sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
f310ebe9b1
nuttx-apps/examples/slcd/slcd_main.c

313 lines
8.5 KiB
C
Raw Blame History

/****************************************************************************
* examples/clcd/slcd_main.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/ioctl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <nuttx/lcd/slcd_codec.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef EXAMPLES_SLCD_DEVNAME
# define EXAMPLES_SLCD_DEVNAME "/dev/slcd"
#endif
/****************************************************************************
* Private Typs
****************************************************************************/
/* All state information for this test is kept within the following structure
* in order create a namespace and to minimize the possibility of name
* collisions.
*/
struct slcd_test_s
{
struct lib_outstream_s stream; /* Stream to use for all output */
struct slcd_geometry_s geo; /* Size of the SLCD (rows x columns) */
int fd; /* File descriptor or the open SLCD device */
/* The I/O buffer */
uint8_t buffer[CONFIG_EXAMPLES_SLCD_BUFSIZE];
};
/****************************************************************************
* Private Data
****************************************************************************/
static struct slcd_test_s g_slcdtest;
static const char g_slcdhello[] = "Hello";
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: slcd_dumpbuffer
*
* Description:
* Do a pretty buffer dump
*
****************************************************************************/
void slcd_dumpbuffer(FAR const char *msg, FAR const uint8_t *buffer, unsigned int buflen)
{
int i;
int j;
int k;
printf("%s (%p):\n", msg, buffer);
for (i = 0; i < buflen; i += 32)
{
printf("%04x: ", i);
for (j = 0; j < 32; j++)
{
k = i + j;
if (j == 16)
{
printf(" ");
}
if (k < buflen)
{
printf("%02x", buffer[k]);
}
else
{
printf(" ");
}
}
printf(" ");
for (j = 0; j < 32; j++)
{
k = i + j;
if (j == 16)
{
printf(" ");
}
if (k < buflen)
{
if (buffer[k] >= 0x20 && buffer[k] < 0x7f)
{
printf("%c", buffer[k]);
}
else
{
printf(".");
}
}
}
printf("\n");
}
}
/****************************************************************************
* Name: slcd_flush
****************************************************************************/
static int slcd_flush(FAR struct lib_outstream_s *stream)
{
FAR struct slcd_test_s *priv = (FAR struct slcd_test_s *)stream;
FAR const uint8_t *buffer;
ssize_t nwritten;
ssize_t remaining;
/* Loop until all bytes were written (handling both partial and interrupted
* writes).
*/
remaining = stream->nput;
buffer = priv->buffer;
slcd_dumpbuffer("WRITING", buffer, remaining);
while (remaining > 0)
{
nwritten = write(priv->fd, buffer, remaining);
if (nwritten < 0)
{
int errcode = errno;
printf("write failed: %d\n", errcode);
if (errcode != EINTR)
{
exit(EXIT_FAILURE);
}
}
else
{
remaining -= nwritten;
buffer += nwritten;
}
}
/* Reset the stream */
stream->nput = 0;
return OK;
}
/****************************************************************************
* Name: slcd_putc
****************************************************************************/
static void slcd_putc(FAR struct lib_outstream_s *stream, int ch)
{
FAR struct slcd_test_s *priv = (FAR struct slcd_test_s *)stream;
/* Write the character to the buffer */
priv->buffer[stream->nput] = ch;
stream->nput++;
priv->buffer[stream->nput] = '\0';
/* If the buffer is full, flush it */
if (stream->nput >= CONFIG_EXAMPLES_SLCD_BUFSIZE)
{
(void)slcd_flush(stream);
}
}
/****************************************************************************
* Name: slcd_puts
****************************************************************************/
static void slcd_puts(FAR struct lib_outstream_s *outstream,
FAR const char *str)
{
for (; *str; str++)
{
slcd_put((int)*str, outstream);
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* slcd_main
****************************************************************************/
int slcd_main(int argc, char *argv[])
{
FAR struct slcd_test_s *priv = &g_slcdtest;
FAR const char *str = g_slcdhello;
int ret;
/* Parse the command line. For now, only a single optional string argument
* is supported.
*/
#if defined(CONFIG_NSH_BUILTIN_APPS)
if (argc > 1)
{
str = argv[1];
}
#endif
/* Initialize the output stream */
memset(priv, 0, sizeof(struct slcd_test_s));
priv->stream.put = slcd_putc;
#ifdef CONFIG_STDIO_LINEBUFFER
priv->stream.flush = lib_noflush;
#endif
/* Open the SLCD device */
printf("Opening %s for read/write access\n", EXAMPLES_SLCD_DEVNAME);
priv->fd = open(EXAMPLES_SLCD_DEVNAME, O_RDWR);
if (priv->fd < 0)
{
printf("Failed to open %s: %d\n", EXAMPLES_SLCD_DEVNAME, errno);
goto errout;
}
/* Get the geometry of the SCLD device */
ret = ioctl(priv->fd, SLCDIOC_GEOMETRY, (unsigned long)&priv->geo);
if (ret < 0)
{
printf("ioctl(SLCDIOC_GEOMETRY) failed: %d\n", errno);
goto errout_with_fd;
}
printf("Geometry rows: %d columns: %d nbars: %d\n",
priv->geo.nrows, priv->geo.ncolumns, priv->geo.nbars);
/* Home the cursor and clear the display */
printf("Clear screen\n");
slcd_encode(SLCDCODE_CLEAR, 0, &priv->stream);
/* Say hello */
printf("Print [%s]\n", str);
slcd_puts(&priv->stream, str);
slcd_flush(&priv->stream);
/* Normal exit */
printf("Test complete\n");
close(priv->fd);
return 0;
errout_with_fd:
close(priv->fd);
errout:
exit(EXIT_FAILURE);
}
Reference in New Issue View Git Blame Copy Permalink