sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
f9cec1c770
nuttx-apps/examples/foc/foc_motor_f32.c

544 lines
13 KiB
C
Raw Blame History

/****************************************************************************
* apps/examples/foc/foc_motor_f32.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include "foc_motor_f32.h"
#include "foc_cfg.h"
#include "foc_adc.h"
#include "foc_debug.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Type Definition
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: foc_motor_configure
****************************************************************************/
static int foc_motor_configure(FAR struct foc_motor_f32_s *motor)
{
#ifdef CONFIG_INDUSTRY_FOC_CONTROL_PI
struct foc_initdata_f32_s ctrl_cfg;
#endif
#ifdef CONFIG_INDUSTRY_FOC_MODULATION_SVM3
struct foc_mod_cfg_f32_s mod_cfg;
#endif
#ifdef CONFIG_EXAMPLES_FOC_STATE_USE_MODEL_PMSM
struct foc_model_pmsm_cfg_f32_s pmsm_cfg;
#endif
int ret = OK;
DEBUGASSERT(motor);
/* Initialize velocity ramp */
ret = foc_ramp_init_f32(&motor->ramp,
motor->per,
RAMP_CFG_THR,
RAMP_CFG_ACC,
RAMP_CFG_ACC);
if (ret < 0)
{
PRINTF("ERROR: foc_ramp_init failed %d\n", ret);
goto errout;
}
/* Initialize FOC handler */
ret = foc_handler_init_f32(&motor->handler,
&g_foc_control_pi_f32,
&g_foc_mod_svm3_f32);
if (ret < 0)
{
PRINTF("ERROR: foc_handler_init failed %d\n", ret);
goto errout;
}
#ifdef CONFIG_INDUSTRY_FOC_CONTROL_PI
/* Get PI controller configuration */
ctrl_cfg.id_kp = (motor->envp->pi_kp / 1000.0f);
ctrl_cfg.id_ki = (motor->envp->pi_ki / 1000.0f);
ctrl_cfg.iq_kp = (motor->envp->pi_kp / 1000.0f);
ctrl_cfg.iq_ki = (motor->envp->pi_ki / 1000.0f);
#endif
#ifdef CONFIG_INDUSTRY_FOC_MODULATION_SVM3
/* Get SVM3 modulation configuration */
mod_cfg.pwm_duty_max = motor->pwm_duty_max;
#endif
/* Configure FOC handler */
foc_handler_cfg_f32(&motor->handler, &ctrl_cfg, &mod_cfg);
#ifdef CONFIG_EXAMPLES_FOC_STATE_USE_MODEL_PMSM
/* Initialize PMSM model */
ret = foc_model_init_f32(&motor->model,
&g_foc_model_pmsm_ops_f32);
if (ret < 0)
{
PRINTF("ERROR: foc_model_init failed %d\n", ret);
goto errout;
}
/* Get PMSM model configuration */
pmsm_cfg.poles = FOC_MODEL_POLES;
pmsm_cfg.res = FOC_MODEL_RES;
pmsm_cfg.ind = FOC_MODEL_IND;
pmsm_cfg.iner = FOC_MODEL_INER;
pmsm_cfg.flux_link = FOC_MODEL_FLUX;
pmsm_cfg.ind_d = FOC_MODEL_INDD;
pmsm_cfg.ind_q = FOC_MODEL_INDQ;
pmsm_cfg.per = motor->per;
pmsm_cfg.iphase_adc = motor->iphase_adc;
/* Configure PMSM model */
foc_model_cfg_f32(&motor->model, &pmsm_cfg);
#endif
errout:
return ret;
}
/****************************************************************************
* Name: foc_motor_vbus
****************************************************************************/
static int foc_motor_vbus(FAR struct foc_motor_f32_s *motor, uint32_t vbus)
{
DEBUGASSERT(motor);
/* Update motor VBUS */
motor->vbus = (vbus * VBUS_ADC_SCALE);
return OK;
}
/****************************************************************************
* Name: foc_motor_vel
****************************************************************************/
static int foc_motor_vel(FAR struct foc_motor_f32_s *motor, uint32_t vel)
{
DEBUGASSERT(motor);
/* Update motor velocity destination */
motor->vel_des = (vel * SETPOINT_ADC_SCALE *
motor->envp->velmax / 1000.0f);
return OK;
}
/****************************************************************************
* Name: foc_motor_state
****************************************************************************/
static int foc_motor_state(FAR struct foc_motor_f32_s *motor, int state)
{
int ret = OK;
DEBUGASSERT(motor);
/* Get open-loop currents
* NOTE: Id always set to 0
*/
motor->dq_ref.q = (motor->envp->qparam / 1000.0f);
motor->dq_ref.d = 0.0f;
/* Update motor state */
switch (state)
{
case FOC_EXAMPLE_STATE_FREE:
{
motor->vel_set = 0.0f;
motor->dir = DIR_NONE;
/* Force DQ vector to zero */
motor->dq_ref.q = 0.0f;
motor->dq_ref.d = 0.0f;
break;
}
case FOC_EXAMPLE_STATE_STOP:
{
motor->vel_set = 0.0f;
motor->dir = DIR_NONE;
/* DQ vector not zero - active brake */
break;
}
case FOC_EXAMPLE_STATE_CW:
{
motor->vel_set = 0.0f;
motor->dir = DIR_CW;
break;
}
case FOC_EXAMPLE_STATE_CCW:
{
motor->vel_set = 0.0f;
motor->dir = DIR_CCW;
break;
}
default:
{
ret = -EINVAL;
goto errout;
}
}
errout:
return ret;
}
/****************************************************************************
* Name: foc_motor_start
****************************************************************************/
static int foc_motor_start(FAR struct foc_motor_f32_s *motor, bool start)
{
int ret = OK;
DEBUGASSERT(motor);
if (start == true)
{
/* Start motor if VBUS data present */
if (motor->mq.vbus > 0)
{
/* Configure motor controller */
PRINTF("Configure motor %d!\n", motor->envp->id);
ret = foc_motor_configure(motor);
if (ret < 0)
{
PRINTF("ERROR: foc_motor_configure failed %d!\n", ret);
goto errout;
}
/* Start/stop FOC dev request */
motor->startstop = true;
}
else
{
/* Return error if no VBUS data */
PRINTF("ERROR: start request without VBUS!\n");
goto errout;
}
}
else
{
/* Start/stop FOC dev request */
motor->startstop = true;
}
errout:
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: foc_motor_init
****************************************************************************/
int foc_motor_init(FAR struct foc_motor_f32_s *motor,
FAR struct foc_ctrl_env_s *envp)
{
#ifdef CONFIG_EXAMPLES_FOC_HAVE_OPENLOOP
struct foc_openloop_cfg_f32_s ol_cfg;
#endif
int ret = OK;
DEBUGASSERT(motor);
DEBUGASSERT(envp);
/* Reset data */
memset(motor, 0, sizeof(struct foc_motor_f32_s));
/* Connect envp with motor handler */
motor->envp = envp;
/* Initialize motor data */
motor->per = (float)(1.0f / CONFIG_EXAMPLES_FOC_NOTIFIER_FREQ);
motor->iphase_adc = ((CONFIG_EXAMPLES_FOC_IPHASE_ADC) / 100000.0f);
#ifdef CONFIG_EXAMPLES_FOC_HAVE_OPENLOOP
/* Initialize open-loop angle handler */
foc_angle_init_f32(&motor->openloop,
&g_foc_angle_ol_f32);
/* Configure open-loop angle handler */
ol_cfg.per = motor->per;
foc_angle_cfg_f32(&motor->openloop, &ol_cfg);
#endif
return ret;
}
/****************************************************************************
* Name: foc_motor_deinit
****************************************************************************/
int foc_motor_deinit(FAR struct foc_motor_f32_s *motor)
{
int ret = OK;
DEBUGASSERT(motor);
#ifdef CONFIG_EXAMPLES_FOC_STATE_USE_MODEL_PMSM
/* Deinitialize PMSM model */
ret = foc_model_deinit_f32(&motor->model);
if (ret < 0)
{
PRINTF("ERROR: foc_model_deinit failed %d\n", ret);
goto errout;
}
#endif
/* Deinitialize FOC handler */
ret = foc_handler_deinit_f32(&motor->handler);
if (ret < 0)
{
PRINTF("ERROR: foc_handler_deinit failed %d\n", ret);
goto errout;
}
/* Reset data */
memset(motor, 0, sizeof(struct foc_motor_f32_s));
errout:
return ret;
}
/****************************************************************************
* Name: foc_motor_get
****************************************************************************/
int foc_motor_get(FAR struct foc_motor_f32_s *motor)
{
struct foc_angle_in_f32_s ain;
struct foc_angle_out_f32_s aout;
int ret = OK;
DEBUGASSERT(motor);
/* Update open-loop angle handler */
ain.vel = motor->vel_set;
ain.angle = motor->angle_now;
ain.dir = motor->dir;
#ifdef CONFIG_EXAMPLES_FOC_HAVE_OPENLOOP
foc_angle_run_f32(&motor->openloop, &ain, &aout);
/* Store open-loop angle */
motor->angle_ol = aout.angle;
/* Get phase angle now */
if (motor->openloop_now == true)
{
motor->angle_now = motor->angle_ol;
}
else
#endif
{
/* TODO: get phase angle from observer or sensor */
ASSERT(0);
}
return ret;
}
/****************************************************************************
* Name: foc_motor_control
****************************************************************************/
int foc_motor_control(FAR struct foc_motor_f32_s *motor)
{
int ret = OK;
DEBUGASSERT(motor);
/* No velocity feedback - assume that velocity now is velocity set
* TODO: velocity observer or sensor
*/
motor->vel_now = motor->vel_set;
/* Run velocity ramp controller */
ret = foc_ramp_run_f32(&motor->ramp, motor->vel_des,
motor->vel_now, &motor->vel_set);
if (ret < 0)
{
PRINTF("ERROR: foc_ramp_run failed %d\n", ret);
goto errout;
}
errout:
return ret;
}
/****************************************************************************
* Name: foc_motor_handle
****************************************************************************/
int foc_motor_handle(FAR struct foc_motor_f32_s *motor,
FAR struct foc_mq_s *handle)
{
int ret = OK;
DEBUGASSERT(motor);
DEBUGASSERT(handle);
/* Terminate */
if (handle->quit == true)
{
motor->mq.quit = true;
}
/* Update motor VBUS */
if (motor->mq.vbus != handle->vbus)
{
PRINTFV("Set vbus=%" PRIu32 " for FOC driver %d!\n",
handle->vbus, motor->envp->id);
ret = foc_motor_vbus(motor, handle->vbus);
if (ret < 0)
{
PRINTF("ERROR: foc_motor_vbus failed %d!\n", ret);
goto errout;
}
motor->mq.vbus = handle->vbus;
}
/* Update motor velocity destination
* NOTE: only velocity control supported for now
*/
if (motor->mq.setpoint != handle->setpoint)
{
PRINTFV("Set setpoint=%" PRIu32 " for FOC driver %d!\n",
handle->setpoint, motor->envp->id);
ret = foc_motor_vel(motor, handle->setpoint);
if (ret < 0)
{
PRINTF("ERROR: foc_motor_vel failed %d!\n", ret);
goto errout;
}
motor->mq.setpoint = handle->setpoint;
}
/* Update motor state */
if (motor->mq.app_state != handle->app_state)
{
PRINTFV("Set app_state=%d for FOC driver %d!\n",
handle->app_state, motor->envp->id);
ret = foc_motor_state(motor, handle->app_state);
if (ret < 0)
{
PRINTF("ERROR: foc_motor_state failed %d!\n", ret);
goto errout;
}
motor->mq.app_state = handle->app_state;
}
/* Start/stop controller */
if (motor->mq.start != handle->start)
{
PRINTFV("Set start=%d for FOC driver %d!\n",
handle->start, motor->envp->id);
/* Start/stop motor controller */
ret = foc_motor_start(motor, handle->start);
if (ret < 0)
{
PRINTF("ERROR: foc_motor_start failed %d!\n", ret);
goto errout;
}
motor->mq.start = handle->start;
}
errout:
return ret;
}
Reference in New Issue View Git Blame Copy Permalink