nuttx/tools/KernelLibs.mk

139 lines
3.9 KiB
Makefile
Raw Permalink Normal View History

############################################################################
# tools/KernelLibs.mk
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
# NUTTXLIBS is the list of NuttX libraries that is passed to the
# processor-specific Makefile to build the final NuttX target.
# USERLIBS is the list of libraries used to build the final user-space
# application
# EXPORTLIBS is the list of libraries that should be exported by
# 'make export' is
NUTTXLIBS = staging$(DELIM)libsched$(LIBEXT)
USERLIBS =
# Driver support.
NUTTXLIBS += staging$(DELIM)libdrivers$(LIBEXT)
# External code support
ifeq ($(EXTERNALDIR),external)
NUTTXLIBS += staging$(DELIM)libexternal$(LIBEXT)
endif
# Add libraries for board support
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
NUTTXLIBS += staging$(DELIM)libboards$(LIBEXT)
# Add libraries for syscall support. The C library will be needed by
# both the kernel- and user-space builds.
NUTTXLIBS += staging$(DELIM)libstubs$(LIBEXT) staging$(DELIM)libkc$(LIBEXT)
NUTTXLIBS += staging$(DELIM)libkmm$(LIBEXT) staging$(DELIM)libkarch$(LIBEXT)
USERLIBS += staging$(DELIM)libproxies$(LIBEXT) staging$(DELIM)libc$(LIBEXT)
USERLIBS += staging$(DELIM)libmm$(LIBEXT) staging$(DELIM)libarch$(LIBEXT)
# Add libraries for math support.
ifeq ($(CONFIG_LIBM_TOOLCHAIN)$(CONFIG_LIBM_NONE),)
NUTTXLIBS += staging$(DELIM)libkm$(LIBEXT)
USERLIBS += staging$(DELIM)libm$(LIBEXT)
endif
# Add library for system call instrumentation if needed
ifeq ($(CONFIG_SCHED_INSTRUMENTATION_SYSCALL),y)
NUTTXLIBS += staging$(DELIM)libwraps$(LIBEXT)
endif
# Add libraries for C++ support. CXX, CXXFLAGS, and COMPILEXX must
# be defined in Make.defs for this to work!
ifeq ($(CONFIG_HAVE_CXX),y)
USERLIBS += staging$(DELIM)libxx$(LIBEXT)
endif
# Add libraries for network support
ifeq ($(CONFIG_NET),y)
NUTTXLIBS += staging$(DELIM)libnet$(LIBEXT)
endif
# Add libraries for Crypto API support
ifeq ($(CONFIG_CRYPTO),y)
NUTTXLIBS += staging$(DELIM)libcrypto$(LIBEXT)
endif
# Add libraries for file system support
NUTTXLIBS += staging$(DELIM)libfs$(LIBEXT) staging$(DELIM)libbinfmt$(LIBEXT)
# Add libraries for the NX graphics sub-system
ifeq ($(CONFIG_NX),y)
NUTTXLIBS += staging$(DELIM)libgraphics$(LIBEXT)
NUTTXLIBS += staging$(DELIM)libknx$(LIBEXT)
USERLIBS += staging$(DELIM)libnx$(LIBEXT)
else ifeq ($(CONFIG_NXFONTS),y)
NUTTXLIBS += staging$(DELIM)libknx$(LIBEXT)
USERLIBS += staging$(DELIM)libnx$(LIBEXT)
endif
# Add libraries for the Audio sub-system
ifeq ($(CONFIG_AUDIO),y)
NUTTXLIBS += staging$(DELIM)libaudio$(LIBEXT)
endif
# Add libraries for the Video sub-system
ifeq ($(CONFIG_VIDEO),y)
NUTTXLIBS += staging$(DELIM)libvideo$(LIBEXT)
endif
2016-02-27 00:07:04 +01:00
# Add libraries for the Wireless sub-system
ifeq ($(CONFIG_WIRELESS),y)
NUTTXLIBS += staging$(DELIM)libwireless$(LIBEXT)
2016-02-27 00:07:04 +01:00
endif
# Add DSP library
ifeq ($(CONFIG_LIBDSP),y)
NUTTXLIBS += staging$(DELIM)libdsp$(LIBEXT)
endif
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
ifeq ($(CONFIG_OPENAMP),y)
NUTTXLIBS += staging$(DELIM)libopenamp$(LIBEXT)
endif
# Add libraries for board common support
ifeq ($(CONFIG_ARCH_BOARD_COMMON),y)
NUTTXLIBS += staging$(DELIM)libboard$(LIBEXT)
endif
# Export only the user libraries
EXPORTLIBS = $(USERLIBS)