2015-05-22 22:12:30 +02:00
|
|
|
/************************************************************************************
|
2015-05-22 22:36:01 +02:00
|
|
|
* configs/lpcxpresso-lpc1115/src/lpcxpresso_lpc1115.h
|
2015-05-22 22:12:30 +02:00
|
|
|
*
|
2015-05-22 22:36:01 +02:00
|
|
|
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
2015-05-22 22:12:30 +02:00
|
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
*
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
|
* distribution.
|
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
2015-05-22 22:36:01 +02:00
|
|
|
#ifndef _CONFIGS_LPCXPRESSO_LPC1115_SRC_LPCXPRESSO_LPC1115L_H
|
|
|
|
|
#define _CONFIGS_LPCXPRESSO_LPC1115_SRC_LPCXPRESSO_LPC1115L_H
|
2015-05-22 22:12:30 +02:00
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
|
* Included Files
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
#include <nuttx/compiler.h>
|
|
|
|
|
|
|
|
|
|
/************************************************************************************
|
2015-10-02 22:15:59 +02:00
|
|
|
* Pre-processor Definitions
|
2015-05-22 22:12:30 +02:00
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
/* LPCXpresso LPC1115 board pin usage ***********************************************/
|
|
|
|
|
/* Pin Description Connector On Board Base Board
|
|
|
|
|
* -------------------------------- --------- -------------- ---------------------
|
|
|
|
|
* P0[0]/RD1/TXD3/SDA1 J6-9 I2C E2PROM SDA TXD3/SDA1
|
|
|
|
|
* P0[1]/TD1/RXD3/SCL J6-10 RXD2/SCL1
|
|
|
|
|
* P0[2]/TXD0/AD0[7] J6-21
|
|
|
|
|
* P0[3]/RXD0/AD0[6] J6-22
|
|
|
|
|
* P0[4]/I2SRX-CLK/RD2/CAP2.0 J6-38 CAN_RX2
|
|
|
|
|
* P0[5]/I2SRX-WS/TD2/CAP2.1 J6-39 CAN_TX2
|
|
|
|
|
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] J6-8 SSEL1
|
|
|
|
|
* P0[7]/I2STX_CLK/SCK1/MAT2[1] J6-7 SCK1
|
|
|
|
|
* P0[8]/I2STX_WS/MISO1/MAT2[2] J6-6 MISO1
|
|
|
|
|
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] J6-5 MOSI1
|
|
|
|
|
* P0[10] J6-40 TXD2/SDA2
|
|
|
|
|
* P0[11] J6-41 RXD2/SCL2
|
|
|
|
|
* P0[15]/TXD1/SCK0/SCK J6-13 TXD1/SCK0
|
|
|
|
|
* P0[16]/RXD1/SSEL0/SSEL J6-14 RXD1/SSEL0
|
|
|
|
|
* P0[17]/CTS1/MISO0/MISO J6-12 MISO0
|
|
|
|
|
* P0[18]/DCD1/MOSI0/MOSI J6-11 MOSI0
|
|
|
|
|
* P0[19]/DSR1/SDA1 PAD17 N/A
|
|
|
|
|
* P0[20]/DTR1/SCL1 PAD18 I2C E2PROM SCL N/A
|
|
|
|
|
* P0[21]/RI1/MCIPWR/RD1 J6-23
|
|
|
|
|
* P0[22]/RTS1/TD1 J6-24 LED
|
|
|
|
|
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] J6-15 AD0.0
|
|
|
|
|
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] J6-16 AD0.1
|
|
|
|
|
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 J6-17 AD0.2
|
|
|
|
|
* P0[26]/AD0[3]/AOUT/RXD3 J6-18 AD0.3/AOUT
|
|
|
|
|
* P0[27]/SDA0/USB_SDA J6-25
|
|
|
|
|
* P0[28]/SCL0 J6-26
|
|
|
|
|
* P0[29]/USB_D+ J6-37 USB_D+
|
|
|
|
|
* P0[30]/USB_D- J6-36 USB_D-
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define LPCXPRESSO_I2C1_EPROM_SDA GPIO_I2C1_SDA_1
|
|
|
|
|
#define LPCXPRESSO_I2C1_EPROM_SDL GPIO_I2C1_SCL_2
|
|
|
|
|
#define LPCXPRESSO_LED (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN7)
|
|
|
|
|
|
|
|
|
|
/* P1[0]/ENET-TXD0 J6-34? TXD0 TX-(Ethernet PHY)
|
|
|
|
|
* P1[1]/ENET_TXD1 J6-35? TXD1 TX+(Ethernet PHY)
|
|
|
|
|
* P1[4]/ENET_TX_EN TXEN N/A
|
|
|
|
|
* P1[8]/ENET_CRS CRS_DV/MODE2 N/A
|
|
|
|
|
* P1[9]/ENET_RXD0 J6-32? RXD0/MODE0 RD-(Ethernet PHY)
|
|
|
|
|
* P1[10]/ENET_RXD1 J6-33? RXD1/MODE1 RD+(Ethernet PHY)
|
|
|
|
|
* P1[14]/ENET_RX_ER RXER/PHYAD0 N/A
|
|
|
|
|
* P1[15]/ENET_REF_CLK REFCLK N/A
|
|
|
|
|
* P1[16]/ENET_MDC MDC N/A
|
|
|
|
|
* P1[17]/ENET_MDIO MDIO N/A
|
|
|
|
|
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] PAD1 N/A
|
|
|
|
|
* P1[19]/MC0A/USB_PPWR/N_CAP1.1 PAD2 N/A
|
|
|
|
|
* P1[20]/MCFB0/PWM1.2/SCK0 PAD3 N/A
|
|
|
|
|
* P1[21]/MCABORT/PWM1.3/SSEL0 PAD4 N/A
|
|
|
|
|
* P1[22]/MC0B/USB-PWRD/MAT1.0 PAD5 N/A
|
|
|
|
|
* P1[23]/MCFB1/PWM1.4/MISO0 PAD6 N/A
|
|
|
|
|
* P1[24]/MCFB2/PWM1.5/MOSI0 PAD7 N/A
|
|
|
|
|
* P1[25]/MC1A/MAT1.1 PAD8 N/A
|
|
|
|
|
* P1[26]/MC1B/PWM1.6/CAP0.0 PAD9 N/A
|
|
|
|
|
* P1[27]/CLKOUT/USB-OVRCR-N/CAP0.1 PAD10 N/A
|
|
|
|
|
* P1[28]/MC2A/PCAP1.0/MAT0.0 PAD11 N/A
|
|
|
|
|
* P1[29]/MC2B/PCAP1.1/MAT0.1 PAD12 N/A
|
|
|
|
|
* P1[30]/VBUS/AD0[4] J6-19 AD0.4
|
|
|
|
|
* P1[31]/SCK1/AD0[5] J6-20 AD0.5
|
|
|
|
|
*
|
|
|
|
|
* P2[0]/PWM1.1/TXD1 J6-42 PWM1.1
|
|
|
|
|
* P2[1]/PWM1.2/RXD1 J6-43 PWM1.2
|
|
|
|
|
* P2[2]/PWM1.3/CTS1/TRACEDATA[3] J6-44 PWM1.3
|
|
|
|
|
* P2[3]/PWM1.4/DCD1/TRACEDATA[2] J6-45 PWM1.4
|
|
|
|
|
* P2[4]/PWM1.5/DSR1/TRACEDATA[1] J6-46 PWM1.5
|
|
|
|
|
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] J6-47 PWM1.6
|
|
|
|
|
* P2[6]/PCAP1[0]/RI1/TRACECLK J6-48
|
|
|
|
|
* P2[7]/RD2/RTS1 J6-49
|
|
|
|
|
* P2[8]/TD2/TXD2 J6-50
|
|
|
|
|
* P2[9]/USB_CONNECT/RXD2 PAD19 USB Pullup N/A
|
|
|
|
|
* P2[10]/EINT0/NMI J6-51
|
|
|
|
|
* P2[11]/EINT1/I2STX_CLK J6-52
|
|
|
|
|
* P2[12]/EINT2/I2STX_WS J6-53
|
|
|
|
|
* P2[13]/EINT3/I2STX_SDA J6-27
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define LPCXPRESSO_USB_PULLUP (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN9)
|
|
|
|
|
|
|
|
|
|
/* P3[25]/MAT0.0/PWM1.2 PAD13 N/A
|
|
|
|
|
* P3[26]/STCLK/MAT0.1/PWM1.3 PAD14 N/A
|
|
|
|
|
*
|
|
|
|
|
* P4[28]/RX-MCLK/MAT2.0/TXD3 PAD15 N/A
|
|
|
|
|
* P4[29]/TX-MCLK/MAT2.1/RXD3 PAD16 N/A
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* SD Slot
|
|
|
|
|
*
|
|
|
|
|
* Base-board J4/J6 LPC1115
|
|
|
|
|
* SD Signal Pin Pin
|
|
|
|
|
* --- ----------- ----- --------
|
|
|
|
|
* CS PIO1_11* 55 P2.2 (See LPCXPRESSO_SD_CS)
|
2015-05-22 22:36:01 +02:00
|
|
|
* DIN PIO0_9-MOSI 5 P0.9 MOSI1 (See GPIO_SSP1_MOSI in chip/lpc11_ssp.h)
|
|
|
|
|
* DOUT PIO0_8-MISO 6 P0.8 MISO1 (See GPIO_SSP1_MISO in chip/lpc11_ssp.h)
|
2015-05-22 22:12:30 +02:00
|
|
|
* CLK PIO2_11-SCK 7 P0.9 SCK1 (See GPIO_SSP1_SCK in board.h)
|
|
|
|
|
* CD PIO2_10 52 P2.11 (See LPCXPRESSO_SD_CD)
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define LPCXPRESSO_SD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN2)
|
2016-07-22 22:23:31 +02:00
|
|
|
#ifdef CONFIG_LPC11_GPIOIRQ
|
2015-05-22 22:12:30 +02:00
|
|
|
# define LPCXPRESSO_SD_CD (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
|
|
|
|
#else
|
|
|
|
|
# define LPCXPRESSO_SD_CD (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* USB:
|
|
|
|
|
*
|
|
|
|
|
* Base-board J4/J6 LPC1115
|
|
|
|
|
* Signal Pin Pin
|
|
|
|
|
* ------------------- ----- --------
|
|
|
|
|
* USB_DM 36 P0.30/USB-D-
|
|
|
|
|
* USB_DP 37 P0.29/USB-D+
|
|
|
|
|
* N/C N/C P1.18/USB-UP-LED/PWM1.1/CAP1.0
|
|
|
|
|
* PIO1_3 (not used) 19 P1.30/VBUS/AD0.4
|
|
|
|
|
* N/C N/C P2.9/USB-CONNECT/RXD2 (See Notes)
|
|
|
|
|
* ------------------- ----- --------
|
|
|
|
|
* PIO0_6-USB_CONNECT* 23 P0.21/RI1/RD1
|
|
|
|
|
* PIO0_3-VBUS_SENSE 39 P0.5/I2SRX-WS/TD2/CAP2.1
|
|
|
|
|
*
|
|
|
|
|
* Notes:
|
|
|
|
|
* - The standard USB CONNECT (P0.9) provides USB D+ pullup on board the
|
|
|
|
|
* LPCXpresso card; it should be un-necessary to use the based board
|
|
|
|
|
* version of the pullup.
|
|
|
|
|
* - No changes to jumper settings are required. There are few USB-
|
|
|
|
|
* related jumpers on the based board, but none are required:
|
|
|
|
|
* - J14 must be set to permit GPIO control of the base board USB
|
|
|
|
|
* connect pin. NOT USED
|
|
|
|
|
* - J12 must be set to permit GPIO control of the USB vbus sense pin
|
|
|
|
|
* - The standard VBUS (P1.30) is not connected. As a consequence, the
|
|
|
|
|
* USB driver will not correctly respond to USB insertion or removal
|
|
|
|
|
* events.
|
|
|
|
|
* - The standard USB LED (P1.18) is not connected.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define LPCXPRESSO_USB_CONNECT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
|
2016-07-22 22:23:31 +02:00
|
|
|
#ifdef CONFIG_LPC11_GPIOIRQ
|
2015-05-22 22:12:30 +02:00
|
|
|
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
|
|
|
|
#else
|
|
|
|
|
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* 96x64 White OLED with I2C/SPI interface
|
|
|
|
|
*
|
|
|
|
|
* ----------------------------+-------+-------------- -----------------------------
|
|
|
|
|
* LPC1758 Pin | J4/6 | Base Board Description
|
|
|
|
|
* ----------------------------+-------+-------------- -----------------------------
|
|
|
|
|
* P2.1/PWM1.2/RXD1 | 43 | PIO1_10 FAN5331 Power Control (SHDN#)
|
|
|
|
|
* P0.6/I2SRX-SDA/SSEL1/MAT2.0 | 8 | PIO0_2 OLED chip select (CS#)
|
|
|
|
|
* P2.7/RD2/RTS1 | 49 | PIO2_7 OLED command/data (D/C#)
|
|
|
|
|
* P0.7/I2STX-CLK/SCK1/MAT2.1 | 7 | PIO2_11-SCK OLED clock (D0)
|
|
|
|
|
* P0.9/I2STX-SDA/MOSI1/MAT2.3 | 5 | PIO0_9-MOSI OLED data in (D1)
|
|
|
|
|
* ----------------------------+-------+-------------- -----------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define LPCXPRESSO_OLED_POWER (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN1)
|
|
|
|
|
#define LPCXPRESSO_OLED_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN6)
|
|
|
|
|
#define LPCXPRESSO_OLED_DC (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN7)
|
|
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
|
* Public Types
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
|
* Public data
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
|
* Public Functions
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
/************************************************************************************
|
2016-02-04 17:24:32 +01:00
|
|
|
* Name: lpcxpresso_sspdev_initialize
|
2015-05-22 22:12:30 +02:00
|
|
|
*
|
|
|
|
|
* Description:
|
|
|
|
|
* Called to configure SPI chip select GPIO pins for the LPCXpresso board.
|
|
|
|
|
*
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
2016-02-04 17:24:32 +01:00
|
|
|
void weak_function lpcxpresso_sspdev_initialize(void);
|
2015-05-22 22:12:30 +02:00
|
|
|
|
|
|
|
|
#endif /* __ASSEMBLY__ */
|
2015-05-22 22:36:01 +02:00
|
|
|
#endif /* _CONFIGS_LPCXPRESSO_LPC1115_SRC_LPCXPRESSO_LPC1115L_H */
|
