sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
2366c13f87
nuttx/configs/lpcxpresso-lpc54628/nsh/defconfig

62 lines
1.4 KiB
Plaintext
Raw Normal View History

This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
# CONFIG_ARCH_FPU is not set
CONFIG_ARCH_BOARD_LPCXPRESSO_LPC54628=y
CONFIG_ARCH_BOARD="lpcxpresso-lpc54628"
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_ARCH_BUTTONS=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_ARCH_CHIP_LPC54628=y
CONFIG_ARCH_CHIP_LPC54XX=y
arch/arm/src/lpc54xx: Add (incomplete) Ethernet register definition file. Add framework for an Ethernet driver. Initial commit is just the drivers/skeleton.c with naming updated for the LPC54.
2017-12-26 19:55:58 +01:00
CONFIG_ARCH_INTERRUPTSTACK=2048
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_ARCH_IRQBUTTONS=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_STDARG_H=y
CONFIG_ARCH="arm"
confifgs/lpcxpresso-lpc54628: Calibrate delay loop.
2017-12-19 15:21:41 +01:00
CONFIG_BOARD_LOOPSPERMSEC=21082
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 15:54:24 +01:00
CONFIG_BUILTIN=y
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_BUTTONS_LOWER=y
CONFIG_BUTTONS=y
CONFIG_EXAMPLES_BUTTONS=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_EXAMPLES_NSH=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 15:54:24 +01:00
CONFIG_FS_PROCFS=y
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 18:38:55 +01:00
CONFIG_I2C=y
CONFIG_I2CTOOL_MAXBUS=9
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_INPUT=y
arch/arm/src/lpc54xx: Add configuartion support and logic it all none, some, or all of the external RAM to the system heap.
2017-12-12 18:33:18 +01:00
CONFIG_LPC54_EMC_DYNAMIC_CS0=y
arch/arm/src/lpc54xx: Bring in NXP support for external SDRAM.
2017-12-10 23:07:30 +01:00
CONFIG_LPC54_EMC=y
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_LPC54_GPIOIRQ=y
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 18:38:55 +01:00
CONFIG_LPC54_I2C2_MASTER=y
arch/arm/src/lpc54xx: Add an RTC driver and a RTC character driver lower half. configs/lpcxpresso-lpc54628: Add logic to register the RTC character driver if it is enabled. Enable the RTC and RTC character driver in the NSH configuration.
2017-12-25 20:56:06 +01:00
CONFIG_LPC54_RTC=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_LPC54_USART0=y
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 15:54:24 +01:00
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=4
configs/lpcxpresso-lpc54628: Add an NxWM configuration. Not yet functional.
2017-12-18 20:33:37 +01:00
CONFIG_RAM_SIZE=163840
configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations.
2018-01-13 15:34:58 +01:00
CONFIG_RAM_START=0x20000000
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
arch/arm/src/lpc54xx: Add an RTC driver and a RTC character driver lower half. configs/lpcxpresso-lpc54628: Add logic to register the RTC character driver if it is enabled. Enable the RTC and RTC character driver in the NSH configuration.
2017-12-25 20:56:06 +01:00
CONFIG_RTC_ALARM=y
CONFIG_RTC_DRIVER=y
CONFIG_RTC_IOCTL=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_START_DAY=2
CONFIG_START_MONTH=12
CONFIG_SYMTAB_ORDEREDBYNAME=y
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 18:38:55 +01:00
CONFIG_SYSTEM_I2CTOOL=y
arch/arm/src/lpc54xx: Bring in NXP support for external SRAM.
2017-12-10 23:52:15 +01:00
CONFIG_SYSTEM_RAMTEST=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_TASK_NAME_SIZE=0
CONFIG_USART0_SERIAL_CONSOLE=y
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WDOG_INTRESERVE=0
Reference in New Issue Copy Permalink