e467b61785
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4964 42af7a65-404d-4744-a932-0658087f49c3
271 lines
9.5 KiB
C
271 lines
9.5 KiB
C
/*
|
|
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
|
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* File: $Id: mbfunccoils.c,v 1.8 2007/02/18 23:47:16 wolti Exp $
|
|
*/
|
|
|
|
/* ----------------------- System includes ----------------------------------*/
|
|
#include <nuttx/config.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
/* ----------------------- Platform includes --------------------------------*/
|
|
#include "port.h"
|
|
|
|
/* ----------------------- Modbus includes ----------------------------------*/
|
|
#include <apps/modbus/mb.h>
|
|
#include <apps/modbus/mbframe.h>
|
|
#include <apps/modbus/mbproto.h>
|
|
|
|
/* ----------------------- Defines ------------------------------------------*/
|
|
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
|
|
#define MB_PDU_FUNC_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_FUNC_READ_SIZE ( 4 )
|
|
#define MB_PDU_FUNC_READ_COILCNT_MAX ( 0x07D0 )
|
|
|
|
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
|
|
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
|
|
|
|
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
|
|
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
|
|
#define MB_PDU_FUNC_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
|
|
#define MB_PDU_FUNC_WRITE_MUL_SIZE_MIN ( 5 )
|
|
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ( 0x07B0 )
|
|
|
|
/* ----------------------- Static functions ---------------------------------*/
|
|
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
|
|
|
/* ----------------------- Start implementation -----------------------------*/
|
|
|
|
#ifdef CONFIG_MB_FUNC_READ_COILS_ENABLED
|
|
|
|
eMBException
|
|
eMBFuncReadCoils( uint8_t * pucFrame, uint16_t * usLen )
|
|
{
|
|
uint16_t usRegAddress;
|
|
uint16_t usCoilCount;
|
|
uint8_t ucNBytes;
|
|
uint8_t *pucFrameCur;
|
|
|
|
eMBException eStatus = MB_EX_NONE;
|
|
eMBErrorCode eRegStatus;
|
|
|
|
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
|
|
{
|
|
usRegAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
|
|
usRegAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
|
|
usRegAddress++;
|
|
|
|
usCoilCount = ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF] << 8 );
|
|
usCoilCount |= ( uint16_t )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF + 1] );
|
|
|
|
/* Check if the number of registers to read is valid. If not
|
|
* return Modbus illegal data value exception.
|
|
*/
|
|
if( ( usCoilCount >= 1 ) &&
|
|
( usCoilCount < MB_PDU_FUNC_READ_COILCNT_MAX ) )
|
|
{
|
|
/* Set the current PDU data pointer to the beginning. */
|
|
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
|
|
*usLen = MB_PDU_FUNC_OFF;
|
|
|
|
/* First byte contains the function code. */
|
|
*pucFrameCur++ = MB_FUNC_READ_COILS;
|
|
*usLen += 1;
|
|
|
|
/* Test if the quantity of coils is a multiple of 8. If not last
|
|
* byte is only partially field with unused coils set to zero. */
|
|
if( ( usCoilCount & 0x0007 ) != 0 )
|
|
{
|
|
ucNBytes = ( uint8_t )( usCoilCount / 8 + 1 );
|
|
}
|
|
else
|
|
{
|
|
ucNBytes = ( uint8_t )( usCoilCount / 8 );
|
|
}
|
|
*pucFrameCur++ = ucNBytes;
|
|
*usLen += 1;
|
|
|
|
eRegStatus =
|
|
eMBRegCoilsCB( pucFrameCur, usRegAddress, usCoilCount,
|
|
MB_REG_READ );
|
|
|
|
/* If an error occured convert it into a Modbus exception. */
|
|
if( eRegStatus != MB_ENOERR )
|
|
{
|
|
eStatus = prveMBError2Exception( eRegStatus );
|
|
}
|
|
else
|
|
{
|
|
/* The response contains the function code, the starting address
|
|
* and the quantity of registers. We reuse the old values in the
|
|
* buffer because they are still valid. */
|
|
*usLen += ucNBytes;;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Can't be a valid read coil register request because the length
|
|
* is incorrect. */
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
#ifdef CONFIG_MB_FUNC_WRITE_COIL_ENABLED
|
|
eMBException
|
|
eMBFuncWriteCoil( uint8_t * pucFrame, uint16_t * usLen )
|
|
{
|
|
uint16_t usRegAddress;
|
|
uint8_t ucBuf[2];
|
|
|
|
eMBException eStatus = MB_EX_NONE;
|
|
eMBErrorCode eRegStatus;
|
|
|
|
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
|
|
{
|
|
usRegAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
|
|
usRegAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
|
|
usRegAddress++;
|
|
|
|
if( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF + 1] == 0x00 ) &&
|
|
( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF ) ||
|
|
( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0x00 ) ) )
|
|
{
|
|
ucBuf[1] = 0;
|
|
if( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF )
|
|
{
|
|
ucBuf[0] = 1;
|
|
}
|
|
else
|
|
{
|
|
ucBuf[0] = 0;
|
|
}
|
|
eRegStatus =
|
|
eMBRegCoilsCB( &ucBuf[0], usRegAddress, 1, MB_REG_WRITE );
|
|
|
|
/* If an error occured convert it into a Modbus exception. */
|
|
if( eRegStatus != MB_ENOERR )
|
|
{
|
|
eStatus = prveMBError2Exception( eRegStatus );
|
|
}
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Can't be a valid write coil register request because the length
|
|
* is incorrect. */
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED
|
|
eMBException
|
|
eMBFuncWriteMultipleCoils( uint8_t * pucFrame, uint16_t * usLen )
|
|
{
|
|
uint16_t usRegAddress;
|
|
uint16_t usCoilCnt;
|
|
uint8_t ucByteCount;
|
|
uint8_t ucByteCountVerify;
|
|
|
|
eMBException eStatus = MB_EX_NONE;
|
|
eMBErrorCode eRegStatus;
|
|
|
|
if( *usLen > ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
|
|
{
|
|
usRegAddress = ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
|
|
usRegAddress |= ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
|
|
usRegAddress++;
|
|
|
|
usCoilCnt = ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
|
|
usCoilCnt |= ( uint16_t )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
|
|
|
|
ucByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
|
|
|
|
/* Compute the number of expected bytes in the request. */
|
|
if( ( usCoilCnt & 0x0007 ) != 0 )
|
|
{
|
|
ucByteCountVerify = ( uint8_t )( usCoilCnt / 8 + 1 );
|
|
}
|
|
else
|
|
{
|
|
ucByteCountVerify = ( uint8_t )( usCoilCnt / 8 );
|
|
}
|
|
|
|
if( ( usCoilCnt >= 1 ) &&
|
|
( usCoilCnt <= MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ) &&
|
|
( ucByteCountVerify == ucByteCount ) )
|
|
{
|
|
eRegStatus =
|
|
eMBRegCoilsCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
|
|
usRegAddress, usCoilCnt, MB_REG_WRITE );
|
|
|
|
/* If an error occured convert it into a Modbus exception. */
|
|
if( eRegStatus != MB_ENOERR )
|
|
{
|
|
eStatus = prveMBError2Exception( eRegStatus );
|
|
}
|
|
else
|
|
{
|
|
/* The response contains the function code, the starting address
|
|
* and the quantity of registers. We reuse the old values in the
|
|
* buffer because they are still valid. */
|
|
*usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Can't be a valid write coil register request because the length
|
|
* is incorrect. */
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
#endif
|
|
|
|
#endif
|