nuttx/mm/mm_heap/mm_malloc.c

388 lines
10 KiB
C
Raw Normal View History

/****************************************************************************
* mm/mm_heap/mm_malloc.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <debug.h>
Merged in paimonen/nuttx/pullreq_libc_libnx_updates (pull request #757) Pullreq libc libnx updates * NuttX: make strerror() return 'Success' for 0 * NuttX: fix strrchr() so that it considers null terminator as part of string From strrchr(3) man page: "The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator." * NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early. It's easier to find the source when asserts fail already when freeing an overflowed buffer, than if the corruption is only detected on next malloc(). * MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs() This is helpful for detecting uninitialized variables, especially in C++ code. I seem to be forgetting to initialize member variables and then they just get random values.. * NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen. * nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also. * NuttX: Fix kerning of 'I' in Sans17x22 font The I character was running together with some other characters, e.g. in sequence "IMI". * NXMU: Revalidate window pointer for mouse events. NXMU caches the previous window pointer so that further mouse events can be sent to the same window. However, if the window is destroyed while mouse button is held down, the pointer may become invalid and cause a crash. This patch revalidates the pointer before using it. Approved-by: GregoryN <gnutt@nuttx.org>
2018-11-12 16:36:35 +01:00
#include <string.h>
#include <nuttx/arch.h>
#include <nuttx/mm/mm.h>
#include <nuttx/mm/kasan.h>
#include <nuttx/sched.h>
#include "mm_heap/mm.h"
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: free_delaylist
*
* Description:
* Free the memory in delay list either added because of mm_lock failed or
* added because of CONFIG_MM_FREE_DELAYCOUNT_MAX.
* Set force to true to free all the memory in delay list immediately, set
* to false will only free delaylist when time is up if
* CONFIG_MM_FREE_DELAYCOUNT_MAX is enabled.
*
* Return true if there is memory freed.
*
****************************************************************************/
static bool free_delaylist(FAR struct mm_heap_s *heap, bool force)
{
bool ret = false;
#if defined(CONFIG_BUILD_FLAT) || defined(__KERNEL__)
FAR struct mm_delaynode_s *tmp;
irqstate_t flags;
/* Move the delay list to local */
flags = up_irq_save();
tmp = heap->mm_delaylist[this_cpu()];
#if CONFIG_MM_FREE_DELAYCOUNT_MAX > 0
if (tmp == NULL ||
(!force &&
heap->mm_delaycount[this_cpu()] < CONFIG_MM_FREE_DELAYCOUNT_MAX))
{
up_irq_restore(flags);
return false;
}
heap->mm_delaycount[this_cpu()] = 0;
#endif
heap->mm_delaylist[this_cpu()] = NULL;
up_irq_restore(flags);
/* Test if the delayed is empty */
ret = tmp != NULL;
while (tmp)
{
FAR void *address;
/* Get the first delayed deallocation */
address = tmp;
tmp = tmp->flink;
/* The address should always be non-NULL since that was checked in the
* 'while' condition above.
*/
mm_delayfree(heap, address, false);
}
#endif
return ret;
}
#if CONFIG_MM_BACKTRACE >= 0
void mm_dump_handler(FAR struct tcb_s *tcb, FAR void *arg)
{
struct mallinfo_task info;
struct malltask task;
task.pid = tcb ? tcb->pid : PID_MM_LEAK;
task.seqmin = 0;
task.seqmax = ULONG_MAX;
info = mm_mallinfo_task(arg, &task);
mwarn("pid:%5d, used:%10d, nused:%10d\n",
task.pid, info.uordblks, info.aordblks);
}
#endif
#ifdef CONFIG_MM_HEAP_MEMPOOL
void mm_mempool_dump_handle(FAR struct mempool_s *pool, FAR void *arg)
{
struct mempoolinfo_s info;
mempool_info(pool, &info);
mwarn("%9lu%11lu%9lu%9lu%9lu%9lu\n",
info.sizeblks, info.arena, info.aordblks,
info.ordblks, info.iordblks, info.nwaiter);
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mm_free_delaylist
*
* Description:
* force freeing the delaylist of this heap.
*
****************************************************************************/
void mm_free_delaylist(FAR struct mm_heap_s *heap)
{
if (heap)
{
free_delaylist(heap, true);
}
}
/****************************************************************************
* Name: mm_malloc
*
* Description:
* Find the smallest chunk that satisfies the request. Take the memory from
* that chunk, save the remaining, smaller chunk (if any).
*
* 8-byte alignment of the allocated data is assured.
*
****************************************************************************/
FAR void *mm_malloc(FAR struct mm_heap_s *heap, size_t size)
{
FAR struct mm_freenode_s *node;
size_t alignsize;
size_t nodesize;
FAR void *ret = NULL;
int ndx;
/* Free the delay list first */
free_delaylist(heap, false);
#ifdef CONFIG_MM_HEAP_MEMPOOL
if (heap->mm_mpool)
{
ret = mempool_multiple_alloc(heap->mm_mpool, size);
if (ret != NULL)
{
return ret;
}
}
#endif
/* Adjust the size to account for (1) the size of the allocated node and
* (2) to make sure that it is aligned with MM_ALIGN and its size is at
* least MM_MIN_CHUNK.
*/
if (size < MM_MIN_CHUNK - MM_ALLOCNODE_OVERHEAD)
{
size = MM_MIN_CHUNK - MM_ALLOCNODE_OVERHEAD;
}
alignsize = MM_ALIGN_UP(size + MM_ALLOCNODE_OVERHEAD);
if (alignsize < size)
{
/* There must have been an integer overflow */
return NULL;
}
DEBUGASSERT(alignsize >= MM_ALIGN);
/* We need to hold the MM mutex while we muck with the nodelist. */
DEBUGVERIFY(mm_lock(heap));
/* Convert the request size into a nodelist index */
ndx = mm_size2ndx(alignsize);
/* Search for a large enough chunk in the list of nodes. This list is
* ordered by size, but will have occasional zero sized nodes as we visit
* other mm_nodelist[] entries.
*/
for (node = heap->mm_nodelist[ndx].flink; node; node = node->flink)
2020-02-13 09:06:05 +01:00
{
DEBUGASSERT(node->blink->flink == node);
nodesize = MM_SIZEOF_NODE(node);
if (nodesize >= alignsize)
{
break;
}
2020-02-13 09:06:05 +01:00
}
/* If we found a node with non-zero size, then this is one to use. Since
* the list is ordered, we know that it must be the best fitting chunk
* available.
*/
if (node)
{
FAR struct mm_freenode_s *remainder;
FAR struct mm_freenode_s *next;
size_t remaining;
/* Remove the node. There must be a predecessor, but there may not be
* a successor node.
*/
DEBUGASSERT(node->blink);
node->blink->flink = node->flink;
if (node->flink)
{
node->flink->blink = node->blink;
}
/* Get a pointer to the next node in physical memory */
next = (FAR struct mm_freenode_s *)(((FAR char *)node) + nodesize);
/* Node next must be alloced, otherwise it should be merged.
* Its prenode(the founded node) must be free and preceding should
* match with nodesize.
*/
DEBUGASSERT(MM_NODE_IS_ALLOC(next) && MM_PREVNODE_IS_FREE(next) &&
next->preceding == nodesize);
/* Check if we have to split the free node into one of the allocated
* size and another smaller freenode. In some cases, the remaining
* bytes can be smaller (they may be MM_SIZEOF_ALLOCNODE). In that
* case, we will just carry the few wasted bytes at the end of the
* allocation.
*/
remaining = nodesize - alignsize;
if (remaining >= MM_MIN_CHUNK)
{
/* Create the remainder node */
remainder = (FAR struct mm_freenode_s *)
(((FAR char *)node) + alignsize);
remainder->size = remaining;
/* Adjust the size of the node under consideration */
node->size = alignsize | (node->size & MM_MASK_BIT);
/* Adjust the 'preceding' size of the (old) next node. */
next->preceding = remaining;
/* Add the remainder back into the nodelist */
mm_addfreechunk(heap, remainder);
}
else
{
/* Previous physical memory node is alloced, so clear the previous
* free bit in next->size.
*/
next->size &= ~MM_PREVFREE_BIT;
}
/* Update heap statistics */
heap->mm_curused += MM_SIZEOF_NODE(node);
if (heap->mm_curused > heap->mm_maxused)
{
heap->mm_maxused = heap->mm_curused;
}
/* Handle the case of an exact size match */
node->size |= MM_ALLOC_BIT;
ret = (FAR void *)((FAR char *)node + MM_SIZEOF_ALLOCNODE);
}
2020-02-13 09:06:05 +01:00
DEBUGASSERT(ret == NULL || mm_heapmember(heap, ret));
mm_unlock(heap);
Merged in paimonen/nuttx/pullreq_libc_libnx_updates (pull request #757) Pullreq libc libnx updates * NuttX: make strerror() return 'Success' for 0 * NuttX: fix strrchr() so that it considers null terminator as part of string From strrchr(3) man page: "The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator." * NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early. It's easier to find the source when asserts fail already when freeing an overflowed buffer, than if the corruption is only detected on next malloc(). * MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs() This is helpful for detecting uninitialized variables, especially in C++ code. I seem to be forgetting to initialize member variables and then they just get random values.. * NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen. * nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also. * NuttX: Fix kerning of 'I' in Sans17x22 font The I character was running together with some other characters, e.g. in sequence "IMI". * NXMU: Revalidate window pointer for mouse events. NXMU caches the previous window pointer so that further mouse events can be sent to the same window. However, if the window is destroyed while mouse button is held down, the pointer may become invalid and cause a crash. This patch revalidates the pointer before using it. Approved-by: GregoryN <gnutt@nuttx.org>
2018-11-12 16:36:35 +01:00
if (ret)
{
MM_ADD_BACKTRACE(heap, node);
ret = kasan_unpoison(ret, mm_malloc_size(heap, ret));
#ifdef CONFIG_MM_FILL_ALLOCATIONS
memset(ret, MM_ALLOC_MAGIC, alignsize - MM_ALLOCNODE_OVERHEAD);
Merged in paimonen/nuttx/pullreq_libc_libnx_updates (pull request #757) Pullreq libc libnx updates * NuttX: make strerror() return 'Success' for 0 * NuttX: fix strrchr() so that it considers null terminator as part of string From strrchr(3) man page: "The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator." * NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early. It's easier to find the source when asserts fail already when freeing an overflowed buffer, than if the corruption is only detected on next malloc(). * MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs() This is helpful for detecting uninitialized variables, especially in C++ code. I seem to be forgetting to initialize member variables and then they just get random values.. * NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen. * nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also. * NuttX: Fix kerning of 'I' in Sans17x22 font The I character was running together with some other characters, e.g. in sequence "IMI". * NXMU: Revalidate window pointer for mouse events. NXMU caches the previous window pointer so that further mouse events can be sent to the same window. However, if the window is destroyed while mouse button is held down, the pointer may become invalid and cause a crash. This patch revalidates the pointer before using it. Approved-by: GregoryN <gnutt@nuttx.org>
2018-11-12 16:36:35 +01:00
#endif
#ifdef CONFIG_DEBUG_MM
minfo("Allocated %p, size %zu\n", ret, alignsize);
#endif
}
#if CONFIG_MM_FREE_DELAYCOUNT_MAX > 0
/* Try again after free delay list */
else if (free_delaylist(heap, true))
{
return mm_malloc(heap, size);
}
#endif
#ifdef CONFIG_DEBUG_MM
else if (MM_INTERNAL_HEAP(heap))
{
#ifdef CONFIG_MM_DUMP_ON_FAILURE
struct mallinfo minfo;
# ifdef CONFIG_MM_DUMP_DETAILS_ON_FAILURE
struct mm_memdump_s dump =
{
PID_MM_ALLOC, 0, ULONG_MAX
};
# endif
#endif
mwarn("WARNING: Allocation failed, size %zu\n", alignsize);
#ifdef CONFIG_MM_DUMP_ON_FAILURE
minfo = mm_mallinfo(heap);
mwarn("Total:%d, used:%d, free:%d, largest:%d, nused:%d, nfree:%d\n",
minfo.arena, minfo.uordblks, minfo.fordblks,
minfo.mxordblk, minfo.aordblks, minfo.ordblks);
# if CONFIG_MM_BACKTRACE >= 0
nxsched_foreach(mm_dump_handler, heap);
mm_dump_handler(NULL, heap);
# endif
# ifdef CONFIG_MM_HEAP_MEMPOOL
mwarn("%11s%9s%9s%9s%9s%9s\n",
"bsize", "total", "nused",
"nfree", "nifree", "nwaiter");
mempool_multiple_foreach(heap->mm_mpool,
mm_mempool_dump_handle, NULL);
# endif
# ifdef CONFIG_MM_DUMP_DETAILS_ON_FAILURE
mm_memdump(heap, &dump);
# endif
#endif
#ifdef CONFIG_MM_PANIC_ON_FAILURE
PANIC();
#endif
}
#endif
DEBUGASSERT(ret == NULL || ((uintptr_t)ret) % MM_ALIGN == 0);
return ret;
}