95f32fd018
Replace all fwrite/fread/fgets/... to write/read/...
Before:
```
text data bss dec hex filename
109827 601 6608 117036 1c92c nuttx/nuttx
```
After:
```
text data bss dec hex filename
108053 601 6608 115262 1c23e nuttx/nuttx
```
After with CONFIG_FILE_STREAM disabled:
```
text data bss dec hex filename
105667 601 6608 112876 1b8ec nuttx/nuttx
```
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
|
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Make.defs | ||
| Makefile | ||
| nsh_main.c | ||
| README.md | ||
| sh_main.c | ||
System / nsh NuttShell (NSH)
Basic Configuration
This directory provides an example of how to configure and use the NuttShell
(NSH) application. NSH is a simple shell application. NSH is described in its
own README located at apps/nshlib/README.md. This function is enabled with:
CONFIG_SYSTEM_NSH=y
Applications using this example will need to provide an defconfig file in the
configuration directory with instruction to build the NSH library like:
CONFIG_NSH_LIBRARY=y
Other Configuration Requirements
Note: If the NSH serial console is used, then following is also required to
build the readline() library:
CONFIG_SYSTEM_READLINE=y
And if networking is included:
CONFIG_NETUTILS_NETLIB=y
CONFIG_NETUTILS_DHCPC=y
CONFIG_NETDB_DNSCLIENT=y
CONFIG_NETUTILS_TFTPC=y
CONFIG_NETUTILS_WEBCLIENT=y
If the Telnet console is enabled, then the defconfig file should also include:
CONFIG_NETUTILS_TELNETD=y
Also if the Telnet console is enabled, make sure that you have the following set in the NuttX configuration file or else the performance will be very bad (because there will be only one character per TCP transfer):
CONFIG_STDIO_BUFFER_SIZE- Some value>= 64CONFIG_STDIO_LINEBUFFER=y