nuttx/configs/nr5m100-nexys4/scripts/ld.script

/****************************************************************************
 * configs/nr5m100-nexys4/scripts/ld.script
 *
 *   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
 *   Copyright (C) 2016 Ken Pettit.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *           Ken Pettit <pettitkd@gmail.com>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/*======================================================================*/
/* Linker script for nr5m100_nexys board                                */
/*======================================================================*/

/*----------------------------------------------------------------------*/
/* Setup                                                                */
/*----------------------------------------------------------------------*/

/* The OUTPUT_ARCH command specifies the machine architecture where the
   argument is one of the names used in the BFD library. More
   specifically one of the entires in bfd/cpu-mips.c */

OUTPUT_ARCH( "riscv" )

/* Define the memory regions were we put stuff */
MEMORY
{
  sram (rwx) : ORIGIN = 0x20000000, LENGTH = 384K
}

stack_size = 4096;

/* Define the beginning and ending stack */
__stack_start = ORIGIN(sram) + LENGTH(sram);
__stack_end   = __stack_start - stack_size;


/* The ENTRY command specifies the entry point (ie. first instruction to
   execute). The symbol _start is defined in crt0.S */

ENTRY( __reset )

/* The GROUP command is special since the listed archives will be
   searched repeatedly until there are no new undefined references. We
   need this since -lc depends on -lgloss and -lgloss depends on -lc. I
   thought gcc would automatically include -lgcc when needed, but
   idt32.ld includes it explicitly here and I was seeing link errors
   without it. */

/*GROUP( -lc -lgloss -lgcc ) */
GROUP( -lc )

/*----------------------------------------------------------------------*/
/* Sections                                                             */
/*----------------------------------------------------------------------*/
/* This is where we specify how the input sections map to output
   sections. The .= commands set the location counter, and the
   sections are inserted in increasing address order according to the
   location counter. The following statement will take all of the .bar
   input sections and reloate them into the .foo output section which
   starts at address 0x1000.

    . = 0.x1000;
    .foo : { *(.bar) }

   If we wrap an input specification with a KEEP command then it
   prevents it from being eliminted during "link-time garbage
   collection". I'm not sure what this is, so I just followed what was
   done in idt32.ld.

   We can also set a global external symbol to a specific address in the
   output binary with this syntax:

    _etext = .;
    PROVIDE( etext = . );

   This will set the global symbol _ftext to the current location. If we
   wrap this in a PROVIDE commad, the symbol will only be set if it is
   not defined. We do this with symbols which don't begin with an
   underscore since technically in ansi C someone might have a function
   with the same name (eg. etext).

   If we need to label the beginning of a section we need to make sure
   that the linker doesn't insert an orphan section inbetween where we
   set the symbol and the actual begining of the section. We can do that
   by assigning the location dot to itself.

    . = .
    _ftext = .;
    .text :
    { }

   */

SECTIONS
{

  /*--------------------------------------------------------------------*/
  /* Startup vectors
  /*--------------------------------------------------------------------*/
  . = 0x20000000;
  _vectors = .;

  /* vectors: Program code section */
  .vectors :
  {
    *(.text.vec)
    *(.text.vec.*)
    *(.gnu.linkonce.t.*)
  }
  _evectors = .;

  /*--------------------------------------------------------------------*/
  /* Code and read-only segment                                         */
  /*--------------------------------------------------------------------*/

  /* Begining of code and text segment */
  . = 0x20000030;
  _ftext = .;
  PROVIDE( eprol = . );

  /* text: Program code section */
  .text :
  {
    _stext = ABSOLUTE(.);
    *(.text)
    *(.text.*)
    *(.gnu.linkonce.t.*)
  }

  /* init: Code to execute before main (called by crt0.S) */
  .init :
  {
    KEEP( *(.init) )
  }

  /* fini: Code to execute after main (called by crt0.S) */
  .fini :
  {
    KEEP( *(.fini) )
  }

  /* rodata: Read-only data */
  _rodata = .;
  .rodata :
  {
    *(.rdata)
    *(.rodata)
    *(.rodata.*)
    *(.gnu.linkonce.r.*)
  }

  /* End of code and read-only segment */
  PROVIDE( etext = . );
  _etext = .;

  /*--------------------------------------------------------------------*/
  /* Global constructor/destructor segement                             */
  /*--------------------------------------------------------------------*/

  .preinit_array     :
  {
    PROVIDE_HIDDEN (__preinit_array_start = .);
    KEEP (*(.preinit_array))
    PROVIDE_HIDDEN (__preinit_array_end = .);
  }

  .init_array     :
  {
    PROVIDE_HIDDEN (__init_array_start = .);
    KEEP (*(SORT(.init_array.*)))
    KEEP (*(.init_array ))
    PROVIDE_HIDDEN (__init_array_end = .);
  }

  .fini_array     :
  {
    PROVIDE_HIDDEN (__fini_array_start = .);
    KEEP (*(SORT(.fini_array.*)))
    KEEP (*(.fini_array ))
    PROVIDE_HIDDEN (__fini_array_end = .);
  }

  /*--------------------------------------------------------------------*/
  /* Other misc gcc segments (this was in idt32.ld)                     */
  /*--------------------------------------------------------------------*/
  /* I am not quite sure about these sections but it seems they are for
     C++ exception handling. I think .jcr is for "Java Class
     Registration" but it seems to end up in C++ binaries as well. */

  .eh_frame_hdr     : { *(.eh_frame_hdr)     }
  .eh_frame         : { KEEP( *(.eh_frame) ) }
  .gcc_except_table : { *(.gcc_except_table) }
  .jcr              : { KEEP (*(.jcr))       }

  /*--------------------------------------------------------------------*/
  /* Initialized data segment                                           */
  /*--------------------------------------------------------------------*/

  /* Start of initialized data segment */
  . = ALIGN(16);
   _fdata = .;

  /* data: Writable data */
  _sdata = .;
  .data :
  {
    *(.data)
    *(.data.*)
    *(.gnu.linkonce.d.*)
  }

  /* End of initialized data segment */
  PROVIDE( edata = . );
  _edata = .;

  /* Have _gp point to middle of sdata/sbss to maximize displacement range */
  . = ALIGN(16);
  _gp = . + 0x7FF0;

  /* Writable small data segment */
  .sdata :
  {
    *(.sdata)
    *(.sdata.*)
    *(.srodata.*)
  . = ALIGN(16);
    *(.gnu.linkonce.s.*)
  }

  /*--------------------------------------------------------------------*/
  /* Uninitialized data segment                                         */
  /*--------------------------------------------------------------------*/

  /* Start of uninitialized data segment */
  . = ALIGN(8);
  _fbss = .;

  /* Writable uninitialized small data segment */
  .sbss :
  {
    *(.sbss)
    *(.sbss.*)
    *(.gnu.linkonce.sb.*)
  }

  /* bss: Uninitialized writeable data section */
  . = .;
  _bss_start = .;
  .bss :
  {
    *(.bss)
    *(.bss.*)
    *(.gnu.linkonce.b.*)
    *(COMMON)
  }
  _bss_end = .;
  _ebss = .;

  /* End of uninitialized data segment (used by syscalls.c for heap) */
  . = ALIGN(16);
  PROVIDE( end = . );
  _end = ALIGN(16);

	/* Stabs debugging sections. */
	.stab 0 : { *(.stab) }
	.stabstr 0 : { *(.stabstr) }
	.stab.excl 0 : { *(.stab.excl) }
	.stab.exclstr 0 : { *(.stab.exclstr) }
	.stab.index 0 : { *(.stab.index) }
	.stab.indexstr 0 : { *(.stab.indexstr) }
	.comment 0 : { *(.comment) }
	.debug_abbrev 0 : { *(.debug_abbrev) }
	.debug_info 0 : { *(.debug_info) }
	.debug_line 0 : { *(.debug_line) }
	.debug_pubnames 0 : { *(.debug_pubnames) }
	.debug_aranges 0 : { *(.debug_aranges) }
}