Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
/****************************************************************************
|
|
|
|
* net/route/net_queue_ramroute.c
|
|
|
|
*
|
2024-09-11 14:39:39 +02:00
|
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
|
|
*
|
2021-02-19 12:45:37 +01:00
|
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
|
|
* this work for additional information regarding copyright ownership. The
|
|
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
|
|
* "License"); you may not use this file except in compliance with the
|
|
|
|
* License. You may obtain a copy of the License at
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
*
|
2021-02-19 12:45:37 +01:00
|
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
*
|
2021-02-19 12:45:37 +01:00
|
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
|
|
* License for the specific language governing permissions and limitations
|
|
|
|
* under the License.
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
*
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
* Included Files
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
|
|
#include "route/ramroute.h"
|
|
|
|
#include "route/route.h"
|
|
|
|
|
2017-09-28 20:25:05 +02:00
|
|
|
#if defined(CONFIG_ROUTE_IPv4_RAMROUTE) || defined(CONFIG_ROUTE_IPv6_RAMROUTE)
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
/****************************************************************************
|
|
|
|
* Public Functions
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
* Name: ramroute_ipv4_addlast/ramroute_ipv6_addlast
|
|
|
|
*
|
|
|
|
* Description:
|
|
|
|
* Remove the entry at the end of an IPv4/IPv6 routing table list
|
|
|
|
*
|
2018-03-13 16:52:27 +01:00
|
|
|
* Input Parameters:
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
* entry - A pointer to the new entry to add to the list
|
|
|
|
* list - The list to be used.
|
|
|
|
*
|
|
|
|
* Returned Value:
|
|
|
|
* None
|
|
|
|
*
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
#ifdef CONFIG_ROUTE_IPv4_RAMROUTE
|
|
|
|
void ramroute_ipv4_addlast(FAR struct net_route_ipv4_entry_s *entry,
|
|
|
|
FAR struct net_route_ipv4_queue_s *list)
|
|
|
|
{
|
|
|
|
entry->flink = NULL;
|
|
|
|
if (!list->head)
|
|
|
|
{
|
|
|
|
list->head = entry;
|
|
|
|
list->tail = entry;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
list->tail->flink = entry;
|
|
|
|
list->tail = entry;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_ROUTE_IPv6_RAMROUTE
|
|
|
|
void ramroute_ipv6_addlast(FAR struct net_route_ipv6_entry_s *entry,
|
|
|
|
FAR struct net_route_ipv6_queue_s *list)
|
|
|
|
{
|
|
|
|
entry->flink = NULL;
|
|
|
|
if (!list->head)
|
|
|
|
{
|
|
|
|
list->head = entry;
|
|
|
|
list->tail = entry;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
list->tail->flink = entry;
|
|
|
|
list->tail = entry;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
* Name: ramroute_ipv4_remfirst/ramroute_ipv6_remfirst
|
|
|
|
*
|
|
|
|
* Description:
|
|
|
|
* Add an entry to the end of an IPv4/IPv6 routing table list
|
|
|
|
*
|
2018-03-13 16:52:27 +01:00
|
|
|
* Input Parameters:
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
* entry - A pointer to the new entry to add to the list
|
|
|
|
* list - The list to be used.
|
|
|
|
*
|
|
|
|
* Returned Value:
|
|
|
|
* A pointer to the entry removed from the head of the list or NULL if the
|
|
|
|
* list was empty.
|
|
|
|
*
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
#ifdef CONFIG_ROUTE_IPv4_RAMROUTE
|
|
|
|
FAR struct net_route_ipv4_entry_s *
|
2022-05-10 06:06:44 +02:00
|
|
|
ramroute_ipv4_remfirst(FAR struct net_route_ipv4_queue_s *list)
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
{
|
|
|
|
FAR struct net_route_ipv4_entry_s *ret = list->head;
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
{
|
|
|
|
list->head = ret->flink;
|
|
|
|
if (!list->head)
|
|
|
|
{
|
|
|
|
list->tail = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret->flink = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_ROUTE_IPv6_RAMROUTE
|
|
|
|
FAR struct net_route_ipv6_entry_s *
|
2022-05-10 06:06:44 +02:00
|
|
|
ramroute_ipv6_remfirst(FAR struct net_route_ipv6_queue_s *list)
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
{
|
|
|
|
FAR struct net_route_ipv6_entry_s *ret = list->head;
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
{
|
|
|
|
list->head = ret->flink;
|
|
|
|
if (!list->head)
|
|
|
|
{
|
|
|
|
list->tail = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret->flink = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
* Name: ramroute_ipv4_remafter/ramroute_ipv6_remafter
|
|
|
|
*
|
|
|
|
* Description:
|
|
|
|
* Remove the entry in the IPv4/IPv6 routing table list after the specified
|
2018-10-30 01:00:30 +01:00
|
|
|
* entry.
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
*
|
2018-03-13 16:52:27 +01:00
|
|
|
* Input Parameters:
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
* entry - A pointer to the new entry to add to the list
|
|
|
|
* list - The list to be used.
|
|
|
|
*
|
|
|
|
* Returned Value:
|
|
|
|
* A pointer to the entry removed from the head of the list or NULL if the
|
|
|
|
* list was empty.
|
|
|
|
*
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
#ifdef CONFIG_ROUTE_IPv4_RAMROUTE
|
|
|
|
FAR struct net_route_ipv4_entry_s *
|
2022-05-10 06:06:44 +02:00
|
|
|
ramroute_ipv4_remafter(FAR struct net_route_ipv4_entry_s *entry,
|
|
|
|
FAR struct net_route_ipv4_queue_s *list)
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
{
|
|
|
|
FAR struct net_route_ipv4_entry_s *ret = entry->flink;
|
|
|
|
|
|
|
|
if (list->head && ret)
|
|
|
|
{
|
|
|
|
if (list->tail == ret)
|
|
|
|
{
|
|
|
|
list->tail = entry;
|
|
|
|
entry->flink = NULL;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
entry->flink = ret->flink;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret->flink = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_ROUTE_IPv6_RAMROUTE
|
|
|
|
FAR struct net_route_ipv6_entry_s *
|
2022-05-10 06:06:44 +02:00
|
|
|
ramroute_ipv6_remafter(FAR struct net_route_ipv6_entry_s *entry,
|
|
|
|
FAR struct net_route_ipv6_queue_s *list)
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
{
|
|
|
|
FAR struct net_route_ipv6_entry_s *ret = entry->flink;
|
|
|
|
|
|
|
|
if (list->head && ret)
|
|
|
|
{
|
|
|
|
if (list->tail == ret)
|
|
|
|
{
|
|
|
|
list->tail = entry;
|
|
|
|
entry->flink = NULL;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
entry->flink = ret->flink;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret->flink = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
2017-09-28 20:25:05 +02:00
|
|
|
|
|
|
|
#endif /* CONFIG_ROUTE_IPv4_RAMROUTE || CONFIG_ROUTE_IPv4_RAMROUTE */
|