nuttx/libs/libnx/nxmu/nx_cursor.c

/****************************************************************************
 * libs/libnx/nxmu/nx_cursor.c
 *
 *   Copyright (C) 2019 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/types.h>
#include <errno.h>

#include <nuttx/video/cursor.h>
#include <nuttx/nx/nxcursor.h>

#ifndef defined(CONFIG_NX_SWCURSOR) || defined(CONFIG_NX_HWCURSOR)

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nxcursor_enable
 *
 * Description:
 *   Enable/disable presentation of the cursor
 *
 * Input Parameters:
 *   hnd    - The server handle returned by nx_connect()
 *   enable - True: show the cursor, false: hide the cursor.
 *
 * Returned Value:
 *   OK on success; ERROR on failure with errno set appropriately
 *
 ****************************************************************************/

int nxcursor_enable(NXHANDLE hnd, bool enable)
{
  FAR struct nxmu_conn_s *conn = (FAR struct nxmu_conn_s *)handle;
  struct nxsvrmsg_curenable_s outmsg;
  int ret;

  /* Send the cursor enable/disable message */

  outmsg.msgid = NX_SVRMSG_CURSOR_ENABLE;
  outmsg.enable  = enable;

  ret = nxmu_sendserver(conn, &outmsg, sizeof(struct nxsvrmsg_curenable_s));
  if (ret < 0)
    {
      gerr("ERROR: nxmu_sendserver() returned %d\n", ret);
      set_errno(-ret);
      return ERROR
    }

  return OK;
}

/****************************************************************************
 * Name: nxcursor_setimage
 *
 * Description:
 *   Set the cursor image.
 *
 *   NOTE: The NX logic will reference the user image buffer repeatedly.
 *   That image buffer must persist for as long as the NX server connection
 *   persists.
 *
 * Input Parameters:
 *   hnd   - The server handle returned by nx_connect()
 *   image - Describes the cursor image in the expected format.  For a
 *           software cursor, this is the format used with the display.  The
 *           format may be different if a hardware cursor is used.
 *
 * Returned Value:
 *   OK on success; ERROR on failure with errno set appropriately
 *
 ****************************************************************************/

#if defined(CONFIG_NX_HWCURSORIMAGE) || defined(CONFIG_NX_SWCURSOR)
int nxcursor_setimage(NXHANDLE hnd, FAR struct cursor_image_s *image)
{
  FAR struct nxmu_conn_s *conn = (FAR struct nxmu_conn_s *)handle;
  struct nxsvrmsg_curimage_s outmsg;
  int ret;

  DEBUGASSERT(hnd != NULL && image != NULL);

  /* Send the new cursor image to the server */

  outmsg.msgid        = NX_SVRMSG_CURSOR_IMAGE;
  outmsg.image.width  = image->width;
  outmsg.image.height = image->height;
  outmsg.image.image  = image->image;  /* The user pointer is sent, no data */

  /* We will finish the teardown upon receipt of the DISCONNECTED message */

  ret = nxmu_sendserver(conn, &outmsg, sizeof(struct nxsvrmsg_curimage_s));
  if (ret < 0)
    {
      gerr("ERROR: nxmu_sendserver() returned %d\n", ret);
      set_errno(-ret);
      return ERROR
    }

  return OK;
}
#endif

/****************************************************************************
 * Name: nxcursor_setposition
 *
 * Description:
 *   Move the cursor to the specified position
 *
 * Input Parameters:
 *   hnd - The server handle returned by nx_connect()
 *   pos - The new cursor position
 *
 * Returned Value:
 *   OK on success; ERROR on failure with errno set appropriately
 *
 ****************************************************************************/

int nxcursor_setposition(NXHANDLE hnd, FAR const struct cursor_pos_s *pos)
{
  FAR struct nxmu_conn_s *conn = (FAR struct nxmu_conn_s *)handle;
  struct nxsvrmsg_curpos_s outmsg;
  int ret;

  DEBUGASSERT(hnd != NULL && pos != NULL);

  /* Send the new cursor position to the server */

  outmsg.msgid  = NX_SVRMSG_CURSOR_SETPOS;
  outmsg.pos.x  = pos->x;
  outmsg.pos.y  = pos->y;

  /* We will finish the teardown upon receipt of the DISCONNECTED message */

  ret = nxmu_sendserver(conn, &outmsg, sizeof(struct nxsvrmsg_curpos_s));
  if (ret < 0)
    {
      gerr("ERROR: nxmu_sendserver() returned %d\n", ret);
      set_errno(-ret);
      return ERROR
    }

  return OK;
}

/****************************************************************************
 * Name: nxcursor_get_position
 *
 * Description:
 *   Return the current cursor position.
 *
 *   CAUTION:  The current cursor position is not updated until the display
 *   is actually changed.  Due to asynchronies caused by queue, the new
 *   current cursor position may not match the cursor position set until
 *   the client and server are syncrhonized.
 *
 * Input Parameters:
 *   hnd - The server handle returned by nx_connect()
 *   pos - The location to return the cursor position
 *
 * Returned Value:
 *   OK on success; ERROR on failure with errno set appropriately
 *
 ****************************************************************************/

int nxcursor_get_position(NXHANDLE hnd, FAR struct cursor_pos_s *pos)
{
  /* REVISIT:  The cursor position is not accessible from here.  It is in hnd,
   * be we don't have the definitions exposed to get it.
   */

#warning Missing logic
  set_errno(ENOSYS);
  return ERROR;
}

#endif /* __INCLUDE_NUTTX_NX_NXCURSOR_H */