2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
|
|
|
|
* boards/arm/stm32/olimex-stm32-p407/include/board.h
|
2016-12-21 00:49:46 +01:00
|
|
|
*
|
2017-01-28 17:17:10 +01:00
|
|
|
* Copyright (C) 2016-2017 Gregory Nutt. All rights reserved.
|
2016-12-21 00:49:46 +01:00
|
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
*
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
|
* distribution.
|
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2016-12-21 00:49:46 +01:00
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
#ifndef __BOARDS_ARM_STM32_OLIMEX_STM32_P407_INCLUDE_BOARD_H
|
2020-01-31 19:07:39 +01:00
|
|
|
#define __BOARDS_ARM_STM32_OLIMEX_STM32_P407_INCLUDE_BOARD_H
|
2016-12-21 00:49:46 +01:00
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
2016-12-21 00:49:46 +01:00
|
|
|
* Included Files
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2016-12-21 00:49:46 +01:00
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
# include <stdint.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
2016-12-21 00:49:46 +01:00
|
|
|
* Pre-processor Definitions
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2016-12-21 00:49:46 +01:00
|
|
|
|
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
|
|
|
|
|
|
/* HSI - 16 MHz RC factory-trimmed
|
|
|
|
|
* LSI - 32 KHz RC (30-60KHz, uncalibrated)
|
|
|
|
|
* HSE - On-board crystal frequency is 25MHz
|
|
|
|
|
* LSE - 32.768 kHz
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define STM32_BOARD_XTAL 25000000ul
|
|
|
|
|
|
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul
|
|
|
|
|
#define STM32_LSI_FREQUENCY 32000
|
|
|
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
|
|
|
#define STM32_LSE_FREQUENCY 32768
|
|
|
|
|
|
|
|
|
|
/* Main PLL Configuration.
|
|
|
|
|
*
|
|
|
|
|
* PLL source is HSE
|
|
|
|
|
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
2016-12-21 17:45:36 +01:00
|
|
|
* = (25,000,000 / 25) * 336
|
|
|
|
|
* = 336,000,000
|
2016-12-21 00:49:46 +01:00
|
|
|
* SYSCLK = PLL_VCO / PLLP
|
2016-12-21 17:45:36 +01:00
|
|
|
* = 336,000,000 / 2 = 168,000,000
|
2016-12-21 00:49:46 +01:00
|
|
|
* USB OTG FS, SDIO and RNG Clock
|
|
|
|
|
* = PLL_VCO / PLLQ
|
|
|
|
|
* = 48,000,000
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
|
2016-12-21 17:45:36 +01:00
|
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
2016-12-21 00:49:46 +01:00
|
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
2016-12-21 17:45:36 +01:00
|
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
2016-12-21 00:49:46 +01:00
|
|
|
|
2016-12-21 17:45:36 +01:00
|
|
|
#define STM32_SYSCLK_FREQUENCY 168000000ul
|
2016-12-21 00:49:46 +01:00
|
|
|
|
2016-12-21 17:45:36 +01:00
|
|
|
/* AHB clock (HCLK) is SYSCLK (168MHz) */
|
2016-12-21 00:49:46 +01:00
|
|
|
|
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
|
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
|
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
|
|
|
|
|
2016-12-21 17:45:36 +01:00
|
|
|
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
|
2016-12-21 00:49:46 +01:00
|
|
|
|
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
|
|
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
|
|
|
|
|
2016-12-21 17:45:36 +01:00
|
|
|
/* Timers driven from APB1 will be twice PCLK1 */
|
2016-12-21 00:49:46 +01:00
|
|
|
|
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
|
2016-12-21 17:45:36 +01:00
|
|
|
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
|
2016-12-21 00:49:46 +01:00
|
|
|
|
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
|
|
|
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
|
|
2016-12-21 17:45:36 +01:00
|
|
|
/* Timers driven from APB2 will be twice PCLK2 */
|
2016-12-21 00:49:46 +01:00
|
|
|
|
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
|
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
|
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
|
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
|
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
|
|
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
|
|
|
* otherwise frequency is 2xAPBx.
|
|
|
|
|
* Note: TIM1,8 are on APB2, others on APB1
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
#define BOARD_TIM2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
#define BOARD_TIM3_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
#define BOARD_TIM4_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
#define BOARD_TIM5_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
#define BOARD_TIM6_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
#define BOARD_TIM7_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
|
|
2016-12-21 17:45:36 +01:00
|
|
|
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
|
|
|
|
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
|
|
|
|
* to service FIFOs in interrupt driven mode. These values have not been
|
|
|
|
|
* tuned!!!
|
|
|
|
|
*
|
|
|
|
|
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
|
|
|
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
|
|
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
|
|
|
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
|
#else
|
|
|
|
|
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
|
|
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
|
|
|
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
|
#else
|
|
|
|
|
# define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
|
#endif
|
|
|
|
|
|
2016-12-21 00:49:46 +01:00
|
|
|
/* LED definitions ******************************************************************/
|
|
|
|
|
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
|
|
|
|
|
* way. The following definitions are used to access individual LEDs.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
|
|
|
|
|
|
#define BOARD_LED1 0
|
|
|
|
|
#define BOARD_LED2 1
|
|
|
|
|
#define BOARD_LED3 2
|
|
|
|
|
#define BOARD_LED4 3
|
|
|
|
|
#define BOARD_NLEDS 4
|
|
|
|
|
|
|
|
|
|
#define BOARD_LED_GREEN1 BOARD_LED1
|
|
|
|
|
#define BOARD_LED_YELLOW BOARD_LED2
|
|
|
|
|
#define BOARD_LED_RED BOARD_LED3
|
|
|
|
|
#define BOARD_LED_GREEN2 BOARD_LED4
|
|
|
|
|
|
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
|
|
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
|
|
|
#define BOARD_LED3_BIT (1 << BOARD_LED3)
|
|
|
|
|
#define BOARD_LED4_BIT (1 << BOARD_LED4)
|
|
|
|
|
|
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 4 LEDs on board the
|
|
|
|
|
* Olimex STM32-P407. The following definitions describe how NuttX controls the LEDs:
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define LED_STARTED 0 /* LED1 */
|
|
|
|
|
#define LED_HEAPALLOCATE 1 /* LED2 */
|
|
|
|
|
#define LED_IRQSENABLED 2 /* LED1 + LED2 */
|
|
|
|
|
#define LED_STACKCREATED 3 /* LED3 */
|
|
|
|
|
#define LED_INIRQ 4 /* LED1 + LED3 */
|
|
|
|
|
#define LED_SIGNAL 5 /* LED2 + LED3 */
|
|
|
|
|
#define LED_ASSERTION 6 /* LED1 + LED2 + LED3 */
|
|
|
|
|
#define LED_PANIC 7 /* N/C + N/C + N/C + LED4 */
|
|
|
|
|
|
|
|
|
|
/* Button definitions ***************************************************************/
|
|
|
|
|
/* The Olimex STM32-P407 supports seven buttons: */
|
|
|
|
|
|
|
|
|
|
#define BUTTON_TAMPER 0
|
|
|
|
|
#define BUTTON_WKUP 1
|
|
|
|
|
#define BUTTON_RIGHT 2
|
|
|
|
|
#define BUTTON_UP 3
|
|
|
|
|
#define BUTTON_LEFT 4
|
|
|
|
|
#define BUTTON_DOWN 5
|
|
|
|
|
#define BUTTON_CENTER 6
|
|
|
|
|
|
|
|
|
|
#define NUM_BUTTONS 7
|
|
|
|
|
|
|
|
|
|
#define BUTTON_TAMPER_BIT (1 << BUTTON_TAMPER)
|
|
|
|
|
#define BUTTON_WKUP_BIT (1 << BUTTON_WKUP)
|
|
|
|
|
#define BUTTON_RIGHT_BIT (1 << BUTTON_RIGHT)
|
|
|
|
|
#define BUTTON_UP_BIT (1 << BUTTON_UP)
|
|
|
|
|
#define BUTTON_LEFT_BIT (1 << BUTTON_LEFT)
|
|
|
|
|
#define BUTTON_DOWN_BIT (1 << BUTTON_DOWN)
|
|
|
|
|
#define BUTTON_CENTER_BIT (1 << BUTTON_CENTER)
|
|
|
|
|
|
|
|
|
|
/* Alternate function pin selections ************************************************/
|
|
|
|
|
|
2016-12-21 18:38:45 +01:00
|
|
|
/* USART3: */
|
|
|
|
|
|
|
|
|
|
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
|
|
|
|
|
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
|
|
|
|
|
#define GPIO_USART3_CTS GPIO_USART3_CTS_2 /* PD11 */
|
|
|
|
|
#define GPIO_USART3_RTS GPIO_USART3_RTS_2 /* PD12 */
|
|
|
|
|
|
2017-02-23 20:27:36 +01:00
|
|
|
/* USART6: */
|
|
|
|
|
|
|
|
|
|
#define GPIO_USART6_RX GPIO_USART6_RX_2 /* PG9 */
|
|
|
|
|
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
|
|
|
|
|
|
2016-12-21 18:38:45 +01:00
|
|
|
/* CAN: */
|
|
|
|
|
|
|
|
|
|
#define GPIO_CAN1_RX GPIO_CAN1_RX_2 /* PB8 */
|
|
|
|
|
#define GPIO_CAN1_TX GPIO_CAN1_TX_2 /* PB9 */
|
|
|
|
|
|
2017-01-28 17:17:10 +01:00
|
|
|
/* microSD Connector:
|
|
|
|
|
*
|
|
|
|
|
* ----------------- ----------------- ------------------------
|
|
|
|
|
* SD/MMC CONNECTOR BOARD GPIO CONFIGURATION(s
|
|
|
|
|
* PIN SIGNAL SIGNAL (no remapping)
|
|
|
|
|
* --- ------------- ----------------- -------------------------
|
|
|
|
|
* 1 DAT2/RES SD_D2/USART3_TX/ PC10 GPIO_SDIO_D2
|
|
|
|
|
* SPI3_SCK
|
|
|
|
|
* 2 CD/DAT3/CS SD_D3/USART3_RX/ PC11 GPIO_SDIO_D3
|
|
|
|
|
* SPI3_MISO
|
|
|
|
|
* 3 CMD/DI SD_CMD PD2 GPIO_SDIO_CMD
|
|
|
|
|
* 4 VDD N/A N/A
|
|
|
|
|
* 5 CLK/SCLK SD_CLK/SPI3_MOSI PC12 GPIO_SDIO_CK
|
|
|
|
|
* 6 VSS N/A N/A
|
|
|
|
|
* 7 DAT0/D0 SD_D0/DCMI_D2 PC8 GPIO_SDIO_D0
|
|
|
|
|
* 8 DAT1/RES SD_D1/DCMI_D3 PC9 GPIO_SDIO_D1
|
|
|
|
|
* --- ------------- ----------------- -------------------------
|
|
|
|
|
*
|
|
|
|
|
* NOTES:
|
|
|
|
|
* 1. DAT4, DAT4, DAT6, and DAT7 not connected.
|
|
|
|
|
* 2. There are no alternative pin selections.
|
|
|
|
|
* 3. There is no card detect (CD) GPIO input so we will not
|
|
|
|
|
* sense if there is a card in the SD slot or not. This will
|
|
|
|
|
* make usage very awkward.
|
|
|
|
|
*/
|
|
|
|
|
|
2016-12-21 18:38:45 +01:00
|
|
|
/* Ethernet:
|
|
|
|
|
*
|
2016-12-21 00:49:46 +01:00
|
|
|
* - PA2 is ETH_MDIO
|
|
|
|
|
* - PC1 is ETH_MDC
|
|
|
|
|
* - PB5 is ETH_PPS_OUT - NC (not connected)
|
|
|
|
|
* - PA0 is ETH_MII_CRS - NC
|
|
|
|
|
* - PA3 is ETH_MII_COL - NC
|
|
|
|
|
* - PB10 is ETH_MII_RX_ER - NC
|
|
|
|
|
* - PB0 is ETH_MII_RXD2 - NC
|
|
|
|
|
* - PH7 is ETH_MII_RXD3 - NC
|
|
|
|
|
* - PC3 is ETH_MII_TX_CLK - NC
|
|
|
|
|
* - PC2 is ETH_MII_TXD2 - NC
|
|
|
|
|
* - PB8 is ETH_MII_TXD3 - NC
|
|
|
|
|
* - PA1 is ETH_MII_RX_CLK/ETH_RMII_REF_CLK
|
|
|
|
|
* - PA7 is ETH_MII_RX_DV/ETH_RMII_CRS_DV
|
|
|
|
|
* - PC4 is ETH_MII_RXD0/ETH_RMII_RXD0
|
|
|
|
|
* - PC5 is ETH_MII_RXD1/ETH_RMII_RXD1
|
|
|
|
|
* - PB11 is ETH_MII_TX_EN/ETH_RMII_TX_EN
|
|
|
|
|
* - PG13 is ETH_MII_TXD0/ETH_RMII_TXD0
|
|
|
|
|
* - PG14 is ETH_MII_TXD1/ETH_RMII_TXD1
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_ETH_PPS_OUT GPIO_ETH_PPS_OUT_1
|
|
|
|
|
#define GPIO_ETH_MII_CRS GPIO_ETH_MII_CRS_1
|
|
|
|
|
#define GPIO_ETH_MII_COL GPIO_ETH_MII_COL_1
|
|
|
|
|
#define GPIO_ETH_MII_RX_ER GPIO_ETH_MII_RX_ER_1
|
|
|
|
|
#define GPIO_ETH_MII_RXD2 GPIO_ETH_MII_RXD2_1
|
|
|
|
|
#define GPIO_ETH_MII_RXD3 GPIO_ETH_MII_RXD3_1
|
|
|
|
|
#define GPIO_ETH_MII_TXD3 GPIO_ETH_MII_TXD3_1
|
|
|
|
|
#define GPIO_ETH_MII_TX_EN GPIO_ETH_MII_TX_EN_2
|
|
|
|
|
#define GPIO_ETH_MII_TXD0 GPIO_ETH_MII_TXD0_2
|
|
|
|
|
#define GPIO_ETH_MII_TXD1 GPIO_ETH_MII_TXD1_2
|
|
|
|
|
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_1
|
|
|
|
|
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2
|
|
|
|
|
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2
|
|
|
|
|
|
2017-01-28 17:17:10 +01:00
|
|
|
/* DMA Channel/Stream Selections ****************************************************/
|
|
|
|
|
/* Stream selections are arbitrary for now but might become important in the future
|
|
|
|
|
* if we set aside more DMA channels/streams.
|
|
|
|
|
*
|
|
|
|
|
* SDIO DMA
|
2018-05-27 02:03:37 +02:00
|
|
|
* DMAMAP_SDIO_1 = Channel 4, Stream 3
|
|
|
|
|
* DMAMAP_SDIO_2 = Channel 4, Stream 6
|
2017-01-28 17:17:10 +01:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define DMAMAP_SDIO DMAMAP_SDIO_1
|
|
|
|
|
|
2018-05-27 02:03:37 +02:00
|
|
|
/* USART6
|
|
|
|
|
*
|
|
|
|
|
* DMAMAP_USART6_RX_1 = Channel 5, Stream1
|
|
|
|
|
* DMAMAP_USART6_RX_2 = Channel 5, Stream2
|
|
|
|
|
* DMAMAP_USART6_TX_1 = Channel 5, Stream6
|
|
|
|
|
* DMAMAP_USART6_TX_2 = Channel 5, Stream7
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_1
|
|
|
|
|
#define DMAMAP_USART6_TX DMAMAP_USART6_TX_1
|
|
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
#endif /* __BOARDS_ARM_STM32_OLIMEX_STM32_P407_INCLUDE_BOARD_H */
|
