nuttx/arch/arm/src/armv6-m/Toolchain.defs

192 lines
6.0 KiB
Plaintext
Raw Normal View History

############################################################################
# arch/arm/src/armv6-m/Toolchain.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Setup for the selected toolchain
#
# Handle old-style chip-specific toolchain names in the absence of
# a new-style toolchain specification, force the selection of a single
# toolchain and allow the selected toolchain to be overridden by a
# command-line selection.
#
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_ATOLLIC)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= ATOLLIC
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= BUILDROOT
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODEREDL)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODEREDL
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODEREDW)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODEREDW
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYL)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODESOURCERYL
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= CODESOURCERYW
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= DEVKITARM
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIL)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= GNU_EABIL
endif
ifeq ($(filter y, $(CONFIG_ARMV6M_TOOLCHAIN_GNU_EABIW)),y)
CONFIG_ARMV6M_TOOLCHAIN ?= GNU_EABIW
endif
#
# Supported toolchains
#
# TODO - It's likely that all of these toolchains now support the
# CortexM0. Since they are all GCC-based, we could almost
# certainly simplify this further.
#
# Each toolchain definition should set:
#
# CROSSDEV The GNU toolchain triple (command prefix)
# ARCROSSDEV If required, an alternative prefix used when
# invoking ar and nm.
# ARCHCPUFLAGS CPU-specific flags selecting the instruction set
# options, etc.
# MAXOPTIMIZATION The maximum optimization level that results in
# reliable code generation.
#
ifeq ($(CONFIG_DEBUG_CUSTOMOPT),y)
MAXOPTIMIZATION := $(CONFIG_DEBUG_OPTLEVEL)
endif
# Atollic toolchain under Windows
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),ATOLLIC)
CROSSDEV ?= arm-atollic-eabi-
ARCROSSDEV ?= arm-atollic-eabi-
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# NuttX buildroot under Linux or Cygwin
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),BUILDROOT)
CROSSDEV ?= arm-nuttx-eabi-
ARCROSSDEV ?= arm-nuttx-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -mfloat-abi=soft
endif
# Code Red RedSuite under Linux
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),CODEREDL)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# Code Red RedSuite under Windows
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),CODEREDW)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# CodeSourcery under Linux
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),CODESOURCERYL)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# CodeSourcery under Windows
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),CODESOURCERYW)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# devkitARM under Windows
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),DEVKITARM)
CROSSDEV ?= arm-eabi-
ARCROSSDEV ?= arm-eabi-
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# Generic GNU EABI toolchain on OS X, Linux or any typical Posix system
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),GNU_EABIL)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
ifeq ($(CONFIG_ARMV6M_TOOLCHAIN),GNU_EABIW)
CROSSDEV ?= arm-none-eabi-
ARCROSSDEV ?= arm-none-eabi-
ifneq ($(CONFIG_WINDOWS_NATIVE),y)
WINTOOL = y
endif
ARCHCPUFLAGS = -mcpu=cortex-m0 -mthumb -march=armv6-m -mfloat-abi=soft
endif
# Individual tools may limit the optimizatin level but, by default, the
# optimization level will be set to to -Os
MAXOPTIMIZATION ?= -Os