nuttx/drivers/wireless/ieee802154/xbee/xbee_ioctl.c

172 lines
5.3 KiB
C
Raw Normal View History

Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
/****************************************************************************
* drivers/wireless/ieee802154/xbee/xbee_ioctl.c
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
*
* http://www.apache.org/licenses/LICENSE-2.0
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <string.h>
#include <nuttx/fs/ioctl.h>
#include <xbee.h>
#include <xbee_mac.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: xbee_ioctl
*
* Description:
* Handle MAC and radio IOCTL commands directed to the MAC.
*
* Input Parameters:
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
* mac - Reference to the XBee driver state structure
* cmd - The IOCTL command
* arg - The argument for the IOCTL command
*
* Returned Value:
* OK on success; Negated errno on failure.
*
****************************************************************************/
int xbee_ioctl(XBEEHANDLE xbee, int cmd, unsigned long arg)
{
int ret = -EINVAL;
FAR union ieee802154_macarg_u *macarg =
(FAR union ieee802154_macarg_u *)((uintptr_t)arg);
DEBUGASSERT(xbee != NULL);
/* Check for IOCTLs aimed at the IEEE802.15.4 MAC layer */
if (_MAC802154IOCVALID(cmd))
{
/* Handle the MAC IOCTL command */
switch (cmd)
{
case MAC802154IOC_MLME_GET_REQUEST:
{
ret = xbee_req_get(xbee, macarg->getreq.attr,
&macarg->getreq.attrval);
}
break;
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
case MAC802154IOC_MLME_SET_REQUEST:
{
ret = xbee_req_set(xbee, macarg->setreq.attr,
&macarg->setreq.attrval);
}
break;
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
case MAC802154IOC_MLME_START_REQUEST:
{
ret = xbee_req_start(xbee, &macarg->startreq);
}
break;
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
case MAC802154IOC_MLME_ASSOC_REQUEST:
{
ret = xbee_req_associate(xbee, &macarg->assocreq);
}
break;
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
case MAC802154IOC_MLME_RESET_REQUEST:
{
ret = xbee_req_reset(xbee, macarg->resetreq.resetattr);
}
break;
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
#if 0
case MAC802154IOC_MLME_ASSOC_RESPONSE:
{
ret = xbee_resp_associate(xbee, &macarg->assocresp);
}
break;
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
case MAC802154IOC_MLME_DISASSOC_REQUEST:
{
ret = xbee_req_disassociate(xbee, &macarg->disassocreq);
}
break;
case MAC802154IOC_MLME_RXENABLE_REQUEST:
{
ret = xbee_req_rxenable(xbee, &macarg->rxenabreq);
}
break;
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
case MAC802154IOC_MLME_SCAN_REQUEST:
{
ret = xbee_req_scan(xbee, &macarg->scanreq);
}
break;
case MAC802154IOC_MLME_POLL_REQUEST:
{
ret = xbee_req_poll(xbee, &macarg->pollreq);
}
break;
#endif
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
default:
wlerr("ERROR: Unrecognized cmd: %d\n", cmd);
ret = -ENOTTY;
break;
}
}
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
return ret;
}