nuttx/drivers/bch/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menuconfig BCH
	bool "Block-to-Character (BCH) Support"
	default n
	---help---
		Contains logic that may be used to convert a block driver into
		a character driver.  This is the complementary conversion as that
		performed by loop.c.  See include/nuttx/drivers/drivers.h for
		registration information.

if BCH

config BCH_ENCRYPTION
	bool "Enable BCH encryption"
	default n
	depends on CRYPTO_AES

config BCH_ENCRYPTION_KEY_SIZE
	int "AES key size"
	default 16
	depends on BCH_ENCRYPTION

config BCH_BUFFER_ALIGNMENT
	int "Buffer aligned bytes"
	default 0

config BCH_DEVICE_READONLY
	bool "Set BCH device readonly"
	default n
	---help---
		Set bch devices read-only

endif # BCH
Adding skeleton Kconfig files (part 1 of 2) git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3 2012-04-06 17:49:35 +02:00			`#`
			`# For a description of the syntax of this configuration file,`
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 16:08:57 +02:00			`# see the file kconfig-language.txt in the NuttX tools repository.`
Adding skeleton Kconfig files (part 1 of 2) git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3 2012-04-06 17:49:35 +02:00			`#`
BCH: Add configurable AES encryption support to block-to-character (BCH) driver. This allows any block device to be accessed as an encrypted character device. From Max Nekludov 2014-07-07 16:00:00 +02:00
drivers/*/Kconfig: Consolidate driver Kconfig Files. This commit does two things: 1. First, it reorganizes the driver Kconfig files so that each is self contained. Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig. Now, all of the driver configuration is consolitated in the latter. 2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files. This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well. The nature of the introduced error was basically this: - Nothing must intervene between the menuconfig selection and the following conditional configuration otpions. - A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus. This error was easy to make because the driver Kconfig files were not well modularized. Making them fully self-contained should eliminate this kind of error in the future. 2020-02-15 14:38:35 +01:00			`menuconfig BCH`
			`bool "Block-to-Character (BCH) Support"`
			`default n`
			`---help---`
			`Contains logic that may be used to convert a block driver into`
			`a character driver. This is the complementary conversion as that`
			`performed by loop.c. See include/nuttx/drivers/drivers.h for`
			`registration information.`

drivers/Kconfig: Move if/endif to subfolder Kconfig Move if/endif to subfolder Kconfig and make ARCH_HAVE_XXX option always selectable by moving out of if/endif 2020-02-08 08:30:09 +01:00			`if BCH`

BCH: Add configurable AES encryption support to block-to-character (BCH) driver. This allows any block device to be accessed as an encrypted character device. From Max Nekludov 2014-07-07 16:00:00 +02:00			`config BCH_ENCRYPTION`
SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 16:03:18 +02:00			`bool "Enable BCH encryption"`
BCH: Add configurable AES encryption support to block-to-character (BCH) driver. This allows any block device to be accessed as an encrypted character device. From Max Nekludov 2014-07-07 16:00:00 +02:00			`default n`
			`depends on CRYPTO_AES`

			`config BCH_ENCRYPTION_KEY_SIZE`
			`int "AES key size"`
			`default 16`
Ensure all source code end with one and only one newline by this command: git ls-files -z \| while IFS= read -rd '' f; do tail -c1 < "$f" \| read -r _ \|\| echo >> "$f"; done 2020-02-07 14:17:25 +01:00			`depends on BCH_ENCRYPTION`
drivers/Kconfig: Move if/endif to subfolder Kconfig Move if/endif to subfolder Kconfig and make ARCH_HAVE_XXX option always selectable by moving out of if/endif 2020-02-08 08:30:09 +01:00
bch: specify the alignment of bch buffer by CONFIG_BCH_BUFFER_ALIGNMENT Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> 2021-12-06 15:53:21 +01:00			`config BCH_BUFFER_ALIGNMENT`
			`int "Buffer aligned bytes"`
			`default 0`

BCH: Add readonly configuration for BCH devices Signed-off-by: Shoukui Zhang <zhangshoukui@xiaomi.com> 2023-12-11 04:27:40 +01:00			`config BCH_DEVICE_READONLY`
			`bool "Set BCH device readonly"`
			`default n`
			`---help---`
			`Set bch devices read-only`

drivers/Kconfig: Move if/endif to subfolder Kconfig Move if/endif to subfolder Kconfig and make ARCH_HAVE_XXX option always selectable by moving out of if/endif 2020-02-08 08:30:09 +01:00			`endif # BCH`