nuttx-apps/examples/discover/discover_main.c
Xiang Xiao cfc005a460 arp: Remove the unnecessary inclusion of nuttx/net/arp
and change the remain inclusion to netinet/arp.h

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-16 22:11:10 +02:00

173 lines
4.9 KiB
C

/****************************************************************************
* apps/examples/discover/discover_main.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <time.h>
#include <debug.h>
#include <net/if.h>
#include <netinet/in.h>
#include "netutils/netlib.h"
#include "netutils/discover.h"
#ifdef CONFIG_EXAMPLES_DISCOVER_DHCPC
# include <arpa/inet.h>
#endif
/* Here we include the header file for the application(s) we use in
* our project as defined in the config/<board-name>/defconfig file
*/
/* DHCPC may be used in conjunction with any other feature (or not) */
#ifdef CONFIG_EXAMPLES_DISCOVER_DHCPC
# include "netutils/dhcpc.h"
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* discover_main
****************************************************************************/
int main(int argc, FAR char *argv[])
{
/* If this task is excecutated as an NSH built-in function, then the
* network has already been configured by NSH's start-up logic.
*/
#ifndef CONFIG_NSH_NETINIT
struct in_addr addr;
#if defined(CONFIG_EXAMPLES_DISCOVER_DHCPC) || defined(CONFIG_EXAMPLES_DISCOVER_NOMAC)
uint8_t mac[IFHWADDRLEN];
#endif
#ifdef CONFIG_EXAMPLES_DISCOVER_DHCPC
void *handle;
#endif
/* Many embedded network interfaces must have a software assigned MAC */
#ifdef CONFIG_EXAMPLES_DISCOVER_NOMAC
mac[0] = 0x00;
mac[1] = 0xe0;
mac[2] = 0xde;
mac[3] = 0xad;
mac[4] = 0xbe;
mac[5] = 0xef;
netlib_setmacaddr("eth0", mac);
#endif
/* Set up our host address */
#ifdef CONFIG_EXAMPLES_DISCOVER_DHCPC
addr.s_addr = 0;
#else
addr.s_addr = htonl(CONFIG_EXAMPLES_DISCOVER_IPADDR);
#endif
netlib_set_ipv4addr("eth0", &addr);
/* Set up the default router address */
addr.s_addr = htonl(CONFIG_EXAMPLES_DISCOVER_DRIPADDR);
netlib_set_dripv4addr("eth0", &addr);
/* Setup the subnet mask */
addr.s_addr = htonl(CONFIG_EXAMPLES_DISCOVER_NETMASK);
netlib_set_ipv4netmask("eth0", &addr);
/* New versions of netlib_set_ipvXaddr will not bring the network up,
* So ensure the network is really up at this point.
*/
netlib_ifup("eth0");
#ifdef CONFIG_EXAMPLES_DISCOVER_DHCPC
/* Get the MAC address of the NIC */
netlib_getmacaddr("eth0", mac);
/* Set up the DHCPC modules */
handle = dhcpc_open("eth0", &mac, IFHWADDRLEN);
/* Get an IP address.
* Note: there is no logic here for renewing the address in this
* example. The address should be renewed in ds.lease_time/2 seconds.
*/
printf("Getting IP address\n");
if (handle)
{
struct dhcpc_state ds;
char inetaddr[INET_ADDRSTRLEN];
dhcpc_request(handle, &ds);
netlib_set_ipv4addr("eth0", &ds.ipaddr);
if (ds.netmask.s_addr != 0)
{
netlib_set_ipv4netmask("eth0", &ds.netmask);
}
if (ds.default_router.s_addr != 0)
{
netlib_set_dripv4addr("eth0", &ds.default_router);
}
if (ds.dnsaddr.s_addr != 0)
{
netlib_set_ipv4dnsaddr(&ds.dnsaddr);
}
dhcpc_close(handle);
printf("IP: %s\n", inet_ntoa_r(ds.ipaddr, inetaddr, sizeof(inetaddr)));
}
#endif /* CONFIG_EXAMPLES_DISCOVER_DHCPC */
#endif /* CONFIG_NSH_NETINIT */
if (discover_start(NULL) < 0)
{
nerr("ERROR: Could not start discover daemon.\n");
return ERROR;
}
return OK;
}