nuttx/wireless/bluetooth/Make.defs

42 lines
1.4 KiB
Plaintext
Raw Normal View History

This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-29 20:35:41 +02:00
############################################################################
# wireless/bluetooth/Make.defs
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-29 20:35:41 +02:00
#
# http://www.apache.org/licenses/LICENSE-2.0
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-29 20:35:41 +02:00
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-29 20:35:41 +02:00
#
############################################################################
ifeq ($(CONFIG_WIRELESS_BLUETOOTH),y)
# Include Bluetooth support
CSRCS += bt_buf.c bt_netdev.c bt_queue.c bt_hcicore.c
ifeq ($(CONFIG_WIRELESS_BLUETOOTH_HOST),y)
# Host-layer
CSRCS += bt_atomic.c bt_att.c bt_conn.c bt_gatt.c
CSRCS += bt_ioctl.c bt_keys.c bt_l2cap.c bt_smp.c
This comment adds (1) basic support for AF_BLUETOOTH sockets. The logic compiles but is still incomplete. Support for Bluetooth is general is still dependent on CONFIG_EXPERMIMENTAL because it is not yet ready for used. Squashed commit of the following: wireless/bluetooth: Some small changes that gets to a clean compile by just eliminating some incorrect implementations (still with a lot of warnings. The logic is still incomplete but now not so lethal. wireless/bluetooth: Restructuring: Connection interfaces should internal to wireless/bluetooth. include/nuttx/wireless/bt_conn.h removed and merged with wireless/bluetooth/bt_conn.h. Several fix to get closer to bt_netdev.c compiling. Need to design some not interfaces and use some existing interfaces to send and receiv packets. wireless/bluetooth: Some organization with some network device compile errors fixed. Still not even close to compiling. net/bluetooth: Fix numerous compile issues; Still open design issues with regard to the interface with the Bluetooth stack. wireless/bluetooth: Create bt_netdev.c with a crude copy of mac802154_netdev.c. Does not not even compile yet. include/nuttx/net: Add bluetooth.h. Content is not yet correct. net/netpackets: Add bluetooth.h. Update net/bluetooth to use new socket address definition. net/bluetooth: Some fixes for initial build. net/bluetooth: Add initial support for Bluetooth sockets. The initial cut is just the a clone of the IEEE 802.15.4 socket support with name changes. net/ieee802154: Fix some typos noted when cloning to create net/bluetooth.
2018-03-31 22:55:03 +02:00
CSRCS += bt_uuid.c
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-29 20:35:41 +02:00
endif
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-29 20:35:41 +02:00
DEPPATH += --dep-path bluetooth
VPATH += :bluetooth
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)wireless$(DELIM)bluetooth
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-29 20:35:41 +02:00
endif # CONFIG_WIRELESS_BLUETOOTH