2017-07-09 19:48:28 +02:00
|
|
|
/************************************************************************************
|
|
|
|
* configs/b-l475e-iot01a/include/board.h
|
|
|
|
*
|
|
|
|
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
|
|
|
* Author: Simon Piriou <spiriou31@gmail.com>
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
*
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
* distribution.
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
#ifndef __CONFIG_B_L475E_IOT01A_INCLUDE_BOARD_H
|
|
|
|
#define __CONFIG_B_L475E_IOT01A_INCLUDE_BOARD_H
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
* Included Files
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
# include <stdbool.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
* Pre-processor Definitions
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
|
|
|
|
#include <arch/board/b-l475e-iot01a_clock.h>
|
|
|
|
|
|
|
|
/* LED definitions ******************************************************************/
|
|
|
|
/* LEDs
|
|
|
|
*
|
|
|
|
* Two user LEDs are available on pins PA5 and PB14.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
|
|
|
|
#define BOARD_LED1 0
|
|
|
|
#define BOARD_LED2 1
|
|
|
|
#define BOARD_NLEDS 2
|
|
|
|
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
|
|
|
|
|
|
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
|
|
|
|
* defined. In that case, the usage by the board port is defined in
|
|
|
|
* include/board.h and src/sam_autoleds.c. The LEDs are used to encode
|
|
|
|
* OS-related events as follows:
|
|
|
|
*
|
|
|
|
* ------------------- ---------------------------- ------
|
|
|
|
* SYMBOL Meaning LED
|
|
|
|
* ------------------- ---------------------------- ------ */
|
|
|
|
|
|
|
|
#define LED_STARTED 0 /* NuttX has been started OFF */
|
|
|
|
#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */
|
|
|
|
#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */
|
|
|
|
#define LED_STACKCREATED 1 /* Idle stack created ON */
|
|
|
|
#define LED_INIRQ 2 /* In an interrupt N/C */
|
|
|
|
#define LED_SIGNAL 2 /* In a signal handler N/C */
|
|
|
|
#define LED_ASSERTION 2 /* An assertion failed N/C */
|
|
|
|
#define LED_PANIC 3 /* The system has crashed FLASH */
|
|
|
|
#undef LED_IDLE /* MCU is is sleep mode Not used */
|
|
|
|
|
|
|
|
/* Thus if LED is statically on, NuttX has successfully booted and is,
|
|
|
|
* apparently, running normally. If LED is flashing at approximately
|
|
|
|
* 2Hz, then a fatal error has been detected and the system has halted.
|
|
|
|
*/
|
|
|
|
|
2017-07-25 00:46:30 +02:00
|
|
|
/* SPSGRF-915 Spirit1 library definitions ***********************************(*******/
|
|
|
|
|
|
|
|
/* The TX_WAIT_PCKT_PERIOD should equal the max packet tx time. */
|
|
|
|
|
|
|
|
#define SPIRIT_TX_WAIT_PCKT_PERIOD 50
|
|
|
|
|
|
|
|
/* The RX_WAIT_ACK_PERIOD is the period within which the ACK packet must be received.
|
|
|
|
* ca PACKET_LENGTH / DATA_RATE + ELABORATION_TIME + SPI_OPERATIONS_USED.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define SPIRIT_RX_WAIT_ACK_PERIOD 50
|
|
|
|
|
|
|
|
#define SPIRIT_CCA_THRESHOLD -90.0 /* dBm */
|
|
|
|
#define SPIRIT_XTAL_FREQUENCY 50000000 /* Hz */
|
|
|
|
#define SPIRIT_XTAL_OFFSET_PPM 0
|
|
|
|
#define SPIRIT_BASE_FREQUENCY 868.0e6
|
|
|
|
#define SPIRIT_CHANNEL_SPACE 20e3
|
|
|
|
#define SPIRIT_CHANNEL_NUMBER 0
|
|
|
|
#define SPIRIT_MODULATION_SELECT FSK
|
|
|
|
#define SPIRIT_DATARATE 38400
|
|
|
|
#define SPIRIT_FREQ_DEVIATION 20e3
|
|
|
|
#define SPIRIT_BANDWIDTH 100.5E3
|
|
|
|
#define SPIRIT_POWER_DBM 10.0
|
|
|
|
#define SPIRIT_PREAMBLE_LENGTH PKT_PREAMBLE_LENGTH_04BYTES
|
|
|
|
#define SPIRIT_SYNC_LENGTH PKT_SYNC_LENGTH_4BYTES
|
|
|
|
#define SPIRIT_SYNC_WORD 0x88888888
|
|
|
|
#define SPIRIT_CRC_MODE PKT_CRC_MODE_16BITS_2
|
|
|
|
#define SPIRIT_CONTROL_LENGTH PKT_CONTROL_LENGTH_0BYTES
|
|
|
|
#define SPIRIT_EN_FEC S_DISABLE
|
|
|
|
#define SPIRIT_EN_WHITENING S_DISABLE
|
|
|
|
#define SPIRIT_RANGE_TYPE RANGE_EXT_NONE /* RANGE_EXT_SKYWORKS */
|
|
|
|
|
|
|
|
/* Spirit1 IC version */
|
|
|
|
|
|
|
|
#define SPIRIT_VERSION SPIRIT_VERSION_3_0
|
|
|
|
|
2017-07-09 19:48:28 +02:00
|
|
|
/* Alternate function pin selections ************************************************/
|
|
|
|
|
|
|
|
/* USART1: Connected to STLink Debug via PB6, PB7 */
|
|
|
|
|
|
|
|
#define GPIO_USART1_RX GPIO_USART1_RX_2
|
|
|
|
#define GPIO_USART1_TX GPIO_USART1_TX_2
|
|
|
|
|
|
|
|
/* UART4: Connected to arduino compatible pins DO/D1 via PA0, PA1 */
|
|
|
|
|
|
|
|
#define GPIO_UART4_RX GPIO_UART4_RX_1
|
|
|
|
#define GPIO_UART4_TX GPIO_UART4_TX_1
|
|
|
|
|
2017-07-25 00:46:30 +02:00
|
|
|
/* SPSGRF
|
|
|
|
*
|
|
|
|
* -------- ----------------------- ----------------
|
|
|
|
* SPSGRF Board Signal STM32L4 pin
|
|
|
|
* -------- ----------------------- ----------------
|
|
|
|
* SPI_CLK INTERNAL-SPI3_SCK PC10 SPI3_SCK
|
|
|
|
* SPI_MISO INTERNAL-SPI3_MISO PC11 SPI3_MISO
|
|
|
|
* SPI_MOSI INTERNAL-SPI3_MOSI PC12 SPI3_MOSI
|
|
|
|
* SPI_CS SPSGRF-915-SPI3_CSN PB5 GPIO_Output
|
|
|
|
* GPIO(3) SPSGRF-915-GPIO3_EXTI5 PE5 GPIO_EXTI5
|
|
|
|
* GPIO(2) N/C N/A
|
|
|
|
* GPIO(1) N/C N/A
|
|
|
|
* GPIO(0) N/C N/A
|
|
|
|
* SDN SPSGRF-915-SDN PB15 GPIO_Output
|
|
|
|
* -------- ----------------------- ----------------
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define GPIO_SPI3_SCK GPIO_SPI3_SCK_2
|
|
|
|
#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2
|
|
|
|
#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_2
|
|
|
|
|
2017-08-06 18:52:12 +02:00
|
|
|
/* Quad SPI: connected to MX25R6435F external flash memory */
|
|
|
|
|
|
|
|
#define GPIO_QSPI_CS (GPIO_QSPI_NCS_2 | GPIO_FLOAT | GPIO_PUSHPULL | GPIO_SPEED_100MHz)
|
|
|
|
#define GPIO_QSPI_IO0 (GPIO_QSPI_BK1_IO0_2 | GPIO_FLOAT | GPIO_PUSHPULL | GPIO_SPEED_100MHz)
|
|
|
|
#define GPIO_QSPI_IO1 (GPIO_QSPI_BK1_IO1_2 | GPIO_FLOAT | GPIO_PUSHPULL | GPIO_SPEED_100MHz)
|
|
|
|
#define GPIO_QSPI_IO2 (GPIO_QSPI_BK1_IO2_2 | GPIO_FLOAT | GPIO_PUSHPULL | GPIO_SPEED_100MHz)
|
|
|
|
#define GPIO_QSPI_IO3 (GPIO_QSPI_BK1_IO3_2 | GPIO_FLOAT | GPIO_PUSHPULL | GPIO_SPEED_100MHz)
|
|
|
|
#define GPIO_QSPI_SCK (GPIO_QSPI_CLK_2 | GPIO_FLOAT | GPIO_PUSHPULL | GPIO_SPEED_100MHz)
|
|
|
|
|
2017-07-09 19:48:28 +02:00
|
|
|
/************************************************************************************
|
|
|
|
* Public Data
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
|
|
#undef EXTERN
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
#define EXTERN extern "C"
|
|
|
|
extern "C"
|
|
|
|
{
|
|
|
|
#else
|
|
|
|
#define EXTERN extern
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
* Public Function Prototypes
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
#undef EXTERN
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
#endif /* __CONFIG_B_L475E_IOT01A_INCLUDE_BOARD_H */
|