nuttx/ReleaseNotes

NuttX Release Notes
===================

This file contains are the release notes for the NuttX (and apps) packages
for every release.  The text is just as was written at the time of release
(with perhaps some corrected typos).  Over the course of time, NuttX has
used several different repositories:  CVS, two SVN repositories, and
currently a GIT repository.  Therefore, revision information specific to an
older repository may not be meaningful today.

To make it easier to track there older versions in the current GIT
repository, a GIT lightweight tag has been applied for each release.  The
tag name is the release name (for example, the release 6.27 has tag name
"nuttx-6.27").

NuttX-0.1.0
-----------

This is the initial.  This initial includes the complete NuttX RTOS
with support for the Linux user mode simulation and the TI TMS320C5471
(Arm7) processor.  Partial support for the 87C52 is included.

This release has been verified on both the Linux user-mode and C5471
platforms using the test program under examples/ostest.  Test results
for the C5471 can be found in arch/c5471/doc/test-results.txt.

This tarball contains a complete CVS snapshot from March 9,2007.

NuttX-0.1.1
-----------

This is the second release of NuttX.  This release includes the following.
See the ChangeLog for more detailed description of the changes.

(1) General OS bugfixes (see the ChangeLog for details),
(2) bugfixes for the TI TMS320C5471 (Arm7) platform (see
    the ChangeLog)
(3) Complete support for the 87C52. (However, the 87C52
    release is not stable enough for general usage).
(4) Added the beginning of a shell call NuttShell (nsh)

This release has been verified on the Linux user-mode platform, the
Spectrum Digital TMS320C5471 EVM, and the PJRC 87C52 development board
using the test program under examples/ostest.

STATUS: The development status remains as ALPHA until further testing
is performed.

This tarball contains a complete CVS snapshot from March 14, 2007.

NuttX-0.1.2
-----------

This is the third release of NuttX.  This release is
primarily a bugfix release with minimal new features.  See
the ChangeLog for a more detailed description of the
changes.

(1) Several important OS and ARM7 bugfixes,
(2) opendir(), closedir(), readdir(), etc. added
(3) Added C5471 watchdog timer.
(4) Created a shareable, serial driver.
(5) Added 'ls' command to NuttShell (nsh)
(6) Added a test of the round robin scheduler

This release has been verified on the Linux user-mode
platform, the  Spectrum Digital TMS320C5471 EVM using the
test program under examples/ostest.

This tarball contains a CVS snapshot from March 19, 2007.

NuttX-0.2.1
-----------

This is the fourth release of NuttX.  This release adds adds
support for a new platform, restructures many header files,
and adds a few new features:

(1) Support for Neuros OSD / DM320
(2) Restructuring of header files for better POSIX compliance
(3) Added kill()
(4) Added POSIX timers
(5) bugfixes and documentation updates

This release has been verified on the Linux user-mode
platform, the  Spectrum Digital TMS320C5471 EVM, and the
Neuros OSD  using the test program under examples/ostest.  Because
of the stability of these tests, the project status
has been upgraded to 'beta.'

This tarball contains a complete CVS snapshot from March 22, 2007.

NuttX-0.2.2
------------

This is the fifth release of NuttX.  There is no major new
functionality in this release.  This release adds support
for new pthread barrier APIs, changes the directory
structure, to better handle different board configurations
using the same processor architecture, and corrects a few
defects.

See the ChangeLog for a complete list of changes.

This release has been verified on the Linux user-mode
platform and the Neuros OSD using the test program under
examples/ostest.  There are no known, critical defects but
the project development status remains at 'beta' status
pending further test and evaluation.

This tarball contains a complete CVS snapshot from
March 26, 2007.

NuttX-0.2.3
------------

This is the sixth release of NuttX.  This release is
primarily a bugfix release.  Numerous problems were fixed
as detailed in the change log.  New functionality includes
support for timed message queues.

See the ChangeLog for a complete list of changes.

This release has been verified on the Linux user-mode
platform and the Neuros OSD using the test program under
examples/ostest. The results of the testing is available in
the source tree under configs/ntosd-dm320/doc/test-results.
There are no known, critical defects but the project
development status remains at 'beta' status pending further
test and evaluation.

This tarball contains a complete CVS snapshot from March 29,
2007.

NuttX-0.2.4
------------

This is the 7th release of NuttX.  This release is only to roll out
build changes to better support different SoC's that use the same
processor architecture.  In particular, the two existing ARM architectures,
c5471 and DM320 were combined into a single ARM directory.  This was done
in preparation for an LPC2148 port that is currently in progress.  There
is NO new functionality or significant bugfixes in this release.

See the ChangeLog for a complete list of changes.

This release has been verified on the Linux user-mode platform
and the Neuros OSD using the test program under examples/ostest.
The results of the testing is available in the source tree under
configs/ntosd-dm320/doc/test-results and under configs/sim/doc/test-results.
There are no known, critical defects but the project development status
remains at 'beta' status pending further test and evaluation.

This tarball contains a complete CVS snapshot from April 28, 2007.

NuttX-0.2.5
------------

This is the 8th release of NuttX.  This release includes:

(1) Several bug fixes
(2) Initial support for FAT filesystems.  Testing has not
    been exhaustive and some functionality is missing
   (mkdir, stat, unlink chmod, and rename functionality is
    not yet implemented).
(3) Support for the NXP lpc2148 processor is included but
    is untested as of this writing.  The current
    implementation includes only support for serial console
    and timer interrupt.

See the ChangeLog for a complete list of changes.

This release has been verified only on the Linux user-mode
platform.

This tarball contains a complete CVS snapshot from May 19,
2007.

NuttX-0.2.6
-----------

This is the 9th release of NuttX.  This is primarily a
bugfix release to correct a number of problems introduced
with the 0.2.5 release. This release does include some FAT
filesystem extensions including unlink(), mkdir(), rmdir(),
rename(), opendir(), closedir(), readdir(), seekdir(),
telldir(), rewindir().  There are some pending FAT changes
that did not make it into this release including stat(),
truncate(), and long file names.

See the ChangeLog for a complete list of changes.

This release has been verified only on the Linux user-mode platform.

This tarball contains a complete CVS snapshot from May 26, 2007.

NuttX-0.2.7
-----------

This is the 10th release of NuttX.  This is primarily a bugfix
release to correct a number of problems reported to me (thanks
Didier!). This release does include the final changes complete the
FAT filesystem logic including stat(), statfs(), and non-standard
APIs to manage FAT attributes.  At present, FAT long file names and
file truncate() are still not supported.

See the ChangeLog for a complete list of changes.

This release has been verified only on the Linux user-mode platform.

This tarball contains a complete CVS snapshot from June 9, 2007.

NuttX-0.2.8
-----------

This is the 11th release of NuttX.  This release:
(1) corrects important bugs in opendir() and realloc()
(2) adds support for environment variables
(3) adds several new C library interfaces
(4) extends several example programs

See the ChangeLog for a complete list of changes.

This release has been verified only on the Linux user-mode platform.

This tarball contains a complete CVS snapshot from July 2, 2007.

NuttX-0.3.0
-----------

This is the 12th release of NuttX.  This release includes the initial
integration of a network subsystem and the uIP TCP/IP stack into NuttX
(see http://www.sics.se/~adam/uip/index.php/Main_Page).  Also included
is a device driver for the Davicom DM90x0 Ethernet controller.

This integration is very preliminary.  Only a small portion of the
network functionality has been integrated and there are a number of
open issues (see the TODO file).  The network subsystem is pre-alpha
at this point in time.  I expect that it will stabilize and mature
over the next few releases.

The baseline functionality of NuttX continues to mature and remains at
post-beta (as long as the network is not used).

See the ChangeLog for a complete list of changes.

This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver.

This tarball contains a complete CVS snapshot from November 6, 2007.

NuttX-0.3.1
-----------

This is the 13th release of NuttX and the second release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).

Many network-related problems have been fixed and the implementation
has matured significantly.  However, the level of network reliability
is probably still at the pre-alpha or early level.  It is sufficiently
complete that you may begin to perform some network integration and
is expected to achieve beta level of reliability over the next few
releases.

The baseline functionality of NuttX continues to mature and remains at
post-beta (as long as the network is not used).

See the ChangeLog for a complete list of changes.

This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver.

This tarball contains a complete CVS snapshot from November 19, 2007.

NuttX-0.3.2
-----------

This is the 14th release of NuttX and the 3rd release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).

Many network-related problems have been fixed and the implementation
has matured significantly.  This release consists of:

o TCP-related bug-fixes
o TCP performance improvements
o Initial UDP integration
o Initial uIP micro webserver integration

See the ChangeLog for a complete list of changes.

The level of network reliability is at alpha level is expected to
achieve beta level of reliability over the next few releases.

The baseline functionality of NuttX continues to mature and remains at
post-beta.

This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver.

This tarball contains a complete CVS snapshot from November 23, 2007.

NuttX-0.3.3
-----------

This is the 15th release of NuttX and the 4th release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).

Many network-related problems have been fixed and the implementation
has matured significantly.  This release consists of:

o TCP-related bug-fixes for disconnecting sockets
o Correction of some TCP read-ahead logic
o TCP performance improvements
o Misc. additions and cleanup (See the ChangeLog for a complete list of
  changes).

The level of network reliability is at an early beta release level.  The
baseline functionality of NuttX continues to mature and remains at
post-beta. Open network-related issues include only:

o Some minor unimplemented BSD socket functionality,
o Thread safety issues: the same socket cannot be used concurrently on
  different threads.
o Pending design changes necessary to support multiple network interfaces.
o IPv6 support is incomplete.

This release has been verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 driver. Any feedback for improving the network
reliability/performance would be greatly appreciated.

This tarball contains a complete CVS snapshot from November 28, 2007.

NuttX-0.3.4
-----------

This is the 16th release of NuttX and the 5th release containing
the integration of a network subsystem and the uIP TCP/IP, UDP, and
ICMP stacks into NuttX (see http://www.sics.se/~adam/uip/index.php/Main_Page).

This release is primarily a bug-fix release.  New features include
only:

o TELNET front-end to NSH,
o DHCPC server functionality, and
o C5471 Ethernet driver.

Numerous network related problems were fixed related to DHCPC, UDP
input processing, UDP broadcast, send timeouts, and bad compilation when
uIP is compiled at high levels of optimization.

The level of network reliability is at a strong beta release level.  The
baseline functionality of NuttX continues to mature and remains at
post-beta or production level.

Parts of this release were verified only on the Neuros OSD (DM320 ARM9)
platform using the DM90x0 Ethernet driver and other parts on the Spectrum
Digital C5471 EVM using the C5471 Ethernet driver. Any feedback about bugs
or suggestions for improving the network reliability/performance would be
greatly appreciated.

This tarball contains a complete CVS snapshot from December 10, 2007.

NuttX-0.3.5
-----------

This is the 17th release of NuttX this release is primarily a bug-fix
release and intended to synchronize with the current CVS contents.  See
the ChangeLog for a detailed list of changes and fixes.

This release were verified only on the Spectrum Digital C5471 EVM using
the C5471 Ethernet driver. Any feedback about bugs or suggestions for
improvement would be greatly appreciated.

This tarball contains a complete CVS snapshot from December 18, 2007.

NuttX-0.3.6
-----------

This is the 18th release of NuttX.  This release contains on a few
changes.  The primary purpose of this release is to synchronize with
the release of the pascal-0.1.0 add-on package.

This release of NuttX includes the following changes:

* Fixes for use with SDCC compiler
* Added a simulated z80 target (arch/z80)
* Fix deadlock errors when using stdio but with no buffering
* Add support for the add-on Pascal P-Code interpreter (pcode/)
  (see the pascal-0.1.0 package)

This release were verified only on the simulated Z80 and and host
simulation targets.  As usual, any feedback about bugs or suggestions
for improvement would be greatly appreciated.

This tarball contains a complete CVS snapshot from January 6, 2007.

====

There was an error in the initial 0.3.6 release that prevented
a successful build unless the Pascal add-on was present.  The
tarball was patched to include the fix.  Make sure that you download
the nuttx-0.3.6.1.tar.gz version to avoid this problem.

NuttX-0.3.7
-----------

This is the 19th release of NuttX.  This release includes the
preliminary port of NuttX to the ZiLOG z16f 16-bit microcontroller.
This port was verified using the ZiLOG z16f2800100zcog Development
and the ZiLOG ZDS-II toolchain. See http://www.zilog.com for
further information.

I emphasize that this is a preliminary release of the z16f port and
is only alpha or, perhaps, pre-alpha quality as of this writing.
There are a list of known issues in the TODO file in the root of
the NuttX directory.  The overall quality of NuttX (excluding the
z16f port) continues to improve beyond the late beta level.

The z16f port required numerous changes to NuttX to handle:

* NEAR and FAR addressing, and
* Use of a Windows native toolchain in a Cygwin build environment.

In addition to the z16f port, at least one very critical bug was
found and corrected in NuttX:  The thread-specific errno value of one
task was being randomly trashed when a different thread exited.

This release were verified on the ZiLOG z16f2800100zcog, Neuros OSD
(ARM9), and the simulation platforms.  As usual, any feedback about bugs
or suggestions for improvement would be greatly appreciated.

This tarball contains a complete CVS snapshot from January 31, 2008.

NuttX-0.3.8
-----------

This is the 20th release of NuttX.  This is a minor bugfix release.
It corrects a few minor problems, adds a few minor features, and
continues the integration of the ZiLOG Z18F and of the Pascal P-Code
add-on.  This release is synchronized with the release of Pascal-0.1.2.

This tarball contains a complete CVS snapshot from February 10, 2008.

NuttX-0.3.9
-----------

This is the 21st release of NuttX.  This is a minor future enhancement
release.  This release includes support for the ZiLOG Z8Encore! micro-
controller.  Also included is the initial framework for support for
the Z80, XTRS platform (http://www.tim-mann.org/xtrs.html).

This released has been verified only on the ZiLOG ZDS-II Z8Encore!
chip simulation.

This tarball contains a complete CVS snapshot from March 9, 2008.

NuttX-0.3.10
------------

This is the 22nd release of NuttX.  This is an important bug fix
release.  This release incorporates fixes to correct critical list
handling errors in task shutdown logic: One in timer deletion logic
(timer_delete.c) and one in stream logic (lib_init.c).  This release
also includes support to ZiLOG EZ80Acclaim microcontroller (EZ80F91
chip) and configurations for the ZiLOG z8f64200100kit (Z8F6423) and
ez80f0910200kitg (EZ80F091) development kit.

NuttX-0.3.11
------------

This is the 23rd release of NuttX.  This is another important bugfix
release.  This releases fixes several bugs:

* Two POSIX timer bugs: a memory leak as well a fatal sequencing error.
* Several FAT filesystem errors.
* A deadlock that can occur in opendir()

A few new features were also added:

* Support for recursive mutexes
* Added a RAM disk block driver
* The host simulator no longer uses direct Linux system calls and
  now also works on Cygwin.
* The OS test was strengthen and now runs as an endurance test

These changes were verified only on the Host simulator under Cygwin.
Please report any errors to me.

This tarball contains a complete CVS snapshot from June 1, 2008.

NuttX-0.3.12
------------

This is the 24th release of NuttX.  This release includes some minor
bugfixes as well as a few new features.  Bugs fixed include:

* Corrected an error in recursive mutex implementation.
* task_create() was only dup()ing the first three file descriptors.
* Fixed driver open reference counting errors in dup(), dup2(), and exit().
* Fixed error handling logic in fflush().

New features were also added:

* Pipes and pipe() API
* FIFOs and mkfifo() API
* mkfatfs() API can be used to format FAT file systems.

These changes were verified only on the Host simulator under Cygwin.
Please report any errors to me.

This tarball contains a complete CVS snapshot from August 10, 2008.

NuttX-0.3.13
------------

This is the 25th release of NuttX.  This release includes some
important bugfixes as well as a few new features.  Bugs fixed
include:

* Fixed problems with Cygwin-based console input.  NSH now works
  with the Cygwin simulator.
* sched_get_priority_max/min returned error on SCHED_RR
* Corrected detection of End-of-File in fgets()
* Fixed an error in opendir() that could cause an assertion to fail
  inappropriately.
* Corrected an error in the FAT that caused files opened for writing
  with O_APPEND to fail.
* Fix error in getopt() when called with argc==1
* Fix error in stat() when used on the root directory
* Fixed a critical bug that effects the way that environment variables
  are shared among pthreads.
* uIP port now supports multi-threaded, concurrent socket access.
  So, for example, one thread can be reading from a socket while
  another is writing to the socket.

New features were also added:

* New OS APIs: chdir() and getcwd()
* The Nuttx shell (NSH) has been extended in many ways.
  - New commands: mkfatfs, mkfifo, sleep, usleep, nice, sh, cd, and pwd
  - New memory inspection commands and heap usage commands
  - New capabilities:
    - Execution of commands in background
    - Execution of simple scripts
    - Redirection of command output
    - Last command status ($?)
  - Now supports if-then[-else]-fi construct
  - Other features as noted in the ChangeLog.

These changes were verified only on the Host simulator under Cygwin
and under Linux and also on the Neuros OSD (ARM9).  Please report
any errors to me.

This tarball contains a complete CVS snapshot from September 1, 2008.

nutt-0.3.14
-----------

This is the 26th release of NuttX.  This release includes some
important bugfixes as well as a few new features.  Critical bugs
fixed include:

FAT FS:
  * Fixed several critical bugs with regard to fat reading and
    writing and FAT12 accesses.  Basically the FAT FS only worked
    with my tiny test files and test cases.  A lot of stronger FAT
    tested is still needed!
  * Fixed another FAT bug in implementation of FAT lseek();
    this prohibited correct random access to large files.

Network:
  * Corrected a critical bug that may prevent recvfrom from receiving
    packets from most remote UDP port numbers.
  * Corrected an error in multi-threaded socket handling in send() and
    sendto().  Outgoing data could overwrite incoming data.
  * Corrected IP checksum calculation in ICMP and UDP message send logic.
  * Corrected an error in send() timeout logic.

New features were also added:

Network:
  * Added support for application access to ICMP protocol stacks
  * Added ping request logic (net/uip).
  * Added basic TFTP client logic (netutils/tftpc).

NuttShell (NSH):
  * New commands: 'test', '[', 'ping', 'mkrd', 'xd', and TFTP 'get' and 'put'
    See the new NuttShell User Guide for additional information.

Other less critical bugs were also fixed and other less important
features were were added.  See the ChangeLog for details.

These changes were verified only on the Neuros OSD (ARM9).  Please
report any errors to me.

This tarball contains a complete CVS snapshot from September 8, 2008.

nutt-0.3.15
-----------

This is the 27th release of NuttX.  This release includes some new features:

* Adds support for the ROMFS filesystem
* ROMFS supports mmap() to provide eXecute In Place (XIP) capability
* NuttShell (NSH) can be configured to use ROMFS to provide a tiny read-only
  filesystem with a startup script in /etc.
* Completed the basic port of the NXP LPC2148 on the mcu123.com board.
  The basic port includes successful booting, timer interrupts,
  serial console, successfully passing the examples/ostest, and a
  NuttShell (NSH) configuration.

These changes were verified only on the mcu123.com NXP LPC2148
board.  Please report any errors to me.

This tarball contains a complete CVS snapshot from September 20, 2008.

nutt-0.3.16
-----------

This is the 28th release of NuttX.  This release includes the first
support for USB in NuttX.  A set of USB APIs were added to support
USB device controller drivers and bindings to USB device class
drivers.  The form of the interface was inspired by the Linux Gadget APIs.

At present USB device controller drivers are included for:
  * The NXP LPC214x.  This driver has been verified and is an early alpha
    stage in quality.
  * TI DM320.  Coding for this driver is complete but it is completely
    untested as of this release.

A controller-independent class driver is also included for:
  * USB serial class device driver (emulates the Prolific PL2303
    serial-to-USB adapter).  This driver has only been verified with
    the Linux host PL2303 driver.

Other new features include:
  * Add an option to set aside a separate stack for interrupt
    handling (ARM only).  This is useful when memory is constrained,
    there are multiple tasks, and the interrupt stack requirement
    is high (as when USB is enabled).

A few bugs were also fixed:
  * Fixed the frequency of system timer interrupts in the NXP LPC214x port
    (off by 20x in nuttx-0.3.15)
  * Fixed serial driver bugs related to (1) open counts and (2) recognizing
    O_NONBLOCK on read.
  * Fixed an error in read(); it was not setting the errno on errors returned
    from the driver.

These changes were verified only on the mcu123.com NXP LPC2148 board
using with a Linux host.  Please report any errors to me.

This tarball contains a complete CVS snapshot from October 10, 2008.

UPDATE
------
This release does not build for the ARM target when USB is disabled.
Here is the fix:

Index: arch/arm/src/common/up_internal.h
===================================================================
RCS file: /cvsroot/nuttx/nuttx/arch/arm/src/common/up_internal.h,v
retrieving revision 1.13
diff -u -r1.13 up_internal.h
--- arch/arm/src/common/up_internal.h   6 Oct 2008 16:20:52 -0000       1.13
+++ arch/arm/src/common/up_internal.h   13 Oct 2008 20:48:21 -0000
@@ -200,7 +200,8 @@
 extern void up_usbinitialize(void);
 extern void up_usbuninitialize(void);
 #else
-# define up_netinitialize()
+# define up_usbinitialize()
+# define up_usbuninitialize()
 #endif

 #endif /* __ASSEMBLY__ */

NuttX-0.3.17
------------

This is the 29th release of NuttX.  This release includes the
additional support for USB in NuttX.  The following new features
were added:

* Added support for SPI-based MMC/SD cards (with an SPI driver
  for the NXP LPC214x).
* Added USB storage class device side driver (BBB)
* Added an example that demonstrates the USB storage class by
  exporting the SPI based MMC/SD card on the NXP LPC214x.

This is an early alpha release of these drivers.  At present they
only work with debug features enabled so there are probably some
race conditions that occur only with debug features disabled.
(Anyone out there with a USB analyzer?  I would love to know what
is happening.)

Several important bugs were also fixed in the FAT file system, USB
serial driver and NXP LPC214x USB controller driver. (See the ChangeLog
for details.)

These changes were verified only on the mcu123.com NXP LPC2148 board
using a Linux development environment.  USB testing was performed
using both a Linux host and a WinXP host.  Please report any errors
to me.

This tarball contains a complete CVS snapshot from October 28, 2008.

NuttX-0.3.18
------------

This is the 30th release of NuttX.  This release includes two
partially completed ports, several new features, and a couple of
important bug fixes.  The two partially completed ports are:

  * The STMicro STR71x processor and configuration for the Olimex
    STR-P711 board.
  * The Hitachi SH-1 using the SH1_LCEVB1 (SH-1/US7032EVB1) board

Progress on these ports is stalled (as detailed in the ChangeLog).

The new features focus primarily on management of block devices and
extensions of the NuttShell (NSH).  These include:

  * A loop device that converts a file into a block device.
  * A block to character (BCH) driver that  allow access a block device as
    if it were character device.
  * Added strcasecmp() and strncasecmp() libc functions.
  * Added the 'dd' and 'losetup' commands to NSH. These commands
    (along with mkfatfs and mount), give good management of filesystems
    on the target.

Several bugs were fixed, the most important of which are:

  * Fixed a race condition workaround delay in LPC214X SPI logic.
    This was also the cause of some bad MMC/SD performance on that
    platform.

  * Fixed a recently introduced FAT file system problem: It would
    mount a (invalid) FAT file system even if the medium is not formatted!

  * Corrected two other important errors in the FAT lseek() implementation:
    1 - The sectors-per-cluster value was being reset to "1".
    2 - Important lseek logic was omitted when the seek position was zero.

The FAT filesystem has had many bugs fixed in it and, I think, is
now maturing and becoming stable.

These changes were verified only on the mcu123.com NXP LPC2148
board, the Hitachi SH1_LCEVB1 board, and the Linux simulator, all
using a Linux development environment.  Please report any errors
to me.

This tarball contains a complete CVS snapshot from November 16, 2008.

NuttX-0.3.19
------------

This is the 31st release of NuttX.  This release includes the
following new feature:

  * Add poll() and select() APIs that may be used to monitor for
    data availability on character devices or TCP/IP sockets.
  * Implemented support TCP/IP connection backlog.  This allows
    select() to wake-up on new connections to a listener socket.
  * Added definition of a framebuffer driver and implement framebuffer
    drivers for the simulated platform and the TI DM320 (untested
    as of the initial check-in).
  * Partially developed a graphics framework based on the framebuffer
    drivers, however, this will not be ready for use for a few more
    releases.  Currently this includes only a few color conversion
    routines and some rasterizing functions.  A tiny windowing system
    is under development but not ready for check-in yet.
  * Added support for fixed precision math.
  * Added support for outgoing multicast packets.

Several bugs were fixed, the most important of which are:

  * Fixed an important bug in the TCP/IP buffering logic.  When
    TCP/IP read-ahead is enabled and not recv() is in-place when a
    TCP/IP packet is received, the packet is placed into a read-ahead
    buffer.  However, the old contents of the read-ahead buffer
    were not being cleared and old data would contaminate the newly
    received buffer.

  * Changed the behavior of the serial driver read.  It now returns
    data as it is available rather than waiting for the full requested
    read size.  This makes functions like fgetc() work much more
    smoothly.

These changes were verified only on the Neuros OSD (ARM9) using a
Linux development environment. Please report any errors to me.

This tarball contains a complete CVS snapshot from November 26, 2008.

NuttX-0.4.0
-----------

This is the 32nd release of NuttX.  This release adds graphics
support and a tiny windowing subsystem.  That new graphics subsystem
is documented at http://nuttx.sourceforge.net/NXGraphicsSubsystem.html.
No other substantial changes were made.

These changes were verified only on the NuttX simulation platform
with X11 windows simulating a device framebuffer. Please report any
errors to me.

The version number was bumped up to 0.4.0 in part to reflect the
new graphics subsystem, but also to recognize the NuttX is approaching
complete functionality.  In the 0.3.x versions, network support was
added, Pascal P-code runtime support was added, FAT and ROMFS
filesystems were added, MMC/SD and USB device support were added.
There were also numerous extensions to the NuttShell, NuttX APIs,
and architecture ports.

This tarball contains a complete CVS snapshot from December 6, 2008.

NuttX-0.4.1
-----------

This is the 33rd release of NuttX.  This is a minor bugfix release.
The primary reason for this release is to correct numerous build
errors that have accumulated for the ZiLOG ZDS-II based targets.
All ZDS-II targets now build correctly (but have not been re-tested).
In addition to platform-specific build failures, this release also
adds the following features which were not tested as of the time
of the release:

  * Board support for the ZiLog ez80Acclaim! ez80f910200zco Development Kit
  * ZiLOG eZ80F91 EMAC driver

These changes were verified only on the NuttX simulation platform.
Please report any errors to me.

This tarball contains a complete CVS snapshot from February 6, 2009.

NuttX-0.4.2
-----------

This is the 34th release of NuttX.  This release adds no new OS
features but does include support for two new architectures:

  * ez80Acclaim!  Basic support has been integrated and verified
    for the ez80f910200zcog-d board (eZ80F91-based).  That basic
    support includes timer interrupts and serial console.  Ongoing
    work includes an EMAC driver that should be integrated for the
    next release nuttx-0.4.2.  eZ80Acclaim! support has been in the
    code base for some time, but has only just been integrated due
    to toolchain issues.

  * Renesas M16C/20.  Support for the Renesas SKP16C20 board has
    been included in the NuttX source tree.  However, as the
    eZ80Acclaim!, testing and integration of that port is stalled
    due to toolchain issues.

These changes were verified only on the ZiLOG eZ80910200zcog-d
board. Please report any errors to me.

This tarball contains a complete CVS snapshot from February 28, 2009.

NuttX-0.4.3
-----------

This is the 35th release of NuttX.  This release one important new
OS feature and corrects and extends the eZ80 port:

  * Priority Inheritance.  The basic NuttX waiting logic was extended
    to support priority inheritance. See the NuttX User Manual for
    further information:
    http://www.nuttx.org/NuttxUserGuide.html#priorityinheritance.

  * ez80Acclaim! Corrected several critical, show-stopping bugs on that
    platform including:
    - Errors in the serial driver interrupts.
    - An error in the eZ80 table.
  * eZ80Acclaim!: Completed integration of the eZ80F91 EMAC driver.

These changes were verified only on the ZiLOG eZ80910200zcog-d board
and on Cygwin-based simulation platform in various configurations.
Please report any errors to me.

This tarball contains a complete CVS snapshot from March 13, 2009.

NuttX-0.4.4
-----------

This is the 36th release of NuttX.  This release focuses on bugfixes
and extending and verifying certain networking features.

  * Important bugs were fixed in NSH, UDP checksum calculation, UDP
    bind() behavior for port==0, the eZ80Acclaim! EMAC driver, Z80
    interrupt handling, and in the C libraries.

  * Testing was extended to further verify the tiny webserver,
    DHCPD, wget(), and sendmail.

See the Changelog for a detailed description of these changes.

These changes were verified only on the ZiLOG eZ80910200zcog-d board
using the ZDS-II toolchain in Cygwin-based environment. Please
report any errors to me.

This tarball contains a complete CVS snapshot from March 29, 2009.

NuttX-0.4.5
-----------

This is the 37th release of NuttX.  This release focuses on a few new features.

  * The basic port for the Freescale ARM920T i.MX1 processor on the
    Freescale MX1ADS board.  Coding is complete for this port, but
    it is has not yet fully integrated
  * Extended I2C and SPI interface definitions
  * Add basic support for C++ applications.  Very simple C++
    applications can now be built against NuttX without any external
    libraries.  At present, only the most primitive C++ programs
    are supported, but it is hoped that this support will be extended
    in future releases.

See the Changelog for a detailed description of these changes.

This tarball contains a complete CVS snapshot from April 19, 2009.

NuttX-0.4.6
-----------

This is the 38th release of NuttX.  The release features support
for the Micromint Eagle-100 development board.  This board is based
around, the Luminary LM3S6918 MCU.  This is the first ARM Cortex-M3
architecture supported by Nuttx. This initial, basic port includes
timer and serial console with configurations to execute the NuttX
OS test and to run the NuttShell (NSH). Work is still underway on
this port and current plans are to have I2C, SSI, MMC/SD, and and
Ethernet driver in the 0.4.7 release.

Additional work was done on the MXADS i.MX1 port, however, that
work has been set aside until I complete work on the Eagle-100 (I
also need to come up with a 3V power supply).

Other changes in this release include: Extensions to the SPI interface
definition in order to handle 9-bit interfaces to displays.  Several
bugs were fixed (see the ChangeLog for a complete list of changes).

This tarball contains a complete CVS snapshot from May 19, 2009.

NuttX-0.4.7
-----------

This is the 39th release of NuttX.  This release focuses on cleaning
up and extending the Eagle100/LM3S6918 port released in nuttx-0.4.6
and on improved MMC/SD support.  New features include:

  * Improved reliably and additional drivers for the Eagle-100 board
    (LM3S6918 ARM Cortex-M3).  Additional drivers include Ethernet,
    SSI, and support for the on-board LEDs and microSD cards.

  * The SPI-based MMC/SD driver was extended to support SDHC Version
    2.xx cards.

In addition, this release includes several important bugfixes for
the LM3S6918, the LPC2148, the SPI-based MMC/SD driver, and to
FAT32.  See the ChangeLog for details of these bugfixes.

This tarball contains a complete CVS snapshot from May 29, 2009.

NuttX-0.4.8
-----------

This is the 40th release of NuttX.  This release adds:

  * Support for the Olimex STRP711 board.  That board is based on
    the STMicro STR711 MCU (ARM7TDMI). Integration is complete on
    the basic port (boot logic, system time, serial console). Two
    configurations have been verified: (1) The board boots and
    passes the OS test with console output visible on UART0, and
    the NuttShell (NSH) is fully functional with interrupt driven
    serial console.  An SPI driver is available but untested (because
    the Olimex card slot appears to accept only MMC cards; I have
    only SD cards).  Additional needed: USB and driver, MMC
    integration.

  * Support for the CodeSourcery and devkitARM Windows-native GNU
    toolchains.  Makefiles have been modified for the LM3S6918,
    LPC2148, and STR711 to support these toolchains under Cygwin.

This tarball contains a complete CVS snapshot from June 13, 2009.

NuttX-0.4.9
-----------

This is the 41st release of NuttX.  This release adds:

  * Support for a new binary format call NXFLAT that can be used to
    execute separately linked programs in place in a file system.
    See http://www.nuttx.org/NuttXNxFlat.html.

  * Several important bugs were files related to networking and ROMFS.
    See the ChangeLog for a complete list.

This tarball contains a complete CVS snapshot from June 26, 2009.

NuttX-0.4.10
-----------

This is the 42nd release of NuttX.  This released focused on the
port of Jeff Poskanzer's THTTPD HTTP server (see
http://acme.com/software/thttpd/).  As of the 0.4.10 release, that
port is still not fully complete and functional.  However, numerous
related bug-fixes and functional additions for THTTPD were added:

  * Several new standard C-library functions (fileno, strstr,
    strpbrk, fcntl).
  * Improved and extended timing APIs (mktime, gmtime, gmtime_r,
    gettimeofday, localtime, localtime_r, and strftime)
  * Networking enhancements: recvfrom() and accept() now work with
    non-blocking sockets.
  * NXFLAT extensions (exec)
  * Pattern matching logic.
  * And miscellaneous bug fixes (see the ChangeLog for details).

This tarball contains a complete CVS snapshot from August 8, 2009.

NuttX-0.4.11
------------

This is the 43rd release of NuttX. This release of NuttX incorporates
the verified port of Jeff Poskanzer's THTTPD HTTP server (see
http://acme.com/software/thttpd/).  Many of the key features of
THTTPD have been tested on the Micromint Eagle-100 development board
(Cortex-M3).  These tests verify:

  * Serving of files from any file system
  * Execution of CGI executable.  This release supports execution
    of NXFLAT executables on a ROMFS file system
    (http://www.nuttx.org/NuttXNxFlat.html)

A standard CGI interface is used:  Information is pasted to the CGI
program via POST commands and via environment variables.  CGI socket
I/O is redirected to stdin and stdout so that the CGI program only
need to printf() to send its content back to the HTTP client.

Another value to this THTTPD integration effort has been that THTTPD
has provided a very good test bed for finding NuttX networking bugs.
Several very critical networking bugs have been fixed with this
0.4.11 release (see the ChangeLog for details).  Networking throughput
has also been greatly improved.  Anyone using NuttX networking
should consider upgrading to this release.

This tarball contains a complete CVS snapshot from September 16, 2009

NuttX-0.4.12
------------

This is the 44th release of NuttX.  This release adds basic support
for the STMicro STM32, Cortex-M3 MCU.  The specific port is to the
STMicro STM3210E-EVAL development board based around the STM32F103ZET6
MCU.  Some highlights of this port:

  * This basic port includes boot-up logic, interrupt driven serial
    console, and system timer interrupts.
  * Includes a basic STMicro RIDE7 project that can be used to
    perform basic STM32 board bring-up (due to RIDE7 size limitations,
    it cannot be used for the full NuttX bring-up).
  * Working, Tested Configurations: the NuttX OS test and the
    NuttShell (NSH) example.

This basic STM32 port will be extended in the 0.4.13 NuttX release.
Functionality needed for complete STM32 support includes:  USB
device driver, LCD driver and NX bringup on the development board's
display and MicroSD support.  An SPI driver and a DMA support was
included in this 0.4.12 release, but is not yet tested.

This tarball contains a complete CVS snapshot from October 17, 2009

NuttX-0.4.13
------------

This is the 45th release of NuttX.  The release extends the support
for the STMicro STM32 microcontroller.  Minimal support for the
STM3210E-EVAL development board based around the STM32F103ZET6 MCU
was released in NuttX-0.4.12.  This release adds:

  * A simple interface definition to support some FLASH, EEPROM,
    NVRAM, etc. devices.
  * Verified SPI operation using driver for SPI based FLASH parts
    M25P64 and M25P128.
  * Improved Cortex-M3 context switching.  This should improve
    context switching performance be 2x in certain cases.
  * Added a USB device-side driver for the STM32.  This is an early
    release of a very complex driver; some bugs are expected.
  * The USB driver has been verified against the USB serial device
    class driver.  There is at least one known outstanding issue
    (see the full bug description in the TODO list).

This release also corrects some important bugs in the early STM32 release:

  * Fixed several errors the prevented operation of NuttX on an
    STM32 development board using USART2 as the serial console.
  * Fixed and optimization-dependent race condition in the clock
    initialization.
  * Fixed a critical bug in the interrupt control logic that could
    cause interrupt operations to failed used for interrupts in a
    certain range.

This tarball contains a complete CVS snapshot from November 4, 2009

NuttX-4.14
----------

This is the 46th release of NuttX.  The release extends the support
for the STMicro STM32 microcontroller.  Minimal support for the
STM3210E-EVAL development board based around the STM32F103ZET6 MCU
was released in NuttX-0.4.12 and extended in Nuttx-0.4.13 to include
initial USB support.  This completes the STM32F103ZET6 and adds:

New Generic RTOS Features:

  * Added generic support that can be included in any block driver
    to provide read-ahead buffering and write buffering for improved
    driver performance.
  * Added a generic worker thread that can used to defer processing
    from an interrupt to a task.
  * Defined a generic SD/SDIO interface can can be bound to a MMC/SD
    or SDIO driver to provide SDIO support.
  * Implemented a an SDIO-based MMC/SD driver using this new SDIO
    interface.

New STM32 Features:

  * Add support to configure an STM32 input GPIO to generate an
    EXTI interrupt.
  * Added support for buttons on the STM3210E-EVAL board.
  * Implemented an STM32 version of the common the SDIO interface.
  * Added a configuration to exercise the STM32 with the USB mass
    storage device class example.

This release also corrects some important bugs in the early STM32 release:

  * Correct error handling in the mount() logic.
  * Fixed several STM32 DMA-related issues. Integrated and debugged
    STM32 DMA functionality that was added in 0.4.12.
  * Fixed several bugs in the STM32 USB device-side driver.

NOTE:  This version, 4.14, is equivalent to what would have been
called 0.4.14 to follow 0.4.13.  The zero has been eliminated from
the front of the version number to avoid confusion about the state
of development:  Some have interpreted the leading zero to mean
that the code is in some way unstable.  That was not the intent.
Beginning in January 2010, I will switch to the 2010.nn versioning
as many others have done to avoid such confusion.

This tarball contains a complete CVS snapshot from December 2, 2009

NuttX-5.0
---------

This is 47th release of NuttX and the successor to nuttx-4.14.  This
major revision number has been incremented to indicate that an
incompatibility with previous nuttx releases has been introduced.
This version adopts standard fixed width integer names as specified
by the ANSI C99 standard.  The core logic of NuttX is older than
that standard and did not conform to it.

If you have applications running on NuttX-4.14, those applications
should continue to build and execute without problem on NuttX-5.0.
However, if you have device drivers or other OS-internal logic, you
will probably have to make some minor changes to your code to use
this version.  Below is a summary of those changes:

  * If you include sys/types.h to get the non-standard, fixed width
    integer types (uint32, uint16, ubyte, etc.), that is no longer
    necessary.
  * Instead, you will need to include stdint.h where the new fixed
    width integer types are defined (uint32_t, uint16_t, uint8_t, etc).
  * You will have to change all occurrences of the following types:

    uint32 -> uint32_t
    uint16 -> uint16_t
    ubyte  -> uint8_t
    uint8  -> uint8_t
    sint32 -> int32_t
    sint16 -> int16_t
    sint8  -> int8_t

 * In addition, the non-standard type 'boolean' must replaced with
   the standard type 'bool'.  The type definition for 'bool' is in
   stdbool.h

This change in typing caused small changes to many, many files.  It
was verified that all configurations in the release still build
correctly (other than the SDCC-based configurations).  Regression
testing was performed on a few configurations, but it is possible
that minor build issues still exist. (If you encounter any, please
let me know and I will help you to fix them.)

In the course of the regression testing, several important bugs
unrelated to the type changes were found and corrected.

  * Fixed an important error in the RX FIFO handling logic of the
    LM3S6918 Ethernet driver.
  * Corrected the handling of TCP sequence numbers in the TCP stack.
  * And other less important bugs as detailed in the ChangeLog.

The primary focus of this release was standards compatibility, but
a few new features were added including a (1) Flash Translation
Layer (FTL) that will support filesystems on a FLASH device and (2)
partial ports for the STM32F107VC and HCS12 C9S12NE64 MCUs.  Those
ports are very incomplete as of this writing.

This tarball contains a complete CVS snapshot from December 21, 2009

NuttX-5.1
---------

This is the 48th release of NuttX.  This release adds support for
two new MCU architectures in various states of development:

* AT91SAM3U (http://www.atmel.com/products/at91/sam3landing.asp?family_id=605)

  This release adds support for the SAM3U-EK development board with
  the AT91SAM3U4E MCU
  (http://www.atmel.com/dyn/products/product_card_mcu.asp?part_id=4562).
  As with most NuttX architecture releases, the release will be
  rolled out in two parts:  A basic port and an extended port.

  NuttX-5.1 includes the basic port for the SAM3U-EK board.  This
  release passes the NuttX OS test and is proven to have a valid
  OS implementation.  It supports the basic boot-up, serial console
  and timer interrupts.  A configuration to support the NuttShell
  is also included.

  The extended port will also include support for SDIO-based SD
  cards and USB device (and possible LCD support).  These extensions
  may or may not happen by the Nuttx 5.2 release as my plate is
  kind of full now.

* LPC3131 (http://ics.nxp.com/products/lpc3000/lpc313x.lpc314x.lpc315x/)

  This release also adds the complete implementation of the basic
  port for the NXP LPC3131 MCU on the Embedded Artists EA3131 board
  (http://www.embeddedartists.com/products/kits/lpc3131_kit.php).
  That port, unfortunately has stalled due to tools issues.  Those
  tool issues have been resolved and I am confident that the verified
  basic port will be available in NuttX-5.2.

  The extended release will follow and should include SDIO-based
  SD card support and device USB.

A few additional features and bugfixes of a minor nature were also
incorporated as detailed in the ChangeLog.

NuttX-5.2
---------

This is the 49th release of NuttX.  This release completes the
verification of the basic port for the NXP LPC3131 MCU on the
Embedded Artists EA3131 board
(http://www.embeddedartists.com/products/kits/lpc3131_kit.php).
This basic port includes basic boot-up, serial console, and timer
interrupts.  This port has been verified on the using the NuttX OS
test and includes a working implementation of the NuttShell (NSH).

An extended release will follow and should include SDIO-based SD
card support and device USB.

NuttX-5.3
---------

This is the 50th release of NuttX.  This release support for one new
architecture:

  * A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378
    development board was contributed by Rommel Marcelo.

And extensions to two existing architectures:

  * David Hewson contributed a dual-speed (full/high) USB device-side
    driver for the NXP LPC3131 on the Embedded Artists EA3131
    development board.

  * A DMA driver and a high speed MCI driver for the Atmel AT91SAM3U
    are included (but not fully tested in this release).

Two important bugfix was also included:

  * An important fix to the USB mass storage driver was contributed
    by David Hewson.
  * A serious error in the AT91SAM3U PIO handling was fixed.

NuttX-5.4
---------

This is the 51st release of NuttX.  This release includes one new,
important extension to th NX graphics system (See
http://www.nuttx.org/NXGraphicsSubsystem.html).

NX was develop a couple years back on hardware that supported only
framebuffer devices, that is, video hardware with video memory
directly converts the memory content to video.  However, most MCUs
that NuttX focuses on do not support such video memory; rather,
that typically only support LCDs via parallel or serial interfaces.

This release of NuttX extends NX so that now renders directly to
the LCD device via its serial or parallel interface.  No in-memory
copy of the screen memory need be maintained so this solution should
also work in MCUs with very limited SRAM.

This initial release of this feature includes the verified NX
extensions plus a driver for the HX8347, 16-bit parallel LCD.  This
LCD supports 16-bit RGB (5:6:5).

NuttX-5.5
---------

This is the 52nd release of NuttX.  This release includes one new
port, some new drivers and some important bugfixes:

  * NuttX was ported to the Luminary/TI LM3S6965 Ethernet Evaluation
    Kit.  At present, that port includes an OS test configuration
    and a NuttShell (NSH) configuration with Telnet support.

    MMC/SD and Networking support are provided but not thoroughly
    verified in this release: Current development efforts are focused
    on porting the NuttX window system (NX) to work with the
    Evaluation Kits OLED display.

  * A NuttX Ethernet driver for the Microchip ENC28J60 SPI Ethernet
    chip is available in the source tree (but has not yet been fully
    verified because I haven't properly connected it to hardware
    yet).

  * The Olimex STR-P711 NuttX port was extended to support the
    ENC28J60 and some new networking configurations were added.
    The ENC28J60 has not been tested on the STR-P711, however,
    because of hardware issues (I don't think the USB powered board
    provides enough power for the ENC28J60 and I don't have the
    right wall wart yet).

    Along the way, external interrupt support (XTI) was added to
    the STMicro STR-P711 port and some important bugs were fixed
    in the STR-P711 SPI driver.

  * Added (optional) floating point support for printf().
    (Contributed by Yolande Cates.)

  * Corrected an important UDP reference counting error.  It was
    not a serious error, but it trigger an assertion was IS a serious
    error.

NuttX-5.6
---------

This is the 53rd release of NuttX.  This release includes one several
new drivers for existing NuttX ports:

  * This port adds support for the RiT displays P14201 4-bpp,
    greyscale OLED.  4-bpp greyscale support was integrated into
    the NX graphics sub-system and verified using the TI/Luminary
    LP3S6965 Ethernet Evaluation Kit.

  * The M25Px driver was extended for the M24P1 FLASH part (see NOTE).

  * An I2C driver and (basic) SPI driver were added for the NXP
    LPC313x port.  The I2C interface definition was extended to
    efficiently handle multiple I2C transfers.
    (Contributed by David Hewson.)

As well as a few, important USB-related bugfixes (See the ChangeLog
for details).

This release also includes the beginnings of a port for the NXP
LPC1768 MCU.  However, it is too early for that port to be useful
(stay tuned for a future announce of the availability of the LPC1768
port).

NuttX-5.7
---------

This is the 54th release of NuttX.  This release adds basic support
for one new ARM Cortex-M3 architecture:

  * Added support for NXP LPC1768 MCU as provided on the Nucleus
    2G board from 2G Engineering (http://www.2g-eng.com).
  * Some initial files for the LPC17xx family were released in NuttX
    5.6, but the first functional release for the NXP LPC1768/Nucleus2G
    occurred with NuttX 5.7.
  * That initial basic release included timer interrupts and a
    serial console and was verified using the NuttX OS test.
  * That release includes a verified NuttShell (NSH) configuration
    (see the http://www.nuttx.org/NuttShell.html).
  * Also included are unverified SPI and USB device drivers.

Further efforts include:
  (1) development of a DMA support library
  (2) SPI-based MMC/SD support
  (3) verification of the USB driver

Watch for announcement of the completed LPC1768 port expected in
NuttX-5.8.

NuttX-5.8
---------

This is the 55th release of NuttX.  This includes several important
bugfixes:

  * Corrects some interrupt vectoring for the TI/Stellarix LM3S
    port
  * Correct initialization logic for NXP LPC17xxx NuttX ports:
    Power was not being provided to the GPIO module!
  * Corrected (but did not verify) implementation of the optional
    interrupt stack feature (all Cortex M3 architectures).
  * Correct a HardFault in the LPC17xx SSP driver.

Additional minor fixes are also included as detailed in the ChangeLog.

Several new features have been fully developed and included in this
release, but full verification of most of these new features has
been blocked for a variety of issues:

  * Added microSD support for the NuttShell (NSH) configuration in
    the Nucleus2G LPC1768 port.  For reasons that have not yet been
    determined, I have not successfully accessed the microSD card
    as of this writing.
  * Two USB configurations were also added for the Nucleus2G board:
    One to support the USB serial device and one for the USB mass
    storage device.  Some testing of the USB driver was performed,
    but full verification is stalled for an OTG style USB cable.
  * LEDs now work correctly on the Nucleus2G LPC1768 board.
  * The NuttX/uIP networking subsystem now supports IGMPv2 client.
    IGMP (Internet Group Multicast Protocol) network "appliances"
    to join into multicast groups.  Outbound traffic to enter and
    leave multicast groups has been verified, but full verification
    will require a switch capable of multicast.  Issues associated
    with the receipt of multicast packets are likely.

NuttX-5.9
---------

This is the 56th release of NuttX.  This release is difficult to
categorize; NuttX-5.9 was really released because there were too
many changes accumulating in CVS -- a few important, some unfinished
implementations, and a couple of important bugfixes.

  * By far biggest change in this release is the complete implementation
    of on-demand paging support.  This feature will allow you to
    execute large programs on a mass storage device (such as SPI
    FLASH) in a small RAM.  All of the core on-demand paging logic
    was completed (see http://www.nuttx.org/NuttXDemandPaging.html)
    and support was implemented for the ARM-9 family.  A test
    configuration is in place for the NXP LPC3131.  It has been
    verified that this new logic does not interfere with normal
    fixed-page ARM9 operation, but otherwise this new on-demand
    paging feature is untested.
  * Add support for the CodeSourcery toolchain to the Olimex-lpc2378
    port and for the Neuros OSD port.
  * The Neuros OSD port has been updated to work with the production
    v1.0 OSD (previously it only worked with the development board).
  * And some miscellaneous feature enhancements as detailed in the
    ChangeLog.

This includes several important bugfixes:

  * NXP LPC17xx - Fixed a critical bug in the GPIO configuration
    logic: When attempting to set no pull-up or pull-down (floating),
    it would, instead, select pull-down.

  * TI/Luminary LM3Sxxxx - Fixed:
    (1) A logic error in an address table lookup.
    (2) GPIO port encoding the limited support to only 8 GPIO ports.

  * Corrected the lease time in the DHCPC implementation:  It was
    not in host byte order.

  * And several other less important bugs as documented in the
    ChangeLog: Warnings, cornercase compilation problems, etc.

NuttX-5.10
----------

This is the 57th release of NuttX.  This release includes a combination
of some new features as well as several bugfixes.  New features
include:

  * TI/Luminary Stellaris LM3S9B96:
    Header file changes contributed by Tiago Maluta.
  * TI/Luminary Stellaris LM3S8962:
    Header file changes and support for the Stellaris LM3S8962
    Ethernet+CAN Evaluation Board contributed by Larry Arnold.
  * On-Demand Paging Support:
    The basic logic for the On-Demand Paging feature is complete,
    implemented for the NXP LPC3131, and partially tested.  See
    http://www.nuttx.org/NuttXDemandPaging.html.  Some additional
    test infrastructure will be needed in order to complete the
    verification.  See configs/ea3131/README.txt for details.
  * Two Pass Build Support:
    The make system now supports a two pass build where a relocatable,
    partially linked object is created on the first pass and that
    object is linked with the NuttX libraries to produce the final
    executable on the second pass.  This two pass build is currently
    only used to support the On-Demand paging feature:  The first
    pass link forces critical logic into the locked text region;
    the second pass builds the NuttX executable more-or-less as
    normal.
  * CONFIG_APP_DIR:
    Generalized the way in which applications are built and linked
    with NuttX.  The new configuration CONFIG_APP_DIR replaces
    CONFIG_EXAMPLE.  CONFIG_EXAMPLE used to identify the sub-directory
    within the NuttX examples/ directory that held the example
    application to be built.  That made it awkward to configure to
    build an application that resides outside of the NuttX examples/
    directory.  CONFIG_APP_DIR is more general; it can be used to
    refer to any directory containing the application to be built.

    For people who have their own configurations and/or Makefiles,
    you will need to make a couple of changes:

      - Replace all occurrences of CONFIG_EXAMPLE=foobar with
    CONFIG_APP_DIR=examples/foobar in all of the configuration
    files.
      - Replace any occurrences of examples/$(CONFIG_EXAMPLE) with
    $(CONFIG_APP_DIR)
      - Replace any occurrences of lib$(CONFIG_EXAMPLE)$(LIBEXT)
        with libapp$(LIBEXT) in your Makefiles.
      - Check any other occurrences of CONFIG_EXAMPLE.

  * Several bugfixes are included as well as code changes to eliminate
    some warnings.  See the ChangeLog for details.

NuttX-5.11
----------

This is the 58th release of NuttX.  This is a bugfix release.

  * One very important bug fixes a race condition that can occur
    using semaphores that can be awakened by signals.  Under this
    particular race condition, a task could hang waiting for a
    semaphore.
  * Corrections to lm3s8962 port contributed by Larry Arnold.  That
    port is purported to work correctly with these changes in place.

Plus less critical bugfixes as detailed in the ChangeLog.  New features
include:

  * A new configuration to support the mbed.org LPC1768 board.
    (Contributed by Dave Marples.)
  * A driver for the Atmel AT45DB161D 4Mbit SPI FLASH part

NuttX-5.12
----------

This is the 59th release of NuttX.  This is a critical bugfix release.

  * Fixed an important error in the signal trampoline logic.
    Essentially, interrupts are re-enabled while the signal handler
    executes, but the logic to re-disable the interrupts before
    returning from the signal handler trampoline was missing.  Under
    certain circumstances, this can cause stack corruption.  This
    was discovered by David Hewson on an ARM9 platform, but since
    the code has been leveraged, the bug has been propagated from
    ARM to Cortex-M3, AVR32, M16C, SH1, ZNEO, eZ80, Z8, and Z80 --
    almost every architecture. The correction has been incorporated
    for all architectures but only verified on a few.

Other notable changes in NuttX-5.12:

  * A complete port for the AVR32 (AT32UC3B0256) is incorporated
    in the source tree.  Testing of this port is underway now.  This
    release was made before verifying this port in order to get the
    important bugfix in place.

  * Other miscellaneous bugfix and enhancements as noted in the
    ChangeLog.

NuttX-5.13
----------

This is the 60th release of NuttX.  Headlines for this release
include:

  * AVR32, www.mcuzone.com AVR32DEV1

    The port for the www.mcuzone.com AVRDEV1 board based on the
    Atmel AT32UC3B0256 MCU was (almost) fully integrated. The port
    now successfully passes the NuttX OS test (examples/ostest).
    A NuttShell (NSH) configuration is in place (see the NSH User
    Guide at http://www.nuttx.org/NuttShell.html). Testing of that
    NSH configuration, however, has been postponed (because it got
    bumped by the Olimex LPC1766-STK port -- see below)

    Current Status: I think I have a hardware problem with my serial
    port setup. There is a good chance that the NSH port is complete
    and functional, but I am not yet able to demonstrate that. At
    present, I get nothing coming in the serial RXD line (probably
    because the pins are configured wrong or I have the MAX232
    connected wrong).

    A complete port will include drivers for additional AVR32 UC3
    devices -- like SPI and USB --- and will be available in a
    later release, time permitting.

  * LPC1766, Olimex LPC1766-STK

    Support for the Olimex-LPC1766 is newly added to NuttX and is
    still undergoing development, test, and integration. Verified
    configurations for the NuttX OS test and for the NuttShell (NSH,
    see the NSH User Guide at http://www.nuttx.org/NuttShell.html.
    Additional USB configurations are in the release as well, but
    they have not yet been verified.  Goals for NuttX-5.14 include:
    (1) An Ethernet driver, (2) Verified USB support, and (3) SD
    card support.

  * Additional changes and bugfixes as detailed in the ChangeLog.

NuttX-5.14
----------

The 61st release of NuttX, NuttX-5.14, was made on November 27,
2010.  This release includes multiple, important bugfixes as well
as a new driver for the NXP LPC1766.

This release corresponds with SVN release number: r3137

Important bugfixes include:

  * Cortex-M3 Hard Fault.  Fixed a hard fault problem that can occur
    if certain types of interrupts are pending at the time another
    interrupt returns. This problem has only been observed on the
    LPC1766 (returning from a SYSTICK interrupt with a pending
    Ethernet interrupt).  However, it is assumed that all Cortex-M3
    ports could have this as a latent bug.

  * TCP/IP Sequence Number Bug.  Corrected errors some important
    logic in the way that sequence numbers are managed when send()
    sends out packets before a previous packet has been acknowledged.
    Some of that send() logic was incompatible with logic in the
    uIP layer.  Errors seen include: (1) The final final packet in
    a sequence of packets might be too large!  In the THTTPD example,
    this might leave some garbage at the bottom of the display. Or
    (2) send() might hang with outstanding, unacknowledged data
    (and with no re-transmission requests).  This was due to
    differences in sequence number handling in send() and in
    uip_tcpinput.c; uip_tcpinput.c thought (incorrectly) that all
    of the bytes were acknowledged; send.c knew that they were not.

  * One-Shot POSIX Timer Bug. Fixed an error in set-up of a one-shot
    POSIX timer.  It was using the repetitive timer value (which
    is zero in the one-shot case), always resulting in a 10Ms timer!
    Found and fixed by Wilton Tong.

Additional support has been included for the Olimex-LPC1766.  Support
for that board was added to NuttX 5.13.  This release extends that
support with an Ethernet driver.  Verified configurations are now
available for the NuttX OS test, for the NuttShell (NSH, see
http://www.nuttx.org/NuttShell.html), for the NuttX network test,
and for the THTTPD webserver. (Additional USB configurations are
in the release as well, but those have not yet been verified.  Goals
for NuttX-5.15 (and beyond) include: (1) Verified USB support, (2)
SD card support, and (3) LCD support.

NuttX-5.15
----------

The 62nd release of NuttX, NuttX-5.15, was made on December 12,
2010.  This release includes several bugfixes as well as feature
enhancements, primarily for the Olimex LPC1766-STK board.

Important bugfixes included:

  * Additional fixes needed with the TCP sequence number problem
    "fixed" in NuttX-5.14.
  * In the send() logic, now checks if the destination IP address
    is in the ARP table before sending the packet; an ARP request
    will go out instead.  This improves behavior, for example, on
    the first on the first GET request from a browser
  * All USB class drivers need to call DEV_CONNECT() when they are
    ready to be enumerated.  That is, (1) initially when bound to
    the USB driver, and (2) after a USB reset.
  * The SPI_SETBITS macro was calling the SPI setmode method.
  * And several other bug fixes of lower importance (see the
    ChangeLog for details).

And feature enhancements:

  * The LPC176x Ethernet driver was using all of AHB SRAM Bank0 for
    Ethernet packet buffers (16K).  An option was added to limit
    the amount of SRAM used for packet buffering and to re-use any
    extra Bank0 memory for heap.

  * Enabled networking and SD/MMC card support in the Olimex
    LPC1766-STK NuttShell (NSH) configuration.

  * The LPC176x USB driver is now fully fully functional.
  * Added an optional cmddata() method to the SPI interface.  Some
    devices require an additional out-of-band bit to specify if the
    next word sent to the device is a command or data. The cmddata
    method provides selection of command or data.

  * A driver for the Nokia 6100 LCD (with either the Phillips PCF8833
    LCD controller and for the Epson S1D15G10 LCD controller) and
    an NX graphics configuration for the Olimex LPC1766-STK have
    been added.  However, neither the LCD driver nor the NX
    configuration have been verified as of the this release.

NuttX-5.16
----------

The 63rd release of NuttX, Version 5.16, was made on January 10,
2010 and is available for download from the SourceForge website.
This release includes initial support for USB host in NuttX. The
USB host infrastructure is new to NuttX. This initial USB host release
is probably only beta quality; it is expected the some bugs remain
in the logic and that the functionality requires extension.

Below is a summary of the NuttX USB host implementation as extracted
from the NuttX Porting Guide:

  6.3.9 USB Host-Side Drivers
  * include/nuttx/usb/usbhost.h. All structures and APIs needed to
    work with USB host-side drivers are provided in this header
    file.
  * struct usbhost_driver_s. Each USB host controller driver must
    implement an instance of struct usbhost_driver_s. This structure
    is defined in include/nuttx/usb/usbhost.h.  Examples:
    arch/arm/src/lpc17xx/lpc17_usbhost.c.
  * struct usbhost_class_s. Each USB host class driver must implement
    an instance of struct usbhost_class_s. This structure is also
    defined in include/nuttx/usb/usbhost.h.  Examples:
    drivers/usbhost/usbhost_storage.c
  * USB Host Class Driver Registry. The NuttX USB host infrastructure
    includes a registry. During its initialization, each USB host
    class driver must call the interface, usbhost_registerclass()
    in order add its interface to the registry. Later, when a USB
    device is connected, the USB host controller will look up the
    USB host class driver that is needed to support the connected
    device in this registry.  Examples: drivers/usbhost/usbhost_registry.c,
    drivers/usbhost/usbhost_registerclass.c, and
    drivers/usbhost/usbhost_findclass.c,
  * Detection and Enumeration of Connected Devices. Each USB host
    device controller supports two methods that are used to detect
    and enumeration newly connected devices (and also detect
    disconnected devices):
    + int (*wait)(FAR struct usbhost_driver_s *drvr, bool connected);
      Wait for a device to be connected or disconnected.
    + int (*enumerate)(FAR struct usbhost_driver_s *drvr);
      Enumerate the connected device. As part of this enumeration
      process, the driver will (1) get the device's configuration
      descriptor, (2) extract the class ID info from the configuration
      descriptor, (3) call usbhost_findclass() to find the class
      that supports this device, (4) call the create() method on
      the struct usbhost_registry_s interface to get a class instance,
      and finally (5) call the connect() method of the struct
      usbhost_class_s interface. After that, the class is in charge
      of the sequence of operations.
  * Binding USB Host-Side Drivers. USB host-side controller drivers
    are not normally directly accessed by user code, but are usually
    bound to another, higher level USB host class driver. The class
    driver exports the standard NuttX device interface so that the
    connected USB device can be accessed just as with other, similar,
    on-board devices. For example, the USB host mass storage class
    driver (drivers/usbhost/usbhost_storage.c) will register a
    standard, NuttX block driver interface (like /dev/sda) that can
    be used to mount a file system just as with any other other
    block driver instance. In general, the binding sequence is:

    1. Each USB host class driver includes an initialization entry
       point that is called from the application at initialization
       time.  This driver calls usbhost_registerclass() during this
       initialization in order to makes itself available in the
       event that the device that it supports is connected.  Examples:
       The function usbhost_storageinit() in the file
       drivers/usbhost/usbhost_storage.c
    2. Each application must include a waiter thread thread that
       (1) calls the USB host controller driver's wait() to detect
       the connection of a device, and then (2) call the USB host
       controller driver's enumerate method to bind the registered
       USB host class driver to the USB host controller driver.
       Examples: The function nsh_waiter() in the file
       configs/nucleus2g/src/up_nsh.c and the function nsh_waiter()
       in the file configs/olimex-lpc1766stk/src/up_nsh.c.
    3. As part of its operation during the binding operation, the
       USB host class driver will register an instances of a standard
       NuttX driver under the /dev directory. To repeat the above
       example, the USB host mass storage class driver
       (drivers/usbhost/usbhost_storage.c) will register a standard,
       NuttX block driver interface (like /dev/sda) that can be
       used to mount a file system just as with any other other
       block driver instance.  Examples: See the call to
       register_blockdriver() in the function usbhost_initvolume()
       in the file drivers/usbhost/usbhost_storage.c.

NuttX-5.17
----------

The 64th release of NuttX, Version 5.17, was made on January 19,
2011 and is available for download from the SourceForge website.
This release follows close on the heels of the 5.16 release and
extends the USB host capabilities first introduced in that version.

  * The LPC17xx USB host controller driver was extended to (1) add
    support for low-speed devices, (2) handle multiple concurrent
    transfers on different endpoints (still only one TD per endpoint),
    and (3) handle periodic interrupt endpoint types.

  * Add a USB host HID keyboard class driver.  Now you can connect
    a standard USB keyboard to NuttX and receive keyboard input for
    an application.

And other changes as detailed in the ChangeLog.

NuttX-5.18
----------

The 65th release of NuttX, Version 5.18, was made on February 27,
2011 and is available for download from the SourceForge website.
This is first release from the new NuttX SVN repository.  This
release is made primarily to keep the release tarball in synchronization
with SVN.  Many smaller changes have been made as identified in the
ChangeLog.  Headlines include:

  * Incorporate several important uIP patches -- including the well
    known patch to handle missing SYNACK.
  * The Freescale mc8s12ne64 port is code complete but testing has
    not yet begun due to toolchain issues.  Added support for the
    Future Electronics Group NE64 Badge board.
  * Added support for a new STM32 board, the ISOTEL NetClamps VSN
    V1.2 ready2go sensor network platform.  This board is based on
    a STM32F103RET6 and includes some interesting power saving/clock
    control extensions.
  * USB host support expanded to handle vendor specific USB devices.
  * Incorporated the LUFA HID parser.
  * Various bugfix as detailed in the ChangeLog

NuttX-5.19
----------

The 66th release of NuttX, Version 5.19, was made on March 12, 2011
and is available for download from the SourceForge website.  This
release includes several new features in various states of integration
and maturity:

  * 486SX QEMU port.  This port supports the Intel 486SX architecture
    using the QEMU simulator.  Initial functionality is in place a
    partially tested.  There are still some outstanding issues with
    timer interrupts.
  * Platform specific application support.  A new apps/ directory
    appears in this port.  This apps/ directory provides a mechanism
    for applications using NuttX to have a highly customized
    initialization process. It supports a set of end-user applications
    than can be executed (1) standalone so you can have a fully
    customized application startup, or (2) on top of NSH.  Think
    of it this way:  In a buckled-up embedded application, your
    end-user programs will probably have their own dedicated start-up
    logic.  But, during development, you might want to have you
    applications available and executable from the NSH command line.
    This apps/ add-on (and NSH hooks) was contributed by Uros to
    accomplish just that.
  * NSH was also extended to support application specific ROMFS
    /etc/init.d/rcS start-up scripts.  This feature, as well, as
    all of the above-mentioned apps/ directory support was contributed
    by Uros Platise
  * Additional NSH improvements and bug fixes.  See the Changelog
    for details.
  * This release also provides a new SLIP network driver.  This
    driver should support point-to-point network communications to
    a host using TCP/IP or UDP.  This driver is code complete, but
    not tested in this release.
  * New RAMTRON FRAM driver (contributed by Uros Platise)
  * New generic 16550 UART driver.
  * Cortex-M3 Power improvements: Waits for Interrupt (WFI) in idle
    loop for reduced power consumption (LPC17xx and STM32 only -
    contributed by Uros Platise))
  * New waitpid() system interface.
  * Additional bugfixes: pipes, stdint.h, STM32 SDIO and SPI drivers

NuttX-6.0
---------

The 67th release of NuttX, Version 6.0, was made on March 21, 2011
and is available for download from the SourceForge website.  The
version number of this release was bumped from 5.19 to 6.0.  A
change in the major revision number is used to reflect an incompatibility
with previous versions.  In this release, the NuttX core OS
functionality has been separated from NuttX application-related
functionality.  These are provided as separate tarballs:

  * nuttx-6.0.tar.gz, and
  * apps-6.0.tar.gz

The purpose of this separation is both to better organize and
modularize the NuttX source tree, but also to provide better support
for incorporation of end-user applications with Nuttx.

The incompatibility results from the changes to the board configuration
logic needed to supported the separable application.  The major
changes to the configuration include:

  * CONFIG_APPS_DIR - This should not be set.  The default is
    ../apps.  This should only be set if you have a custom,
    product-specific application directory in some different location.

  * appconfig - Each board configuration now requires a new file
    called 'appconfig.'  As its name suggests, this file provides
    new configuration information needed by the logic in ../apps.

In addition to this major reorganization in the directory structure,
this release also includes some important extensions to existing
features and some important bugfixes.  These include:

  * The SLIP driver was been well debugged and significantly
    re-designed.  Now you can have an Ethernet connection to you
    board even if you have no Ethernet hardware.  How cool is that?

  * The QEMU i486 port is now functional.  It has also been reported
    to work on the Bifferboard (see http://bifferos.bizhat.com/).

  * And extensions to the uIP driver interface, and

  * Bug fixes to fopen() and STM32 GPIO configuration

Please see the ChangeLog for details.

NuttX-6.1
---------

The 68th release of NuttX, Version 6.1, was made on April 10, 2011
and is available for download from the SourceForge website.  The
6.0 release introduced a detach-able application environment to
build applications outside of the NuttX source tree.  The primary
purpose of this release is to correct numerous build problems
introduced by that architectural change:

  * In many newer environments, NuttX produced strange Makefile
    errors but built correctly in older environments.  A fix provided
    by Rafael Noronha was incorporated and is reported to fix those
    build problems.
  * The apps/ directory build system would not handle Windows-native
    toolchains due to obscure path formatting issues.
  * And other problems as detailed in the Changelog.

Many additional changes were made in the 6.1 release for another
major architectural change:  NuttX will now build as a separately
linked microkernel.  In this build option the RTOS builds as a
kernel, applications build separately and interface with kernel via
system calls.  Applications run in user mode and kernel logic users
in kernel-mode.  This provides a secure environment for NuttX.  This
feature is fully coded in NuttX-6.1, but has not been tested due
to higher priority tasks that have arisen.

Related to this change, support for the Cortex-M3 memory protection
unit (MPU) has been integrated with the NuttX kernel build to provide
an even higher level of security.

NOTE: This kernel build is an option; the default build configuration
is still the standard, flat, unsecured RTOS as in previous releases.

Additional new features in this release:

  * Support for LPC17xx GPIO interrupts (with much support from
    Decio Renno).
  * Basic timer support for STM32 (Contributed by Uros Platise)
  * A binfs file system.  This is a tiny pseudo file system that
    lets named applications to be viewed and accessed in NSH under
    the /bin directory.
  * An I2C-based driver for the LIS331DL MEMS motion sensor.
    (Contributed by Uros Platise.)
  * A configuration for the Embedded Artists LPCXpresso LPC1768 board.
  * The user_initialize() interface has been removed.

And several bugfix associated with SD drivers, opendir(), signed
8-bit types (int8_t), and USB serial device.  See the ChangeLog for
details.

NuttX-6.2
---------

The 69th release of NuttX, Version 6.2, was made on May 6, 2011 and
is available for download from the SourceForge website.  The 6.2
release includes several new features:

  * NXFFS: The obvious new feature is NXFFS, the NuttX wear-leveling
    FLASH file system.   This new file system is intended to be
    small for the MCU usage and has some limitations.  No formal
    documentation of NXFFS yet exists.  See the fs/nxffs/README.txt
    file for details (see
    http://svn.code.sf.net/p/nuttx/code/trunk/nuttx/fs/nxffs/README.txt?view=log)
  * Support for NXP LPCXpresso LPC1768 board on the Embedded
    Artists base board.  The Code Red toolchain is supported under
    either Linux or Windows.   Verified configurations include
    dhcpd, nsh, nx, ostest, thttpd, and usbstorage.
  * Support for the Univision UG-9664HSWAG01 OLED with Solomon
    Systech SD1305 LCD controller.
  * A new RAM MTD driver with FLASH simulation capability.
  * A version.h file is now automatically generated so that C code
      can now be version aware.

In addition to these new feature, several important bugfixes are
included in this release correcting problems with dup2(), LPC17xx
GPIO interrupts, LPC17xx UART2/3, the FAT file system, build issues,
and strrch().  See the ChangeLog for more details.

NuttX-6.3
---------

The 70th release of NuttX follows only a nines days after the release
of version 6.2.  It was released on May 15, 2011.  This special
back-to-back release was made so that the current released version
of NuttX will correspond to the initial release from the RGMP
project.

This release adds architecture support and build configuration for
RGMP.  RGMP is a project for running GPOS and RTOS simultaneously
on multi-processor platforms. See
http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further
information about RGMP.

This release also includes support for STM32 FLASH, build improvements,
and initial, incomplete support for the MicroChip PIC32MX MCU.  Bug
fixes are included for some build problems, USB host class driver
error handling, NX graphics color mapping, and problems with C
standard I/O buffer flushing.  See the ChangeLog for further details.

NuttX-6.4
---------

The 71st release of NuttX, Version 6.4, was made on June 6, 2011
and is available for download from the SourceForge website.  The
6.4 release includes several new features:

  * A new, full-featured FTP client.  This client may be used as a library
    for automated FTP or via an FTP client shell.  The FTP shell
    supports the following commands: cd, chmod, get, help, idle,
    login, ls, quit, mkdir, noop, put, pwd, rename, rhelp, rm,
    rmdir, size, time, and up.  A configuration is available for
    the NXP LPC17xx to demonstrate this functionality.
  * A functional C1101 wireless driver (contributed by Uros Platise)
  * A PCI-based E1000 Ethernet driver (contributed by Yu Qiang)
  * New C library functions: inet_addr() (contributed by Yu Qiang),
    strndup(), asprintf()
  * Reduced memory allocation overhead for MCUs with small heaps (<64K).
  * fdopen() now works with socket descriptors allowing standard
    buffered C functions to be used for network communications.
  * The NSH ifconfig command can now be used to set or change the
    IP address (contributed by Yu Qiang)

This release also includes some completed but untested functionality.

  * The MicroChip PIC32MX port is now code complete and ready to
    begin testing.  Unfortunately, testing will be delayed due to
    tool issues.
  * Support for the NXP LPC315x MCUs.

Additional miscellaneous enhancements and bug fixes to task_delete(),
recvfrom(), and other changes as noted in the ChangeLog.

NuttX-6.5
---------

The 72nd release of NuttX, Version 6.5, was made on June 21, 2011
and is available for download from the SourceForge website.  The
6.5 release is all about support for the Atmel 8-bit AVR family.
I have been interested in the AVR family for some time but because
of the severe SRAM constraints and because of the availability of
many tiny schedulers for the AVR, it has not been "on the radar
screen."  However, I have recently become interested because of
interest expressed by members of the forum and because of the
availability of newer, larger capacity AVR parts (that I don't have
yet).

This release corresponds with SVN release number: r3730

This release includes support for the following AVR boards.  As
with any initial support for new architectures, there are some
incomplete areas and a few caveats that need to be stated.  Here
they are, ordered from the least to the most complete:

  * SoC Robotics Amber Web Server (ATMega128).

    This port of NuttX to the Amber Web Server from SoC Robotics
    (http://www.soc-robotics.com/index.htm).  Is only partially in
    place.  The Amber Web Server is based on an Atmel ATMega128
    (128K FLASH but only 4K of SRAM).

    STATUS: Work on this port has stalled due to toolchain issues.  It
    is complete, but untested.

  * Micropendous 3 AT9USB647

    This port of NuttX to the Opendous Micropendous 3 board. The
    Micropendous3 may be populated with an AT90USB646, 647, 1286,
    or 1287.  See http://code.google.com/p/opendous/. I have only
    the AT90USB647 version for testing.  This version has very
    limited memory resources: 64K of FLASH and 4K of SRAM.

    STATUS: The basic port was released in NuttX-6.5.  This basic
    port consists only of a "Hello, World!!" example that demonstrates
    initialization of the OS, creation of a simple task, and serial
    console output.  The tiny SRAM limits what you can do with the
    AT90USB647 (see issues below).

  * PJRC Teensy++ 2.0 AT9USB1286

    This is a port of NuttX to the PJRC Teensy++ 2.0 board.  This
    board was developed by PJRC (http://pjrc.com/teensy/). The
    Teensy++ 2.0 is based on an Atmel AT90USB1286 MCU with 128K
    of FLASH and 8K of SRAM; a little more room to move than the
    AT90USB647.

    STATUS:  The basic port was released in NuttX-6.5.  This basic
    port consists of a "Hello, World!!" example and also slightly
    simplified NuttShell (NSH) configuration (see the NSH User Guide
    at http://www.nuttx.org/NuttShell.html).

    An SPI driver and a USB device driver exist for the AT90USB as
    well as a USB mass storage configuration.  However, this
    configuration is not fully debugged as of the NuttX-6.5 release.

AVR-specific issues.  The basic AVR port is solid and biggest issue
for using AVR is its tiny SRAM memory and its Harvard architecture.
Because of the Harvard architecture, constant data that resides to
flash is inaccessible using "normal" memory reads and writes (only
SRAM data can be accessed "normally").  Special AVR instructions
are available for accessing data in FLASH, but these have not been
integrated into the normal, general purpose OS.

Most NuttX test applications are console-oriented with lots of
strings used for printf and debug output.  These strings are all
stored in SRAM now due to these data accessing issues and even the
smallest console-oriented applications can quickly fill a 4-8K
memory.  So, in order for the AVR port to be useful, one of two
things would need to be done:

1. Don't use console applications that required lots of strings.
   The basic AVR port is solid and your typical deeply embedded
   application should work fine.

2. Create a special version of printf that knows how to access
   strings that reside in FLASH (or EEPROM).

NuttX-6.6
---------

The 73rd release of NuttX, Version 6.6, was made on July 11, 2011
and is available for download from the SourceForge website.  The
6.6 release adds several smaller features but is mostly a bugfix
release.

Bugfixes include

  * Fixed several NX Graphics bugs: Rendering fonts at >8 bits-per-pixel,
    graphics move logic, and display artifacts that appear when a
    window is closed.
  * Corrections to the USB host mass storage class driver
  * STM32 bugfixes: serial driver, GPIO interrupt handling
  * LPC17xx: Changes for a success compilation with no console.
  * Corrections to the Teensy AT90USB SD driver
  * Changes for a clean compilation under the ZDS-II toolchain.

Minor features:

  * Add logic to extract printf strings from FLASH (but there are
    still printf issues for that target)
  * Added a configuration for the Sure Electronics PIC32MX board.
    However, higher priority tasks have stopped work on that
    configuration.
  * Added several new configurations for the STMicro STM3210E-EVAL
    board.
  * Added support for the STM3210E-EVAL board: (1) LCD in either
    landscape or portrait mode, and (2) interrupting buttons.
  * Added a configuration option to use different serial ports for
    debug and for the NSH serial console (there are some issues
    with CR-LF expansion and character echo if NSH is not run on
    the console).
  * Standardized the button press and button interrupt interfaces
    so that they are common across all boards.
  * Added a new graphics example that focuses on placing text on
    the background while pop-up windows occur.  Text should continue
    to update normally with or without the popup windows present.
  * Added ARM stack checking logic.

See the ChangeLog for a detailed description of these changes.

NuttX-6.7
---------

The 74th release of NuttX, Version 6.7, was made on August 2, 2011
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.7.tar.gz and
apps-6.7.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).  Changes in this release are summarized
below:

  * New OS APIs: Add the standard sem_timedwait() interface.
  * FAT File System:  Adds (optional) support for VFAT long file
    names.
  * USB:  Now the mass storage device can be connected when needed
    and disconnected when not needed (or re-connected as a different
    kind of device).
  * Touchscreen Support:  Defined a new NuttX touchscreen interface.
    Added a driver for the TI TSC2007 touchscreen controller chip.
  * NX Fonts:  Add support for multiple fonts; developed a tool to
    convert open source fonts into NuttX format; Converted and
    installed nine new, high quality fontsets.
  * NX Graphics: Add new NX APIs to support drawing of wide lines
    in any orientation.  Added new low level routines to set
    individual pixel more efficiently.
  * Build system:  Added a export target that will bundle up all
    of the NuttX libraries, header files, and the startup object
    into an exportable tarball.
  * LPC17xx: A CAN driver was contributed by Li Zhuoyi (Lzyy).
  * STM32: New NX-related configurations to exercise text and
    graphic image displays.
  * C Library:  Added a fixed precision atan2() math function.
  * Bugfixes:  Serial RX overrun error, FAT upper/lower NT 8.3 name
    handling fixed.  FAT directory allocation and initialization
    bug.  STM32 SDIO DMA race condition bug.  eZ80 UART1 serial
    driver errors (Paul Osmialowski)

NuttX-6.8
---------

The 75th release of NuttX, Version 6.8, was made on August 19, 2011
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.8.tar.gz and
apps-6.8.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).  Changes in this release are summarized
below:

  * NuttX has been ported to run on the Freescale Cortex-M4 "Kinetis"
    boards.  Two board ports are available for (1) the Kinetis
    KwikStik-K40 and (2) the Kinetis TWR-K60N512 tower.
  * Support for RGMP 0.3.  This version of RGMP now runs on the
    OMAP4430 (arm) pandaboard
  * LPC17xx CAN driver extended to support both CAN1 and CAN2
    (submitted by Li Zhuoy (Lzzy))
  * Fixed several critical bugs related to signal handling
    initialization and for signals the wake up tasks that are waiting
    to send or receive message queues.Both are important.  (submitted
    by hkwilton).
  * drivers/can.c:  Fixed a semaphore overflow problem in the CAN
    driver (reported by Li Zhouy (Lzzy)).
  * Added a new ADC driver infrastructure and TI ADS1255 driver
    both developed and submitted by Li Zhouy (Lzzy)).

See the Changelog for additional changes included in this release.

NuttX-6.9
---------

The 76th release of NuttX, Version 6.9, was made on September 11, 2011
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.9.tar.gz and
apps-6.9.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release includes a few new features and several important bug fixes.
The new features (some still incomplete) include:

  * Analog Support/ NXP LPC17xx: New DAC sub-system including ADC and DAC
    drivers for the LPC17xx.  Extensions to the ADS1255 driver.
    (Contributed by Li Zhuoyi (Lzyy))

  * Power Management:  Added a new NuttX power management sub-system for
    controlling and coordinating reduced power states.  At present, only
    verified in a simulation environment.

  * I2C Test Tool:  A new application was added that can be used to
    verify and debug I2C interfaces from the NuttShell (NSH) command
    line.

  * NuttShell (NSH):  In addition to the I2C test tool, a date command
    is now supported (if CONFIG_RTC is defined) that can be used to
    read and set the RTC.

  * NXP LPC17xx: I2C and DAC driver for the NXP LPC17xx family submitted by Li Zhuoyi
   (Lzyy)

  * Kinetis Cortex-M4:  Added a SDHC driver for the Kinetis parts.
    Complete debug of the Kinetis SDHC driver was not completed, however,
    do to some higher priority tasks that forced me to stop work.

  * Other new drivers: Driver for I2C-based at24cxx EEPROM submitted by
    Li Zhuoyi (Lzyy); Driver for the LM-75 temperature sensor.  Support
    for the LM-75 temperature sensor integrated into the SM3210E-EVAL
    development board.

  * NuttX Graphics (NX):  Added new NX interfaces for drawing circles,
    both circle outlines and filled circles.

  * FLASH: Added a function that accepts the path to a block driver and
    then erases the underlying FLASH memory

  * Build System:  The Make export logic now also tries to track down all
    architecture-specific header files and include these in the NuttX
    export bundle as well.  Various changes and modifications so that
    NuttX wil build on FreeBSD using the ASH shell (submitted by Kurt Lidl).

Bugfixes, order roughly on decreasing criticality include:

  * STM32 I2C Driver:  Add resets, timeout, and other fixes to work
    reliably with the I2C tool.  Corrected a major error introduced in
    NuttX 6.8.

  * BCH Driver.  Several important bugs (noted by Li Zhuoyi (Lzyy))
    were fixed.

  * C Library:  Fixed errors in gmtime() and gmtime_r() that could lead to
    errors in date calculations.

  * Timing:  Correct an error in the tv_nsec calculation that happens
    only config CONFIG_RTC is enabled

  * Build System: Use of -print-libgcc-file-name to get path to
    libgcc.a might select the wrong libgcc.a if a multilib toolchain
    is used

NuttX-6.10
----------

The 77th release of NuttX, Version 6.10, was made on October 6, 2011
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.10.tar.gz and
apps-6.10.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4028

This release includes a few new features and several important bug fixes.
The new features (some still incomplete) include:

  * CDC ACM serial class device-side driver

  * RTC:  Now supports hi-res and lo-res hardware RTC.  The lo-res RTC
    runs at 1Hz.

  * STM32 I2C driver.  Now supports faster, polled mode of operation.
    Added an I2C trace capability.

  * ADS7843E touchscreen driver.  As used on the SAM3U-EK development
    board.

  * AT91SAM3U SPI driver.  To support the ADS7843E toucscreen

  * X11 Support on simulation target.  Build errors in the X11 windows
    for the simulated target have been correct.  Added support for a
    simulated touchscreen on the X11 window (based on mouse inputs).

  * System Timer. Added support for a 64-bit system timer.

  * TIFF Support. Added a TIFF library (currently used for storing
    LCD screen shots).

  * LCD Support.  Added a test to verify that we read and write correct
    to LCD GRAM memory.

  * I2C tool. Extended to support to include a verify command and
    repititions and auto-address increment for most commands.

  * USB terminal example.  Line oriented serial bridge connects a host
    USB serial terminal to a host UART serial terminal.

  * Build System.  apps/ Makefile will now include external directories
    in the application build.

Bugfixes, order roughly on decreasing criticality include:

  * Message Queues.  Correct errors in mq_timedsend() and
    mq_timedrecieve().

  * FAT. Writes that cross sector boundaries, stray write into the FAT,
    and a FAT long file name issue

  * NXFFS.  Added a missed error check.  Files cannot be opened for
    writing if they are already opened for reading.

  * Library: fopen() for append modse was not appending.

  * STM32 I2C driver.  Correct another conflict between concurrent FSMC
    and I2C1 accesses.  Fixed some bad error detection logic.

  * STM32 SDHC driver.  Interrupts were being left disabled.

NuttX-6.11
----------

The 78th release of NuttX, Version 6.11, was made on November 12, 2011
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.11.tar.gz and
apps-6.11.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4090

This release is a maintenance release that includes a few new features
and some important bugfixes.  New features include:

    * NX Graphics:  New interfaces to read from graphics memory
    * Drivers:  AT24 FLASH driver will now supports clustering of blocks
      to achieve a larger, more usable block size for NXFFS.
    * STM32: LCD color corrections
    * PIC32: Board configuration for the Microchip PIC32 Ethernet Starter kit
      (not yet verified), new GPIO support library, button and LED support
      for the Sure Electronics PIC32MX board.  A lot of progress has been
      made on the PIC32 NuttX port, but it is still not ready for prime time.
    * NXP LPC3152: Board configuration for the Embedded Artists EA3152.

Bugfixes, order roughly on decreasing criticality include:

    * NXFFS: Corrected critical bugs in initialization, some full FLASH handling,
      and errors in certain cases where the FLASH is repacked.
    * ARM EABI: Fix stack aligment required for passing floating point values.
    * Build system: Fix build issues when g++ is used as the compiler.
    * NX Graphics: Bitmap error handling, correct RGB color conversion macros,
      Error when the background window is released.
    * STM32: RTC build fixes, LCD color corrections
    * Simulation target: build fixes
    * C Library: fclose() return value.

See the change log for more detailed information.

NuttX-6.12
----------

The 79th release of NuttX, Version 6.12, was made on December 6, 2011
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.12.tar.gz and
apps-6.12.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4141

New features in this release include:

    * STM32. Basic support added for the STM32 F4 family.  Board support
      verified for the STMicro STM3250G-EVAL board.
    * FAT.  Enhanced partition handling.
    * SDIO-Based SD Card support.  Add support for large (>4Gb) devices
    * Graphics.  Added four new small sans serif fonts.
    * Drivers. Fix a banding problem with the R61580 LCD.

Bugfixes, order roughly on decreasing criticality include:

    * FAT. Fix errors in how the first entries in the root directory are
      added.  Fix errors in FAT date/time handling.
    * Signals.  Fix bug in certain sig_timedwait() error handling.
    * Drivers. Fix cloned errors in poll() handling in several drivers.
    * Message Queues.  errno was not being set correctly by mq_notify().
    * C Library. wchar_t is a built-in type for C++

NuttX-6.13
----------

The 80th release of NuttX, Version 6.13, was made on December 26, 2011
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.13.tar.gz and
apps-6.13.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4231

New features in this release include:

    * Drivers. New standard interface for PWM drivers and common
      "upper half" PWM driver.  Updated the MP25x driver to support
      the Macronix MX25 chips (submitted by Mohammad Elwakeel).
    * STM32 F1/F4.  Added an Ethernet driver, ADC drivers, DAC driver,
      PWM driver, CAN driver, F4 RTC driver, F4 DMA support,
      logic for saving/restoring F4 FPU registers in context switches.
    * STM32 Boards.  Added STM3240G-EVAL DHPCD and nettest configuration.
      Support for a new STM32 board, the HY-Mini STM32v board, was
      contributed by Laurent Latil
    * PIC32.  The port to the Microchip PIC32MX is finally functional and
      reliable.  The NuttX PIC32 port has verified configurations for
      the OS test and the NuttShell (NSH) both exist.
    * Tests:  New re-usable tests (in apps/examples) for PWM, ADC, and
      CAN loopback.  Several existing tests can now be built as NSH built-in
      applicaitons (dhcpd, nettest, and all of the new tests).

Bugfixes, order roughly on decreasing criticality include:

    * STM32:  Correct handling of data overrun conditions.  Existing logic
      would hang with infinite interrupts when a data overrun occurred.
    * DHCPD.  Fix several problems using host order address where network
      addresses expected (and vice versa).

And several others.  See the ChangeLog for more details.

NuttX-6.14
----------

The 81st release of NuttX, Version 6.14, was made on January 15, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.14.tar.gz and
apps-6.14.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4301

New features in this release include:

    * Drivers. The upper-half PWM driver will now support a pulse count (as
      would be needed to control a stepper motor).

    * STM32.  The CAN driver has been verified in loopback mode.  ADC driver
      support for the STM32 F4.  Add support for UART4-5 and USART6
      (Contributed by Mike Smith).  The PWM driver now supports a pulse
      count for TIM1 and TIM8.  Timer driver now supports the F4's 32-bit
      timers (Contributed by Mikhail Bychek)

    * STM32F4Discovery.  Support for the STM32F4-Discovery board contributed
      by Mike Smith.

    * STM3240G-EVAL.  Add support for user control of LEDs.

    * LPC17xx.  Add support for loopback mode to CAN driver.  CAN TX done
      perations are now interrupt driver.  Now supports configurable CAN bit
      rate.

    * LPC1766-STK. Add support for on-board buttons. Add support for user
      control of LEDs.

    * LM3S.  Add support for the LM3S6432S2E on the TI RDK-S2E (Contributed
      by Mike Smith)

    * PIC32MX.  USB device-side driver (needs further testing).  A partial
      Ethernet driver is also in place.

    * Library. Support added for fixed floating point fieldwidths in output
      formatting (Contributed by Mikhail Bychek)

    * Build.  New targets apps_clean and apps_distclean to simplify working
      with application diretories.

Bugfixes include:

    * Drivers.  Fixed a buffer-full test in the upper-half CAN driver.

    * STM32.  GPIO initialize logic (submitted by Mike Smith).  Fix the
      debug logic that dumps the GPIO configuration.

    * LPC17xxx.  Correct an integeter overlow in GPIO interrupt setup
      (prevented pins > 15 from being used as interrupt sources).  Correct
      a value used in GPIO interrupt number range test.

    * FAT.  Now returns the correct error value when it is unable to
      recognize the file system.

    * Build.  MAC OS build fixes (submitted by Mike Smith)

And several others.  See the ChangeLog for more details.

NuttX-6.15
----------

The 82nd release of NuttX, Version 6.15, was made on February 12, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.15.tar.gz and
apps-6.15.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4387

New features and extended functionality:

    * General Drivers:  Add support for (29-bit) extended CAN IDs.  Add an
      infrastructure to support battery drivers.   Add a driver for MAX17040x
      battery "fuel gauge".  Add support for Composite USB drivers (in
      particular for a CDC/ACM with MSC USB composite driver).

      Added a new RAM logging driver.  This will allow debug output into
      a RAM buffer associated with a character driver at /dev/syslog.
      Added the new command 'dmesg' to NSH that can be used to dump the
      current contents of the log.  This is useful for systems that do not
      have the usual serial console (for example, if you only have a
      Telnet console with NSH).

    * Networking:  Add a lower level, primitive socket interface.  Telnet
      driver:

      A New Telnet daemon was created.  It wraps a Telnet session within a
      character driver that can serve as a "controlling terminal."  The
      Telnet session will then be inherited by tasks created from the
      Telnet session and the stdin/stdout from the created task will
      still go through the same Telnet connection.

    * STM32 Drivers.  PWM driver pulse count was limited to 128; now is
      (essentially) unlimited.  Add support for (29-bit) extended CAN IDs.
      Add support for I2C3.  The SDIO driver is (mostly) verified on the
      STM32 F4 platforms.

    * LPC17xx Drivers.  Extended the CAN driver so that the TSEG1 and TSEG2
      bit times can be set via the NuttX configuration.  Add support for
      (29-bit) extended CAN IDs.

    * PIC32 Drivers. The PIC32 Ethernet driver is code complete (but still
      untested).

    * FTPD.  Add a new FTP server daemon.  This is based loosely on
      the hwport_ftpd library provided by Jaehyuk Cho.

    * Library:  Add support for on_exit().  Implemented tcsetattr() and
      tcgetattr().  Moved the old, too-smart fgets() to a new application
      library function called readline().  Dumbed down the original fgets().
      Add strcasestr(), avsprintf(), inet_ntop(), and inet_pton().
      Add support to enable or disable debug output.

    * Build system: Support for building a 32-bit simulation executable on
      a 64-bit Linux machine.  Correct a dependency issue in the arch/*/src/board
      directory.

Bugfixes:

    * System:  Correct PTHREAD_MUTEX_INITIALIZER

    * FAT: Fix an error in the FAT statfs() reported by David Sidrane.

    * STM32: Fix clock frequencies for APB2 timers.  Correct AFIO register
      offset.

    * PIC32.  Correct GPIOs used for LEDs on the Sure PIC32MX board.

    * NSH.  Wait for a USB connection if a USB serial class is used to
      interface with the host.

Additional bugfixes, name changes, and other differences as detailed in the
ChangeLog.

NuttX-6.16
----------

The 83rd release of NuttX, Version 6.16, was made on March 10, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.16.tar.gz and
apps-6.16.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4475

New features and extended functionality:

    * ARMv7M Support:  Includes new, streamlined Cortex-M exception
      handling provided by Mike Smith.  Context switching support for the
      Cortex-M4 FPU registers is now provided (in both "lazy" and "non-lazy"
      modes)

    * General Drivers: Added a generic "upper half" Quadrature Encoder driver.
      The USB CDC/ACM serial driver can now be dynamically connnected or
      disconnected from the host (programmatically or using NSH commands).

    * STM32 Drivers: Added a "lower half" Quadrature Encoder driver.
      Verified the STM32 F4 DMA driver; Added F4 DMA support to the existing
      STM32 SDIO driver.

    * STM32 Board Support.  Added support for the STM32 F2 family and
      for the STM3220G-EVAL board (contributed by Gary Teravskis).
      Support is now included for C++ static constructors (verified using
      the Atollic toolchain). Added support for the SRAM available on the
      STM3240G-EVAL board.

    * PIC32 Drivers.  PIC32MX USB (device) driver is now functional.
      The PIC32MX Ethernet driver not yet fully verified (and an
      unverified SPI driver is also available).

    * Networking.  Added a lower-level, thread-independent socket layer.
      Parts of this layer were created in 6.15 to support the FTPD
      controlling terminal; this support has been extended in order
      to support an NFS file system (not yet released).

    * NuttShell (NSH).  NSH will now support a USB serial connection for
      the console (such as CDC/ACM).  This is useful in environments
      where there is no physical serial port on the board.

    * Build System.  Reorgnaization of networking header files.

Critical Bugfixes.  The following bug fixes are considered critical:

    * Networking:  Fixed a "leak" in the TCP/IP read-ahead buffering logic.
      Corrected an error in TCP/IP sequence numbering/ACK logic which
      occurred when read-ahead buffering memory is exhausted.

    * STM32 Drivers: Fixed an buffer sizing error in the STM32 Ethernet
      driver.

Additional Bugfixes:  Other important bug fixes are listed below. See
the ChangeLog of a complete, detailed list of bug fixes.

    * Networking: Corrected recv()/recvfrom() return value.  Added logic to
      monitor for loss of connection after a new connection has been
      established via accept() (Contributed by Max Nekludov).  Add
      logic to select() to correctly handle POLLHUP (Contributed by Max
      Nekludov)

Additional bugfixes, name changes, and other differences as detailed in the
ChangeLog.

NuttX-6.17
----------

The 84th release of NuttX, Version 6.17, was made on April 14, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.17.tar.gz and
apps-6.17.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4607

New features and extended functionality:

    * Networking:  Additional low-level, thread-independent socket
      interfaces (for NFS client support).

    * RTC:  Added a new interface call clock_synchronize().  This function
      will reload the system time from an RTC and is required when the
      system re-awakens from certain deep-sleep modes.

    * Graphics:  Add NxConsole.  This is a character device driver that
      wraps an NX window and can be re-directed for stdout.  This allows,
      for example, a pop-up graphics window that contains a NuttShell (NSH)
      session.  A test of NxConsole is available at apps/examples/nxconsole.

    * Watchdog Drivers:  Added an interface definition an "upper half"
      driver to support watchdog timers.

    * Calypso:  Support for TI Calypso-based cellphones (as supported by
      the Osmocom-BB project) was contributed by members of the Osmocom-BB
      team.  This includes configurations for the Compal e88 and e99 phones.

    * USB Device Interface:  Needed to extend the USB device interface
      because there was no mechanism for passing endpoint OUT data that
      may need to accompany a setup request.

    * STM32 drivers:  Added some power management controls for entering
      reduced power consumption states.  An OTG FS driver was completed
      and partially verified (this driver seems to be functional but since
      it has been test so lightly, it might better be listed in the
      next section "Work in progress").

    * PIC32 drivers: The PIC32 Ethernet driver is now stable.  The PIC32
      USB device controller driver is now functional (but not yet stable).

    * PIC32 boards: Added support for the Sure DB-DP11212 PIC32 General
      Purpose Demo Board.  There is now a PIC32 Starter Kit that
      provides NSH only through a Telnet connection.

    * Build System:  Some header files were moved into include/nuttx.
      The goal is to move any non-standard header files to include/nuttx
      or include/arch.  Moved include/math.h to include/nuttx/math.h;
      this file is now only instantiated as the 'system' math.h if
      CONFIG_ARCH_MATH_H=y is defined.

    * Tools:  Added tools/cmpconfig.c, a tool for comparing two
      configuration files.

Work in progress.  This release includes some partially completed
work that is still not ready for prime time.

    * NFS Client:  Work is progressing on support for an NFS client
      file system.    This is a port of the BSD NFS client file system
      that is being done by Jose Pablo Rojas V.

    * Automated Configuration:  Automated configuration based on the
      kconfig-frontends tool is being incorporated into the build
      system.  The configuration is still not complete enough for
      general use in this release.

    * STM32 Drivers:  Added files that will (eventually) hold an STM32
      OTG FS host driver.  This is still a work in progress.

Bugfixes:

    * Networking:  Corrected a deadlock that only occurred when
      executing the NSH 'ifconfig' command over Telnet.

    * File system:  Fix incorrect return errno value from read() when
      the file is opened write-only.

    * Graphics:   Fix several compilation errors that have crept into the
      multi-user NX server because of lack of use.

    * STM32:  In order to use CAN2, both CAN1 and CAN2 clocking must be
      enabled. Fixed a troublesome bug in the STM32 F4 I2C driver that
      resulting in timeouts.

    * LPC17xx: Fixes for errors the crept in the LPC17xx DAC logic
      Contributed by Lzyy).

    * Build System:  Reordered the link command line to account for new
      versions of libgcc.a that require symbols from the application
      (abort()).

NuttX-6.18
----------

The 85th release of NuttX, Version 6.18, was made on May 19, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.18.tar.gz and
apps-6.18.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

The majority of changes in this release are focused on supporting the
synchronized release of NxWM, the NuttX tiny window manager.  That
window manager is released as part of the NxWidgets package, but depends
upon many of the changes in this NuttX release.

This release corresponds with SVN release number: r4751

New features and extended functionality:

    * Drivers.  Added a watchdog timer driver infrastructure.  Add general
      support for STMicro STMPE811 I/O Expander/touchscreen device.

    * STM32. Add support for the STM32 IWDG and WWDG watchodog timers.  DMA
      now supports cicular buffer mode; serial driver now uses circular
      DMA to improve Rx performance (Contributed by Mike Smith).

    * STM3240G-EVAL Board.  Add support for the LCD and for the STMPE811
      I/O Expander as a touchscreen controller.

    * PIC32 Boards.  Board support for the Mikroelektronika PIC32MX7
      Multimedia Board (MMB) and for the Sparkfun UBW32 PIC32 board.

    * NX. Framed windows are now draw in three colors instead of just two.
      Numerous other extensions needed to support NxWM (see the ChangeLog
      for details).

    * Library. Add prctl() command that can be used to setting and getting
      the names of threads.  This (plus several other improvements and bug
      fixes) are part of a larger effort to improve task monitoring
      capabilities.

Work in progress.  This release includes some partially completed
work that is still not ready for prime time.

    * NFS Client. Work is progressing on support for an NFS client
      file system.   This is a port of the BSD NFS client file system
      that is being done by Jose Pablo Rojas V.

    * Automated Configuration. Automated configuration based on the
      kconfig-frontends tool is being incorporated into the build
      system.  The configuration is still not complete enough for
      general use in this release.

    * STM32 Drivers. Added files that will (eventually) hold an STM32
      OTG FS host driver.  This is still a work in progress.

Bugfixes (see the change log for details) :

    * sched_setscheduler() return value (Contributed by Richard Cochran).

    * stdio. Ignore CONFIG_STDIO_LINEBUFFER if the file was opened in binary mode.

    * fopen(). Correct an error in parsing open mode string.

    * serial driver. Improved performance be reducing the amount of time
      that Rx interrupts are disabled.

    * recvfrom(). Fix a compilation problem.

    * CDC/ACM device driver. Fix an infinite loop that occurs when the serial
      device is unregistered.

    * STM32 OTG FS device driver. Numerous fixes and the driver is partially
      functional but there are still some issues that become apparent when
      debug output is disabled.

    * fcntl(). Always returned zero on success; however, some fcntl commands
      need to return non-zero values on success.

    * graphics:  Many multi-use mode fixes added to support NxWM (see the
      ChangeLog for details).  Auto-raise is temporarily disabled in multi-
      user mode because it causes some problems with NxWM.

    * on_exit():  Fix compilation errors if CONFIG_SCHED_ONEXIT is enabled.

NuttX-6.19
----------

The 86th release of NuttX, Version 6.19, was made on June 15, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.19.tar.gz and
apps-6.19.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4847

This release features new support for a Network File System (NFS) client.
This feature allows a tiny, embedded MCU to mount a remote file system
exported by an NFS server and then to access the file system as it would
any local file system.  Then the tiny MCU can effectively have terabytes
of storage!

This might be useful for data collection, for MCU configuration information,
for software updates, for providing modular, loadable code modes, controlling
a "farm" of MCUs, ... there are many possibilities and opportunities for
innovation!

The NuttShell (NSH) now supports the following command:

  nfsmount <server-address> <mount-point> <remote-path>

That command will mount the remote NFS server directory <remote-path> at
<mount-point> on the target machine.  <server-address> is the IP address of
the remote server.

The NFS development was the graduation project of Jose Pablo Rojas V. who
is a student at the Instituto Tecnol<6F>gico de Costa Rica (ITCR, or TEC).
A lot of effort went into understanding what a tiny, embedded NFS client should
do and getting the target resource usage to a bare minimum.  Only around a
kilobyte or so of memory is required to run the NFS client (and most of that
for I/O buffers).  Jose Pablo has spent several months living with NFS and
should be congratulated.

Additional new features and extended functionality:

    * Drivers:  SSD1289 LCD driver, MIO283QT2 LCD driver

    * LM3S: Additional register definition header files (contributed by Max
      Neklyudov).

    * STM32 Boards:  The STM32F4Discovery will now support an SSD1289 LCD,
      The STM3220G-EVAL board support is now equivalent to the STM3240G-EVAL
      board support.

    * PIC32 Boards: The Mikroelektronika PIC32MX7 MMB board port is now
      functional, very complete, and stable.

    * Graphics:  The NxConsole will now take keyboard input from the NX graphics
      subsystem.  This means that if there are multiple NxConsole windows, only
      the top instance that has focus will receive the keyboard input.

    * apps/:  Add the capability to use an arbitrary USB device as the console
      (not necessarily /dev/console).  Additional enhancements for USB consoles.
      Added the 'mv' command.

Work in progress.  This release includes some partially completed
work that is still not ready for prime time.

    * Automated Configuration. Automated configuration based on the
      kconfig-frontends tool is being incorporated into the build
      system.  The configuration is still not complete enough for
      general use in this release.

    * STM32 Drivers. Added files that will (eventually) hold an STM32
      OTG FS host driver.  This is still a work in progress.

Bugfixes (see the change log for details) :

    * General:  sleep() and usleep() return values, sig_timedwait() errno setting
      on timeout.
    * Drivers: STMPE811 touchscreen driver, USB PLC2303, USB CDC/ACM
    * STM32: Several USB device controller driver fixes, F4 interrrupt priorities
      (contributed by Mike Smith).
    * Graphics: Keyboard input, fill trapezoid bug

As well as other, less critical bugs (see the ChangeLog for details)

NuttX-6.20
----------

The 87th release of NuttX, Version 6.20, was made on July 12, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.20.tar.gz and
apps-6.20.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r4937

Additional new features and extended functionality:

    * Power Management:  An evolving power management example is being
      created by Diego Sanchez.  This effort currently involves on the
      STM32 F1 but clearly demonstrates the NuttX power management
      system which will automatically drive the system to lower power
      usage states due to lack of use.

    * Drivers:  Added a driver for the SST 25 SPI-based FLASH parts.

    * PIC32:  Added support for the PIC32MX1 and PIC32MX2 families.
      Added support for the microchipOpen and Pinguino toolchains.

    * NXP LPC43XX: Added support for the entire LPC43xx family

    * PIC32 boards:  Added support for the DTX1-4000L "Mirtoo" module
      from http://www.dimitech.com/ (PIC32MX2).

    * NXP LPC43XX Boards: Added support for NGX LPC4330-Xplorer board.

    * NXP LPC17XX Boards: Added support for Micromint Lincoln60 board
      (LPC1769).

    * LM3S Boards:  Add a configuration to support the TI/Stellaris
      EKK-LM3S3B96 development board.  Contributed by Jose Pablo Rojas V.

    * Library:  NuttX now supports platform-specific stdarg.h header
      files.

Work in progress.  This release includes some partially completed
work that is still not ready for prime time.

    * Automated Configuration. Automated configuration based on the
      kconfig-frontends tool is being incorporated into the build
      system.  The configuration is still not complete enough for
      general use in this release.

    * STM32 Drivers. Added files that will (eventually) hold an STM32
      OTG FS host driver.  This is still a work in progress.

Bugfixes (see the change log for details) :

    * PIC32: GPIO output configuration (critical bug)
    * STM32: Typos in pin mapping files.
    * LM3S:  Fixed an optimization related but that caused slow start-up
      times if optimization was disabled.
    * Library:  Fixed signed extension but in all limit.h files
      (reported by Lorenz Meier).  inet_ntoa compilation failure
      on Z80.

As well as other, less critical bugs (see the ChangeLog for details)

NuttX-6.21
----------

The 88th release of NuttX, Version 6.21, was made on August 25, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.21.tar.gz and
apps-6.21.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r5052

Additional new features and extended functionality:

    * Core: Add support for multiple registered atexit() functions.  Syslog
      extended:  Now any character driver may be used for the debug logging
      device.  Mountpoint traversal logic.
    * Drivers: Added support for the TI PGA112-7 amplifier/multiplexor.
    * LPC43xx:  Added clock ramp-up logic to run at 204 MHz
    * LPC43xx Drivers:  SPIFI block driver, RS-485 support, Minimal termios
      support.  Framework for USB0 device controller driver.
    * LPC17xx Drivers:  Minimal termios support
    * STM32: Support for STM32 F1 "Value Line" (contributed by Mike Smith).
      Add support for STM32 F107 "Connectivity Line" (contributed by Max
      Holtzberg).
      Clock restart logic needed for recovery from low power modes.
    * STM32 Drivers:  RTC alarm support.  Usable for wakeup from sleep mode,
      Minimal serial termios support.  USB OTG FS host driver (alpha).
    * STM32 Boards: Add power management hooks for the STM32F4Discovery,
      Add support for the Olimex STM32-P107 (contributed by Max Holtzberg).
    * PIC32:  Add support for the Pinguino MIPS toolchain.
    * PIC32 Drivers:  GPIO driver now supports F1 analog regiaters (ANSEL).
    * PIC32 Boards: Add support for the PGA117 on the Mirtoo module.
    * Calypso:  Add support for the SSD1783 LCD on the Compal E99.
    * Library:  cfsetispeed(), cfsetospeed(), tcflush(), memchr(), and
      memccpy().
    * Applications:  Port of freemodbus-v1.5.0. Add support for testing
      devices with multiple ADC, PWM, and QE devices.
      NSH: NSH 'mount' command (with no arguments) will now show mounted
      volumes.  Add new NSH 'df' command.  Extended 'help' support. NSH
      now catches the return value from spawned applications (provided
      by Mike Smith).
    * Build System: mkconfig will not define CONFIG_DRAM_END.  A lot of
      progress has been made on the automated NuttX configuration logic
      (Thanks go to Richard Cochran).
    * Documentation: Document ways to customize the behavior of NSH.

Bugfixes (see the change log for details) :

    * Serial drivers (all): Fix ioctl return value. Common "upper half"
      serial driver will now return with EINTR if a serial wait is
      interrupted by a signal.
    * FAT: Fix statfs() file name length.
    * LPC43xx: Clock configuration.
    * STM32: Pinmap fixes, SPI driver re-initialization
    * STM32 Boards: Correct and lower SDIO frequency for F2 and f4 boards.
    * AVR: C++ build issues.
    * PM: Fix a place where interrupts were not be re-enabled.
    * Applications: NSH application start-up race conditions.
    * Library: Fieldwidth and justification for %s format.  Fixed several
      issues with presenting floating point numbers.  NULL definition
      for C++

As well as other, less critical bugs (see the ChangeLog for details)

NuttX-6.22
----------

The 89th release of NuttX, Version 6.22, was made on September 29, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.22.tar.gz and
apps-6.22.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r5206

Note that all SVN information has been stripped from the tarballs.  If you
need the SVN configuration, you should check out directly from SVN.  Revision
r5206 should equivalent to release 6.22 of NuttX 6.22:

    svn checkout -r5206 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Or

    svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Additional new features and extended functionality:

    * RTOS: Application entry point is no longer user_start, but can be
      configured using CONFIG_USER_ENTRYPOINT.  NuttX now supports two work
      queues:  A lower priority work queue (for extended processing) and a
      higher priority work queue (for quick, high priority operations).

    * Memory Management: Added a new granule-based allocated that can be
      used to manage, aligned and quantized DMA memory.

    * File System: Add hooks to allocate I/O memory with and external
      allocated (need if required by DMA).

    * Networking: ENC28J60 driver is (finally) verified.

    * Drivers: Add hooks USB device drivers to allocate I/O memory with and
      external allocated (need if required by DMA).  Driver for the Windbond
      SPI FLASH family (W25x16, W25x32, W25x64, and others).  ADS7843E driver
      extended for TSC2046 and XPT2046 and verified.

    * ARMv7-M: Added logic to reset the MCU using the NVIC.

    * STM32: Add support for STM32F103VET6.

    * STM32 Drivers: Add logic to re-initialize UARTs a second time to
      enable DMA (Mike Smith).  I2C driver error recovery (Mike Smith).

    * STM32 boards: Support for USB host added add to several configurations
      (or at least explained in README files).  Support for the Shenzhou
      STM32F107 board (see www.armjishu.com).  Support for M3 Wildfire
      STM32F103 board (v2 and v3).

    * Build System:  Kconfig string de-quoting logic.  Remove comments from
      defconfig files (Kate).  Add tool to create NuttX-style symbol tables.
      Numerous changes to configuration logic as needed for the new mconf-based
      configuration (much of this from Richard Cochran).  Refactor common
      Make.defs logic into tools/Config.mk (Richard Cochran).

    * Library: Configurable terse output from strerror(). Added perror() (Kate).
      Add %n format to sscanf() (Kate).

    * Applications: Numerous changes and extensions to the old uIP web server
      (from Kate and Max Holtzberg, see the ChangeLog for specific extensions).
      UDP network discovery utility (Max Holtzberg).  Embeddable Lightweight
      XML-RPC Server (http://www.drdobbs.com/web-development/an-embeddable-lightweight-xml-rpc-server/184405364, Max Holtzberg).

Bugfixes (see the change log for details).  Some of these are very important
(marked *critical*):

    * RTOS: Fixes to priority inheritance logic (*critical*).  waitpid()
      critical section.  Assertion in work_cancel() (Mike Smith).  mmap() (Kate).

    * FAT File System: Improper Boolean expression caused un-necessary writes
      and performance issues (*critical*, Ronen Vainish).

    * Networking: Remove an un-necessary delay from recvfrom().  This greatly
      improves network performance (*critical*, Max Holtzberg).

    * Graphics: NX parameter checking errors.

    * Drivers: Fix double release of memory in SDIO-based, MMC/SD driver
      (Ronen Vainish).

    * LPC17xx:  Ethernet driver fixes needed for certain PHYs (Kate).

    * AVR: Fix build error (Richard Cochran).

    * STM32: USB OTG FS host driver NAKing an retries.  Power management
      compilation errors (Diego Sanchez).  Missing SPI3 remap logic.

    * STM32 Drivers: Fix for Ethernet errata for STM32F107 (*critical*).
      Ethernet buffer alignment check.  Add "kludge" to Ethernet driver to
      handle DM9161 PHY which (at least on the Shenzhou board), sometimes
      does not come up correctly.

    * Applications: THTTPD (Kate).  NSH ping when IP address is on a different
      network (Darcy Gong).

    * Library: fread(), fflush(), fdopen(): Fix error handling logic (Ronen
      Vainish). Fix some field-width handling issues in sscanf()

As well as other, less critical bugs (see the ChangeLog for details)

NuttX-6.23
----------

The 90th release of NuttX, Version 6.23, was made on November 5, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.23.tar.gz and
apps-6.23.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r5313

Note that all SVN information has been stripped from the tarballs.  If you
need the SVN configuration, you should check out directly from SVN.  Revision
r5313 should equivalent to release 6.23 of NuttX 6.23:

    svn checkout -r5313 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Or

    svn checkout -r5313 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Additional new features and extended functionality:

    * RTOS:  If both atexit() and on_exit() are enabled, use on_exit() to
      implement atexit().  Updates for RGMP 4.0.

    * Binfmt:  Add support for loading and executing ELF binary modules from
      a file system.

    * Drivers:  Maxim MAX11802 touchscreen controller (Petteri Aimonen)

    * STM32 Driver:  Implementation of /dev/random using the STM32 Random Number
      Generator (RNG).

    * STM32 Boards:  ADC support for the Shenzhou IV board.  Relay support for
      the Shenzhou IV board.

    * C Library:  Support is now included for the add-on uClibc++ C++
      standard library support.  This includes support for iostreams, strings,
      STL, RTTI, exceptions -- the complete C++ environment.  (uClibc++ is
      provided as a separate add-on package due to licensing issues).

      Optimized generic and ARM-specific memcpy() function.  Optimized
      memset() function.

      Add support for ferror(), feof(), and clearerror().   Add support for
      __cxa_atexit().

      Math Library:  Port of the math library from Rhombus OS by Nick Johnson
      (Darcy Gong).

    * Applications: New NSH commands:  ifup, ifdown, urlencode, urldecode,
      base64enc, bas64dec, md5 (Darcy Gong).  Add support for NSH telnet login
      (Darcy Gong).  Enancements to NSH ping command to support pinging hosts
      with very long round-trip times.  Extensions to the ifconfig command
      Darcy Gong),

      Many extensions to the webclient/wget and DNS resolver logic from Darcy
      Gong.  JSON, Base64, URL encoding, and MD5 libraries contributed by Darcy
      Gong.

      New examples: ELF loader, JSON, wgetjson, cxxtest, relays.

Bugfixes (see the change log for details).  Some of these are very important
(marked *critical*):

    * Drivers: W25 SPI FLASH

    * STM32 Drivers: ADC reset

    * Graphics: Missing implementation of the blocked method (*critical*,
      Petteri Aimonen).

    * C Library: Floating point numbers in printf and related formatting functions
     (Mike Smith), cf[get|set]speed() (Mike Smith)

As well as other, less critical bugs (see the ChangeLog for details)

NuttX-6.24
----------

The 91st release of NuttX, Version 6.24, was made on December 20, 2012,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.24.tar.gz and
apps-6.24.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r5447

Note that all SVN information has been stripped from the tarballs.  If you
need the SVN configuration information, you should check out directly from
SVN.  Revision r5447 should equivalent to release 6.24 of NuttX 6.24:

    svn checkout -r5447 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Or (HTTP):

    svn checkout -r5447 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Additional new features and extended functionality:

  * RTOS:

    - Implemented the POSIX pause() function (still has some compiance
      issues).
    - Tasking logic is extended to support the notion of address
      environments.  An address environment is the key notion underlying
      "process" vs. tasks.  If tasks are created with address environments
      (by binfmt), the OS will propogate that environment to child threads
      and will destroy the address environment when the "process" exists.
    - If support for the PATH variable is enabled, the OS start up logic
      will create an initial environment containing the default PATH
      setting (CONFIG_PATH_INITIAL).  This initial PATH will then be
      inherited by all tasks.

  * Binfmt

    - The NuttX binary loaders have been updated to support the PATH
      environment variable.  Now, if the PATH is properly defined, programs
      can be executed from mass storage using only the file name.  This
      feature is added to support more standard behavior (eventually, NSH
      will support execution of programs in file systems by just entering
      the file name, perhaps in 6.25?).
    - The NXFLAT and ELF binary loaders have been extended to create
      address environments for any new tasks executed from the file system.
      This feature requires that the architecture support a memory management
      unit (MMU) and the address environment interfaces declared in
      include/nuttx/arch.h (currently, this is only supported by the z180).

    * Drivers: LCD driver for the Univision UG-2864AMBAG01 OLED

    * STM32: Support for STM32F100 high density chips contributed by Freddie
      Chopin.

    * STM32 Drivers:  Added optional RS-485 direction bit control (from
      Freddie Chopin).

    * STM32 Boards:

      - Support for generic STM32F100RC board contributed by Freddie Chopin.
      - stm32f4discovery/nxlines: STM32F4Discovery support for the
        UG-2864AMBAG01 OLED.
      - stm32f4discovery/winbuild:  A version of the NuttX OS test
        configured to build natively on Windows.
      - stm32f4discovery/elf: Now uses the PATH variable to find ELF
        executables.
      - configs/cloudctrl: Added for Darcy Gong's CloudController board

    * PIC32 Boards: Update the Mirtool configuration for Release 2 of the
      Mirtoo module.

    * Calypso: Add Calypso keypad driver.  From Denis Cariki.

    * ZiLOG:

      - Add support for the z180 chip family and, specifically, for
        the P112 retro hardware (see http://p112.feedle.net/).
      - All ZiLOG configurations updated to use the current ZDS-II
        and/or SDCC toolchains.

    * Graphics:

      - Add a semaphore handshake so that operations on buffers from
        the NXMU client will be blocked until the NX server operates on the
        buffer data (from Petteri Aimonen).
      - nxtk_subwindowmove() and nxtk_getwindow(): Improvements to clipping
        logic from Petteri Aimonen.

    * C Library: lib/ sub-directory renamed libc/ (there is a new lib/ sub-
      directory that is used to hold all archives).

    * C++: Exception stubs from Petteri Aimonen.

    * Applications:

      - Add NSH hexdump command to dump the contents of a file (or character
        device) to the console (contributed by Petteri Aimonen).
      - Extend the NSH ifconfig command plus various DHCPC improvements
        (from Darcy Gong).

    * apps/examples:

      - ostest: Replace large tables with algorithmic prime number
        generation.  This allows the roundrobin test to run on platforms
        with minimal SRAM (Freddie Chopin).
      - keypadtest:  A new keypad test example contributed by Denis Carikli.
      - elf and nxflat:  If CONFIG_BINFMT_EXEPATH is defined, these examples
        will now use a relative path to the program and expect the binfmt/
        logic to find the absolute path to the program using the PATH
        variable.

    * Build system:

      - New top-level Makefiles: Makefile.unix and Makefile.win (along with
        numerous changes to other make-related files).  This adds basic
        support for building NuttX natively under Windows from a CMD.exe
        window (rather than in a POSIX-like environment). This build: (1)
        Uses all Windows style paths, (2) Uses primarily Windows batch
        commands from cmd.exe, with (3) a few extensions from GNUWin32.

        This capability should still be considered a work in progress
        because: (1) it has not been verfied on all targets and tools,
        and (2) still lacks some of the creature-comforts of the more
        mature environments (like a function configure.sh script and
        'make menuconfig' support).

      - Example Windows native builds for STM32F4Discovery, eZ80, z16f, z8,
        Z80, and Z180.
      - Several configurations have been converted to work the kconfig-
        frontends mconf configuration tool: stm32f4discovery/nxlines, and
        all eZ80, z16f, z8, Z80, and Z180 configurations.
      - Architectures now include a common Toolchain.defs file that can be
        used to manage toolchains in a more configurable way (most of this
        contributed by Mike Smith).

    * Build tools:

      - Renamed tools/winlink.sh to tools/copydir.sh.
      - Several new tools/scripts to support the Windows native build:
        tools/mkdeps.bat, tools/mkdeps.c, tools/link.bat, unlink.bat, and
        copydir.bat.
      - tools/incdir.sh and incdir.bat now support an -s option to generate
        system header file paths.
      - tools/b16.c: Fixed precision math conversion utility.

Bugfixes (see the change log for details).  Some of these are very important
(marked *critical*):

    * RTOS: Fix some backward conditional compilation in the work queue
      logic (Freddie Chopin).

    * File System: Uninitialized variable caused assertions (from Lorenz
      Meier).

    * Drivers: Partial fix for STM32 OTGFS device drivers and fix for short,
      unaligned writes in the flash translation layer (drivers/mtd/ftl.c),
      both from Petteri Aimonen.

    * STM32 Drivers:

      - Qencoder driver and TIM3 driver fixes from Ryan Sundberg.
      - Fix timeout delay calculation in the STM32 OTG FS host driver.

    * LPC17xx Drivers:  Resources not being properly released when I2C
      driver is un-initialized.

    * Graphics:

      - Fix logic when the mouse drags outside of the window; fix
        another "blocked message" handling case (both from Petteri Aimonen).
      - nxtk_filltrapwindow():  Correct an offset problem (also from Peterri
        Aimonen).
      - nxglib_splitline():  Correct the "fat flat line" bug.

    * C Library:

      - nrand() changes to prevent coefficients from becoming zero which
        would "lock up" the random number generate.
      - Add rounding functions to the math library (contributed by Petteri
        Aimonen).

    * Build system:  Changes to MIN definitions in all limit.h header files
      to avoid integer overflows.  For example from (-128) to (-127 - 1)
      (from Petteri Aimonen).

    * Applications: Modbus fixes from Freddie Chopin.

As well as other, less critical bugs (see the ChangeLog for details)

NuttX-6.25
----------

The 92nd release of NuttX, Version 6.25, was made on February 1, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.25.tar.gz and
apps-6.25.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r5595

Note that all SVN information has been stripped from the tarballs.  If you
need the SVN configuration information, you should check out directly from
SVN.  Revision r5595 should equivalent to release 6.25 of NuttX:

    svn checkout -r5595 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Or (HTTP):

    svn checkout -r5595 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Additional new features and extended functionality:

    * OS Initialization

      - Removed support for CONFIG_BUILTIN_APP_START.  This is not really a
        useful feature and creates a violation of the OS layered
        architecture.

    * Task Creation:

      - Implement a simple vfork().  In NuttX-6.25, this interface is
        available only for ARM7/9, ARMv7-M (Cortext-M3/4), and MIPS32
        (PIC32MX) platforms.
      - exec() now sets the priority of the new task to the same priority as
        the parent task (instead of the arbirtrary value of 50).
      - New, partially complient implementations of execv() and execl().
        These are only partially compliant because they do not overlay any
        existing "process space" but rather create the new task and exit().
      - Add a complete implementation of posix_spawn().  This standard
        interface is a better match for an MMU-less architecture than are
        vfork() plus execv() or execl().
      - Add a task start hook that will be called before the task main
        is started.  This can be used, for example, to schedule C++
        static constructors to run automatically in the context of the
        new task.

    * Task Parentage

      - Repartitioned tasking data structures.  All shared resources are now
        collected together in a "task group".  A task group includes the
        original task plus all of the pthreads created by the task.
      - Added support for remember the parent "task group" when a new task is
        started.
      - Added optional support to record the membership of each thread in
        the "task group".
      - Implement support for retaining child task status in the "task group"
        after the child task exists.  This is behavior required by POSIX.
        But in NuttX is only enabled with CONFIG_SCHED_HAVE_PARENT and
        CONFIG_SCHED_CHILD_STATUS
      - Add internal logic to "reparent" a task.  This is useful,
        for example, where the child task is created through a trampoline
        task that redirects I/O.  Reparenting allows the caller of posix_spawn()
        to be reparented for the eventual child thread.
      - Added support for SIGCHLD.  Sent to all members of the parent task
        group when the file member of the child task group exits.
      - If SIGCHLD and retention of child task exist status are enabled, then
        a more spec-compliant version of waitpid() is enabled.
      - New interfaces waitid() and wait() are also enabled when SIGCHLD
        is enabled.

    * File System

      - dup() and dup2() can new be used with opened files in a mounted file
        system.  This supports re-direction of output in NSH to files.
      - The binfs file system was moved from apps/builtin to fs/binfs.  The
        binfs file system was extended to support execution of "builtin
        applications" using exec(), execv(), execl(), or posix_spawn().
      - Added logic based on SIGCHLD to automatically unload and clean-up
        after running a task that was loaded into memory.

    * Binary Formats

      - Much of the logic for "builtin applications" was moved from
        apps/builtin to nuttx/binfmt/libbuiltin.  Includes some extensions
        contributed by Mike Smith.
      - A binary loader was added for builtin applications to support
        execution of "builtin applications" using exec(), execv(),
        execl(), or posix_spawn().

    * Drivers:

      - Added logic to marshal and serialized "out-of-band" keyboard
        commands (such as cursor controls and key release events) intermixed
        with normal ASCII keypress data.  The encoding is partially integrated
        in the HID keyboard driver and the decoding full integrated into the
        apps/examples hidkbd and keypadtest (the latter contributed by Denis
        Carlikli).
      - Driver for the UG-2864HSWEG01 OLED contributed by Darcy Gong.
      - Add support for removable serial devices (like USB serial).  This
        support is enabled by CONFIG_SERIAL_REMOVABLE.

    * ARMv7-M:

      - Added an option to use the BASEPRI register to disable interrupts
        (instead of the PRIMASK).  This eliminates some innocuous hardfaults
        that interfere with some debug tools.  You need to switch to the
        BASEPRI method only if you have such tool interference.

    * STM32 Drivers

      - Bring STM32 F1 DMA capabilities up to par with the STM32 F2/F4
        (contributed by Mike Smith).
      - Add support for USART single wire mode (Contributed by the PX4
        team).
      - Updates to support for SPI DMA on the STM32 F1/F2/F4.  From
        Petteri Aimonen.

    * STM32 Boards:

      - New configuration to support the UG-2864HSWEG01 OLED on the
        STM32F4Discovery board.
      - Added a posix_spawn() test configuration for the STM32F4Discovery.

    * LM3S/LM4F

       - Files and directories repartitioned to support both LM3S and LM4F
         using the STM32 organization as a model.
       - Partial definitions for the LM4F contributed by Jose Pablo Carballo
         (this is still a work in progress).

    * LM3S Boards

       - Added scripts and documentation to use OpenOCD with the LM3S (from
         Jose Pablo Carballo).

    * LPC176x/LPC178x

       - Files and directories repartitioned to support both LPC175x/LPC176x
         and the LPC177x/LPC178x families using the STM32 organization as a
         model.  The LPC1788 port is a work in progress by Rommel Marcelo.

    * LPC176x/LPC178x Boards:

      - Added a configuration to support the Wave Share Open1788 board.
        This is still a work in progress by Rommel Marcelo.

    * LPC2148 Boards:

      - Add basic support for the The0.net ZP213x/4xPA board (with the LPC2148
        and the UG_2864AMBAG01 OLED).
      - Add an nxlines configuration for the ZP213x/4xPA (with the LPC2148
        and the UG_2864AMBAG01).

    * Simulator:

      - Add an nxlines configuration for the simulator.

    * Networking:

      - Add logic to work around delayed ACKs by splitting packets
        (contributed by Yan T.).
      - Split net_poll() to create the internal interface psock_poll().

    * LCDs:

      - Added support for LCD1602 alphanumeric LCD (HD4468OU controller).

    * Graphics:

      - Added 5x8 monospace font. This tiny font is useful for graph
        labels and for small bitmapped display.  Contributed by Petteri
        Aimonen.

    * Build System:

      - Add an options to better manage toolchain prefixes.
      - Redesigned how the context targer works in the apps/ directory.
        The old design caused lots of problems when changing configurations
        because there is no easy way to get the system to rebuild the
        context.  This change should solve most the problems and eliminate
        questions like "Why don't I see my builtin application in NSH?"

    * Kconfig Files:

      - There are several new configurations that use the kconfig-frontends
        tools and several older configurations that have been converted to
        use these tools.  There is still a long way to go before the conversion
        is complete:

        configs/sim/nxwm
        configs/sim/nsh
        configs/stm3220g-eval/nxwm
        configs/stm32f4discovery/posix_spawn
        configs/olimex-lpc1766stk/nsh
        configs/olimex-lpc1766stk/hidkbd
        configs/olimex-lpc1766stk/nettest
        configs/open1788/ostest
        configs/stm32f4discovery/nsh
        configs/stm32f4discovery/usbnsh
        configs/lm326965-ek (all configurations)
        configs/mcu123-214x/nsh
        configs/ubw32/ostest

    * Tools:

      - tools/kconfig.bat:  Kludge to run kconfig-frontends from a DOS shell.
      - tools/configure.c:  configure.c can be used to build a work-alike
        program as a replacement for configure.sh.  This work-alike
        program would be used in environments that do not support Bash
        scripting (such as the Windows native environment).
      - tools/configure.bat: configure.bat is a small Windows batch
        file that can be used as a replacement for configure.sh in a
        Windows native environment.  configure.bat is actually just a
        thin layer that executes configure.exe if it is available. If
        configure.exe is not available, then configure.bat will attempt
        to build it first.

    * Applications:

      - New and modified examples:

        apps/examples/wlan: Remove non-functional example.
        apps/examples/ostest: Added a test of vfork(). Extend signal
          handler test to catch death-of-child signals (SIGCHLD). Add a
          test for waitpid(), waitid(), and wait().
        apps/exampes/posix_spawn: Added a test of posix_spawn().

      - NSH:

        NSH now supports re-direction of I/O to files (but still not from).
        The block driver source argument to the mount command is now
          optional for file systems that do not require a block driver.
        NSH can now execute a program from a file system using posix_spawn().
        Added support for a login script.  The init.d/rcS script will be
          executed once when NSH starts; the .nshrc script will be executed
          for each session:  Once for serial, once for each USB connection,
          once for each Telnet session.

      - Supports a new daemon that can be used to monitor USB trace outpout.
      - Removed non-functional wlan example.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Tasking:

      - Fixed a *critical* task exit bug.  Here is the failure scenario:
        (1) sched_lock() is called increments the lockcount on the current
        TCB (i.e., the one at the head of the ready to run list), (2)
        sched_mergepending is called which may change the task at the head
        of the ready-to-run list, then (3) sched_unlock() is called which
        decrements the lockcount on the wrong TCB.  The failure case that
        I saw was that pre-emption got disabled in the IDLE thread, locking
        up the whole system.

    * Signals:

      - sigtimedwait() would return a bad signal number if the signal was
        already pending when the function was called.

    * Drivers:

      - Some SD cards will appear busy until switched to SPI mode for
        first time.  Having a pull-up resistor on MISO may avoid this
        problem, but this fix from Petteri Aimonen makes it work also
        without pull-up.

    * STM32 Drivers:

      - STM32 FLASH driver counting error (from Freddie Chopin).
      - STM32 F4 maximum SPI frequency was wrong (corrected by Petteri
        Aimonen).

    * STM32 Boards

      - Due to cloning of untested code, the logic to control on-board
        LEDs did not work on any STM32 boards.
      - Serial devices number /dev/ttyS0-5 is there is a serial console,
        but /dev/ttyS1-6 if there is no serial console.

    * Binary Formats

      - C++ static constructors execute now using a start taskhook
        so that they execute in the context of the child task (instead
        of in the context of the parent task).

    * File Systems:

      - Several FAT-related bugs fixed by Petteri Aimonen.

    * Networking:

      - Fix poll/select issure reported by Qiang: poll_interrupt() must call
        net_lostconnection() when a loss of connection is reported.  Otherwise,
        the system will not remember that the connection has been lost and will
        hang waiting on a unconnected socket later.
      - Similar issues corrected for recvfrom() and send().
      - Telnetd would hang in a loop if recv() ever returned a value <= 0.

    * Libraries:

      - fread() could hang on certain error conditions.
      - Can't handle SYSLOG output to a character device from  the IDLE task
        (because the IDLE task can't block).

    * Build System:

      - Serial was driver was not being built if there is no console
        device.  Obviously, the serial driver may be needed even in
        this case.

    * Additional Bugfixes:

      - sig_timedwait() and clock_time2ticks.c: Timing "rounding" logic
      - ARM9 Compilation issue with low vectors.
      - readline() return value
      - Others as detailed in the ChangeLog: HID keyboard, LPC17xx bit
        definitions, strndup(), PL2303, SYSLOG error handling, AT25,
        apps/examples.

NuttX-6.26
----------

The 93rd release of NuttX, Version 6.26, was made on March 15, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.26.tar.gz and
apps-6.26.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

This release corresponds with SVN release number: r5745

Note that all SVN information has been stripped from the tarballs.  If you
need the SVN configuration information, you should check out directly from
SVN.  Revision r5745 should equivalent to release 6.26 of NuttX:

    svn checkout -r5745 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Or (HTTP):

    svn checkout -r5745 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code

Additional new features and extended functionality:

    * OS Initialization:

      - Add an additional call-out to support board-specific driver
        initialization during the boot-up phase (available with
        CONFIG_BOARD_INITIALIZE=y).

    * Tasking:

      - New interface task_spawn() that is like posix_spawn(), but uses
        entry point addresses like task_create().
      - Additional data restructuring as a continuation of the task group
        changes of NuttX 6.25.  These data structures were moved from the
        TCB structure into the task group:  pthread join data,
        atexit/on_exit callbacks, waitpid data structures, and message
        queues.
      - TCBs for tasks and pthreads are now separate structures.  This
        saves a little memory since tasks do not have to carry the overhead
        for threads and vice versa.

    * Kernel Build:

      - Extensive changes were made to support the kernel build mode.  In
        this mode, NuttX is built as a monolithic kernel.  NuttX is built
        as a separate kernel mode "blob" and the applications are built
        as a separate user mode "blob".  The kernel runs in kernel mode and
        the applications run in user mode (with the MPU restricting user
        mode accesses).  Access to the kernel from the user blob is only
        via system calls (SVCalls).
      - Extensive changes were made to the syscall, SVCall, and trapping
        logic.  Many internal interfaces were renamed.
      - The memory manager was extended to support both kernel- and user-
        mode allocations.  Logic within the kernel needs to use the
        correct kernel- or user-space allocator, depending upon the user
        of the allocated memory.
      - The user-space blob now contains a header built in at the beginning
        of the block that provides the same information that was previously
        provided by a kludgy, auto-generated header file (user_map.h).
      - Basic support implemented for the ARMv7-M family with fragments
        also implemetned for the ARMv6-M and MIPS32 families.
      - Kernel build supported added for the LPC17xx Open1788 and for
        the Atmel SAM3U-EK board.  All testing is being performed on the
        Open1788 board.

    * Signals:

      - Delivery of signals to threads within a task group is now compatible
        with the way that signals are delivered to threads within a process.

    * Drivers:

      - Add a driver for the SST29VF NOR FLASH parts.
      - USB device trace/debug feature extended to decode device-specific
        trace events to make the trace output more readable (from Petteri
        Aimonen).
      - USB MSC device driver can not support names of differing sizes
        in the USB descriptor and the SCSI fields (from Petteri Aimonen).
      - Locking added to MMC/SD SPI drivers so that MMC/SD can co-exist on
        the same bus as other SPI devices.  Frequency is reset each time
        that the MMC/SD SPI has the bus locked. (from Petteri Aimonen).

    * ARMv6-M (Cortex-M0):

       - Added support for the ARM Cortex-M0 family.

    * nuvoTon NUC120:

       - Added support for the nuvoTon NUC120 MCU (Cortex-M0).

    * nuvoTon NUC120 Boards:

       - Added basic support for the nuvoTon NuTiny-SDK-NUC120 board (Cortex-M0).

    * LPC17xx:

      - Added support for the LPC177x and LPC178x families.  Most of this is
        the work of Rommel Marcelo.

    * LPC17xx Boards:

      - Added support for Zilogic System's ARM development Kit, ZKIT-ARM-1769.
        From Rashid.
      - The port for the WaveShare Open1788 board is now functional.  Basic
        OS test and NuttShell (NSH) configurations are functional. More
        driver development and testing is needed (from Rommel Marcelo).

    * LPC17xx Drivers:

      - Added an SD card MSI driver for the LPC178x.  The driver is marginally
        functional but requires DMA capability to be reliable.

    * STM32

      - Support extended to handle the STM32 F3 family (Cortex-M4 with F1-like
        peripherals).

    * STM32 Boards

      - Added support the STMicro STM32F3Discovery board (STM32 F3).

    * Stellaris LM3S/LM4F

      - Basic support for the LM4F120 family is in place, but untested (mostly
        from Jose Pablo Carballo).

    * Stellaris LM4F Boards

      - Add support for the LM4F120 LaunchPad (untested).

    * Networking:

      - select() should now allocate a little less memory.

    * Memory Management:

      - Extended to support multiple heaps.  This is used as part of
        the kernel build in order to support separater user- and
        kernel-mode heaps.
      - The stand-alone memory manger test had to be removed.  It
        was too entangled and made extension of the memory manager
        nearly impossible.  This is a loss.

    * Build System:

      - Several configurations converted to use the kconfig-frontends
        configuration tool.  There are still many more that need to
        be converted.

    * C Library:

      - Move the workqueue logic into the C library.  There is now a
        special user-space version of the work queue (which will only
        be used with a NuttX kernel build).
      - Implementation of itoa() contributed by Ryan Sundberg.

    * Applications:

      - The NSH builtin task logic now uses task_spawn() to start builtin
        applications.
      - The OS test now includes a test cased to verify task_restart().

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  Most are expected to be fully
available in NuttX 6.27.

    * LM4F120 LaunchPad port.  Code is in place, but nothing has been tested.

    * WaveShare Open1788 port.  This port as actually complete and
      functional. However, there is still ongoing development and
      testing of drivers.

    * Kernel Build.  Much progress has been made, but there kernel build is
      not yet fully functional due to several user resources that are not yet
      properly disentangled from the kernel blob.

    * Conversion of old configurations to use the kconfig-frontends
      tool is an ongoing effort that will continue for some time.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Tasking:

      - The wrong PID was being signalled with SIGCHILD.  It should be
        the PID of the task that create the task group, not the ID of
        the last thread to leave the task group.
      - Added logic so that some internal resources and states are recovered
        when tasks are deleted or restarted.  Handle cases where there are
        outstanding timed events pending when tasks are deleted or restarted.

    * ARMv7-M:

      - Several fixes to the MPU control logic.

    * Drivers:

      - Removable serial drivers race conditions fixed.
      - MAX11802 timing bug (from Petteri Aimonen).

    * STM32 Drivers:

      - Handle cases were SPI DMA logic fails if sem_wait is awakened
        by a signal.  Need to clear error flags to prevent corruption of
        subsequent transfers.  Also, bit count should not be changed while
        the SPI peripheral is enabled (from Petteri Aimonen).
      - Fixes to the OTG FS device driver from Petteri Aimonen.
      - Fix typos in DMA register header file (from Yan T.)

    * Graphics:

      - Correction to the hyphen in the SANS 17x22 font (from Petteri
        Aimonen).

    * Networking:

      - Corrected errors in the socket poll/select logic.  Additional
        state logic was needed to detect if the socket is still connected
        before starting the poll wait. (bug reported by Qiang Yu).

    * Memory Management:

      - mallinfo() should hold the memory manager semaphore (from Petteri
        Aimonen.

    * Build System:

      - Resolved several build errors reported by Mike Smith.

    * Applications:

      - Fixed an NSH memory leak:  Needed to detach after creating each
        pthread.
      - readline() now returns EOF on any failure (instead of a negated
        errno value).  This is because the underlying read is based on
        logic similar to getc.  The value zero  (meaning end-of-file)
        was being confused with a NUL.  So if a NUL was received, the
        NSH session would terminate because it thought it was the end of
        file.

NuttX-6.27
----------

The 94th release of NuttX, Version 6.27, was made on April 28, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.27.tar.gz and
apps-6.27.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * OS Initialization:

      - Add missing registration of /dev/zero.  Registration of /dev/null
        should depend upon conditional compilation.  From Ken Pettit.

    * Tasking:

      - Added a new interface to set aside memory on the task's stack.  This
        is used (at least in the kernel build) to hold task arguments.
      - Remove up_assert_code().  One assertion routine is enough.

    * Kernel Build:

      - Extensive changes were made to support the kernel build mode.  In
        this mode, NuttX is built as a monolithic kernel.  NuttX is built
        as a separate kernel mode "blob" and the applications are built
        as a separate user mode "blob".  The kernel runs in kernel mode and
        the applications run in user mode (with the MPU restricting user
        mode accesses).  Access to the kernel from the user blob is only
        via system calls (SVCalls).
      - Kernel build configurations for the Open1788 board and for the
        STM32F4Discovery now execute correctly.
      - Changes were made to task and thread start-up routines, signal
        handling, data structures, ARMv7-M SVCalls, stack management
        interfaces,

    * Drivers:

      - Driver for the ST7567 LCD Display Module from Univision Technology
        Inc.  Contributed by Manikandan.S
      - SPI initialize functions renamed so that multiple SPI blocks can
        be initialized.
      - Extended to support the RAMTRON FM25V01 device. Contributed by
        Lorenz Meier
      - Serial drivers: TIOCSERGSTRUCT ioctls now conditioned on
        CONFIG_SERIAL_TIOCSERGSTRUCT

    * ARMv7-M (Cortex-M3/4):

      - Added support for modifiable interrupt vectors in RAM

    * nuvoTon NUC1xx:

      - Added kernel build support

    * Freescale Kinetis:

      - Add kernel build support
      - Add support for the Kinetis L family of Cortex-M0+ MCUs.  Contributed
        by Alan Carvalho de Assis.

    * LPC17xx:

      - Now holds off sleep mode in the IDLE loop is DMA is in progress
        (because sleep mode will disable CPU SRAM).

    * LPC17xx Boards:

      - ZKIT-ARM-1769:  Now supports the ST7567 LCD display module.  Added
        an nxhello configuration for testing (Manikandan.S).
      - ZKIT-ARM-1769:  Add support for both CAN1 and CAN2.  Contributed by
        M.Kannan

      - Open1788: Basic support for the WaveShare Open1788 board is complete
        with working OS test, NSH, and graphics configurations.
      - Open1788: Integrated the LPC178x LCD driver with the WaveShare display.
        Touchscreen support is included, howerver, there appears to be an
        issue with the Open1788 touchscreen interrupt signal.
      - Open1788:  Now supports SDRAM (used to provide the LCD framebuffer).
      - Open 1788: Reversed sense of the IDLE LCD. It is now off when the
        LPC17 is sleeping and on when awake.  That is much a better visual
        indication of the dynamic CPU load

    * LPC17xx Drivers:

      - Added an LCD framebuffer driver for the LPC177x/8x family.
      - Implemented LPC17xx GPDMA support.
      - Integrated the LPC17xx GPDMA support into the SD card driver.
      - SSP driver adapted to work with the LPC178x family.
      - Separate LPC176x and LPC178x GPIO logic; this logic is too different
        to maintain in one file with conditional compilation.
      - Re-design of the GPIO logic for the LPC178x family by Rommel Marcelo.

    * LPC43xx:

      - Added kernel build support

    * STM32:

      - Added support for kernel mode build.
      - Added architecure support for the STM32 F427/F437 chips. Contributed
        by Mike Smith

    * STM32 Boards:

      - Added a configuration to support a kernel mode build of the OS test
        on the STM32F4Discovery

    * Stellaris LM3S/LM4F:

      - Added kernel build support
      - Added support for the 7 UARTs on the LM4F120

    * Stellaris LM4F Boards:

      - Added scripts and instructions to simplify use of OpenOCD with ICDI
        (JP Carballo)
      - The basic for the Stellaris LM4F120 Launchpad is complete.  This
        includes support for OS test and NSH configurations.  Additional
        driver development is needed.

    * Build System:

      - Directories where the same sources files are used to build different
        objects in the first and second pass kernel builds need to keep those
        objects in separate directories so that they are not constantly
        rebuilt.

    * Applications:

      - apps/system/ramtest:  Add a simple memory test that can be built
        as an NSH command.

    * Tools:

      - kconfig2html is a new tool which will replace the hand-generated
        documentation of the NuttX configruation variables with auto-
        generated documentation.

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  Most are expected to be fully
available in NuttX 6.28.

    * A port to the Freescale Freedom KL25Z is complete but not yet stable
      enough.  The KL25Z is a low-cost Cortex-M0+ part with 128KB of FLASH
      and 16KB of SRAM.  This is is the effort of Alan Carvalho de Assis.

    * Conversion of old configurations to use the kconfig-frontends
      tool is an ongoing effort that will continue for some time.
      At this time, only 32% of the configurations have been converted
      to use the kconfig-frontends tools.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Tasking:

     - Fixed a critical bug:  When there is pending C buffered output
       and the system is very busy, the a pthread may be blocked at
       a critical point when trying to exit.  Blocking at this critical
       point would cause crashes.  All entire task/thread exit logic
       paths were reviewed and failsafe mechanisms were put in place
       to assure that exitting tasks never block after task teardown
       has been started.

    * ARMv6-M:

      - Fixed parameter passing for all system call inline functions with > 3
        parameters
      - Fixed a major problem:  The Cortex-M0 has no BASEPRI register but the
        logic of NuttX-6.26 was using it to manage interrupts.  Switch to
        using the PRIMASK instead.  This means that hardfaults will (again)
        occur when SVC instructions are executed

    * ARMv7-M:

      - Corrected Correct MPU sub-region settings for unaligned regions.
      - In exception handling with CONFIG_NUTTX_KERNEL, need to explicitly
        set and clear the privilege bit in the CONTROL
      - Fixed parameter passing for all system call inline functions with > 3
        parameters

    * Drivers:

      - Support for O_NONBLOCK was not supported in the "upper half"
        serial driver.
      - PL2303 compilation errors

    * Stellaris LM3S/4F:

      - Corrected typos in alternate function definitions.

    * LPC17xx Drivers:

      - Added a work-around for an ADC errata.  From Chris Taglia
      - Only one ADC pin was configured. Need to configure all that
        are in the ADC0 set.  From MKannan

    * File Systems:

      - The FAT logic was not making a distinction between directory
        non-existence and file non-existence so when it you try to
        create a file in a non-existent directory, it would create a
        file with the name of the missing directory.  Reported by Andrew
        Tridgell
      - Several fixes to the FAT file system from Ronen Vainish.  These
        fixes mostly involve the logic to extend directory clusters for
        the case of long file names but also include a few important
        general fixes (such as for storing 32 bit FAT values)
      - mkfatfs was writing the boot code to the wrong location.  From
        Petteri Aimonen

    * Networking:

      - Fixed a compilation error when socket options are are disabled.
        Reported by Daniel O'Connor

    * C Library:

      - Corrected an error in sscanf.  If %n occurs in the format statement
        after the input data stream has been fully parsed, the %n format
        specifier will not be handled.  Reported by Lorenz Meier
      - strchr(str, '\0') should return a pointer to the end of the string,
        not NULL.  From Petteri Aimonen

    * Build System:

      - Fix naming of NuttX target if EXEEXT is defined.

    * Applications:

      - OS test: Fix timing error in non-cancelable thread test.
      - NSH: Correct the test of the skip input parameter.  Was limiting the
        range to <= count.  From Ken Petit.

NuttX-6.28
----------

The 95th release of NuttX, Version 6.28, was made on June 14, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.28.tar.gz and
apps-6.28.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * File Systems:

      - SMART FLASH file system (contributed by Add Ken Pettit).

    * MTD (FLASH) Drivers:

      - Add support of MTD partitions via a new MTD driver that manages a
        set of MTD devices, each managing a subset of the FLASH region
        managed by the parent MTD driver.
      - Extended the MTD interface to provide an (optional) method to
        perform byte oriented writes if supported by the FLASH part.
      - M25Px driver re-architected to use the byte write capability (when
        possible) and to use 4KB sectors for the erase block size when the
        part supports it (from Ken Pettit).

    * LCD Drivers:

      - New interface definitions to support audio devices (from Ken Pettit)
        and alphanumeric, segment LCDs.

    * Wireless Drivers:

      - Added new driver for the wireless nRF24L01+ transceiver (from
        Laurent Latil).

    * Calypso:

      - Added support for the Pirelli DP-L10 phone (from Craig Comstock via
        Alan Alan Carvalho de Assis)

    * STM32:

      - Added an option to conditionally disable the "wfi" sleep mode.  This
        is needed with certain JTAG debuggers to to prevent the debug
        session from begin disconnected (from Ken Pettit).
      - Added support for the STM32L (STM32L15X/STM32L16x) family.
      - Added STM32F103C4 and F103C8 chip support (from Laurent Latil).
      - Added a new interface function, stm32_dmacapable() that can be used
        to determine if DMA is possible from the specified memory address
        (from Petteri Aimonen)

    * STM32 Drivers:

      - If CONFIG_STM32_DMACAPABLE is defined, the STM32 SPI driver now uses
        stm32_dmacapable() to determine if it is possible to perform DMA
        from the specified address.  This change is important for the STM32
        F4 which may have SPI data buffers allocated on the stack in CCM
        memory which cannot support the DMA (from Petteri Aimonen).

    * STM32 Boards:

      - Support added for the MikroElektronika Mikromedia for STM32F4
        development board (from Ken Pettit) with the MIO283QT2 LCD and
        touchscreen.  Several graphics configurations are included.
      - The HY-mini STM32v board now uses the common SSD1289 driver
        and supported the card detect interrupt.  Several new
        configurations also added and some removed (from Laurent Latil).
      - Support added for the R65105-based LCD that comes with some
        HY-Mini STM32v boards (from Christian Faure).
      - Added basic support for the STM32L-Discovery board.  Drivers
        for the on-board segment LCD are included.
      - Added support for the STM32 Tiny development board based on the
        STM32 F103C8T6 MCU.  This includes support for the nRF24L01+
        wireless on the board (from Laurent Latil).

    * Stellaris LM3S/LM4F:

      - Support added for a TI/Stellaris internal FLASH MTD driver (from Max
        Holtzberg).

    * Stellaris LM4F Boards:

      - The LM3S6965-EK now has configurations for the UDP discovery tool and
        for the TCP echo server (both from Max Holtzberg)

    * Atmel ATSAM3/4:

      - Reorganized, renamed, and updated directory structure to better
        support additional members of the SAM3/4 family.
      - Added support for both the ATSAM4S and ATSAM4L families.  The
        ATSAM4S is similar to the ATSAM3U, but the ATSAM4L is quite a
        different beast, really much more akin to the AVR32s SoCs but
        with a Cortex-M4.

    * Atmel ATSAM3/4 Boards:

      - Added support for the Atmel SAM4L Xplained Pro development board.
        This board features the ATSAM4LC4C MCU (Cortex-M4 with 256KB FLASH +
        32KB SRAM).
      - Added support for the Atmel SAM4S Xplained developement board.  This
        board features the ATSAM4S16C MCU (Cortex-M4 with 1MB FLASH + 128KB
        SRAM).

    * PIC32MX Boards:

      - Added support for the 1602 segment LCD on-board the Sure PIC32MX
        board.  This board will now also support a USB NuttX console and
        the USB monitor test program.

    * Build System:

      - Clean-up of almost all .gitignore files:  Made scope of ignore to be
        only the current directory; Ignore .dSYM files in directories where
        .exe's may be built.  Also, in Makefiles, clean .dSYM files in
        directories where an .exe may be built.
      - Standardize and consolidated all build-as-an-NSH-application
        configuration settings.  Now only CONFIG_NSH_BUILTIN_APPS is
        sufficient to build an application, test, or or example as an NSH
        builtin application.
      - Added support for a generic ARM, ARMv6-M and ARMv7-M Windows EABI
        toolchains.

    * Libraries:

      - Added encoder/decoder logic to marshal and serialize special segment
        LCD (SLCD) commands intermixed with normal ASCII data.  This is the
        similar to the encoding/decoding logic that is used to marshal
        special commands from a keyboard.
      - Add dprintf() and vdprintf() (the latter from Andrew Tridgell).
      - Add an application that may be built as an NSH builtin command that
        will erase FLASH using a flash_eraseall NSH command (from Ken Pettit).

    * Applications:

      - Added an MTD partition test/examples.  Currently used with (1) the a
        simulation configuration to test MTD partitions on a RAM emulation
        of FLASH and (2) with the Mikroe STM32F4 configuration.
      - Added a test/example to verify alphanumeric, segment LCDs.
      - Added a simple single threaded, poll based  TCP echo server based
        on W. Richard Stevens UNIX Network Programming Book (from Max
        Holtzberg).
      - Added several tests of the SMART block driver and file system (from
        Ken Pettit).
      - Added a runtime configuration for the UDP discover utility (from
        Max Holtzberg).
      - Added an example application to demo the nRF24L01 driver (from
        Laurent Latil).
      - New and modified NSH commands:
        Added a -h option to the df command to show the volume information
        in human readable form (from Ken Petit).
        Add a new mksmartfs command (from Ken Petit).

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  Most are expected to be fully
available in NuttX 6.28.

    * Audio System:

      - A complete audio subsystem include CODECs, higher level management,
        interface definitions, and audio drivers was contributed by Ken
        Pettit.  This work has not been completely verified as of this
        release and so is categorized as a work-in-progress.  At present,
        progress is blocked due to issues interfacing with the VS1053
        audio DAC on the Mikroe STM32F4 board.

    * kconfig-fronted Configuration:

    -  Conversion of old configurations to use the kconfig-frontends
       tool is an ongoing effort that will continue for some time.
       At this time, only 43% of the configurations have been converted
       to use the kconfig-frontends tools.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Tasking:

      - Modify assertion in the priority inheritance logic that is reported
        to cause false alarm assertions.

    * Kernel Build:

      - Typo in syscall proxying logic corrected by Ken Pettit.

    * Networking:

      - Poll setup/teardown logic should ignore invalid (i.e., negative)
        file descriptors (from Max Holtzberg).
      - When readahead data is available, the network poll() logic should
        set POLLIN (or POLLRDNORM), not POLLOUT (from Max Holtzberg).

    * LCD Drivers:

      - Correct power controls in the MIO283QT2 LCD driver.

    * USB Device Controller Drivers:

      - Change the default IN request buffer size from 64 to 96.  This will
        avoid requests of exactly MAXPACKET size and, hence, avoid so many
        NULL packets.  Also, fix the OUT request buffers size to exactly the
        max packet size.  It really cannot be any other size.

    * STM32 Drivers:

      - Correct some bad STM32 F1 DMA definitions that crept into the system
        a few months ago a broke STM32 F1 DMA (from Laurent Latil)
      - Fixed an error in NULL packet handling in the STM32 F1 USB device
        controller driver:  If the NULL-packet needed flag ever got set,
        then it was not being cleared and infinite NULL packets resulted.
        This only affects the CDC/ACM class and was the cause of the
        failures using the USB CDC/ACM device as a NuttX console.  With this
        change the USB works well as an alternative NuttX console device for
        the STM32 F1 family.
      - Correct some bad condition compilation in the RCC logic (CONFIG_
        missing from setting names).  This affects some STM32 FLASH pre-
        fetch settings (from Lorenz Meier).
      - Change for hardware flow control support for STM32. The change also
        fixes incorrect operation of USART2 and UART5 in current master
        (from Lorenz Meier and Mike Smith).
      - Fixed a backward conditional in USB OTG FS host controller driver
        that prevented detection of disconnection events (from Scott).

    * LPC17xx Drivers:

      - I2C interrupt control.  Also correction for a single byte read
        timeout error (from M. Kannan).

    * Freescale Kinetis:

      - Freedom KL25Z pin multiplexing and LED control corrections (from
        Alan Carvalho de Assis)

    * PIC32MX:

     - Fix NULL packet handling in the PIC32 USB device driver.  Without
       this fix the CDC/ACM driver cannot be used reliably with the PIC32
       USB.  With this change the USB works well as an alternative NuttX
       console device.

    * Graphics:

      - Default priorities for NxWidget and NxWM threads should be 100,
        not 50, to be consistent with other default priorities.

    * Applications:

      - Remove the CONFIG_EXAMPLES_NXTEXT_NOGETRUN option from the NXTEXT
        example.  The test logic was bad for the case where this options is
        not selected.  Also, completed the empty Kconfig file.
      - C++ name mangling was occurring when this example is built as an NSH
        built-in application causing the entry to be undefined when called
        from C code.
      - Add some missing NSH library configuration values (from Lorenz
        Meier).

NuttX-6.29
----------

The 96th release of NuttX, Version 6.29, was made on July 31, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.29.tar.gz and
apps-6.29.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * Drivers:

      - Generalized the SSD1306 driver and added support UG-2832HSWEG04
        which is very similar to the existing support for the
        UG-2864HSWEG01.
      - Added support for a generic bit-bang SPI driver.  This includes
        both a common "upper half" driver as well as a platformp-specific
        "lower half" dirvers based on a common "template."

    * ARMv7-A, Cortex-A5

      - Added support for the ARMv7-A architecture and the Cortex-A5 in particular.

    * ARMv7-M, Cortex-M3/4

      - Modified how some registers are copied during a context switch (with
        lazy FPU register saving).  This should save some context switching
        time when the context switch is due to interrupt level processing.

    * STM32:

      - Added support for a separate CCM heap.  This may be useful for
        segregating allocations for CCM (which cannot be used for DMA)
        from other allocations (that may be used used for DMA).

    * STM32 Drivers:

      - DAC: Added support for DAC DMA (contributed by John Wharington).
      - I2C: An I2C driver for the STM32 F3 family (from John Wharington).

    * Atmel AT91 SAM/4:

      - Add support for SAM3X and SAM3A chips

    * Atmel AT91 SAM/4 Drivers:

      - Re-architect the SAM3/4 SPI driver so that is it compatible with the
        SPI drivers of other MCUs.
      - Added register definition file for the SAM4L LCD peripheral.
      - Added SAM4L PDCA register definition file

    * Atmel AT91 SAM/4 Boards:

      - SAM4L-Xplained: Added support for the SPI-based SD card on the I/O1
        module.
      - SAM4L-Xplained: Added a driver for the LED1 segment LCD module.
      - SAM4L-Xplained: Added support for the UG-2832HSWEG04 OLED on the
        SAM4L Xplained Pro's OLED1 module
      - SAM4S-Xplained: Added support for on-board 1MB SRAM
      - Arduino Due:  Basic support for the Arduino Due (SAM3X) is now
        included.
      - SAM3U-EK:  The touchscreen is now functional.

    * Atmel AT91 SAMA5D3

      - Added support for the Atmel AT91SAMA5D3 Cortex-A5 chip family.

    * Atmel AT91 SAMA5D3 Boards

      - Added support for the Atmel SAMA5D3x-EK boards which use the AT9
        SAMA5D3x chips (x=1,3,4,5).

    * Freescale KL25Z Drivers

      - Freescale KL25Z TSI register definitions and example TSI driver for
        the Freedom KL25Z board from Alan Carvalho de Assis.
      - Added SPI driver and register definitions for the Freescale KL25Z.
      - Added a framework for controlling SPI-related discrete inputs and
        outputs.  Taken from work by Alan Carvalho de Assis

    * Build System:

      - New sub-directories to hold SPI-related files:  includes/nuttx/spi.h
        moved to include/nuttx/spi/.; SPI-related Kconfig info moved from
        drivers/Kconfig to drivers/spi/kconfig.
      - Finally... I changed the naming of configuration variables like
        CONFIG_DRAM_ to CONFIG_RAM_.  This has bothered me for a long time
        since most boards don't have DRAM.  The more generic RAM naming
        should not produce so much cognitive dissonance

    * Libraries:

      - Added CRC16 support.

    * Applications:

      - Added Zmodem file transfer support.  This may be used as an embedded
        library or may be built as 'sz' and 'rz' commands that can be
        executed from NSH.
      - C++ initializers should be set once and, preferably, in the context
        of the task that uses any C++ statically initialized classes.  This
        only becomes an issue if cxxtest or helloxx are built as NSH builtin
        applications.  Then you want the initialization done in cxxtext or
        helloxx and not in NSH (and certainly not twice).  Added
        configuration options to control who does the C++ initialization.
        NSH now does not do C++ initialization be default and must be
        configured to do otherwise.  Conversely, cxxtest and helloxx
        will always do C++ initialization unless configured do otherwise.
      - examples/cxxtext:  Add ostream test as provided by Michael.
      - NSH:  Added a 'cmp' command that can be used to compare two files
        for equivalence.  Returns an indication if the files differ.
        Contributed by Andrew Tridgell (via Lorenz Meier).

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  They are not likely be be
completed soon.

    * Audio System:

      - A complete audio subsystem include CODECs, higher level management,
        interface definitions, and audio drivers was contributed by Ken
        Pettit.  This work has not been completely verified as of this
        release and so is categorized as a work-in-progress.  At present,
        progress is blocked due to issues interfacing with the VS1053
        audio DAC on the Mikroe STM32F4 board.

    * kconfig-fronted Configuration:

    -  Conversion of old configurations to use the kconfig-frontends
       tool is an ongoing effort that will continue for some time.
       At this time, only 45% of the configurations have been converted
       to use the kconfig-frontends tools.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * File Systems:

      - Fixed compilation error if no file systems are enabled: Change
        error to ERROR.
      - Read-Ahead/Write buffering: Correct typos that can cause failures
        in some configurations (From Chia Cheng Tsao).

    * Drivers

      - Remove the wait for the touchscreen busy bit in the ADS7843E driver.
        From my reading of the ADS7843 spec, it would not be appropriate to
        wait for the BUSY bit to de-asserted anyway (since it is only de-
        asserted when we read the data).  Most boards do not even bother to
        provide the BUSY bit.
      - MMC/SD SPI based driver:  Driver needs to make sure that the SPI
        mode and data width are correct.
      - ENC28J60:  Change buffer ordering to work around Errata.  From Dave
        (ziggurat29).

    * USB Device Controller Drivers:

      - Fixed a typo in the composite device driver unitialization logic.
        DEV1 should be DEV2 in one case.
      - usbdev.h: Fix some typos that cause compiler errors when
        CONFIG_USBDEV_DMA and CONFIG_USBDEV_DMAMEMORY are selected (From
        Chia Cheng Tsao).

    * ARM9:

      - Fix a bug (uninitialized register error) that crept in the ARM9
        boot-up code several years ago.  Obviously no one has used the
        ARM9 NuttX port for years!

    * STM32 Drivers:

      - Fix STM32 OTF FS endpoint allocation logic.  Apparently the same
        endpoint can be allocated as both an IN or an OUT endpoint.  The
        existing implementation only supported one allocation, either IN or
        OUT.  This resulted in failures to allocate endpoints when used with
        the CDC/ACM + MSC composite driver (From Chia Cheng Tsao).
      - SDIO: Add support for the data block end (DBCKEND) interrupt to
        terminate transfers (From Chia Cheng Tsao).
      - DAC: Fixed numerous DAC driver errors and added support for DAC
        DMA (contributed by John Wharington).

    * SAM3/4:

      - SAM4S: Correct configuration of PIO pins for SAM4S B and C peripherals.
      - Need to disable write protection before configuring PIO pins.
      - GPIO configuration logic must protect against re-entrancy.
      - Clocking must be applied to the SMC module for the 3X and 3A family in
        order for the NFC SRAM to be functional.
      - Fixed some errors for interrupts on ports D-F.

    * SAM3/4 Drivers:

      - Common SPI driver: Fix SPI mode setting.  In the SAM3/4 family, the
        clock phase control (CPHA) is inverted (NPHA).  Also fixed an
        incorrect pointer test.  Was checking if the wrong pointer was NULL.

    * SAM3/4 Boards:

      - SAM3U-EK: Fix polarity of the /PENIRQ signal (it is active low).
        The SAM3U-EK board now runs at 96MHz.

    * Applications:

      - apps/examples/nxhello:  Minor fix for compilation error when the
        display resolution is low (< 8bpp) due to a typo that has been there
        for a long time.  Also Correct default colors when in Y1 code mode.
      - apps/system/ramtest:  The RAM test was not correctly built
        into the configuration and build system.
      - apps/examples/composite: Change to prevent some false alarm debug
        assertions (From Chia Cheng Tao).

NuttX-6.30
----------

The 97th release of NuttX, Version 6.30, was made on September 14, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.30.tar.gz and
apps-6.30.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * Common Drivers:

      - Extended TERMIOS support for serial and CDC/ACM drivers.  From
        Mike Smith, Andrew Tridgell and Lorenz Meier.
      - Added option to disable serial port reordering.  From Lorenz Meier.
      - Several changes to the USB host control interface and extensions to
        common USB host logic to handle host controllers with multiple
        downstream ports in the root hub.
      - USB device tracing: Extended decoding and stringifying of USB trace
        output to include trace output from class drivers.
      - USB host tracing:  Added support for USB host tracing similar in
        some ways to USB device tracing:  Stringification is an inherent
        part of the trace decoding (not an option).  Only available in the
        SAMA5 USB host drivers now.

    * Networking / Network Drivers

      - Support for the Microchip ENCX24J600 Ethernet driver from Max
        Holtzberg
      - CC3000 Networking.  Initial support for the TI CC3000 network
        module on the Freescale Freedom-KL25Z board from Alan Carvalho
        de Assis.  This is still a work in progress.

    * ARMv7-A, Cortex-A5

      - Restructured some MMU-related logic and header files.
      - Hooks added for Cortex-A8, but not yet used.

    * STM32 Drivers:

      - STM32 SPI: nbits() interface extended to control bit order as well
        as bit width (from Teemu Pirinen)

    * STM32 Boards

      - Olimex STM32-P107:  Incorporate ENCX24J600 networking for the Olimex
        STM32 P107 board.
      - LeafLabs Maple Board:  Add board support for the LeafLabs Maple and
        Maple Mini boards.  From Librae.

    * Atmel AT91 SAMA5D3x

      - Added support for the SAMA5 DMAC controllers.
      - DMA-capable drivers for the SAMA5 SPI peripherals.
      - DMA-capable HSCMCI 0/1/2 drivers.
      - Support for PIO interrupts
      - Utilities for intelligent conversions between physical and virtual
        addresses.
      - Added USB host controller drivers for both the OHCI (low- and full-
        speed) peripheral and the ECHI (high-speed) peripheral.
      - Added USB device controller for the SAMA5 UDPHS peripheral (full-
        and high-speed).
      - Added a Two Wire (TWI) driver.  This is a variant of I2C.

    * Atmel AT91 SAMA5D3x-EK Development Boards

      - Now supports onboard SDRAM.  Modified heap initialization logic
        to include SDRAM if configured.
      - Integrated a FAT file system on the on-board SPI-based AT25 serial
        FLASH
      - Integrated HSMCI0 and HSMCI1 support for the microSD and full file
        SD card slots.  Includes PIO interrupts for card detection events.
      - Integrated USB OHCI and ECHI host and high-speed peripheral support.
        File system on AT25 now exported via Mass Storage Class.  Includes
        PIO VBUS controls.
      - Integrated the TWI driver and the I2C tool.  Added support for an
        external AT24 serial EEPROM.

    * Applications:

      - apps/examples/cc3000.  Initial support for the TI CC3000 network
        module on the Freescale Freedom-KL25Z board from Alan Carvalho de
        Assis. Includes the test to verify the CC3000.
      - apps/examples/usbmsc:  apps/examples/usbstorage renamed usbmsc for
        consistency. Change submitted by CCTSAO.
      - apps/system/usbmonitor:  The USB monitor has been extended so that
        it can be used with USB device or host trace data.

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  They are not likely be be
completed soon.

    * CC3000 Networking

      - CC3000 Networking.  Initial support for the TI CC3000 network
        module on the Freescale Freedom-KL25Z board from Alan Carvalho
        de Assis.  This is still a work in progress.

    * kconfig-fronted Configuration:

      - Conversion of old configurations to use the kconfig-frontends
        tool is an ongoing effort that will continue for some time.
        At this time, only 46% of the configurations have been converted
        to use the kconfig-frontends tools.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * File Systems:

      - ROMFS: Fix an error where long (>15) file names were read
        incorrectly from a ROMFS file system.  From Mike Smith
      - NXFFS: Clean up some compiler warnings.

    * Common Drivers

      - MMC/SD driver: Correction for a bad return value when multiple
        block SDIO transfers are suppressed.  By Andrew Tridgell.
      - USB HID keyboard and mass storage host-side class drivers:  Fix some
        compilation errors and warnings when pre-allocated data structures
        are used.
      - USB device-side class drivers:  Fix some compilations errors when
        DUALSPEED (i.e., full- and high-sped) support is enabled.
      - CDC/ACM and PL2303: Don't use max packetsize assigned to the endpoint
        when allocating request buffers; The default value of the endpoint
        max packetsize may be incorrect because the endpoint has not yet
        been configured.  Really only an issue for high-speed endpoints.
      - USB Host Mast Storage Class:  Fixed a problem that was causing some
        devices to fail to initialize: If device is returning fatal transfer
        errors while attempting to initialize, don't bother with the startup
        retries; abort immediately so that the device will be reset and we
        can try again with a better ready device.
      - USB Host Mast Storage Class:  Correct a reference counting error:
        When an MSC device transfer fails while waiting for UnitTestReady,
        the reference count on the class was not being decremented.  The end
        result is a memory leak as can be seen by the USB device numbers
        incrementing: sda, sdb, sdc, ...
      - USB Device CDC/ACM:  Fix backward conditional compilation in the
        CDC/ACM driver with regard to remote wakeup and self-powered
        capabilities.  From the PX4 team via Lorenz Meier,

    * Networking / Network Drivers

      - ARP IP harvesting:  Correct backward condition in netmask task.
        From Max Holtzberg.
      - Network connection monitor: Fixes a race condition where a loss of
        connection may not be detected when the connection is lost before it
        has been accepted (from Max Holtzberg).
      - TCP/IP Backlog:  Fix a critical bug in the TCP/IP backlog
        initialization:  Only the first backlog buffer was getting added to
        the free list.  From Max Holtzberg.
      - ENC28J60:  Fixes and improvements back-ported from the ENCX24J600
        to the ENC28J60 by Max Holtzberg.

    * STM32 Drivers:

      - STM32 I2C fixes for the STM32 F3 family from John Wharington.
      - STM32 I2C Correct an error that crept into the STM32 F1 I2C
        driver with some recent changes.  From Librae
      - STM32 F4: Added some missing CONFIG_SERIAL_TERMIOS support; Fixed
        some STM32 F4 Timer 8 pin configurations.  From CCTSAO.
      - STM32 SDIO: If CONFIG_SDIO_BLOCKSETUP defined, OS would crash.  Now
        Generate an error if CONFIG_SDIO_BLOCKSETUP is defined; that
        option is not yet supported by the STM32 SDIO driver.  From CCTSAO
      - STM32 I2C Timers: Some CCER bit settings changed. Submitted by
        CCCTSAO.
      - STM32 CAN: Fix access to CAN filter registers.  From the PX4 team
        via Lorenz Meier.
      - STM32 Kconfig: Fix STM32 UART7/8 Kconfig names and UART DMA.  From
        the PX4 team via Lorenz Meier.

    * LPC17xx Drivers

      - Fix #endif with missing #if in USB host header file.  Reported
        by Andrew Bradford,

    * SAM3/4 Boards:

      - Corrected DMA-related problems: Bad register definitions, parameters
        reversed in a function call.
      - Correct a race condition in the HSMCI driver when an interrupt
        occurs before the wait for the interrupt begins.
      - Peripheral clock setup:  Correct a typo in a register name.

    * Atmel AT91 SAMA5D3

      - Order of some operations changed in boot-up logic to defer
        enabling of caching of memory regions until SDRAM is initialized.
      - Correct handling of spurious interrupts.

    * Freescale KL25Z Drivers

      - KL25Z SPI: Correct typo in name of a function.  From Alan Carvalho
        de Assis.

    * Applications:

      - apps/examples/composite:  Fix a typo that can cause a configuration
        error.  From CCTSAO.
      - apps/examples/pwm:  Clean-up some configuration confusion.
      - apps/netutils/dhcpd/dhcpd.c:  Fixed calculation of the next lease
        address.  From Paolo Messina.
      - apps/examples/usbmsc:  Don't try to control USB trace if we are
        an NSH built-in task.  In that case our attempts are inadequate
        and only interfere with with other logic that is attempting to
        to do the same thing (in NSH or in the USB monitor).
      - apps/examples/usbmsc:  IMPORTANT bug fix: Change how the msconn
        works.  Because of recent changes the msconn command was hanging.
        This was because the USB MSC start-up logic creates a pthread;
        Now waitpid() will wait until all members of the task group
        exit.  So NSH was hanging in waitpid when msconn started even
        though msconn returned.  The USB MSC logic really should not use
        a pthread, but we are stuck with that for now.  The work-around
        is the msconn now daemonizes itself so that it so that the pthread
        is created in a different task group.
      - apps/nshlib:  Fix NSH listing output for the case of a single file.
        From the PX4 team; provided by Lorenz Meier.

NuttX-6.31
----------

The 98th release of NuttX, Version 6.31, was made on October 28, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.31.tar.gz and
apps-6.31.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * General:

      - Standardized stack checking logic so the interfaces can be used
        by common stack monitoring logic.

    * Audio Subsystem and Audio Drivers:

      - Ken Pettit has finally released his long awaited audio subsystem.
        This is a generic audio subsystem that is appropriate for the
        deeply embedded MCU.  Current testing has, however, been focused
        on the VS1053 CODEC chip.
      - Ken Pettit's VS1053 audio CODEC driver is now functional.

    * Networking / Network Drivers

      - Add the prefix ETH0 to all PHY configuration selections.  This
        will allow us to support to Ethernet MAC drivers with two different
        PHYs (identified with ETH0 and ETH1).  Enabled with CONFIG_NETDEV_MULTINIC.
      - Add MII/RMII PHY definitions for the Micrel KSZ8051 PHY.
      - Add GMII/GRMII PHY definitions for the Micrel KSZ9021/31 PHY.
      - New network-optimized, higher-performance sendfile() implementation
        from Max Holtzberg.
      - Added a simple routing table.  This table is currenly only used (1)
        when we need to look-up an Ethernet device based on an IP address,
        and (2) in the ARP logic when we need to request the MAC address of
        the router, vs the MAC address of the peer.
      - Make net_close() nonblocking and free unestablished connections if
        no free connections available.  From Max Holtzberg.
      - Changed the meaning of the uip_*input functions. They now return
        success when a packet is dropped; This is needed for the ENCX24J600
        driver that must make a decision to return the packet or not:  It
        should not retry dropped packets. From Max Holtzberg.
      - David Sidrane has completed integration of the CC3000 networking.
        This is much more than a network driver:  It is a complete
        replacement for the NuttX networking with off-chip networking support
        in the CC3000.
      - Numerous enhancements to the ENCX24J600 driver from Max Holtberg.

    * Other Common Drivers:

      - The SST25 serial FLASH MTD driver now includes support for the
        SST25VF016B.  From David Sidrane.
      - Add a preflight method to the SDIO interface to support the STM32
        DMA usage model. From Mike Smith.
      - Enhanced the MMC/SD SDIO driver to perform DMA preflight operations
        and fail DMA read/write requests that fail preflighting. From Mike
        Smith.
      - Add an ioctl command that can be used to trigger ADC/DAC conversion
        under application control.

    * File Systems:

      - Enhanced the FAT32 filesystem code to understand DMA preflight
        failures, and to use the file sector buffer as a bounce buffer when
        a user-supplied buffer is not suitable for DMA. From Mike Smith.

    * Atmel AT91 SAMA5D3x

      - Add support so that subsets of the total DRAM (and other external
        memory) can be added to the heap, leaving other memory reserved for
        other purposes (like the LCDC framebuffers).

    * Atmel AT91 SAMA5D3x Drivers:

      - Use more descriptive task names when starting the EHCI and OHCI
        monitor tasks.
      - Added a 10/100Base-T Ethernet (EMAC) driver.
      - Added a 1000Base-T Ethernet (GMAC) driver.
      - Added a Real Time Clock (RTC) driver and integrated with the NuttX
        system time logic.
      - Added support for /dev/random using the SAMA5D3x True Random Number
        Generator (TRNG).
      - Added a Watchdog Timer (WDT) driver.
      - Added a Timer/Counter (TC) library with interface that make be used
        by other drivers that need timer support.
      - Added an ADC driver that can collect multiple samples using the
        sequencer, can be trigger by a timer/counter, and supports DMA data
        transfers.
      - Added a touchscreen driver based on the special features of the
        SAMA5D3 ADC peripheral.
      - Added an LCD controller (LCDC) frame buffer driver.
      - Added a CAN driver.  However, testing has been delayed because of
        cabling issues.
      - Basic header file support is available for the Image Sensor
        Interface (ISI) camera interface.  Work on the camera driver is
        underway and is expected in the next release.

    * Atmel AT91 SAMA5D3x-EK Development Boards

      - Add OS test support for the FPU test.
      - Enable the task name feature board configuration sto provide
        prettier ps command output.
      - Added NX and NxWM configurations to verify the LCD and touchscreen.
        There are still some outstanding issues with the NxWM configuration
        as of this release.
      - The TRNG and /dev/random are now enabled by default in the demo
        configuration.

    * Atmel AT91 SAM3/4 Boards:

      - Add configuration to select revision 3 of the Arduino Due which has
        some small but important differences.  Suggested by gdi@embedders.org.

    * STMicro STM32:

      - Add support for the STM32F207ZE chip. From Martin Lederhilger.

    * STMicro STM32 Boards:

      - Add configuration for the Spark Core.  The initial check-in is
        basically the Maple Mini board and subsequent development by David
        Sidrane is his special Spark emulation hardware.  The configuration
        should be very mature when actual Spark hardware is available.
      - Support for the Olimex STM32 P207 board added by Martin Lederhilger.
      - Configuration for the Mikroe STM32F4 board configuration updated for
        audio support by Ken Pettit.

    * NXP LPC17xx Boards:

      - zkit-arm-1769:  LED1 is now user controllable after booting. From
        Rashid Fatah.

    * Kinetis KL Drivers:

      - PIT and TPM register definitions header files for the from Alan
        Carvalho de Assis.
      - Added low-level getc() function for operation with no file system.
        The KL25Z can now support NSH in a very minimal system that does
        not even have a file system.

    * Kinetis KL Boards

      - A new configuration called minnsh was added is an experiement to
        see how small we can get the NuttX footprint and still support NSH.
        From Alan Carvalho de Assis..

    * TI Calypso Phones:

      - Basic board support for the Motorola C139 (Compal E86) phone.  From
        Craig Comstock.

    * Applications:

      - Moved several useful examples from apps/examples to apps/system.
        This includes USB MSC, USB CDC/ACM, and USB Composite.
      - New addroute and delroute commands added to NSH in order to manage
        the network routing table.
      - Numerous enhancements and updates to the CC3000 example from David
        Sidrane.
      - Add a new stack monitor daemon that can be used to constantly
        monitor stack usage by all threads.
      - Numerous changes to get NSH working with no file system.  Basically
        this suppresses I/O redirection and replaces file I/O with calls to
        low-level console read/write functions.  Suggested by Alan Carvalho
        de Assis.
      - apps/system/nxplayer: A new, command-line media player called
        'nxplayer' from Ken Pettit.
      - apps/examples/random:  Add a simple test that dumps values from
        /dev/random.
      - apps/examples/adc:  Add support so that a ADC driven by software
        triggering can be tested.

    * Build System:

      - The MKDEP tools now support a new argument that identifies the
        object file path.

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  They are not likely be be
completed soon.

    * kconfig-fronted Configuration:

      - Conversion of old configurations to use the kconfig-frontends
        tool is an ongoing effort that will continue for some time.
        At this time, only 48% of the configurations have been converted
        to use the kconfig-frontends tools.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Initialzation and Scheduling:

      - IDLE thread initialization logic should not call group_setupidlefiles()
        if there are no file descriptors (and, hence, no file system).
      - Fix some cornercase error handling logic:  If sched_releasetcb() is
        called as part of a failed pthread startup before the flags field in
        the TCB has been initialized, then a crash occurs. Pointed out by
        David Sidrane.

    * Networking / Network Drivers:

      - Look up of a device using subnet will fail if the packet is being
        sent out of our subnet (via a router). The fallback here is just to
        use the only device ("eth0") if the subnet lookup fails (this logic
        was extended to handle multiple Ethernet devices by adding a simple
        routing table).
      - Fix some backward conditional logic in send() that enabled the
        check if the ARP address is in the ARP table.  From Max Holtzberg.
      - Notify the socket layer from the network monitor if a connection is
        lost before the monitoring callback has been registered.  From Max
        Holtzberg.
      - send():  Reset the send timeout when the data is ACKed, not when the
        data is sent.  Remove conditions on checking for timeout.  From Max
        Holtzberg.
      - Correct how the TCP/IP initial minimum MSS is calculated. Max
        Holtzberg.
      - TCP state machine: Move tcp connection into SYN_RCVD state after
        aception instead of bypassing and moving directly into ESTABLISHED.
        From Max Holtzberg.
      - Numerous fixes to the ENCX24J600 driver from Max Holtberg.

    * USB Drivers:

      - Change naming of SELFPOWERED and REMOTEWAKEUP to avoid name
        collisions.  Prepend the name of the driver (for example
        CDCACM_SELFPOWERED).
      - CDC/ACM class driver:  Change the interval for the interrupt
        endpoint from 0xff (invalid) to 10.  This is not a critical
        change but will avoid a complaint from the Linux driver when
        it overrides the 0xff value.

    * ARM Cortex-A5:

      - Fix an error in data cache clean and invalidate functions: Fix of
        addresses to cache line boundaries.

    * Atmel AT91 SAMA5D3x Drivers:

      - Correct some inconsistencies in the way that USB configuration
        settings are used.  This caused compilation errors in SAMA5 OHCI
        when USB debug was ON but USB host tracing was off.
      - When 480MHz UPLL is used to drive OHCI, it should have a divider
        of 10.  However, that does not work.  A divider of 5 does.  Why?.
      - OHCI HCD: Fix a place where DMA-related data needed to be flushed
        to data cache; Fix another where a virtual address was being used
        in a register where a physical address was required.
      - HSMCI Driver: TX DMA disabled.  It is just not reliable. No idea
        why.  RX DMA is still used.
      - STM32F103C pinmapping corrections from David Sidrane.

    * Atmel SAMA5D3x-EK Board

      - Increase the number of pre-allocated watchdog timers.  The default
        number of 4 was easily being exhausted in the more complex
        configurations.

    * STMicro STM32:

      - STM32 F4 DMA definitions: Typo fixes for UART7 and UART8 DMA
        configs.  From Mike Smith.
      - DMA priority configuration corrections from Mike Smith.
      - Changes to the stm32_dmacapable API. In order to correctly
        verify that a buffer can be transferred, the transfer count and
        the CCR value are required.  Implemented stm32_dmacapable for
        stm32f1xx devices. Enhanced stm32_dmacapable for stm32f2xx and
        stm32f4xx devices to check for additional conditions that will cause
        DMA to fail or lose data.
      - STM32 F1 DMA fix from David Sidrane: The DMA_CNDTRx register
        cannot be modified if the DMA channel is disabled.

    * STMicro STM32 Drivers:

      - Fix compilation errors from bad bit definitions in ADC and PWM
        register.  From Martin Lederhilger.
      - DMA-related fixes to the SPI driver from Ken Pettit.

    * NXP LPC17xx Drivers:

      - Remove undefined spi_select() prototype.  This was causing compile
        time warnings.

    * NXP LPC17xx Boards:

      - zkit-arm-1768:  MMC/SD is on SPI, not SSP0.  From Rashid Fatah.

    * C Library

      - scanf() fixes from kfrolov: 1) sscanf() function hangs in the
        following example: sscanf("2", "%u,%u,%u,%u", ...), 2) sscanf()
        returns incorrect number of parsed numbers if some arguments
        can't be parsed: sscanf("=2", "%u,%u,%u,%u",...)==1 instead of
        0, and 3) using of char* instead of const char* in vsscanf
        function leads to warnings from GCC.

    * Build System

      - Dependency generation generation was broken for directories that
        keep objects in a sub-directory.  The MKDEP tools now support a new
        argument that identifies the object file path.
      - tools/define.sh:  'cut' no longer works as it once did.  Script
        adapted to observed behavior.

    * Applications:

      - Remove a warning from the NSH library when DHCP is not enabled.
      - Default NSH IP address should be 0x0a000001 (10.0.0.1), not
        0xa0000001 (160.0.0.1).  Ditto for the gateway.
      - Add some missing options to the OS test Kconfig file
      - Fix some bad conditional compilation in the USB monitor.
      - Fix default I2C frequency used by the I2C tool:  400KHz instead
        of 4MHz.  Suggested by Max Kriegleder.
      - Increase stack size for the system/info command. Ken Petit
        reports that this simple command can exceed its 768 stack size
        under certain conditions.  The size is marginal and has been
        increased to 1024 by default but is also now configurable.
      - apps/Makefile:  Needs to include external/Make.defs if we want
        allow external applications to participate in the NuttX
        configuration.  Suggested by gdi@embedders.org.
      - apps/netutils/telnetd:  Missing argument to debug statement
        can cause crashes in certain error conditions. From David
        Sidrane.
      - apps/examples/can:  Correct an error in a debug statement.  From
        Martin Lederhilger.

NuttX-6.32
----------

The 99th release of NuttX, Version 6.32, was made on December 7, 2013,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.32.tar.gz and
apps-6.32.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * General:

      - Extension and standardization of stack debug logic.  Now includes
        coloration of the IDLE and interrupt stacks as well as the heap.
        Suggested by David Sidrane.

    * Audio Subsystem and Audio Drivers:

      - I2S interface definition.  Integrates with audio sub-system.
      - VS1053 worker thread stack size is now configurable and assigned a
        name via pthread_setname_np(). From Ken Pettit.

    * Networking / Network Drivers

      - Updates and adaptations to support for TI CC3000 wireless module
        from David Sidrane.  These updates include multi-threading support
        and interface and header file changes to integrate more seamlessly
        with NuttX applications.

    * File Systems:

      - procfs:  Add support for a tiny procfs file system.  The initial
        offering is little more that a proof of concept but may be developed
        further in subsequent releases.
      - NXFFS:  An initial attempt was made to integrate NXFFS with the NAND
        MTD driver.  Changes were made to handle bad blocks.  However, I
        later realized that NXFFS cannot handle NAND because the way that
        is re-writes blocks is incompatible with the NAND ECC handling.
        These changes were backed-out so as not to introduce turmoil, but
        can be re-enabled if needed via configuration option.
      - NXFFS: Make the start up scan of the media a configuration option.
        It just takes to long and is not really necessary!  Those rare cases
        where the scan was helpful can be fixed using flash_eraseall().

    * General Drivers:

      - I2S:  A simple character driver was added to support I2S accesses.
        This driver in its current state is intended only to support I2C
        testing and would not be appropriate to used for any real driver
        application.

    * MTD Drivers

      - Add a container for an MTD device that can be used to provide a
        simple, lightweight interface to configuration data storage that
        resides on some storage media that is wrapped as an MTD device.
        From Ken Pettit.
      - New interface definition for lower half NAND drivers.
      - MTD Nand:  Add MTD NAND driver that will support ONFI devices,
        non-ONFI devices (via table lookup), bad block checking, software
        ECC (Hamming), and will interact with the lower-half, hardware-
        specific, NAND driver.  Based on BSD-compatible Atmel sample code.
      - MTD geometry structure is now packed so that it can support larger
        erase block sizes needed by NAND without increasing the size of
        the geometry structure.
      - SST25:  Add another SST25 SerialFlash driver, sst25xx.c.  This one
        differs from sst25.c in that it supports larger SST25 parts:  In
        the larger parts support page write instead of byte/word writes
        like the smaller parts.  From Ken Pettit.

    * USB Drivers

      - STM32 F1 USB Device: Add support for decoded USB trace strings.
        From David Sidrane.

    * ARM

      - Add more ARM9 cache management functions to flush and invalidate
        D-Cache for DMA support.

    * Atmel AT91 SAMA5D3x Drivers:

      - Many new drivers including CAN, PWM, SSC/I2S
      - PCK:  Add support for programmable clock outputs.
      - NAND: Driver with hardware ECC and DMA support

    * Atmel AT91 SAMA5D3x Boards:

      - SAMA5D3x-EK: Add support for the apps/examples/i2schar test.
      - SAMA5D3x-EK: Provides board-specific memory controller initialize
        for NAND flash.
      - SAMA5D3x-EK: Add support for "auto-mounting" NAND MTD block driver
        or NXFFS file system.

    * Atmel AT91 SAM3/4 Boards:

      - Basic support for the Atmel SAM4E family.  From Mitko.

    * STMicro STM32:

      - Added support for the STM32F429.  From Ken Pettit.
      - Added support for GPIOK and GPIOJ.  From Ken Pettit.

    * STMicro STM32 Drivers

      - STM32 F4 OTG FS/HS Device:  OTG FS device and host drivers extended
        so that they can support either the OTG FS peripheral or the OTG HS
        peripheral (in FS mode).  This was done as a quick way to get USB
        support on the STM32F429 which has only OTG HS.  From Ken Pettit.
      - Added header files and driver framework for the STM32F429 LTDC
        framebuffer driver.  From Ken Pettit.

    * STMicro STM32 Boards:

      - Support for the Spark board was completely by Davide Sidrane.  The
        Spark configuration includes integrated CC3000 wireless support, FAT
        file system on the SerialFlash and a composite device that can be
        used both to export the FAT file system and to provide a serial
        interface.
      - The Mikroe-stm32f4 now uses /dev/config for configuration data
        storage.  From Ken Pettit.
      - Added support for the STM32F429I-Discovery board from Ken Pettit.
      - Added board support for the ViewTool STM32F103/F107 board with the
        STM32F107VCT6 installed.

    * NXP LPC31xx Drivers:

      - USB ECHI HCD:  Add a driver for the low-/full-/high-speed variant
        of the EHCI host controller.

    * NXP LPC31xx Boards:

      - Board-specific USB host support for the Emedded Artists EA3131 board.
        (Missing PCA9532 controls).
      - Add support for the Olimex LPC-H3131 board.  Including USB host
        support (which does not depend on the PCA8532 interface).

    * Kinetis KL Drivers:

      - PWM driver for the Freescale Kinetis KL family from Alan Carvalho
        de Assis.

    * Kinetis KL Boards

      - Freedom-KL25Z:  Add PWM support from Alan Carvalho de Assis.

    * TI Stellaris LM3S

      - Don't initialize .data in start-up logic if not running from FLASH.

    * Applications:

      - apps/platform:  A new home for platform-specific application code.
      - Define a common interface that can be used to manage platform-
        specific configuration data.  From Ken Pettit.
      - apps/examples/configdata:  A unit test for the MTD configuration
        data driver from Ken Pettit.
      - Aapps/platform/mikroe-stm32f4: dd platform-specific storage of
        configuration data for the Mikroe-stm32f4.  From Ken Pettit.
      - apps/examples/cc3000: Fine tuning of memory usage from David Sidrane.
      - apps/system/nxplayer: Play thread stack size is now configurable.
        All NxPlayer threads now have names assigned via pthread_setname_np().
        From Ken Pettit.
      - apps/examples/i2schar:  The I2S test based on the I2S character
        driver.
      - apps/examples/hidkbd/hidkbd_main.c:  Now calls a function named
        arch_usbhost_initialize() that must be provided by the platform-
        specific code.
      - NSH:

          - hexdump:  Add skip= and count= options to the hexdump command.  From Ken Pettit.
          - Allow USB trace without a USB console. From David Sidrane.
          - Mount command updates from Ken Pettit.
          - Add an option to the mkfatfs command to specify FAT12, FAT16, or FAT32.

    * Tools

      - tools/mkctags.sh:  A script for creating ctags from Ken Pettit.

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  They are not likely be be
completed soon.

    * kconfig-fronted Configuration:

      - Conversion of old configurations to use the kconfig-frontends
        tool is an ongoing effort that will continue for some time.
        At this time, only 50% of the configurations have been converted
        to use the kconfig-frontends tools.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * File Systems

      - FAT:  In one error return case, the error return value was not being
        set, making the failure look like success. From David Sidrane.
      - mount:  SMART FS must be included in the conditional compilation for
        the set of file systems that require block drivers.  From Daniel
        Palmer.
      - SmartFS: Fixed a minor bug with SMART partition number reporting
        that would only be seen if both partition support and multi-root
        directory support are enabled at the same time.  From Ken Pettit.
      - Deadlock: The inode semaphore must be re-entrant.  Here is the re-
        entrant path that I found:  (1) USB host connects to FLASH drive and
        creates /dev/sda, (2) /dev/sda is mounted, (3) FLASH drive is
        removed but /dev/sda is not destroyed because there is still a
        reference on the device because of the mount, (4) umount() is
        called, taking the inode semaphore, now the driver tries to destroy
        the block driver by calling unregister_blockdriver().  But (5)
        unregister_blockdriver() also takes the inode semaphore causing a
        deadlock if the inode semaphore is not re-entrant.
      - FAT: Fix a typo in the FAT16 formatting logic. Was this ever able to
        format a FAT16 volume?

    * MTD Drivers

      - MTD Partitions:  Fix erase block vs page block confusion. From Ken
        Pettit
      - SST25 Serial Flash:  Improved write performance by fixing a bug that
        prevented operation in the faster write mode.  From David Sidrane.

    * USB Drivers:

      - USB MSC Device:  pthread_join() does not work if called from a
        different task group than the pthread.  This is correct behavior,
        but still a problem.  The correct solution would be configure the
        USB MSC thread to a task, however, this workaround from David
        Sidrane plugs the hole for now.
      - USB CDC/ACM, USB MSC, and Composite Device Classes: Un-initialization
        logic caused re-use of a stale pointer.  Changed to a two pass
        un-initialization for the case of the composite driver:  Memory
        resources are not freed until the second un-initialization pass.
        From David Sidrane.

    * STMicro STM32 Drivers:

      - STM32 F1 USB Device: Fix some errors that cause crashes when the USB
        was disconnected.  From David Sidrane.
      - STM32 F1 USB Device: Correct EP0 state handling logic when buffers
        larger than the EP0 packet size are sent.  From David Sidrane.
      - STM32 F1 USB Device: The long outstanding bug involving the handling
        of OUT SETUP commands has been fixed in the STM32 F1 USB device
        driver by David Sidrane.
      - Kconfig:  Add missing setup of CAN TSEG1 and TSEG2 values.  From
        Martin Lederhilger.

    * Tools

      - tools/mkconfig.c:  SMART FS must be included in the conditional
        compilation for the set of writable file systems.  Noted by Daniel
        Palmer.

    * Applications:

      - apps/platform/Makefile:  Was not dealing with the bin sub-directory
        correctly.
      - apps/system/composite/composite_main.c:  The wrong handle was getting
        nullified.  From David Sidrane.

NuttX-6.33
----------

The 100th release of NuttX, Version 6.33, was made on January 30, 2014,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-6.33.tar.gz and
apps-6.33.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

Additional new features and extended functionality:

    * Core OS Interfaces

      - nanosleep() added.  sleep() and usleep() are no longer core OS
        interfaces.  These have been moved into the library and re-implemented
        as simple wrappers around nanosleep().

    * File Systems

      - procfs restructured by Ken Pettit.  Added files for MTD status.
      - procfs extended to show uptime and task group status.
      - procfs now shows stack information.

    * Networking

      - Add support for the SO_LINGER socket option.  Extended from logic
        provided by Jason Jiang.  Enabled with  CONFIG_NET_SOLINGER.
      - TCP write buffering support added.  From Jason Jiang.
      - Changes from Max Holtzberg to improve how network status is
        reported.  New controls to manage carrier detect.

    * Graphics

      - Massive reshuffling of files with little or no logic changes.   This
        reshuffling was necessary to build graphics applications with the
        kernel builds where the graphics application lie in user space and
        the core graphic server likes in kernel space.  Moved much logic out
        of nuttx/graphics to a new user library, libnx.

    * Cortex-A5/A8/A9

      - Existing Cortex-A5 support updated to include Cortex-A8/9.
      - Add the syscall.h header file needed for the Cortex-A architecture.
      - Start-up logic now supports execution from FLASH with .data and
        .bss in SDRAM.  This was not possible prior to this because .bss
        and .data were initialized before SDRAM was configured.

    * Allwinner A10:

      - Basic support for the Allwinner A10 (Cortex-A8) is in place.

    * Allwinner A10 boards

      - Support for the pcDuino v1 board has been added.  This support
        is not yet very mature and still lacks many drivers.  It is a
        good starting point, however, if anyone wants to develop A10
        support.

    * Atmel SAMA5D3X

      - Start-up logic now supports execution from FLASH with .data and
        .bss in SDRAM.  This was not possible prior to this because .bss
        and .data were initialized before SDRAM was configured.

    * Atmel SAMA5D3X Boards

      - Partial logic in place to support the OV2640 camera.  Still needs
        quite a bit of additional logic to be useful.

    * ARMv7-M

      - Add support for high priority, nested interrupts. This change
        effects not only core ARMv-7M logic, but all ARMv7-M MCU logic:
        LM3S, LM4F,  LPC17xx, LPC43xx, SAM3, SAM4, and STM32. See
        http://www.nuttx.org/doku.php?id=wiki:nxinternal:highperfints

    * STMicro STM32

      - Add clocking support for STM32F107 USB OTG FS (which does not yet
        work)
      - Single-wire UART support for the F1 series from Thomas Grubler.

    * STMicro STM32 Boards

      - The Viewtool board can now be configured to support either the
        STM32F103VCT6 or the STM32F107VCT6.
      - The Viewtool STM32F107VCT6 now supports networking with the
        DP83848C module installed.
      - Add support for Viewtool SSD1289-based LCD on the Viewtool
        STM32F103VCT6 board (untested)
      - Add support for the XPT2046 touchscreen controller on the Viewtool
        LCD module connected to the Viewtool STM32F103 board.
      - Added kernel mode build support for the STM3240G-EVAL board.  Added
        a new kernel mode NxWM build configuration
      - C++ static constructor logic from the nuttx/configs/stm3240g-eval/
        directory to the apps/platform/stm3240g-eval/up_cxxinitialize.c
        where is belongs so that it is available in user-space in the kernel
        mode build.
      - Add native Windows build support for the Olimex STM32 P107.  From
        Max Holtzberg
      - Support for the STM32VL-Discovery board. Contributed by Alan
        Carvalho de Assis
      - Added a configuration for testing simple configurations on the
        PX4FMU v2.

    * ZiLOG ZNEO Boards

      - Add an NSH configuration for the Z16F2800100ZCOG ZNEO board.
      - Added support for the Toyaga 16Z ZNEO board.  The 16Z board is
        based on the ZiLOG ZNEOZ16F2811AL20EG part.  See
        https://github.com/toyaga/16z for further information
      - Developed a patch to work around a compiler error that is revealed
        when building the NSH configuration.

    * Architecture-Independent Drivers

      - OV2640 Camera Driver.
      - Support for the Sharp Memory LCD from Librae.

    * Library

      - Pattern matching logic extended to handle set of characters and
        ranges of character values.  From Ken Pettit.
      - sleep() and usleep() moved intot the C library.  These are not
        longer core OS interfaces; they are simple wrappers for the
        nanosleep().
      - Add an implementation of gets_s().
      - Extend fopen() to include support for C11 exclusive open ("x")
        open mode.
      - Add an implementation of stpcpy()
      - strtol(), strtoll, strtoul(), strtoull(), and strtod() from
        libc/string to libc/stdlib where they belong.

    * Header Files

      - Add rsize_t to include/sys/types.h
      - Add the C11 thread.h header file

    * Configuration/Build System

      - Top level Makefile now supports qconfig and/or gconfig targets that
        may be used for configuration.  These may be used if you build
        kconfig-frontends with support for kconfig-qconf and/or
        kconfig-gconf.
      - Add CONFIG_DEBUG_NOOPT.  Now you can independently enable/disable
        debug symbols and optimization
      - File system related header files moved to include/nuttx/fs
      - Video related header files moved to include/nuttx/video
      - Changes for native Windows build: fix creation of a .version file
        if one does not exist.  Make sure that the APPDIR environment
        variable is set before configuring.  From Max Holtzberg.
      - Board configuration sub-directory can now be specified.  The default
        need not be used.  This is  only useful when CONFIG_ARCH_BOARD_CUSTOM
        is selected and there is no meaningful default sub-directory.
      - Many functions renamed to better conform with the naming standard:
        up_buttoninit() renamed to board_button_initialize(), up_buttons()
        renamed to board_buttons(), up_irqbutton() renamed to
        board_button_irq(), up_ledinit() renamed to board_led_intialize(),
        up_ledon() renamed to board_led_on(), and up_ledoff() renamed to
        board_led_off(). All prototypes removed from board.h header files.
        Now ONLY prototypes in include/nuttx/arch.h.

    * Applications

      - NSH: Refactor. Separate NSH command handling and command execution
        from NSH line parsing.
      - NSH: Will now support multiple commands on a command line, each
        separated with a semi-colon.
      - NSH: Add support of commands enclosed in back quotes as command
        arguments.
      - NSH: Can now handle arguments that are concatenations of constant
        strings, command return data, application return data, and
        environment variables.
      - NSH: Add true and false commands.
      - NSH: Add support for while-do-done and until-do-done loops.  These
        only work when executing a script file because they depend on the
        ability to seek in the file to implement the looping behaviors.
        Can be conditionally compiled out to reduce footprint.
      - NSH: Loosen up if-then-else-fi syntax to allow a command to be on
        the same line as the then or else tokens like:
        "if true; then echo true; else echo false; fi".  More like bash.
      - NSH: Add a break command that can be executed with a loop to
        terminate the loop immediately.

      - system/inifile:  A simple .INI file parser.
      - system/vi:  Add support for a tiny, VI work-alike editor.  This is
        a minimal full screen editor that works with a terminal emulator
        that using VT100 commands.

Efforts In Progress.  The following are features that are partially
implemented but present in this release.  They are not likely be be
completed soon.

    * kconfig-fronted Configuration:

      - Conversion of old configurations to use the kconfig-frontends
        tool is an ongoing effort that will continue for some time.
        At this time, only 53% of the configurations have been converted
        to use the kconfig-frontends tools.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Core OS

      - Added missing sem_timedwait() system call.

    * Networking

      - Prevent tcp_connect callback from being double freed.  From Max
        Holtzberg
      - uiplib:  Support new definitions and state passing for network
        device status. From Maz Holtzberg.

    * File Systems

      - FAT:  (1) A correction to FAT cluster allocation, and (2) Fix to some
        root directory logic that was conditionally done only for FAT 32.
        Apparently this needs to done for all FAT types.  Both from Andrew
        "Tridge" Tridgell via Lorenz Meier.

    * Binary Formats

      - Fix a small memory leak when attempting to load a program from a file.

    * Cortex-A8/9

      - Fix some errors in the cache invalidation logic (only seem to matter
        for Cortex-A8).
      - Add more nop's after enabling the MMU.  The cortex-a8 seems to need
        these

    * Graphics

      - Fix a typo that caused a compilation error when
        CONFIG_NXCONSOLE_BPP < 8.  From Librae

    * ARMv7-M

      - Correct alignment of RAM vector table.
      - Interrupt handling: Do not disable and enable the IRQ on each
        entry, (2) this interferes with controlling the IRQ interrupt
        setting from interrupt handlers, and (3) up_disable_irq() does
        not work anyway so that this has never done anything.
      - Fix all implementations of up_disable_irq() for all Cortex-M3 and
        M4 architectures:  To enable an interrupt on the Cortex-M3/4 CPU,
        you need to set a bit in the ISER register.  To disable the
        interrupt, you need to set a bit in the ICER register.  Existing
        logic was trying to disable interrupts by clearing the bit in the
        ISER register.  That will not work; writing a '0' to the ISER
        register has no effect.  That  means that up_disable_irq() was
        doing nothing!  It turns out that that is not really important
        because up_disable_irq() is not really used for that purpose.  But
        some spurions STM32 ADC interrupts have been reported to me and this
        turned out to be the cause in that case.  Thanks to Manuel St<53>hn for
        the tip.

    * STMicro STM32

      - Fix configuration and pin definitions that would prevent building
        USB for the connectivity and performance lines.
      - STM32L15xx: Fix a typo in USB pin definitions
      - Fix pin definition names for SPI2 MOSI and MISO. Noted by Brian Webb
      - Various fixes for STM32F103ZE SPI3 pin mapping definitions.  From
        Steve Redler IV

    * STMicro STM32 Boards

      - Olimex STM32-P107:  Failed to build if SPI3 for UEXT is not remapped.
        From Max Holtzberg

    * x86 Boards

      - Add a configuration option to select the -m32 compiler option when
        building for a 32-bit target on a native 64-bit compiler.  So far,
        only used for the qemu/i486 configuration.
      - Patch from Matt Campbell to fix 'Error: .size expression for idle_stack
        does not evaluate to a constant".

    * Library

      - strftime(): Needs null termination on the generated string.  From
        Max Holtzberg.
      - Typo in ctype.h macro name: iscntrl(), not iscontrol().
      - If there are no arguments (argc == 1), then getopt() will leave the
        optind variable in an undefined state (2014-1-20).
      - ARMv7-M memcpy(): Assembler changes with the gcc-47 distribution
        from ARM mean that we need to be explicit about branch sizes; one
        or more of the wide branch opcodes results in bad table branching.
        From Mike Smith.

    * Configuration/Build System

      - Fixes for some tools/ for Windows build issues from Max Holtzberg.
      - Config.mk: 'cypath' must be called if we are using a Windows native
        toolchain with the Cygwin 'make' to convert paths to proper
        Windows paths.  From Richard Cochran.
      - ARM Makefile: Dependency directory list is now computed from the
        VPATH.  From Richard Cochran.
      - builtin/Makefile: Fixes for native Windows build from Max Holtzberg.
      - Refactor some configuration dependencies:  NSH networking features
        should depend on netutil selections; netutil selections, in turn,
        should depend on networking selections.

    * Applications

      - NSH: Modified the df -h logic to eliminate truncating numbers in
        conversion (like 7900 -> 7M).  From Ken Pettit.

NuttX-7.1
---------

The 101st release of NuttX, Version 7.1, was made on March 15, 2014,
and is available for download from the SourceForge website.  Note
that release consists of two tarballs:  nuttx-7.1.tar.gz and
apps-7.1.tar.gz.  Both may be needed (see the top-level nuttx/README.txt
file for build information).

  The previous NuttX version was 6.33.  The NuttX minor version number is
  incremented on each release, but the major version number is incremented
  only when an incompatibility with previous versions is included in the
  release.  In this case, the legacy, manual configuration is no longer
  supported by the NuttX build system beginning with NuttX 7.1.  Only the
  newer configurations generated by the kconfig-frontends tools will generate
  viable NuttX configurations.

  All board configurations in the NuttX source tree have been converted to
  use the newer configuration, but if you have some older style configurations
  for you board, you will need to convert those configurations to use the
  kconfig-frontends tools before taking any new code from the repository. See
  http://www.nuttx.org/doku.php?id=wiki:howtos:convertconfig for some
  guidelines.

Additional new features and extended functionality:

    * Core OS:

      - System time logic now includes logic to measure and calculate the
        CPU load percentage (from David Alessio).  This CPU load logic
        extended to keep counts on each thread.  The per-thread CPU is
        now reported in the procfs under <pid>/loadavg  An asynchronous,
        "external" clock may be used to drive the CPU load calculations
        for more accurate measurements when needed.

    * File Systems:

      - As mentioned above, the per-thread CPU load information is now
        reported in the procfs under <pid>/loadavg.
      - Many file system interfaces have been extended to operate on the
        top-level NuttX pseudo filesystem.  These include rmdir, mkdir,
        rename, and unlink.  This capability can be disabled with
        CONFIG_DISABLE_PSEUDOFS_OPERATIONS in order to keep the footprint
        small.

    * Networking:

      - Numerous updates and improvements to the CC3000 driver from David
        Sidrane.

    * Common Drivers:

      - Defined a mouse interface that is very similar to a touchscreen
        interface, but allows reporting of all mouse buttons.  Also, unlike
        touchscreen drivers, mouse drivers need to report positional data
        with no button is pressed so that the mouse position can drive a
        cursor.
      - Added support for a USB HID boot mouse device.  Cursor support is
        not integrated and must be provided by the application based upon
        the reported mouse data.
      - Support added for the MIO283QT9A LCD from Toby Duckworth.

    * Atmel SAMA4E:

      - Added complete architecture support for the Atmel AT91 SAM4E
        Cortex-M4F parts.

    * Atmel SAM4E Board Support:

      - Add board support for the SAM4E-EK board.

    * Atmel SAM4E Drivers:

      - Added logic to manage the Cortex-M Cache Control block.
      - Developed and integrated an Ethernet MAC driver for the SAM4E.
      - Backported the SAMA5 SPI driver to the SAM3/4 architecture.  The
        SAMA5 version supports both multiple SPI peripherals as needed by the
        SAM3A and SAM3X and also supports DMAC (but not PDC) needed by the
        SAM4E.

    * Atmel SAM D20:

      - Added basic architecture support for the Atmel AT91 SAM D20
        Cortex-M0+ parts.

    * Atmel SAM D20 Board Support:

      - Added basic support for SAM D2 Xplained Pro board.  Currently, the
        NuttShell (NSH) works reliably over a serial port.  An SPI driver
        has also been developed.  Work with the SAM D20 has been temporarily
        stopped, however, in order to focus on the SAM4E-EK.

    * TI Tiva TMC4C123G:

      - Added architecture support for the TI Tiva TM4C123G parts.  This was
        merged into the existing support for the LM3S and LM4F families. 
        All directory, file, and function references changed from lm to tiva.

    * TI Tiva TMC4C123G Board Support:

      - Added basic board support for the TM4C123G-Launchpad.  As of this
        release the TM4C123G-Launchpad board support is untested and likely
        incomplete.

    * STMicro STM32 Boards:

      - The Mikroe STM32F4 can now support the newer MIO283QT9A LCD. From
        Toby Duckworth.
      - Miscellaneous changes to better support FPU on STM32F429 Discovery
        from David Alessio.

    * NXP LPC2378 Drivers:

      - Incorporated I2C and SPI drivers for the LPC23xx from Lizhuoyi.

    * QEMU i486 Drivers:

      - New QEMU keyboard and VGA drivers from Lizhuoyi.

    * Documentation:

      - Added a coding standards document.  See 
        http://www.nuttx.org/doku.php?id=documentation:codingstandard

    * Configuration/Build System:

      - A configuration option, CONFIG_DEFAULT_SMALL, was added to select
        default values for configuration variables based upon whether you
        want a smaller footprint or more features.  This is not very useful
        if you are modifying existing configurations because then the
        default values do not apply.
      - CONFIG_DEFAULT_SMALL has been defined on all tiny MCU configurations
        so that they do not grow so rapidly when new, optional features are
        added.
      - The legacy, manual configuration is no longer supported by the
        NuttX build system.  Only the newer configurations generated by
        the kconfig-frontends tools will generate viable NuttX
        configurations.  All board configurations in the NuttX source tree
        have been converted to use the newer configuration, but if you have
        some older style configurations for you board, you will need to
        convert those configurations to use the kconfig-frontends tools. See
        http://www.nuttx.org/doku.php?id=wiki:howtos:convertconfig for some
        guidelines.

    * Applications:

      - NSH can now use an EMACS-like command line editor.  This CLE, is
        really more like the traditional readline than is the default, tiny
        the NuttX readline .
      - The touchscreen example can now be configured to work with either a
        touchscreen or a mouse device.
      - Several NSH commands can now be used to operate on objects in the
        top-level pseudo-filesystem: rmdir, mkdir, mv, and rm.  This
        capability can be disabled with CONFIG_DISABLE_PSEUDOFS_OPERATIONS
        in order to keep the footprint small.
      - If both the CPU load feature and the procfs features are enabled,
        then the NSH 'ps' command will show the CPU load used by each
        thread.

Bugfixes (see the ChangeLog for details).  Some of these are very important:

    * Core OS:

      - task_terminate()  always returned an error because the return value
        was not being set correctly (from Gosha).
      - nanosleep()  Fix a missing call to re-enable interrupts (from Jason
        Jiang).

    * File Systems:

      - Fixed an error in the FAT logic that can cause file corruption.  The
        error conditions are rare and only seen with very large files (from
        Andrew Tridgell).  This replaces a previous, partial fix for the same
        problem.
      - Fixed memory leaks in the NXFFS open() and stat() implementations
        (from Lzyy).
      - The interfaces include opendir(), readdir(), et al, were modified so
        that errors will not be reported if you attempt to list a empty
        pseudo-directory.

    * Networking:

      - Fix one place where the connection reference count was not being
        decremented in the socket close() logic.  This is really a cosmetic
        change BUT when CONFIG_DEBUG_NET is enabled, it will cause assertions.
      - Backed out a small part of the NuttX 6.33 write buffering changed. 
        David G says that this causes problems in connecting to a server.
      - In DHCPD, there was a place where the logic was calling ntohl()
        inappropriately; the address was already in the correct order.  How
        could DHCPD have worked with this bug?

    * TI Tiva/Stellaris Drivers:

      - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
        the LM4F120 Launchpad.
      - Fixed several errors there were unmasked with UARTs > UART2 are
        enabled (grom Gosha).

    * Allwinner A10 Drivers:

      - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
        the pcDuino.

    * NXP LPC17xx Drivers:

      - Fix an compilation error that crept into the LPC17xx USB host driver.

    * STMicro STM32 Drivers:

      - Fix cloned typo in the serial driver:  FLOWCONTROL vs FLOWCONROL.
      - Disable SPI before changing DPI CR1 register (from David Sidrane).
      - stm32 TIM: Set the timer CCMR when selecting timer channel.  From
        David Sidrane.
      - Fix typo in a Makefile: stm32_pwm.c not stm32_psm.c.  Noted by Max
        Kriegleder.

    * Library:

      - More sscanf()  bug fixes from David Sidrane.

    * Header files:

      - cstdbool:  Ignore _Bool8 if CONFIG_C99_BOOL8=y

    * Configuration/Build System:

      - Several changes to restore the broken native Windows build 

    * NuttShell (NSH):

      - Use strncpy vs strcpy in the Telnet console logic to avoid
        overruning the username and password buffers (from Bertold Van den
        Bergh).
      - Add a newline after printing the file in the 'cat' command.  This
        prevents the NSH prompt from be in the same line as the final line
        of the file in the case where there is no newline at the end of the
        file.