ch - 0x31; /* make index zero origin */
if (ch == 'i')
{
if (is_interactive == 0)
{
is_interactive = 1;
printf("Set to interactive mode.\n");
}
else
{
is_interactive = 0;
printf("Set to batch mode.\n");
}
}
else if (ui >= nitems(test_ptr_array))
{
printf("Huh?\n");
}
else
{
if (test_ptr_array[ui] == 0)
{
printf ("Test not supported yet.\n");
}
else
{
test_ptr_array[ui](is_interactive, test_path[ui]);
}
}
}
}
else /* not interactive mode */
{
printf("ADXL372 sensor diagnostic started in batch mode...\n");
for (ui = 0; ui < nitems(test_ptr_array); ui++)
{
step_rc = 0;
if (test_ptr_array[ui] != 0)
{
/* call the next test routine */
step_rc = test_ptr_array[ui](is_interactive, test_path[ui]);
}
if (step_rc != 0 && rc == 0)
{
rc = step_rc;
}
sleep(1);
}
}
printf("ADXL372 sensor diagnostic completed.\n");
return rc;
print_help:
printf("Usage...\n");
printf("adxl372_test [-b | -i] <dev_path>\n");
printf(" -b = batch mode execution\n");
printf(" -i = interactive mode execution (default)\n");
printf(" <dev_path> = Device path for the ADXL372 accelerometer\n");
printf(" Example:\n");
printf(" adxl372_test -b /dev/adxl372_0\n");
return RC_INVALPARM;
}
Reference in New Issue View Git Blame Copy Permalink