nuttx/net/ieee802154/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menu "IEEE 802.15.4 socket support"

config NET_IEEE802154
	bool "IEEE 802.15.4 socket support"
	default n
	depends on WIRELESS_IEEE802154
	select NETDEV_IOCTL
	---help---
		Enable support for raw, IEEE 802.15.4 sockets.

		Raw sockets allow receiving and transmitting IEEE 802.15.3 radio
		frames without a layer2 protocol such as 6LoWPAN in between. Frames
		received are copied into a IEEE 802.15.4 socket tap before they
		enter the network. Frames written into a IEEE 802.15.4 socket will
		bypass the network altogether and will be sent directly to the
		IEEE 802.15.4 MAC network interface driver outgoing frame queue.

if NET_IEEE802154

config NET_IEEE802154_FRAMELEN
	int "IEEE802.15.4 Frame Length"
	default 127
	range 1 999999
	---help---
		For standard IEEE 802.15.4 radios, this should always be 127 bytes.
		However, some IEEE 802.15.4 radios may non-standard frame lengths.

		This setting is currently used only for detection data transfers
		that would exceed the radio frame length.

config NET_IEEE802154_NCONNS
	int "Max IEEE 802.15.4 sockets"
	default 4

config NET_IEEE802154_NCONTAINERS
	int "Number of pre-allocated frame containers"
	default 20
	---help---
		This specifies the total number of preallocated frame containers.
		One must be allocated with each incoming frame.

endif # NET_IEEE802154
endmenu # IEEE 802.15.4 Socket Support