sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
07c48eb7d0
nuttx/drivers/net/CMakeLists.txt

100 lines
2.3 KiB
CMake
Raw Normal View History

build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
# ##############################################################################
# drivers/net/CMakeLists.txt
#
# Licensed to the Apache Software Foundation (ASF) under one or more contributor
# license agreements. See the NOTICE file distributed with this work for
# additional information regarding copyright ownership. The ASF licenses this
# file to you under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
#
# ##############################################################################
if(CONFIG_NET)
set(SRCS)
# Include network interface drivers
if(CONFIG_MM_IOB)
list(APPEND SRCS netdev_upperhalf.c)
endif()
if(CONFIG_NET_LOOPBACK)
list(APPEND SRCS loopback.c)
endif()
if(CONFIG_NET_RPMSG_DRV)
list(APPEND SRCS rpmsgdrv.c)
endif()
if(CONFIG_NETDEV_TELNET)
list(APPEND SRCS telnet.c)
endif()
if(CONFIG_NET_DM90x0)
list(APPEND SRCS dm90x0.c)
endif()
if(CONFIG_ENC28J60)
list(APPEND SRCS enc28j60.c)
endif()
if(CONFIG_ENCX24J600)
list(APPEND SRCS encx24j600.c)
endif()
if(CONFIG_NET_SLIP)
list(APPEND SRCS slip.c)
endif()
if(CONFIG_NET_TUN)
list(APPEND SRCS tun.c)
endif()
if(CONFIG_NET_FTMAC100)
list(APPEND SRCS ftmac100.c)
endif()
if(CONFIG_NET_LAN91C111)
list(APPEND SRCS lan91c111.c)
endif()
if(CONFIG_NET_SKELETON)
list(APPEND SRCS skeleton.c)
endif()
if(CONFIG_NET_W5500)
list(APPEND SRCS w5500.c)
endif()
driver/net/lan9250: Add LAN9250 driver(SPI and QSPI mode)
2023-10-26 10:42:51 +02:00
if(CONFIG_NET_LAN9250)
list(APPEND SRCS lan9250.c)
endif()
drivers/net: add Intel e1000 network card support add Intel e1000 network card support Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
2024-04-02 18:23:59 +02:00
if(CONFIG_NET_E1000)
list(APPEND SRCS e1000.c)
endif()
drivers/net: add support for Intel I225 network card add support for Intel I225 network card Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
2024-09-12 12:31:22 +02:00
if(CONFIG_NET_IGC)
list(APPEND SRCS igc.c)
endif()
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
if(CONFIG_ARCH_PHY_INTERRUPT)
list(APPEND SRCS phy_notify.c)
endif()
qemu/wifi: Add the virtual wifi function on the emulator. -The qemu wifi fucntion only supports the STA mode and the following operations: wapi mode wlan0 2 wapi scan wlan0 wapi psk wlan0 password 3 wapi essid wlan0 wifi_name 1 wapi show wlan0 wapi disconnect wlan0 -Eanble the virtual wifi function with the MACRO `CONFIG_DRIVERS_WIFI_SIM`. Signed-off-by: liqinhui <liqinhui@xiaomi.com>
2023-10-23 08:06:12 +02:00
if(CONFIG_DRIVERS_WIFI_SIM)
list(APPEND SRCS wifi_sim.c)
endif()
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
target_sources(drivers PRIVATE ${SRCS})
endif()
Reference in New Issue Copy Permalink