sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
0ada35faeb
nuttx/boards/arm/stm32/nucleo-g431rb/include/board.h

291 lines
11 KiB
C
Raw Normal View History

stm32: add stm32g43x support and nucleo-g431rb board
2020-12-09 11:28:10 +01:00
/****************************************************************************
sourcefiles: Fix relative path in file header
2021-03-08 22:39:04 +01:00
* boards/arm/stm32/nucleo-g431rb/include/board.h
stm32: add stm32g43x support and nucleo-g431rb board
2020-12-09 11:28:10 +01:00
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32_NUCLEO_G431RB_INCLUDE_BOARD_H
#define __BOARDS_ARM_STM32_NUCLEO_G431RB_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
#undef STM32_BOARD_XTAL /* Not installed by default */
#define STM32_HSI_FREQUENCY 16000000ul /* 16MHz */
#define STM32_LSI_FREQUENCY 32000 /* 32kHz */
#undef STM32_HSE_FREQUENCY /* Not installed by default */
#undef STM32_LSE_FREQUENCY /* Not available on this board */
/* Main PLL Configuration.
*
* PLL source is HSI = 16MHz
* PLLN = 85, PLLM = 4, PLLP = 10, PLLQ = 2, PLLR = 2
*
* f(VCO Clock) = f(PLL Clock Input) x (PLLN / PLLM)
* f(PLL_P) = f(VCO Clock) / PLLP
* f(PLL_Q) = f(VCO Clock) / PLLQ
* f(PLL_R) = f(VCO Clock) / PLLR
*
* Where:
* 8 <= PLLN <= 127
* 1 <= PLLM <= 16
* PLLP = 2 through 31
* PLLQ = 2, 4, 6, or 8
* PLLR = 2, 4, 6, or 8
*
* Do not exceed 170MHz on f(PLL_P), f(PLL_Q), or f(PLL_R).
* 64MHz <= f(VCO Clock) <= 344MHz.
*
* Given the above:
*
* f(VCO Clock) = HSI x PLLN / PLLM
* = 16MHz x 85 / 4
* = 340MHz
*
* PLLPCLK = f(VCO Clock) / PLLP
* = 340MHz / 10
* = 34MHz
* (May be used for ADC)
*
* PLLQCLK = f(VCO Clock) / PLLQ
* = 340MHz / 2
* = 170MHz
* (May be used for QUADSPI, FDCAN, SAI1, I2S3. If set to
* 48MHz, may be used for USB, RNG.)
*
* PLLRCLK = f(VCO Clock) / PLLR
* = 340MHz / 2
* = 170MHz
* (May be used for SYSCLK and most peripherals.)
*/
#define STM32_PLLCFGR_PLLSRC RCC_PLLCFGR_PLLSRC_HSI
#define STM32_PLLCFGR_PLLCFG (RCC_PLLCFGR_PLLPEN | \
RCC_PLLCFGR_PLLQEN | \
RCC_PLLCFGR_PLLREN)
#define STM32_PLLCFGR_PLLN RCC_PLLCFGR_PLLN(85)
#define STM32_PLLCFGR_PLLM RCC_PLLCFGR_PLLM(4)
#define STM32_PLLCFGR_PLLP RCC_PLLCFGR_PLLPDIV(10)
#define STM32_PLLCFGR_PLLQ RCC_PLLCFGR_PLLQ_2
#define STM32_PLLCFGR_PLLR RCC_PLLCFGR_PLLR_2
#define STM32_VCO_FREQUENCY ((STM32_HSI_FREQUENCY / 4) * 85)
#define STM32_PLLP_FREQUENCY (STM32_VCO_FREQUENCY / 10)
#define STM32_PLLQ_FREQUENCY (STM32_VCO_FREQUENCY / 2)
#define STM32_PLLR_FREQUENCY (STM32_VCO_FREQUENCY / 2)
/* Use the PLL and set the SYSCLK source to be PLLR (170MHz) */
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
#define STM32_SYSCLK_FREQUENCY STM32_PLLR_FREQUENCY
/* AHB clock (HCLK) is SYSCLK (170MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
/* APB1 clock (PCLK1) is HCLK (170MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK
#define STM32_PCLK1_FREQUENCY STM32_HCLK_FREQUENCY
/* APB2 clock (PCLK2) is HCLK (170MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
nucleo-g431rb: add PWM example
2021-04-12 17:59:09 +02:00
/* APB2 timers 1, 8, 20 and 15-17 will receive PCLK2. */
/* Timers driven from APB2 will be PCLK2 */
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB1_TIM15_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB1_TIM16_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB1_TIM17_CLKIN (STM32_PCLK2_FREQUENCY)
/* APB1 timers 2-7 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (STM32_PCLK1_FREQUENCY)
/* USB divider -- Divide PLL clock by 1.5 */
#define STM32_CFGR_USBPRE 0
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
*/
#define BOARD_TIM1_FREQUENCY (STM32_PCLK2_FREQUENCY)
#define BOARD_TIM2_FREQUENCY (STM32_PCLK1_FREQUENCY)
#define BOARD_TIM3_FREQUENCY (STM32_PCLK1_FREQUENCY)
#define BOARD_TIM4_FREQUENCY (STM32_PCLK1_FREQUENCY)
#define BOARD_TIM5_FREQUENCY (STM32_PCLK1_FREQUENCY)
#define BOARD_TIM6_FREQUENCY (STM32_PCLK1_FREQUENCY)
#define BOARD_TIM7_FREQUENCY (STM32_PCLK1_FREQUENCY)
#define BOARD_TIM8_FREQUENCY (STM32_PCLK2_FREQUENCY)
#define BOARD_TIM15_FREQUENCY (STM32_PCLK2_FREQUENCY)
#define BOARD_TIM16_FREQUENCY (STM32_PCLK2_FREQUENCY)
#define BOARD_TIM17_FREQUENCY (STM32_PCLK2_FREQUENCY)
#define BOARD_TIM20_FREQUENCY (STM32_PCLK2_FREQUENCY)
stm32: add stm32g43x support and nucleo-g431rb board
2020-12-09 11:28:10 +01:00
/* LED definitions **********************************************************/
/* The NUCLEO-G431RB has four user LEDs.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in
* any way. The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0 /* User LD2 */
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board
* the Nucleo G431RB. The following definitions describe how NuttX controls
* the LED:
*
* SYMBOL Meaning LED1 state
* ------------------ ----------------------- ----------
* LED_STARTED NuttX has been started OFF
* LED_HEAPALLOCATE Heap has been allocated OFF
* LED_IRQSENABLED Interrupts enabled OFF
* LED_STACKCREATED Idle stack created ON
* LED_INIRQ In an interrupt No change
* LED_SIGNAL In a signal handler No change
* LED_ASSERTION An assertion failed No change
* LED_PANIC The system has crashed Blinking
* LED_IDLE STM32 is is sleep mode Not used
*/
#define LED_STARTED 0
#define LED_HEAPALLOCATE 0
#define LED_IRQSENABLED 0
#define LED_STACKCREATED 1
#define LED_INIRQ 2
#define LED_SIGNAL 2
#define LED_ASSERTION 2
#define LED_PANIC 1
/* Button definitions *******************************************************/
/* The Nucleo G431RB supports two buttons; only one button is controllable
* by software:
*
* B1 USER: user button connected to the I/O PC13 of the STM32G431RB.
* B2 RESET: push button connected to NRST is used to RESET the
* STM32G431RB.
*/
#define BUTTON_USER 0
#define NUM_BUTTONS 1
#define BUTTON_USER_BIT (1 << BUTTON_USER)
/* Alternate function pin selections ****************************************/
/* USART2 (STLINK Virtual COM Port) */
#define GPIO_USART2_TX GPIO_USART2_TX_1 /* PA2 */
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
nucleo-g431rb: add PWM example
2021-04-12 17:59:09 +02:00
/* PWM configuration ********************************************************/
/* TIM1 PWM */
#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1 /* PA8 */
#define GPIO_TIM1_CH1NOUT GPIO_TIM1_CH1NOUT_2 /* PA11 */
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_1 /* PA9 */
#define GPIO_TIM1_CH2NOUT GPIO_TIM1_CH2NOUT_1 /* PA12 */
#define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_1 /* PA10 */
#define GPIO_TIM1_CH3NOUT GPIO_TIM1_CH3NOUT_1 /* PB1 */
#define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_2 /* PC3 */
nucleo-g431rb: add ADC example
2021-04-12 18:30:21 +02:00
/* DMA channels *************************************************************/
/* ADC */
#define ADC1_DMA_CHAN DMAMAP_DMA12_ADC1_0 /* DMA1 */
nucleo-g431rb: add support for IHM16M1
2021-04-14 15:02:01 +02:00
/* USART2 */
#define DMACHAN_USART2_TX DMAMAP_DMA12_USART2TX_0 /* DMA1 */
#define DMACHAN_USART2_RX DMAMAP_DMA12_USART2RX_0 /* DMA1 */
#ifdef CONFIG_BOARD_STM32_IHM16M1
/* Configuration specific for the X-NUCLEO-IHM16M1 expansion board with
* the STSPIN830 driver.
*/
/* TIM1 configuration *******************************************************/
# define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1 /* TIM1 CH1 - PA8 - U high */
# define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_1 /* TIM1 CH2 - PA9 - V high */
# define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_1 /* TIM1 CH3 - PA10 - W high */
# define GPIO_TIM1_CH4OUT 0 /* not used as output */
/* UVW ENABLE */
# define GPIO_FOC_EN_U (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
# define GPIO_FOC_EN_V (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14)
# define GPIO_FOC_EN_W (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15)
/* EN_FAULT */
# define GPIO_FOC_ENFAULT (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN12)
/* Debug pins */
# define GPIO_FOC_DEBUG0 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
# define GPIO_FOC_DEBUG1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
# define GPIO_FOC_DEBUG2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN6)
# define GPIO_FOC_DEBUG3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz| \
GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN12)
#endif /* CONFIG_BOARD_STM32_IHM16M1 */
stm32: add stm32g43x support and nucleo-g431rb board
2020-12-09 11:28:10 +01:00
#endif /* __BOARDS_ARM_STM32_NUCLEO_G431RB_INCLUDE_BOARD_H */
Reference in New Issue Copy Permalink