77 lines
3.4 KiB
Plaintext
Executable File
77 lines
3.4 KiB
Plaintext
Executable File
system/usbmsc
|
|
^^^^^^^^^^^^^^^
|
|
|
|
This add-on registers a block device driver, then exports the block
|
|
the device using the USB storage class driver. In order to use this
|
|
add-on, your board-specific logic must provide the function:
|
|
|
|
void usbmsc_archinitialize(void);
|
|
|
|
This function will be called by the system/usbmsc in order to
|
|
do the actual registration of the block device drivers. For examples
|
|
of the implementation of usbmsc_archinitialize() see
|
|
configs/mcu123-lpc124x/src/up_usbmsc.c or
|
|
configs/stm3210e-eval/src/usbmsc.c
|
|
|
|
Configuration options:
|
|
|
|
CONFIG_NSH_BUILTIN_APPS
|
|
This add-on can be built as two NSH "built-in" commands if this option
|
|
is selected: 'msconn' will connect the USB mass storage device; 'msdis'
|
|
will disconnect the USB storage device.
|
|
CONFIG_SYSTEM_USBMSC_NLUNS
|
|
Defines the number of logical units (LUNs) exported by the USB storage
|
|
driver. Each LUN corresponds to one exported block driver (or partition
|
|
of a block driver). May be 1, 2, or 3. Default is 1.
|
|
CONFIG_SYSTEM_USBMSC_DEVMINOR1
|
|
The minor device number of the block driver for the first LUN. For
|
|
example, N in /dev/mmcsdN. Used for registering the block driver. Default
|
|
is zero.
|
|
CONFIG_SYSTEM_USBMSC_DEVPATH1
|
|
The full path to the registered block driver. Default is "/dev/mmcsd0"
|
|
CONFIG_SYSTEM_USBMSC_DEVMINOR2 and CONFIG_SYSTEM_USBMSC_DEVPATH2
|
|
Similar parameters that would have to be provided if CONFIG_SYSTEM_USBMSC_NLUNS
|
|
is 2 or 3. No defaults.
|
|
CONFIG_SYSTEM_USBMSC_DEVMINOR3 and CONFIG_SYSTEM_USBMSC_DEVPATH3
|
|
Similar parameters that would have to be provided if CONFIG_SYSTEM_USBMSC_NLUNS
|
|
is 3. No defaults.
|
|
CONFIG_SYSTEM_USBMSC_DEBUGMM
|
|
Enables some debug tests to check for memory usage and memory leaks.
|
|
|
|
If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
|
|
the code will also manage the USB trace output. The amount of trace output
|
|
can be controlled using:
|
|
|
|
CONFIG_SYSTEM_USBMSC_TRACEINIT
|
|
Show initialization events
|
|
CONFIG_SYSTEM_USBMSC_TRACECLASS
|
|
Show class driver events
|
|
CONFIG_SYSTEM_USBMSC_TRACETRANSFERS
|
|
Show data transfer events
|
|
CONFIG_SYSTEM_USBMSC_TRACECONTROLLER
|
|
Show controller events
|
|
CONFIG_SYSTEM_USBMSC_TRACEINTERRUPTS
|
|
Show interrupt-related events.
|
|
|
|
Error results are always shown in the trace output
|
|
|
|
NOTE 1: When built as an NSH add-on command (CONFIG_NSH_BUILTIN_APPS=y),
|
|
Caution should be used to assure that the SD drive (or other storage device) is
|
|
not in use when the USB storage device is configured. Specifically, the SD
|
|
driver should be unmounted like:
|
|
|
|
nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Card is mounted in NSH
|
|
...
|
|
nsh> umount /mnd/sdcard # Unmount before connecting USB!!!
|
|
nsh> msconn # Connect the USB storage device
|
|
...
|
|
nsh> msdis # Disconnect USB storate device
|
|
nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Restore the mount
|
|
|
|
Failure to do this could result in corruption of the SD card format.
|
|
|
|
NOTE 2: This add-on used internal USB device driver interfaces. As such,
|
|
it relies on internal OS interfaces that are not normally available to a
|
|
user-space program. As a result, this add-on cannot be used if a
|
|
NuttX is built as a protected, supervisor kernel (CONFIG_NUTTX_KERNEL).
|