sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a3e27eb1a0
nuttx-apps/examples/tcpblaster/Kconfig
YAMAMOTO Takashi e7156be066 Change the defaults of stack size configs to DEFAULT_TASK_STACKSIZE 
This commit changes only ones with the default 2048 and
leaves the others.
E.g. this leaves SYSTEM_RAMTEST_STACKSIZE, whose default is 1024.
I guess those need to be inspected one-by-one.
2020-03-27 02:43:11 -05:00

599 lines
19 KiB
Plaintext
Raw Blame History

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
config EXAMPLES_TCPBLASTER
tristate "TCP Performance Test"
default n
select LIBC_FLOATINGPOINT
depends on NET_TCP
---help---
Enable the network test example
if EXAMPLES_TCPBLASTER
config EXAMPLES_TCPBLASTER_SENDSIZE
int "Payload size"
default 4096
---help---
This setting determines size of each TCP send that is sent to the server.
config EXAMPLES_TCPBLASTER_GROUPSIZE
int "Group size"
default 50
---help---
This setting determines how many TCP sends are sent to the server before printing statistics
and starting again.
config EXAMPLES_TCPBLASTER_PROGNAME1
string "Target1 program name"
default "tcpserver" if EXAMPLES_TCPBLASTER_SERVER
default "tcpclient" if !EXAMPLES_TCPBLASTER_SERVER
---help---
This is the name of the program that will be used when the TcpBlaster
program is installed for target1.
config EXAMPLES_TCPBLASTER_STACKSIZE1
int "Target1 stack size"
default DEFAULT_TASK_STACKSIZE
config EXAMPLES_TCPBLASTER_PRIORITY1
int "Target1 priority"
default 100
config EXAMPLES_TCPBLASTER_POLLOUT
bool "Use poll() to pace output"
default n
---help---
Client will use poll() to verify that send() will not block. This
does not improve performance (in fact, it will degrade perform
slightly). But it is useful for verifying that poll() can be used
to pace output.
config EXAMPLES_TCPBLASTER_POLLIN
bool "Use poll() to pace input"
default n
---help---
Client will use poll() to verify that recv() will not block. This
does not improve performance (in fact, it will degrade perform
slightly). But it is useful for verifying that poll() can be used
to pace input.
config EXAMPLES_TCPBLASTER_LOOPBACK
bool "Loopback test"
default n
depends on NET_LOOPBACK || IEEE802154_LOOPBACK || PKTRADIO_LOOPBACK
---help---
Perform the test using the local loopback device. In this case,
both the client and the server reside on the target.
# No server if loopback; No second target if loopback
if !EXAMPLES_TCPBLASTER_LOOPBACK
config EXAMPLES_TCPBLASTER_SERVER
bool "Target1 is server"
default n
depends on !EXAMPLES_TCPBLASTER_LOOPBACK
---help---
Select to use the host as the client side of the test. Default: The
target is the client side of the test
config EXAMPLES_TCPBLASTER_TARGET2
bool "Second endpoint is a target"
default n
---help---
By default, the host PC is configured as the second endpoint of the
TCPBLASTER. If this option is selected, then the second endpoint
will be built into the FLASH image as well. This means that you
can use two target boards to run the test with no host PC
involvement.
if EXAMPLES_TCPBLASTER_TARGET2
config EXAMPLES_TCPBLASTER_PROGNAME2
string "Target2 program name"
default "tcpserver" if !EXAMPLES_TCPBLASTER_SERVER
default "tcpclient" if EXAMPLES_TCPBLASTER_SERVER
---help---
This is the name of the Target2 program that will be used when the
NSH ELF program is installed.
config EXAMPLES_TCPBLASTER_PRIORITY2
int "Target2 task priority"
default 100
config EXAMPLES_TCPBLASTER_STACKSIZE2
int "Target2 stack size"
default DEFAULT_TASK_STACKSIZE
endif # EXAMPLES_TCPBLASTER_TARGET2
endif # !EXAMPLES_TCPBLASTER_LOOPBACK
if EXAMPLES_TCPBLASTER_LOOPBACK
config EXAMPLES_TCPBLASTER_DAEMON_STACKSIZE
int "Server daemon stack size"
default DEFAULT_TASK_STACKSIZE
config EXAMPLES_TCPBLASTER_DAEMON_PRIORITY
int "Server daemon priority"
default 100
#endif
endif # EXAMPLES_TCPBLASTER_LOOPBACK
config EXAMPLES_TCPBLASTER_DEVNAME
string "Network device"
default "eth0"
choice
prompt "IP Domain"
default EXAMPLES_TCPBLASTER_IPv4 if NET_IPv4
default EXAMPLES_TCPBLASTER_IPv6 if NET_IPv6 && !NET_IPv4
config EXAMPLES_TCPBLASTER_IPv4
bool "IPv4"
depends on NET_IPv4
config EXAMPLES_TCPBLASTER_IPv6
bool "IPv6"
depends on NET_IPv6
endchoice # IP Domain
# No hardware initialization if loopback
config EXAMPLES_TCPBLASTER_INIT
bool "Initialize network"
default n if NSH_NETINIT
default y if !NSH_NETINIT
depends on !EXAMPLES_TCPBLASTER_LOOPBACK
---help---
Include logic to initialize the network. This should not be done if
the network is already initialized when tcpblaster runs. This is
usually the case, for example, when tcpblaster is run as an NSH built-
in task.
config EXAMPLES_TCPBLASTER_NOMAC
bool "Use Canned MAC Address"
default n
depends on EXAMPLES_TCPBLASTER_INIT
if EXAMPLES_TCPBLASTER_IPv4
comment "IPv4 addresses"
if EXAMPLES_TCPBLASTER_INIT
config EXAMPLES_TCPBLASTER_IPADDR
hex "Target IP address"
default 0x0a000002
config EXAMPLES_TCPBLASTER_DRIPADDR
hex "Default Router IP address (Gateway)"
default 0x0a000001
config EXAMPLES_TCPBLASTER_NETMASK
hex "Network Mask"
default 0xffffff00
endif # EXAMPLES_TCPBLASTER_INIT
# No server if loopback
if !EXAMPLES_TCPBLASTER_LOOPBACK
config EXAMPLES_TCPBLASTER_SERVERIP
hex "Server IP Address"
default 0x0a000001 if !EXAMPLES_TCPBLASTER_SERVER
default 0x0a000002 if EXAMPLES_TCPBLASTER_SERVER
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
endif # !EXAMPLES_TCPBLASTER_LOOPBACK
endif # EXAMPLES_TCPBLASTER_IPv4
if EXAMPLES_TCPBLASTER_IPv6
if !NET_ICMPv6_AUTOCONF
comment "Target IPv6 address"
if EXAMPLES_TCPBLASTER_INIT
config EXAMPLES_TCPBLASTER_IPv6ADDR_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the first of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_TCPBLASTER_IPv6ADDR_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the second of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_TCPBLASTER_IPv6ADDR_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the third of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_TCPBLASTER_IPv6ADDR_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the fourth of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_TCPBLASTER_IPv6ADDR_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the fifth of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_TCPBLASTER_IPv6ADDR_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the sixth of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_TCPBLASTER_IPv6ADDR_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the seventh of the 8-values. The
default for all eight values is fc00::2.
config EXAMPLES_TCPBLASTER_IPv6ADDR_8
hex "[7]"
default 0x0002
range 0x0 0xffff
---help---
Target IPv6 address. This is a 16-bit integer value in host order.
Each of the eight values forming the full IP address must be
specified individually. This is the last of the 8-values. The
default for all eight values is fc00::2.
comment "Router IPv6 address"
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the first of the
8-values. The default for all eight values is fc00::1.
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the second of the
8-values. The default for all eight values is fc00::1.
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the third of the
8-values. The default for all eight values is fc00::1.
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the fourth of the
8-values. The default for all eight values is fc00::1.
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the fifth of the
8-values. The default for all eight values is fc00::1.
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the sixth of the
8-values. The default for all eight values is fc00::1.
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the seventh of the
8-values. The default for all eight values is fc00::1.
config EXAMPLES_TCPBLASTER_DRIPv6ADDR_8
hex "[7]"
default 0x0001
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the last of the
8-values. The default for all eight values is fc00::1.
comment "IPv6 Network mask"
config EXAMPLES_TCPBLASTER_IPv6NETMASK_1
hex "[0]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the first of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_TCPBLASTER_IPv6NETMASK_2
hex "[1]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the second of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_TCPBLASTER_IPv6NETMASK_3
hex "[2]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the third of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_TCPBLASTER_IPv6NETMASK_4
hex "[3]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the fourth of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_TCPBLASTER_IPv6NETMASK_5
hex "[4]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the fifth of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_TCPBLASTER_IPv6NETMASK_6
hex "[5]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the sixth of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_TCPBLASTER_IPv6NETMASK_7
hex "[6]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the seventh of the 8-values. The default for
all eight values is fe00::0.
config EXAMPLES_TCPBLASTER_IPv6NETMASK_8
hex "[7]"
default 0xff80
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the eighth of the 8-values. The default for
all eight values is fe00::0.
endif # NET_ICMPv6_AUTOCONF
endif # EXAMPLES_TCPBLASTER_INIT
# Addresses are well known if loopback is used.
if !EXAMPLES_TCPBLASTER_LOOPBACK || !NET_LOOPBACK
comment "Server IPv6 address"
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the first of the 8-values.
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the second of the 8-values.
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the Third of the 8-values.
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the fourth of the 8-values.
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the fifth of the 8-values.
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the sixth of the 8-values.
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the seventh of the 8-values.
config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_8
hex "[7]"
default 0x0001 if !EXAMPLES_TCPBLASTER_SERVER
default 0x0002 if EXAMPLES_TCPBLASTER_SERVER
range 0x0 0xffff
---help---
IP address of the server. If the target is the server, then
EXAMPLES_TCPBLASTER_SERVERIP should be the same as
EXAMPLES_TCPBLASTER_IPADDR (default). If the target is the client,
then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
host PC IP address (possibly the gateway address,
EXAMPLES_TCPBLASTER_DRIPADDR?).
This is a 16-bit integer value in host order. Each of the eight
values forming the full IP address must be specified individually.
This is the last of the 8-values.
endif # !EXAMPLES_TCPBLASTER_LOOPBACK
endif # EXAMPLES_TCPBLASTER_IPv6
config EXAMPLES_TCPBLASTER_SERVER_PORTNO
int "Server port number"
default 5471
endif # EXAMPLES_TCPBLASTER
Reference in New Issue View Git Blame Copy Permalink