nuttx/drivers/wireless/ieee802154/xbee/xbee_mac.h

250 lines
9.8 KiB
C
Raw Normal View History

Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
/****************************************************************************
* drivers/wireless/ieee802154/xbee/xbee_mac.h
*
* Copyright (C) 2017 Verge Inc. All rights reserved.
* Author: Anthony Merlino <anthony@vergeaero.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __DRIVERS_WIRELESS_IEEE802154_XBEE_MAC_H
#define __DRIVERS_WIRELESS_IEEE802154_XBEE_MAC_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/wqueue.h>
#include <nuttx/spi/spi.h>
#include <nuttx/wireless/ieee802154/xbee.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Types
****************************************************************************/
/* Callback operations to notify the next highest layer of various
* asynchronous events, usually triggered by some previous request or
* response invoked by the upper layer.
*/
struct xbee_maccb_s
{
FAR struct xbee_maccb_s *flink; /* Implements a singly linked list */
uint8_t prio; /* RX frame callback priority */
/* Callback for various MLME or MCPS service events. Return value
* represents whether the callback accepts the primitive. >= 0 means the
* callback has accepted the primitive and is responsible for calling
* ieee802154_primitive_free(). In the case of DATA.indication primitive,
* only one callback can accept the frame. The callbacks are stored in
* order of receiver priority defined by the 'prio' field above. All other
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* notifications are offered to all callbacks and all can accept and free
* separately since the primitive will not be freed until the nclients
* count reaches 0.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
CODE int (*notify)(FAR struct xbee_maccb_s *maccb,
FAR struct ieee802154_primitive_s *primitive);
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
};
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Inline Functions
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
* Name: xbee_bind
*
* Description:
* Bind the XBee callback table to the MAC state.
*
* Input Parameters:
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
* xbee - Reference to the XBee driver state structure
* cb - XBee callback operations
*
* Returned Value:
* OK on success; Negated errno on failure.
*
****************************************************************************/
int xbee_bind(XBEEHANDLE xbee, FAR struct xbee_maccb_s *cb);
/****************************************************************************
* Name: xbee_ioctl
*
* Description:
* Handle MAC and radio IOCTL commands directed to the XBee device.
*
* Input Parameters:
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
* mac - Reference to the Xbee driver state structure
* cmd - The IOCTL command
* arg - The argument for the IOCTL command
*
* Returned Value:
* OK on success; Negated errno on failure.
*
****************************************************************************/
int xbee_ioctl(XBEEHANDLE xbee, int cmd, unsigned long arg);
/****************************************************************************
* MAC Interface Operations
****************************************************************************/
/****************************************************************************
* Name: xbee_get_mhrlen
*
* Description:
* Calculate the MAC header length given the frame meta-data. For the
* XBee, we use the header to store the entire API frame for the TX
* request. The size we need is fixed based on the address mode we are
* using as it changes which API frame we need to issue.
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
*
****************************************************************************/
int xbee_get_mhrlen(XBEEHANDLE xbee,
FAR const struct ieee802154_frame_meta_s *meta);
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
/****************************************************************************
* Name: xbee_req_data
*
* Description:
* The MCPS-DATA.request primitive requests the transfer of a data SPDU
* (i.e., MSDU) from a local SSCS entity to a single peer SSCS entity.
* Confirmation is returned via the
* struct xbee_maccb_s->conf_data callback.
*
****************************************************************************/
int xbee_req_data(XBEEHANDLE xbee,
FAR const struct ieee802154_frame_meta_s *meta,
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
FAR struct iob_s *frame);
/****************************************************************************
* Name: xbee_req_get
*
* Description:
* The MLME-GET.request primitive requests information about a given PIB
* attribute.
*
* NOTE: The standard specifies that the attribute value should be returned
* via the asynchronous MLME-GET.confirm primitive. However, in our
* implementation, we synchronously return the value immediately.Therefore,
* we merge the functionality of the MLME-GET.request and MLME-GET.confirm
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
* primitives together.
*
****************************************************************************/
int xbee_req_get(XBEEHANDLE xbee, enum ieee802154_attr_e attr,
FAR union ieee802154_attr_u *attrval);
/****************************************************************************
* Name: xbee_req_set
*
* Description:
* The MLME-SET.request primitive attempts to write the given value to the
* indicated MAC PIB attribute.
*
* NOTE:
* The standard specifies that confirmation should be indicated via the
* asynchronous MLME-SET.confirm primitive. However, in our implementation
* we synchronously return the status from the request. Therefore, we do
* merge the functionality of the MLME-SET.request and MLME-SET.confirm
* primitives together.
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
*
****************************************************************************/
int xbee_req_set(XBEEHANDLE xbee, enum ieee802154_attr_e attr,
FAR const union ieee802154_attr_u *attrval);
/****************************************************************************
* Name: xbee_req_start
*
* Description:
* The MLME-START.request primitive makes a request for the device to start
* acting as a coordinator. The XBee modules do not support beacon-enabled
* networking!
*
****************************************************************************/
int xbee_req_start(XBEEHANDLE xbee, FAR struct ieee802154_start_req_s *req);
/****************************************************************************
* Name: xbee_req_associate
*
* Description:
* The MLME-ASSOCIATE.request primitive allows a device to request an
* association with a coordinator.
*
* On receipt of the MLME-ASSOCIATE.request primitive, the MLME of an
* unassociated device first updates the appropriate PHY and MAC PIB
* attributes, as described in 5.1.3.1, and then generates an association
* request command, as defined in 5.3.1 [1] pg.80
*
****************************************************************************/
int xbee_req_associate(XBEEHANDLE xbee,
FAR struct ieee802154_assoc_req_s *req);
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
/****************************************************************************
* Name: xbee_req_reset
*
* Description:
* The MLME-RESET.request primitive allows the next higher layer to request
* that the MLME performs a reset operation.
*
* Input Parameters:
* xbee - Handle to the XBee instance
* resetattr - Whether or not to reset the MAC PIB attributes to
* defaults
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
*
****************************************************************************/
int xbee_req_reset(XBEEHANDLE xbee, bool resetattr);
#endif /* __DRIVERS_WIRELESS_IEEE802154_XBEE_MAC_H */